Used Vacuum Belt Filter for sale (18,736)

Condition: like new (used), Vacuum machine Manufacturer: Röschermatic Double-chamber vacuum packer Njdjxru H Hjpfx Adwjcl Dimensions: 470x450x180mm Seal bar lenght: 450mm Pump capacity: 63 m³/h Voltage: 380V / 50Hz

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. Nedpfxjyb Rpds Adwjcl The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: new, Type: SC 20 Completely made of special stainless steel 20-liter bowl made of stainless steel Knives speed frequent speed regulation (6 speed) Main cover made of special steel, stainless steel 3 knives in set Machine dimensions in cm: Width: 83 Depth: 63 Height: 91 Electric power: 1,5 kW Njdpfx Aeunakijdwjcl Voltage: 380 V, 50 Hz

Condition: new, functionality: fully functional, total length: 226 mm, total width: 395 mm, total height: 260 mm, type of input current: three-phase, power: 15 kW (20.39 HP), Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 3700 liters Machine dimensions in cm: Length: 226 Nedewd Il Nepfx Adwscl Width: 395 Height: 260 Electric power: 15kW

Condition: like new (used), Tumbler Manufacturer: Eller Capacity: 1500 liters Completely out of stainless steel Nedpfxjx Aygto Adwocl

Condition: like new (used), Vacuum filler VF 608 Ncsdpfx Adjx Aypzjwsl Handtmann Stainless steel Power: 3kW Voltage: 400 / 50Hz

Condition: excellent (used), Levigaltecnica Mikro SR/RTC/1100 Wide Belt Sander Working width: 1100 mm Nedpfxox Tqdto Adwjcl Working height: 3-160 mm Number of sanding units: 2 Unit with rubber roller Combi unit with sanding pad Optical oscillation Electric height adjustment Abrasive belt dimensions: 2150×1170 mm Two feed speeds

Condition: excellent (used), SCM Sandya Uno RCS Wide Belt Sander Ncjdpfx Asx Tpk Ssdwsl Working width: 900 mm Working height: 3–160 mm Number of sanding units: 2 Unit with steel roller Combi unit with pad Abrasive belt dimensions: 930×1525 mm Two feed speeds: 4.5–9 m/min Weight approx.: 1050 kg

Year of construction: 2025, condition: new, functionality: fully functional, COLUMBUS 360° - MOVE | Mobile vacuum press 1. Vacuum Press: A reliable base you can trust. The press is the technical core of the system. Built for generations: durable, robust, low-maintenance — backed by a lifetime warranty (excluding wear parts). MOVE — the high-precision vacuum press with a gigantic usable area for vacuum shape bonding and vacuum veneering of curved workpieces. With extensive flexibility, due to absolute mobility and revolutionary folding mechanism, to reduce the floor space to 45 % when folded. Technology: Membrane fast-change system Gas springs for flap opening Highly elastic natural rubber membrane (up to +130 °C) Stable phenolic resin worktop (up to +120 °C), glued 15 times 40 m³ high-performance vacuum pump (up to 900 mbar (9 t / m²)) from BECKER Nsdpfxeyax Ais Adwjcl optional, automatic switch-off when pressure is reached (with large vacuum volume) Pressure regulation 400 to 900 mbar, analog vacuum pressure gauge Connection for external vacuum bag Feet including smooth-running swivel castors FESTO pneumatics and SIEMENS electrics Technical data and dimensions: Usable area: approx. 3050 x 1350 mm Dimensions inside the frame: approx. 3130 x 1430 mm Overall dimensions: approx. 3700 x 1700 x 1100 mm Overall dimensions (folded): approx. 3700 x 770 x 1770 mm Electrical connection: 1~, 0,8/1,0 kW, 230 VAC +/- 10%, 50/60 Hz Weight: 670 2. Digital Master Manual: Expertise that builds confidence. More than a manual — it’s your daily companion. Over 50 years of concentrated experience, clearly structured and easy to apply. Ideal for both beginners and professionals. 3. Master GPT: Support that never sleeps. Whether operation, material selection, build-ups or process optimization — with AI support, you’re never on your own. Delivered with a ready-to-use tablet for instant access. Note: The number of queries allowed per day depends on your agreement with ChatGPT.

Year of construction: 2025, condition: new, COLUMBUS 360° - PIONEER 1. Vacuum Press: A reliable base you can trust. The press is the technical core of the system. Built for generations: durable, robust, low-maintenance — backed by a lifetime warranty (excluding wear parts), a high-precision vacuum press with a gigantic usable area for vacuum shape bonding and vacuum veneering of curved workpieces. 2. Digital Master Manual: Expertise that builds confidence. Ncedpfx Ajyaxy Uedwsl More than a manual — it’s your daily companion. Over 50 years of concentrated experience, clearly structured and easy to apply. Ideal for both beginners and professionals. 3. Master GPT: Support that never sleeps. Whether operation, material selection, build-ups or process optimization — with AI support, you’re never on your own. Delivered with a ready-to-use tablet for instant access. Note: The number of queries allowed per day depends on your agreement with ChatGPT. The modular design allows the machine to be adapted to current needs. Available in 3 sizes from stock.

Year of construction: 2025, condition: new, COLUMBUS 360° - PIONEER BASIC | Vacuum press | Size L 1. Vacuum Press: A reliable base you can trust. The press is the technical core of the system. Built for generations: durable, robust, low-maintenance — backed by a lifetime warranty (excluding wear parts), a high-precision vacuum press with a gigantic usable area for vacuum shape bonding and vacuum veneering of curved workpieces. Technology: Membrane fast-change system Gas springs for flap opening Highly elastic natural rubber membrane (up to +130 °C) Stable phenolic resin worktop (up to +120 °C), glued 15 times 40 m³ high-performance vacuum pump (up to 900 mbar (9 t / m²)) from BECKER optional, automatic switch-off when pressure is reached (with large vacuum volume) Pressure regulation 400 to 900 mbar, analog vacuum pressure gauge Connection for external vacuum bag Feet including smooth-running swivel castors Nodjyaxybjpfx Adwecl FESTO pneumatics and SIEMENS electrics Electrical connection: 3~, 1,25 kW, 190-255/330-440 VAC, 50 Hz (3~, 1,5 kW, 190-290/330-500 VAC, 60 Hz) Dimensions: Usable area: approx. 3050 x 1350 mm Dimensions inside the frame: approx. 3130 x 1430 mm Max. workpiece height: approx. 600 mm Overall dimensions: approx. 3700 x 1640 x 1080 mm Weight: approx. 680 kg 2. Digital Master Manual: Expertise that builds confidence. More than a manual — it’s your daily companion. Over 50 years of concentrated experience, clearly structured and easy to apply. Ideal for both beginners and professionals. 3. Master GPT: Support that never sleeps. Whether operation, material selection, build-ups or process optimization — with AI support, you’re never on your own. Delivered with a ready-to-use tablet for instant access. Note: The number of queries allowed per day depends on your agreement with ChatGPT.

Year of construction: 2025, condition: new, functionality: fully functional, The vacuum bag for professionals and handymen - DIRECTLY FROM THE INVENTOR Vacuflex is the ideal vacuum bag for professional users who want to profitably produce exceptional workpieces made of wood or wood-like materials. The robust and fabric-reinforced material guarantees longevity even when used at the highest level. Thus, the vacuum bag fits perfectly into professional production processes. With Vacuflex, you are able to extend your product range extremely, achieve better results in the production process significantly and inspire your customers with short production times. Vacuflex is the number one choice when it comes to manufacturing very large workpieces in the fastest way possible. For this reason, it is also ideal as a complement to vacuum presses and gives you the certainty that you can always cover the widest possible range of production processes cost-efficiently without suppliers. Nedpfx Adsyaxxkowscl With this system, which has been tried and tested for over 40 years, hundreds of users have already been able to achieve extraordinary results in production and sustainably increase their success through the use of vacuum technology. It is ready for use very quickly and amortizes itself in a short period of time, even at low utilization.

Year of construction: 2026, condition: new, INFINITY - the vacuum press system in special lengths The Columbus INFINITY is the new and groundbreaking vacuum press system that can be constructed in the length desired by the user on request. The specially created and eponymous Infinity Principle, according to which the usable area in terms of length can be increased very cost-effectively almost to infinity, is used in each individual component. The system offers both maximum flexibility and maximum efficiency, because where the Infinity Vacuum Table and the Rolling Membrane System offer infinity, the Multi-Zone Suction guarantees maximum control. Thanks to this Multi-Zone Suction, only that section of the usable area that is currently in use is vacuumized. INFINITY is perfect for all users who value an infinite usable area for a wide variety of special pressing with maximum yield volume. Directly from the manufacturer - including warranty! Execution: Length and width on customer request! Table base made of stable, welded metal construction, adjustable table feet. Ncsdpfxoyaxw Hj Adwsl The table material is a 21 mm thick birch plywood board. An approx. 15 mm wide vacuum suction groove is milled on the table surface to seal the membrane. The membrane is wound onto a reel and is manually unrolled onto the table surface using a very smooth-running linear slide. The cavities of the table frame serve as vacuum buffer storage. The vacuum pump has an output of 80 m³/hour. The table surface has several suction grooves, these are divided into 5 suction zones. The table load is about 200 kg / m

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: 16109, Electrotherm HL-36x50-EQ-2 Vacuum Furnace Chamber (1997) Stokes Vacuum Pump System Digital Display Controller Njdpfx Aox Ap N Redwscl Slide Rail Track Part Entry Cart 1300 Max Temp Sublocation - Heat Treatment area.

Condition: excellent (used), Catalogue number 7871 TECHNICAL DATA - Maximum workpiece width: 1300mm - Maximum workpiece height: 170mm 2 sanding units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller + segmented shoe + metal roller – From above: 2 pressure feed rubber rollers Nodpfx Adjx U Urqowscl First unit: - Pressure rubber roller Second unit: - Pressure rubber roller - Cleaning brush - Pressure rubber roller – From below: - 3 slip rubber rollers - Conveyor belt - 3 slip rubber rollers - Pneumatic belt oscillation with photoelectric sensors - Electric table elevation - Pneumatic brake - Stepless feed speed adjustment via gear motor - Vacuum pump - Main motor: 15kW - Feed motor: 1.5kW - Pump motor: 4.6kW - Working pressure: 6-8bar - Extraction port diameters: 2x150mm, 2x80mm, 4x70mm, 120mm - Overall dimensions (L/W/H): 1700x2250x2400mm + pallet - Transport dimensions (L/W/H): 1700x2250x2140mm + pallet - Weight: approx. 2000kg ADVANTAGES – Made in Italy – 2 sanding units – Segmented shoe – Vacuum pump – Not repainted – Used sander, in very good condition Net price: 39,900 PLN Net price: 9,500 EUR (depending on the exchange rate of 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7861 Nsdpox U Tnqjfx Adwocl TECHNICAL DATA - Workpiece length: 2500 mm - Workpiece width: 800 mm - Main motor approx. 4 kW - Grinding belt width: 170 mm - 2 speed settings - Extraction port diameter: 2x120 mm - Overall dimensions (L/W/H): 3640x1220x1500 mm - Weight approx. 800 kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Used sander, in very good condition Net price: 6900 PLN Net price: 1640 EUR at an exchange rate of 4.2 PLN/EUR (Prices may vary with significant exchange rate fluctuations)

Condition: used, tank capacity: 22 l, GENERAL INFORMATION Design: vertical Speed: 32 - 150 RPM Heating/Cooling: available Power: 0.37 kW Max. permissible operating temperature: 120 °C Max. permissible operating pressure: 4.0 bar Agitator: anchor agitator Agitators: 2 agitators Agitator element: homogenizer Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 22 liters Double jacket volume: 2.0 liters Condition: used Previous application: cosmetics TANK Max. permissible operating temperature: 99 °C Bottom: conical bottom Support type: frame Nsdpfx Aexqbb Iodwscl AGITATOR Voltage: 380 volts Agitator position: centered on the upper head Agitator equipment: anchor agitator with Teflon scrapers; the drive power of 7.5 kW stated on the nameplate likely refers to the homogenizer AGITATOR 2 Agitator position: lower bottom

Condition: used, Year of construction: 2009, type of input current: three-phase, overall weight: 200 kg, suction capacity: 2,000 m³/h, filter area: 10 m², negative pressure: 2,300 Pa, Equipment: documentation/manual, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum for sandblasting, soda blasting, shot blasting and for all types of dry dust. Brand: Pionier Model: Entstauber PF-2B The filter is cleaned with compressed air pulses during operation, ensuring high device efficiency. Fan located on the clean side, minimizing explosion risk. Specifications: Capacity: 2000 m3/h Vacuum: 2300 Pa Filter surface area: 10 m2 Ncedpoxnmw Nefx Adwel Cartridge filter element. Motor power: 1.5 kW Inlet diameter: 180 mm HEPA filter, filtration class H13 Year of manufacture: 2009 Stock number: 1057

Condition: used, Year of construction: 2021, Overview  The filler + capper block was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to process explosive products. The machine can be purchased with warranty.  Technical data  Fully automatic rotary filler Filling system: mass flow meter system, type: Endress+Hauser LPG MASS Number of filling stations: 16 filling stations Max. container dimensions: Height: 50-300 mm, Ø: 20-100 mm Pressurized feed tank for constant flow through flow meter  Below level filling to avoid foam formation during filling  Adjustable bottle neck centering  Electr. level measurement  CIP capable  Designed for riser pipe processing Fully automatic round capper Number of capping heads: 5 With torque adjustment via slip clutches With fully automatic cap sorting and cap feeding via BONINO disc sorter with elevator With inside drop switch to switch off the machine in case of missing closures Cap hopper  Cap control Ncedpfxsmk I Dte Adwjl

Condition: used, Year of construction: 1999, Overview  The Sensometic vacuum filler was built by Krones in 1999. The offer also includes rinser, Alcoa cappers and a blocked labeler. The machines can be inspected at any time.   Technical details  Output  12,000 bottles/h with 0.7l glass bottle  10,000 bottles/h with 1.0l glass bottle  6,000 bottles/h with 1.5l PET bottle  Formats  0.7l glass bottle  1.0l glass bottle  1.5l PET bottle  Plastic closure  Screw cap 28 mm  Push-on cap  Label  Body, back, neck loop, neck ring  Bottling product  Raspberry and various fruit syrups   Special hesperide vinegar   Filling temperature: 25°C   Running direction: L-R   Siemens S5   Scope of delivery  Rinser | Krones | Variojet | 3-channel rinser; steam, sterile water, air  Vacuum filler | Krones | Sensometic |   Capper | Alcoa | PP 10 / 360   Capper | Alcoa | K 10 / 360  Cold glue labeler | Krones | Prontomatic   Ncsdpfxsukkvnj Adwjl

Condition: used, Year of construction: 2018, Overview  The gravity filling machine is a rotating machine that works automatically and is suitable for filling bottles, cans made of zinc sheet or jars. It is used to add liquids (such as brine, oil, vinegar, sauce, sugar water, etc.) into containers filled with solids. It is also used to fill empty bottles. The filler block can be viewed at any time.  Technical details  Number of filling places: 48  Pitch circle diameter: 1560 mm  Capacity (last):  250- 300 bottles/ min at 500ml fruit syrup. For used twist-off cap an additional capper would have to be organized  160 - 200 bottles/ min at 250ml maple syrup  Used plastic cap can be applied by installed AROL capper  Dimensions  Length: 3.000 mm Width: 2.500 mm Height: 2.500 mm Weight: 6.500 kg   Electr. characteristics Voltage: 400 V - 50 Hz  Auxiliary voltage: 24 V DC  Installed power: 20 kW  Scope of delivery  Filler | Zilli& Bellini | GD48/12 | 2018 Capper | Arol | TSI - EURO VP - W6 | 2018 Ncsdpsnhikijfx Adwel

Condition: used, Year of construction: 2008, Overview  The filler and capper block was manufactured in 2008 by the Italian company CFT. This machine can be used to fill edible oil into various containers (PET bottles or aluminum canisters).  Techn. details  Filler | CFT | RVAR 6/10 | 2008  Filling temperature: 10-30°C  Number of filling stations: 6  Processable formats:  Tinplate canisters: 1l, 3l, 5l PET bottles: 1l, 2l, 3l, 5l, 10l  Output:  3,500 bph - 1L PET Filling opening. 20 mm 3.000 bph - 2L PET with filling opening 28 mm 2,500 bph - 3L PET with filling opening 32 mm 2.500 bph - 5 L PET filling opening 40 mm 2,200 bph - 5 L perforation 32 mm 1,100 revolutions per hour - 10 L PET hole 40 mm Filling accuracy 1 σ = 0.6 g Machine pitch diameter 720 mm Machine pitch 377 mm Max. diagonal treatable container 220 mm Max. height of treatable container 460 mm Capper | CFT | TA / 3 | 2008  Application of plastic caps  Machine pitch 377 mm Diameter 360 mm Number of capping heads 3 Including feeder for the capping heads Nedpfx Asmrpv Dedwjcl

Condition: used, Year of construction: 2019, Overview  This vacuum filling and capping monoblock was manufactured in 2019 by the German company ALWID Maschinenbau GmbH. The model ALWID-SUPERIOR-48HV-10PP is designed for level filling of glass bottles using a high-vacuum system, making it ideal for low- to medium-viscosity liquids such as spirits or similar products. The system features 48 filling valves and a 10-head ROPP capping unit, ensuring efficient, high-precision operation. With a performance of up to 12,500 bottles per hour (0.7 L), it offers a professional solution for high-speed bottling lines. The machine is CIP-capable, equipped with spray balls, and includes a Siemens S7 control system. It has approximately 14,000 operating hours and is already dismantled. Missing peripheral components such as the cap sorter, bunker conveyor, and chutes can be procured upon request and a factory overhaul is also available upon demand. Technical data  Filling system: High-vacuum with liquid ring pump Capping system: 10-head ROPP (PP) closer Capacity: Up to 12,500 bph (0.7 L bottles) Filling valves: 48 Bottle size: Max. 105 mm (W) × 65 mm (D) for shaped bottles (every second valve used) Control system: Siemens S7 Cleaning system: CIP with spray balls Operating hours: Approx. 14,000 h Working direction: Right to left Dimensions (machine): 4.20 m × 2.80 m × 2.90 m (W×D×H) Dimensions (filling tower): 1.40 m × 1.30 m × 3.40 m (W×D×H) Scope of delivery  Filling and capping block | ALWID Maschinenbau GmbH | ALWID-SUPERIOR-48HV-10PP | 2019 | High-vacuum filler with 48 filling stations and 10 ROPP capping heads, Siemens S7 control system, CIP-capable, approx. 14. 000 operating hours Filling tower | ALWID Maschinenbau GmbH | - | 2019 | 3.40 × 1.30 × 1.40 m, part of the system Format parts | ALWID Maschinenbau GmbH | - | 2019 | 10x PP28x22 mm deep capping heads, 1x format set for 76 mm straight-neck bottle Accessories | 2 EURO pallets with format and head components   Ncsdjxqhvlopfx Adwol

Condition: used, Year of construction: 2020, Overview The tangential filter was manufactured in 2020 by Spanish manufacturer Sefiltra. It can be visited anytime. The structure is made of AISI-304 stainless steel; it has four wheels and a handle for its wheels and a handle for its displacement. All pipes and accessories are made of AISI-316L, Stainless Steel AISI-316L. The system is operated from the SIEMENS KTP 900 color touch screen, which is located on the front of the electrical panel. Techn. Details Capacity: depending on beer type, recently 1,000 – 1,500 litres per hour Unitary filtration surface: 10 m² Two 0.5 micron hollow fiber membranes Dimensions (LxlXh): 1.800 x 950 x 2.300 mm Weight empty: 350 Kg Operating weight: 470 Kg Equipment 1 pc Centrifugal feed pump 3.0 kW 1 pc Recirculation centrifugal pump 4,0 kW 2 pc Diaphragm HF 6043 MF 05 (KDP3358) 1 pc Modulating valve 5 pcs Pneumatic valves 1 pc 100 L CIP tank 1 pc Angle filter 500 microns 3 pc Electromagnetic flowmeters 5 pc Pressure transmitters 1 pc Temperature transmitter 1 pc Level transmitter 1 pc Liquid detector 1 pc Electrical panel with Siemens S7-1200 programmable logic controller and touch screen Siemens 7" touch screen Ncsdpfx Adeqvvpaewol

Condition: used, Year of construction: 2018, Overview The filler and capper was originally built by the Stork company and was overhauled by the ROBAK company in 2018. The machine can be used to fill still beverages into glass bottles. The machine is in excellent condition, currently dismantled and stored in a well-maintained environment. Technical data  Capacity: 7.000 bph Filler is prepared for 700 ml bottles 31,5mm aluminum cap The machine is missing a cap aligner and a cap slide and feeder. These should be made for a specific cap Ncodpfxjmnkhfj Adwjl