Used Vacuum Dry Chamber for sale (7,863)

Condition: used, Year of construction: 2003, functionality: unexamined, power: 400 kW (543.85 HP), temperature: 95 °C, number of chambers: 2, For sale are 2 dismantled drying chambers. Designation: ZLSM-5x1.20-1x3.10-07.72-2-F The drying chamber was designed for drying wooden pallets. Internal length: 8x0.90m + 0.52m Stacking depth: 5x1.20m + 4x0.10m Stacking height: 1x3.10m + 1x0.10m + 0.40m Heating capacity per chamber: 400kW Bdodpfxszyk D Do Andoi The parts shown in the photos are still available. - Various sheet metal and frame parts - Mühlböck MB4000 control system - 2 sliding doors, each approximately 3.6x7.7m; the buyer must arrange for transportation in advance - 4 heating coils with dimensions 1.30x3.65m - 8 fans, each with 3kW, internal diameter 0.8m, air flow 27500m³/h The insulation has already been removed. The drying chamber is sold as defective and incomplete. Inspection is absolutely necessary!

Condition: used, Year of construction: 1984, functionality: fully functional, power: 4.2 kW (5.71 HP), inner dimension length: 5,300 mm, inner dimension width: 750 mm, inner dimension height: 620 mm, control type: manual, actuation type: electric, fuel type: electric, Equipment: documentation/manual, We are offering this used Lauber I S-6 chamber dryer for drying wood, manufactured in 1984. Dimensions of the stacking chamber: 530 cm long, 62 cm high, 75 cm wide, 2.4 cubic meters, 4.2 kW. Cabinet with side carriage: complete dryer with carriage, high-performance radial fan, electric heating, intake and exhaust flaps, safety thermostat, spraying device, sufficient number of corrugated stacking strips, access doors, internal rails made of aluminum casting, external rail with plastic coating, manual control type A, built-in measuring unit with two wood moisture sensors and one climate sensor. Fully automatic temperature and climate control of the entire drying process according to the pre-selected drying gradient, with two wood moisture sensors and one wood equilibrium moisture sensor. Bdjdpfoz Alhisx Andji If you have any questions or require further information, please send us a message or call us. Inspection is welcome. Sale only to buyers who collect the item themselves! The sale is made with the exclusion of any warranty.

Year of construction: 2007, condition: good (used), functionality: fully functional, Paint drying chamber MEYER AB / Fanmet OY 17m3 Year of construction 2007 )2009 installed ) Manufacturer MEYER OY Finland was used for drying lacquered furniture parts. Feeding with tray trolleys Length 3600mm width 2150mm height 2200mm Bedott Sy Repfx Andodi approx. 17m3 electric heating total power 30 kw 18 heating units, each with 1667W, 400 V (length 2360mm) Air flow: 3m3 /sec or 10,000m3 /hour Inner cladding galvanized sheet steel 2 VEM fan motors ( 3,6kW+0,37kW ) ATEX Thermostat 0-120C Overheating protection 0-210C ATEX compliant 94/9/EC CE marked

Condition: good (used), Vacuum Glass Chamber Exsiccator The glass cylinder and glass lid allow reactions and the behavior of various liquids/substances/products to be visibly tested under vacuum. Easy handling and operation Numerous connection options Volume of 13.9 liters Good and easy cleaning options Weight 14.5 kg Application areas: Laboratories, e.g., for reaction tests under vacuum Production, e.g., drying of components Universities, e.g., for demonstrations Research, e.g., curing of plastics Vacuum Glass Chamber Exsiccator Bsdpedcpapjfx Andjdi Possible accessories/variants: Development Various sizes of glass vacuum chamber available Various pumps for vacuum generation available Heating plate Vacuum feedthroughs Adapters Vacuum hoses Data on the glass chamber Made of safety glass Seal made of Viton Glass lid can be easily removed Articulated plastic feet for a secure stand Leak rate less than 0.1 L/s External dimensions: Ø=320mm x 420mm Internal dimensions: Ø=230mm x 330mm 12 x 1/4 inch connection options

Year of construction: 2014, condition: new, functionality: fully functional, New chamber for manufacturing silicone molds + curing oven. Bjdpfxez Ep U No Andsdi

Condition: new, Year of construction: 2024, I sell the wood drying chamber Logosol WDU Bdodpfx Aozkb Riendsi Including humiditiy measuring unit Elbez WHT 740 Machine NEW, not used before ! Available immeditely.

Condition: used, Edwards Edwards iXH4545H – Industrial High-Vacuum/Dry Pump For sale is an Edwards iXH4545H, MK1 HV MM96 Black EMS version. This unit comes from a technical corporate environment and belongs to the high-performance iXH series from Edwards, which is used worldwide in industrial high-vacuum and coating processes. Device Data Manufacturer: Edwards Model: iXH4545H Version: MK1 HV MM96 Black EMS Weight: approx. 890 kg Technical Data (iXH series) Dimensions: approx. 1,240 × 860 × 1,310 mm (L × W × H) Pumping speed: up to approx. 4,500 m³/h (depending on gas and configuration) Ultimate pressure: < 1 × 10⁻² mbar Inlet: ISO 100 / ISO 160 Outlet: KF 40 / NW 40 Power supply: 400–480 V, 3-phase Power consumption: typ. 12–18 kW Cooling: water-cooled (approx. 6–10 L/min) Description: The Edwards iXH4545H is an industrial high-vacuum/dry pump from the 4500 series. It is typically used in: PVD / CVD coating Semiconductor industry Process chambers / vacuum furnaces Research & Development Applications with high gas load Chemical/corrosive process gas environment The iXH series is known for its high reliability, robust design, and 24/7 operability. Weight: approx. 890 kg Condition: used Bsdpozixyfsfx Andodi Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Year of construction: 2004, condition: excellent (used), GRAEWE - SANDERN 2 CHAMBERS UNDERWATER VACUUM CALIBRATION TANK V-32-2-3, 3 meters long 2-chamber tank with 2 bypass filters Year of manufacture 2004 Bedpfeyc E Nnox Andjdi Without spraying / Full immersion calibration tank Electric feed, forward and reverse

Condition: used, Year of construction: 2013, Claw Vacuum Pump Dry Manufacturer: Busch Type: Mink MM 1502 AV V8 Motor: DS 400V Suction capacity: 500/580 m³/h Bjdpsv I Agdsfx Andedi Ultimate pressure: approx. 200 mbar (abs.) Accessories: Intake filter; Operating instructions Delivery time: Short term

Condition: new, ULVAC Dry Vacuum Pump Here we offer a ULVAC dry vacuum pump. ULVAC Dry Vacuum Pump Solution for demanding process applications Dry vacuum pump ULVAC's unique approach to utilizing the latent heat within the pump body enables the LR/HR/UR series to deliver performance even in the most demanding processes. ULVAC has focused its design efforts on maintaining an extremely uniform high temperature across all pump stages, optimizing this pump family for CVD and etching applications. Compatible with the ULVAC ECO-SHOCK system for additional energy savings. Features The LR series pump is designed for load-lock chambers and PVD processes. ULVAC's unique aluminum design enables a very uniform temperature distribution throughout the pump body: The ULVAC LR series pump is designed for applications that require a heated pump, heated gas lines, and/or heated exhaust lines. Excellent helium pumping capacity Encapsulated motor for safety and ease of maintenance Withstands power interruptions of up to 500 ms. Internal components are specially treated to ensure a high degree of surface hardness and excellent corrosion resistance. This prevents wear of internal pump parts when exposed to corrosive gases. (LR Series) Designed for process gases that generate powdery by-products, such as Si crystal growth furnaces Pre-pump for turbo-molecular and mechanical booster pumps Type: LR600 Condition: new Scope of delivery: (See picture) (Changes and errors in technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone. Bdjdpfx Anozdqtgsdji

Year of construction: 2021, condition: as good as new (ex-display), Rotary vane vacuum pump – dry running Manufacturer: Becker Type: VTLF 2.250 Motor: 400V/50Hz Suction capacity: 250 m³/h Ultimate pressure: 200 mbar (absolute) Bedpfohmfraex Andjdi Corresponds to 90% vacuum Status: New Delivery time: in stock

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 060308, functionality: fully functional, power: 6.9 kW (9.38 HP), input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 40 °C, number of chambers: 1, control type: PLC-controlled, Equipment: CE marking, documentation/manual, GIARDINA MOS® 3D Static Microwave Drying Chamber Professional static drying system designed for the drying of coated wooden components, particularly for water-based coatings. The GIARDINA MOS® 3D technology uses microwave energy for controlled and homogeneous three-dimensional drying. After removal of the water component from the coating, a low-temperature hot-air circulation phase completes the drying and curing process. The system is suitable for three-dimensional and assembled wooden components, including furniture, chairs, window and door components, profiles and turned parts. Technical data: Manufacturer: GIARDINA FINISHING S.r.l. Model: MOS® 3D Year of manufacture: 2006 Serial number: 060308 Electrical power: 6.9 kW Supply voltage: 400 V Frequency: 50 Hz Rated current: 19 A PLC controlled Bodpfxjztvf Ts Andsdi Air recirculation motor: 3 kW / 4 HP CE marked Original operating and maintenance documentation as well as electrical diagrams are available. The machine was recently taken out of production and is currently dismantled and stored in a dry warehouse. It was in regular operation prior to being taken out of service.

Condition: new, Year of construction: 2026, Dry rotary vane vacuum pump. Marpa Vacuum brand pump Pump completely new. 12 months warranty. Nominal flow: 80 m3 / h at 50Hz. Bdsdoftzkqopfx Andsi Final vacuum: 150 mbar abs. Any clarification, do not hesitate to contact us.

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, Vanicek drying chamber with post rack trolley with in- and out-swing gates with control system and electrical control cabinet Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Bodpfowxdqkex Andodi Fan VMR 71-05-4, E-motor 1.1 kW/400V Dehumidification Ø 50, with actuator Dehumidification Ø 40, with actuator UGL sensors, humidification, heating valve (to be provided by client) Switchgear, heating coil, fan frame Stacking dimensions 1x12.5 m, 2x1.2 m, 2x1.0 m

Condition: excellent (used), machine/vehicle number: 577EK51, REF: MM6187 1 x Webomatic double chamber vacuum packing machine supplied with 16 x filler plates. Technical specification ⚙️ ✅ Model - ED 120. ✅ Serial number - 577EK51. ✅ Sealing bars - 4 x 640mm long. Bdodexn Rz Ejpfx Andsi ✅ Distance between sealing bars - 580mm. ✅ Vacuum pump - Busch RA 0100 E 5Z1. ✅ Electrical requirements - 400 V / 50 hz / 3 phase. ✅ Power - 2.2 kW / 5.4 Amps.

Condition: good (used), Year of construction: 2018, temperature: 95 °C, inner dimension length: 7,700 mm, inner dimension width: 10,000 mm, inner dimension height: 3,200 mm, total length: 10,026 mm, total width: 10,230 mm, total height: 4,710 mm, number of chambers: 3, control type: manual, actuation type: electric, fuel type: electric, # For Sale – Hamech SK-185 Industrial Wood Drying Kiln Complex (3 Chambers) For sale: Complete Hamech SK-185 industrial wood drying kiln complex, consisting of 3 drying chambers. The installation was commissioned in 2018 and is CE certified. The drying kiln complex is still in continuous operation and can be inspected while running at our facility. Bsdpfxj Afx Nqs Andjdi ### General Information - Manufacturer: Hamech - Model: SK-185 - Number of drying chambers: 3 - Year of commissioning: 2018 - CE certified ### External Dimensions (per chamber) - Width: 10.23 m - Depth: 10.26 m - Height: 4.71 m ### Internal Chamber Dimensions - Width: 10.00 m - Depth: 10.03 m - Height: 3.20 m ### Maximum Loading Space Dimensions - Width: 10.00 m - Depth: 7.70 m - Height: 3.20 m ### Technical Specifications (per chamber) - Maximum drying temperature: 95°C - Maximum heating system pressure: 0.6 MPa - Humidification system pressure: 0.2–0.3 MPa - Average thermal power consumption: 345 kW - Electrical power consumption: 25.5 kW - Humidification system capacity: 210 l/h - Loading volume: 148 m³ Detailed technical specifications are available upon request. Location: Andrychów, Poland Feel free to contact us for more information or to arrange an on-site inspection. The drying kiln complex can be viewed during operation.

Condition: used, VC999 single-chamber vacuum packaging machine – pre-owned Mobile single-chamber vacuum machine from VC999 (Inauen Maschinen AG, Herisau, Switzerland), stainless steel floor model on castors with an oil-lubricated VACFOX rotary vane pump. Key features - One spacious vacuum chamber with a raised filling plate to set the product height - Seal bar across the full chamber width, suitable for bags up to the full width of the chamber - Oil-lubricated VACFOX rotary vane pump: deep final vacuum and a long service life - Mobile floor model on castors, easy to move around the production floor - All-stainless housing, built to take daily cleaning - Digital control with programme memory: vacuum, seal and venting times stored per product Applications - Meat and cured meats - Fish and seafood - Cheese and dairy - Ready meals - Butchers, fish processors and foodservice Bdedpsz Hqycsfx Andoi Benefits - Extends the shelf life of the product - Protects quality and freshness - Swiss build quality, made for intensive use - Mobile, so you can use it wherever it is needed - STC keeps parts for vacuum machines in stock Located in Emmeloord, the Netherlands. Available immediately – price on request. More photos and full details on our website: [](/) Machine type: Single-chamber vacuum machine Condition: Pre-owned Design: Mobile floor model on castors Vacuum pump: VACFOX rotary vane, oil-lubricated Seal bar: One seal bar across the full chamber width Material: Stainless steel Origin: Inauen Maschinen AG, Herisau (Switzerland)

Condition: excellent (used), functionality: fully functional, We offer the KOMET PowerVac 200 double-chamber packaging machine—a professional device for vacuum packaging food products in meat processing plants, food processing facilities, the food service industry, and food processing operations. Bdedpfxey Snpqe Andoi This model belongs to the double chamber model series, i.e., two-chamber machines that perform well where smooth operation, high efficiency, and consistent seal quality are essential. KOMET PowerVac 200 has a chamber measuring 580 x 760 x 215 mm, and the maximum recommended bag size is 400 x 700 mm. As standard, the machine is equipped with 2 sealing bars, each 420 mm long. The machine operates on a 400V, 3Ph+N+PE, 50Hz power supply, with parameters of 4.807 A and 1.6698 kW. Technical specifications: Manufacturer: KOMET Model: PowerVac 200 Type: dual-chamber packaging machine Power: 1.6698 kW Power supply: 400V, 3Ph+N+PE / 50Hz, 4.807 A Chamber dimensions: 580 x 760 x 215 mm Seal length: 2 x 420 mm Maximum bag size: 400 x 700 mm Pump: 40 m³/h External dimensions with lid closed: 1340 x 900 x 1170 mm External dimensions with lid open: 1340 x 900 x 1450 mm Weight: 335 kg standard Key advantages of the KOMET PowerVac 200 packaging machine dual-chamber design for efficient vacuum packaging, chamber dimensions: 580 x 760 x 215 mm, wide double seal, stainless steel and durable construction, program-controlled operation with a sensor, a solution for facilities requiring repeatability and reliability.

Condition: used, PD2052-AC2 / PD2052 AC2 / PD2052AC2, PR1800 + PD500, Hanbell Precise Machinery Co. LTD – Dry screw vacuum pump with display Model: PD2052-AC2 Bdedpfjitywrox Andoi Type: PR1800 + PD500 Condition: Used

Condition: used, Conveyorized chamber vacuum packaging machine for industrial food processing This VC999 K7B2 is a conveyorized chamber vacuum packaging machine, built by VC999 Verpackungssysteme in Switzerland, with a stainless steel, all-enclosed construction that avoids sharp edges and corners where dirt could collect. The machine runs two to three cycles per minute and features bi-active sealing bars with electronic temperature control and adjustable contact pressure, allowing secure sealing even with greasy or moist products. The B-version adds a perforation blade with bag waste suction on both sides, so trim is removed automatically during the cycle. Evacuation stops at the evaporation point, protecting product quality throughout the process. Located in Emmeloord, the Netherlands. Immediately available, price on request. Bdjdpfxjz Nc Nnj Andji More photos and full specifications: / Type: Conveyorized chamber vacuum packaging machine (belt) Output: 2–3 cycles per minute Sealing: Bi-active sealing bars, electronic temperature control, adjustable contact pressure Trim removal: Perforation blade with bag waste suction on both sides (B-version) Vacuum control: Evacuation stops at the evaporation point Construction: Stainless steel, all-enclosed

Condition: used, Year of construction: 2000, functionality: fully functional, operating hours: 0 h, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 60 °C, inner dimension length: 12,500 mm, inner dimension width: 1,750 mm, inner dimension height: 2,000 mm, total length: 13,000 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 4,000 kg, number of chambers: 1, number of shelf rows: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Good convection drying chamber with axial airflow, fan, and heating coil at the top and rear. Can be inspected at any time. Bedpfxszz Saps Andodi Functional.

Year of construction: 2013, condition: used, Drying chamber / Circulating air drying chamber / Wood drying chamber / Drying plant Mühlböck VLSM2120 External dimensions: Length: 7.1 meters Depth: 4.4 meters Height: 5 meters Internal dimensions: Length: 6.4 meters Depth: 3 meters Height: 4.2 meters Technical data: Year of construction: 2013 Heating capacity: 102 kW Flow temperature: 90 degrees Water quantity: 6 m3/h Bjdpfx Aewpfwyondjdi Electrical connected load: 4 kW Fans: 3x1.1 kW optionally with wood chip heating system

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, power: 190 kW (258.33 HP), input voltage: 400 V, input current: 13 A, type of input current: AC, temperature: 95 °C, inner dimension length: 10,000 mm, inner dimension width: 3,000 mm, inner dimension height: 3,300 mm, total length: 10,500 mm, total width: 4,000 mm, total height: 3,800 mm, fuel type: electric, Equipment: CE marking, documentation/manual, Drying chamber / Recirculating drying chamber / Wood drying chamber / Drying system Mühlböck QLSF2120 Technical data: Year of construction: 2007 Heating capacity: 190 kW Bdedpfx Asy Sxw Eendei Supply temperature: 95 degrees Electrical connection: 13A Fans: 6 x 0.75 kW

Year of construction: 2013, condition: used, Claw vacuum pump Bdjdpfjcfw Tnox Andji Dry-running Manufacturer: Busch Type: Mink MM 1252 AV Motor: DS 400V Suction capacity: 250/300 m³/h Final pressure: approx. 100 mbar (abs.) Accessories: Suction filter; Operating manual Delivery time: short-term

Condition: used, functionality: unexamined, machine/vehicle number: AA40 WN, overall weight: 240 kg, volume flow: 42 m³/h, input voltage: 220 V, Used Ebara AA40 WN Dry Vacuum Pump Manufacturer: Ebara Model: AA40 WN Ultimate Pressure: 0.2 Pa Bdsdpfx Ansxlikmedei Capacity: 4200 L/min Power: 200/220 Volt, 50/60 Hz (3Ph.) The Ebara AA40WN dry pumping system is a microprocessor-controlled, modular dry pump package that offers exceptional control and monitoring capabilities. The AA40WN pump system can be locally operated via a handheld or mounted LCD control panel.