Used Vacuum Dry Chamber for sale (7,864)

Condition: used, Vötsch Type: VBT 03/500 Air-cooled, with separate cooling unit Material testing chamber with water flooding and spraying system for freeze-thaw cycling tests The Vötsch VBT 03/500 is suitable for testing the frost and temperature resistance of construction materials such as concrete, bricks, clinker, natural stone and tiles. Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in the steady state according to IEC 60068-3-5, depending on the test chamber temperature Time-dependent ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min Cooling: approx. 2 K/min Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the support grid Water level = 0 mm The water level is at the top edge of the support grid Data for standard spraying system Number of spray nozzles 6 Spray rate per nozzle 0.5 l/min Data for spraying system according to EN 539-2, Method B Bodpezh D S Rjfx Agksdi Number of spray nozzles 6 Spray rate per nozzle 4.5 l/min Additional flooding nozzles 2 Spray rate additional nozzle 6 l/min Compressed air consumption approx. 3 m³/h Data for water tank with preheating Volume approx. 2000 l Temperature range for preheating +5°C to +40°C Temperature change duration Cooling from +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Additional cooling unit: Manufacturer: Alfa Laval Type: ACL501AS BO 2L Year of manufacture: 2009 Weight: 140 kg Design: Unit with fan Data for installation and operation: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left Test chamber volume: approx. 500 liters Refrigerant R-404a Electrical connection: Rated voltage 3/N/PE AC 400V ± 10% 50Hz Rated power approx. 26 kW Rated current approx. 44.0 A (neutral conductor loaded) Fuse 63 A gG, to be provided by the customer Weight approx. 890 kg net For your safety as a buyer, please note the following: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Vötsch   Type: VCS³ 7027-10   Vötsch climate testing chamber, water-cooled With a temperature change rate of 10 K/min   Data for temperature testing: Temperature range: -72°C to +180°C Temporal temperature deviation in the center of the usable space: ± 0.3 K to ± 0.5 K Bdodpfozh Huusx Agkei Spatial temperature deviation: ± 0.5 K to ± 2.0 K   Temperature change rate Heating: 10 K/min Cooling: 14.5 K/min   Data for climate testing: Temperature range: +10°C to +95°C (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours) Temporal temperature deviation in the center of the usable space: ± 0.2 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation in the center of the usable space: ± 1% to ± 3% RH Humidity range: 10% to 98% RH (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours)   External dimensions: Width 780 x Depth 1895 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 615 x Height 750 (mm) Test chamber volume: approx. 270 liters   Side opening: 50 mm Side opening: 125 mm   Data for operation: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ± 10%, 50 Hz Rated power: 14 kW Rated current: 26 A Fuse, on customer’s side: 63 A, slow-blow   Refrigerant: R404A/R-23   Weight approx. 835 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: used, Weiss   Type: WT3-600/40   Weiss temperature test chamber with S!MCON / 32 control, air-cooled   (Refrigerant converted to R-452A)   Control panel: "Touchpanel" All control and operating commands can be initiated on the "Touchpanel" control panel by simply touching the function symbols.   Adjustable feet To compensate for uneven floors and to ensure adequate ventilation of the machine, the test chamber is equipped with adjustable feet.   Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be placed inside the test chamber.   Feedthrough installed as standard R1: 125 mm nominal diameter L1: 50 mm nominal diameter   Test chamber volume: approx. 600 liters   External dimensions with hinges and door latch Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door latch Height 1995 mm, Width 1000 mm, Depth 1660 mm   Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm   Data for temperature tests:   Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K   Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 2500 W   Data for operation:   Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power 7.8 kW Fuse on customer side: 16 A, slow-blow   Bdsdpfxezga Hus Agkei Sound pressure level approx. Measured at a distance of 1 m from the front, 1 m height: 61 dB(A)   Refrigerant: R-452A   Weight: 620 kg   For your safety as a buyer, here is the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data and information are subject to change!)   We are happy to answer any further questions you may have by telephone.

Condition: used, Leybold Type: Trivac D 40 B The TRIVAC B series are oil-sealed vacuum pumps based on the rotary vane principle. The oil injected into the pumping chamber serves as a sealant, lubricant, and coolant. The pump housing is made up of individual parts without sealing elements. These are pinned together to ensure easy disassembly and reassembly. Ultimate pressure: 2 x 10⁻³ mbar Motor: 3-phase, 230/400 V, 50/60 Hz Pumping speed (50 Hz): 40 m³/h Pumping speed (60 Hz): 48 m³/h Environmentally friendly: Quiet Vibration-free operation, energy-saving Energy-saving: Low power consumption Low heat dissipation Modern vacuum technology: High pumping speed up to the ultimate pressure Low ultimate pressure, even with gas ballast High water vapor tolerance Continuous operation even at 1000 mbar Built-in oil pump, force-lubricated plain bearings Minimal air intake High leak tightness (suitable for 4He) Technical data: Product: TRIVAC D 40 B Suction side connection flange: DN 40 ISO-KF Pressure side connection flange: DN 40 ISO-KF Nominal pumping speed at 50 Hz: 46.0 m³/h Nominal pumping speed at 60 Hz: 55.0 m³/h Pumping speed at 50 Hz: 40.0 m³/h Pumping speed at 60 Hz: 48.0 m³/h Ultimate partial pressure without gas ballast: 1.0 x 10⁻⁴ mbar Ultimate total pressure without gas ballast: < 2.0 x 10⁻³ mbar Ultimate total pressure with gas ballast: < 5.0 x 10⁻³ mbar Water vapor tolerance at 50 Hz: 40.0 mbar Water vapor tolerance at 60 Hz: 40.0 mbar Water vapor capacity at 50 Hz: 1,184 g/h Water vapor capacity at 60 Hz: 1,184 g/h Operating fluid volume min.: 1.7 l max.: 2.6 l Sound level according to DIN 45 635 without gas ballast: 57 dB(A) with gas ballast: 59 dB(A) Mains connection: 3-phase, 200 / 200-240 / 380-400 V ±10%, 50 Hz 3-phase, 200-240 / 380-480 V ±10%, 60 Hz Motor power: 2.2 kW Bsdszgbvqjpfx Agksdi Motor speed at 50 Hz: 1,430 min⁻¹ Motor speed at 60 Hz: 1,735 min⁻¹ Motor protection class: IP 55 Permissible ambient temperature: +12 to +40°C Weight: 73.0 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Vötsch Climate test chamber / Temperature test chamber Vötsch VC³ 0034 Climate test chamber Temperature and climate test chamber, air-cooled For sale is a used climate test chamber from the manufacturer Vötsch Industrietechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 0034 Equipment type: Climate test chamber / Temperature test chamber Test chamber volume: approx. 335 liters Test chamber dimensions: approx. 580 x 765 x 750 mm (W x D x H) Housing dimensions: approx. 875 x 1860 x 1805 mm (W x D x H) Weight: approx. 490 kg Temperature range: -10 °C to +90 °C Temperature change rate, heating: approx. 1 K/min Temperature change rate, cooling: approx. 0.3 K/min Max. heat compensation: approx. 200 W Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature homogeneity in space: ± 0.5 to ± 1 K Climate range, temperature: +10 °C to +90 °C Dew point range: +4 °C to +89.5 °C Humidity range: 10 to 98 % RH Refrigerant: R404A Refrigerant quantity: 0.6 kg ND max.: 25 bar g HD max.: 25 bar g Power connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.3 kW Rated current: 10 A Water tank: 20 liters Protection class: IP54 Noise level: approx. 46 dB(A) Equipment Bjdpjzgb Awjfx Agksdi SIMPAC control Touch panel operation Interior made of stainless steel Temperature and humidity control Ethernet interface USB interface RS232 interface RS485 / RS422 interface Test specimen protection function Cable glands Documentation / Operating manual Accessories according to images Areas of application Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition according to images Scope of delivery 1x Vötsch VC³ 0034 Climate test chamber Documentation / Operating manual Accessories as shown in the images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Weiss Temperature test chamber / climate test chamber Weiss WT-270/70/10 temperature test chamber Temperature test chamber, water-cooled, -70 °C to +180 °C For sale is a used temperature test chamber from the manufacturer Weiss Umwelttechnik GmbH. The test chamber is suitable for temperature tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Weiss Umwelttechnik GmbH Type: WT-270/70/10 Device type: Temperature test chamber / climate test chamber Test chamber volume: approx. 270 liters Test chamber dimensions: approx. 580 x 750 x 615 mm (W x D x H) Housing dimensions: approx. 870 x 1775 x 1745 mm (W x D x H) Weight: approx. 835 kg Temperature range: -70 °C to +180 °C Temperature change rate heating: approx. 10 K/min Temperature change rate cooling: approx. 14.5 K/min Temperature deviation over time: ± 0.3 to ± 0.8 K Temperature deviation spatially: ± 0.5 to ± 2 K Bodjzgcqvepfx Agksdi Refrigerant: R404A / R23 Refrigerant quantity R404A: 6.5 kg Refrigerant quantity R23: 2.3 kg Maximum suction pressure: 19 bar g Maximum discharge pressure: 25 bar g Standby pressure: 17 bar g Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 14 kW Rated current: 26 A Equipment Touch panel operation Viewing window in the door Interior made of stainless steel Test chamber lighting Side openings Shelf / test chamber equipment as shown in the pictures Control cabinet Main switch panel Connector panel RS232 interface Documentation / operating manual Accessories as shown in the pictures Application areas Temperature testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of delivery 1x Weiss WT-270/70/10 temperature test chamber Documentation / operating manual Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Henkel   UVALOC 400 Loctite 97039 Curing Chamber The UVALOC 400 curing chamber (LOCTITE 97039) is a surface irradiation curing system developed for curing light-curing adhesives using UVA radiation and visible light. It is suitable for manual curing of individual parts during the manufacturing process as well as for laboratory use.   The device integrates the following: a control unit with an integrated mains switch and operating hour counter a lamp housing with the burner reflector igniter. With UV protection box.   Features:   Contains a 400 W metal halide lamp Bodjzg Expspfx Agksdi Optimized for light output in the UVA range Typical curing area 10 x 19 cm Expected UV lamp life up to 1000 hours The power supply can be disconnected from the lamp module and operated separately Adjustable lamp height for optimal irradiation With glass filter to prevent short-wave UVB/UVC emission   Technical data: Mains connection 230 V AC ± 4%, 50 Hz Power consumption approx. 460 W Mains fuse 2 x 5 A, slow-blow Glass tube fuse 5 x 20 mm Warm-up time for the UV lamp 3 minutes Lamp type 400 W high-pressure metal vapor lamp with double-ended base Lamp life approx. 1000 hours Intensity See section 5.1 Dimensions (width x height x depth): 220 mm 472 mm 300 mm Ambient and operating temperature + 10 °C ... + 30 °C Storage temperature - 10 °C ... + 60 °C Weight ~ 11.5 kg   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, VLM Type: V.745.672.120, Model CC 1000-FL HL Bsdpfxezg Tl Rs Agkedi Corrosion test chamber for salt spray tests Specifications: Test chamber volume: approx. 1000 L Test chamber dimensions (W x D x H1/H2): 1400 x 800 x 800/1020 mm Door opening dimensions (W x H): 1300 x 680 mm Housing external dimensions (W x D x H): 2162 x 995 x 2080 mm Operating temperature range: 5°C > ambient temperature to +80°C Heavy-duty design for a load capacity of up to 350 kg Process control: Beckhoff PLC, color touch screen display, 50 memory locations for test procedures, 50 memory locations for test segments, ramps: Humidity and temperature control across the entire working range, Ethernet connection Electrical connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar, tap connection 3/4" external thread for connecting an ion exchange cartridge Compressed air: 7-8 bar Wastewater: siphon / 30 mm ID hose nozzle Exhaust: pipe end AD 75 mm Operating modes: Salt spray Condensation water (CWC) Ventilation with ambient air Warm air Controlled humidity

Condition: used, H. KÖHLER GmbH Kesternich corrosion test equipment / SO₂ corrosion test system H. KÖHLER HK 300 S Corrosion test equipment according to DIN 50017 / DIN EN ISO 6988 For sale is a used corrosion test system from the manufacturer H. Köhler GmbH. The equipment is suitable for carrying out reproducible Kesternich or SO₂ corrosion tests for metals, coatings, paints and components in the laboratory, development and quality assurance. Technical data Manufacturer: H. Köhler GmbH Type: HK 300 S Equipment type: Kesternich corrosion test equipment / corrosion test cabinet Test standards: DIN 50017 / DIN EN ISO 6988 (DIN 50018) Test chamber volume: approx. 300 liters Temperature range: ambient temperature to approx. +55 °C Humidity range: saturation operation possible Test chamber heating: 1,000 W Connected load: approx. 1,100 W Power connection: 230 V / 50 Hz Compressed air consumption during ventilation: approx. 3 Nm³/h Compressed air connection: 4.5 - 7.0 bar Deionized water connection: 2.5 - 4.0 bar Spray pressure: 0.7 - 1.5 bar Dimensions (without brine tank): Height: approx. 1,750 mm Width: approx. 1,200 mm Bjdpfozg U Tisx Agkodi Depth: approx. 600 mm Weight: approx. 100 kg Control HK PC102 microprocessor control LCD display Programmable test programs Temperature control Test sequences according to company standards and DIN 50017 Equipment Stainless steel test chamber Large glass door with seal Temperature display Test chamber thermometer Manometer Ventilation system Gas dosing device Compressed air connection Deionized water connection Exhaust air connection Operating manual Maintenance documentation EC Declaration of Conformity Application areas Corrosion testing Kesternich test SO₂ corrosion test Coating test Paint test Material test Automotive industry Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of delivery H. Köhler HK 300 S corrosion test equipment Operating manual EC Declaration of Conformity Maintenance documentation Documentation Accessories as shown in the pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight transport possible. Subject to change, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Weiss   Type: WK3-340/70   Weiss Climate Testing Chamber, Air-Cooled   Control Panel »Touch Panel« All control and operating commands can be initiated by simply touching the function symbols on the »Touch Panel« control panel.   Adjustable Feet To compensate for uneven floors and ensure sufficient ventilation of the machine section, the testing chamber is equipped with adjustable feet.   Feedthroughs The testing chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the test chamber.   Feedthrough installed as standard R1: 125 mm L1: 85 mm   Volume: 335 liters   Test chamber dimensions:   Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm   Data for temperature tests:   Minimum temperature -72°C Maximum temperature +180°C   Temperature deviation, over time ± 0.1 to ± 0.5 K Temperature homogeneity, spatially ± 0.5 to ± 1.5 K   Temperature change rate, cooling 3 K/min Temperature change rate, heating 3 K/min   Data for climate tests:   Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% RH   Temperature deviation, over time ± 0.1 to ± 0.3 K Temperature homogeneity, spatially ± 0.5 to ± 1 K Bodsziiwujpfx Agkodi Humidity deviation, over time ± 1 to ± 3% RH   Data for operation:   Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A Rated power 4.9 kW Fuse, to be provided by the customer: 16 A slow-blow   Refrigerant: R-452A/R23   Weight Approx. 585 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data, specifications are subject to change!)   We will be happy to answer any further questions you may have over the phone.

Condition: used, Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic test chamber (climatic chamber with solar simulation using an MHG lamp). The unit is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Bdsdpeziizmofx Agkji Equipment & Special Features: Precise temperature and humidity control Integrated humidification system with water tank Cooling via water or air system (optional) Feedthroughs for measuring cables available Control via control panel or interfaces (RS232 etc.) Stable test chamber floor, load-bearing up to 60 kg (optional reinforced up to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Chamber weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Radiation source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Irradiated area: approx. 1,600 cm² Weathering: Spectrum 300–3,000 nm, standardized tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with radiation: –20 °C to +100 °C (±1 K) Temperature range without radiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without radiation) Noise level: approx. 58 dB(A) at 1 m distance Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Vötsch Climate testing chamber / Temperature testing chamber Vötsch VC³ 4018 Climate testing chamber Temperature and climate testing chamber, air-cooled For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 4018 Device type: Climate testing chamber / Temperature testing chamber Testing chamber volume: approx. 190 liters Testing chamber dimensions: approx. 580 x 450 x 750 mm (W x D x H) Housing dimensions: approx. 870 x 1550 x 1800 mm (W x D x H) Weight: approx. 470 kg Temperature range: -40 °C to +180 °C Temperature change rate (heating): approx. 4 K/min Temperature change rate (cooling): approx. 5 K/min Max. heat compensation: approx. 2300 W Temperature deviation (time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 1.5 K Climate range (temperature): +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Humidity deviation (time): ± 1 to ± 3 % RH Heat compensation (climate operation): approx. 400 W Refrigerant: R404A Refrigerant quantity: 2.50 kg ND max.: 22.5 bar g HD max.: 25 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.1 kW Rated current: 14 A Testing chamber lighting: Halogen, 2 x 24 V / 50 W Feedthroughs available Operation via touch panel / controller Equipment Touch panel operation Viewing window in the door Interior made of stainless steel Testing chamber lighting Side feedthroughs Shelves / Testing chamber equipment as shown in the pictures Documentation / Operating manual Accessories as shown in the pictures Application areas Bodpoztu Nqjfx Agksdi Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x Vötsch VC³ 4018 Climate testing chamber Documentation / Operating manual Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful check The table or any other items not explicitly mentioned in the photos are not included in the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), mileage: 3,44,529 km, power: 265 kW (360.30 HP), first registration: 09/2011, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,500 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, total length: 8,300 mm, total width: 2,550 mm, = Additional options and accessories = - PTO = Remarks = Wiedemann Reichhardt combi kolkenzuiger (type: 12.0/2.5 - 320) - Inhoud watertank: 2.500 Liter Bdodpfx Ageymqbqekei - Inhoud slibwatertank: 8.000 Liter - Achterwaarts kippende opbouw - Kolkenzuigerarm bovenzijde, links- en rechts verschuifbaar - Welvaartsweegsysteem (type: Delta 30) - Radiografische afstandsbediening - Vacuumpomp Wiedemann (type: KW 3000), 3.000 m³ per uur - Hogedrukwaterpomp Speck bij 400 bar - Uitschuifbare achterbumper - Opbergkist - Aluminium brandstoftank 330 Liter - Adblue tank 60 Liter = More information = General information Year of construction: 2011 Registration number: BZ-LR-51 Technical information Number of cylinders: 6 Engine capacity: 12.740 cc Rear axle 1: Lift axle Weights Empty weight: 15.730 kg Carrying capacity: 10.770 kg GVW: 26.500 kg Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), 750 litre vacuum cutter direct from Bankrupt meat-free factory. The machine was rebuilt and only used for a short time before the company went Bankrupt. Bdodpjx N Nlzefx Agkoi

Condition: used, CTS Type: C-70/600 CTS C-70/600 climate testing chamber air-cooled version with observation window, test specimen protection, and documentation For sale is a high-quality CTS climate testing chamber, type C-70/600, for precise temperature and climate testing in research, development, quality assurance, and industry. Technical data: Temperature range: -70 °C to +180 °C Bedpfx Ajy Hkazsgkodi Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Rated power: 8.7 kW Rated current: 14.8 A Protection class: IP 22 Refrigerant: R404A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment / Features: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Test specimen protection / temperature limiter Water connection / demineralized water supply Test chamber and condensate drain Pipe penetrations on the side of the test chamber RS232 interface according to documentation Digital outputs for test specimen control Test chamber dimensions according to documentation: approx. 850 x 850 x 830 mm External dimensions according to documentation: approx. 1900 x 1115 x 1850 mm Weight according to documentation: approx. 600 kg Scope of supply: CTS climate testing chamber C-70/600 including existing documentation / operating instructions Scope of supply as shown in the pictures For your safety as a buyer: The unit can be inspected by arrangement. Loading with a forklift can be arranged. For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Binder   Type: MK 115 E3.1   Refrigerant: R404A (1.20 kg)   Binder Climate Chamber for Rapid Temperature Changes   Model MK 115, Article Number 9020-0175 The basis for reliable material testing MK series | for dynamic temperature profiles Bdjdpfxey H Hvls Agkji   The smart alternative to complex individual solutions for cyclic temperature tests: The MK series masters all heat and cold tests between –40°C and 180°C. It is characterized by precision and performance. The APT.line™ preheating chamber technology ensures natural simulation – and thus reliable test results.   Performance Features Electronically controlled APT.line™ preheating chamber technology MCS controller with program memory Adjustable ramp functions 1 port, Ø 50 mm (left, measured approx. 49.3 mm) Temperature selector, Class 2 (DIN 12880) Heated viewing window with interior lighting Ethernet interface 4 rollers (mobile, 2 lockable) Stainless steel interior with insert   Technical Data:   External dimensions: approx. 980 x 1725 x 865 mm (W x H x D)   Internal dimensions: approx. 600 x 480 x 400 mm (W x H x D)   Internal volume: 115 liters Weight: approx. 260 kg   Temperature data: Temperature range: -40°C to +180°C Very rapid temperature changes (climate chamber operation)   Electrical data: Rated voltage: 400 V / 50 Hz Rated power: 3.5 kW Rated current: 11.0 A   Max. operating pressure: 29 bar   Condition: used optically and technically as shown in the pictures   Scope of supply: Binder MK 115 climate chamber incl. insert / interior equipment   For your safety as a buyer: Inspection possible by arrangement Loading with a forklift can be arranged   (Subject to changes and errors in technical data!)   We will be happy to answer any further questions by telephone or message.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 32026, compressed air connection: 9 bar, overall weight: 60 kg, input voltage: 230 V, warranty duration: 12 months, Dry Ice Blaster GR II New device 10 kg ice hopper capacity 3 mm pellets 5 meter blasting hose LED light on the gun 7 mm round nozzle 25 mm flat nozzle 5 meter air hose Bedpfoyh Hr Sox Agkedi Technical performance: 9 bar Max air flow: 4200 L/min Air pressure regulator: 1-9 bar Ice feed regulator: 0 - 70 kg ice per hour

Condition: used, Weiss   Type: WT-1000/70/5   Weiss temperature testing chamber, water-cooled With a temperature change rate of 5 K/min   Data for temperature tests: Temperature range: -70 °C to +180 °C Temporal temperature deviation in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature homogeneity: ± 0.5 to ± 2 K   Temperature change rate: Heating: 6.1 K/min Cooling: 6 K/min   Permissible test specimen weight: Total load on the test chamber floor: 150 kg Load per insert shelf: 50 kg   Dimensions: Test chamber dimensions: Height 950 mm, Width 1100 mm, Depth 950 mm External dimensions: Height 2000 mm, Width 1415 mm, Depth 2105 mm   Test chamber volume: 990 liters   Data for operation: Nominal voltage: 3/N/PE AC 400 V ± 10% 50 Hz Nominal current: 38 A Nominal power: 26 kW Refrigerant: R404 / R23 Weight: approx. 955 kg   Information for buyers: To ensure the safety of our customers, the following work will be carried out on the offered climate chambers in advance:   1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. Documented test run after successful inspection   Condition: used   Scope of supply: (See image)   (Changes and errors in the technical data are subject to change!) Bedpfx Agey D Nyuskodi   We will be happy to answer any further questions you may have by telephone.

Condition: used, functionality: fully functional, This offer is for a used ‘Ricoh Pro 8320’ black-and-white production system Items for sale: 1 x Ricoh Pro 8320 with the following specifications: incl. Vacuum Feed LCIT RT5120 incl. Booklet Finisher SR5120 incl. Trimmer Unit TR5050 Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 13,754,808 pages Condition: This offer is for a used machine, which may show signs of wear (minor scratches or yellowing). Bdodpfx Agozaqi Iskei The machine has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! Before dispatch or collection, a functional test will be recorded on video for you. For further information, you are of course welcome to contact us directly.

Condition: used, power: 27 kW (36.71 HP), input voltage: 400 V, input current: 44 A, temperature: 200 °C, inner dimension length: 1,100 mm, inner dimension width: 1,600 mm, inner dimension height: 1,500 mm, overall weight: 3,500 kg, number of chambers: 1, Equipment: CE marking, documentation/manual, Electrically heated chamber oven Vötsch VTLF 160/150/110 for solvent-containing components with monitored fresh air supply. The oven is in excellent condition. The documentation is very comprehensive and complete. Bodpfx Aey U Uzxjgkodi Usable dimensions: 1600 x 1100 x 1500 mm (width x depth x height) Rated temperature: 200 °C Maximum permissible solvent quantity according to EN 1539 at rated temperature: 38 g Total connected load: 30 kVA Rated power: 27 kW Usable volume: 2.78 m³ Steam space: 4.5 m³ Can be inspected while energized.

Condition: used, Liebisch Constamatic Type: S1000 M-TR Corrosion testing system / Salt spray test chamber Liebisch Constamatic S1000M-TR (4BVL) Professional corrosion testing system for salt spray, condensation, and cyclic climate tests For sale is a used corrosion testing system from the manufacturer Liebisch Labortechnik. The system was developed for corrosion tests under defined environmental conditions and is suitable for quality control, research, development, and material and coating tests. Due to the robust chest design and large test chamber volume, larger components can also be tested. Technical data Manufacturer: Liebisch Labortechnik Type: Constamatic S1000M-TR (4BVL) Device type: Corrosion testing system / Salt spray test chamber Design: Chest design Test chamber volume: 1000 liters Test chamber dimensions (W x D x H): 1435 x 780 x 600 mm External dimensions (W x D x H): 2600 x 1120 x 1255 mm Temperature range, test chamber: Ambient temperature to 50 °C Temperature range, humidifier: Ambient temperature to 70 °C Reservoir for salt solution: 100 liters Power connection: 230 V AC Frequency: 50–60 Hz Current consumption: 12 A Power consumption: approx. 2700 W Suitable for tests according to DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621-415 ASTM B368 MIL STD 202 F-101D VW PV 1210 as well as other corrosion and cyclic climate tests Equipment Automatic control Salt spray test Condensation test Combined corrosion and cyclic climate tests Temperature control Humidification system Test rack with sample holders Pressure gauge Large reservoir for test solution Gas spring dampers for comfortable lid opening Areas of application Automotive industry Coating and paint testing Material testing Quality assurance Research and development Laboratory and testing technology Weight: 450 kg Condition Bsdpfszcdyxjx Agkjdi Used Normal signs of wear and tear Interior with discoloration due to corrosion from previous testing operations Optical condition as shown in the pictures Scope of supply as shown in the pictures Scope of supply 1x Liebisch Constamatic S1000M-TR corrosion testing system Test rack and integrated holders Other accessories as shown in the pictures Inspection and testing on-site are possible by arrangement and are highly recommended. Loading can be organized by arrangement. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), machine/vehicle number: XLRAE55GF0L350661, mileage: 1,61,802 km, power: 163 kW (221.62 HP), first registration: 03/2009, fuel type: diesel, empty load weight: 11,290 kg, Year of construction: 2009, For sale is a used vacuum truck/vacuum vehicle, ideally suited for construction sites, tunnel construction, sewer cleaning, or industrial vacuuming applications. Vehicle details: Vehicle type: Vacuum truck Superstructure: Cylindrical tank with pump and suction system Application area: Tunnel construction, construction site, industry Condition: Used, fully functional Robust design for heavy-duty applications Bdjdpfx Aozcvvlegksi Suction and emptying system included

Condition: used, Weiss Type: SC 450 Weiss corrosion testing device / salt spray testing chamber for corrosion tests, salt spray tests, and condensation water tests with Liebisch / Weiss control system Data according to the nameplate: Manufacturer: Weiss Umwelttechnik GmbH Type: SC 450 Device No.: available Electrical data: Voltage: 1/N/PE AC 230 V ±10% / 50 Hz Rated power: 2 kW Rated current: 8.7 A Test chamber data according to manufacturer's documentation: Test chamber volume: approx. 480 liters Test chamber height with hood: approx. 1190 mm Test chamber height without hood: approx. 740 mm Width to spray nozzle: approx. 750 mm Depth: approx. 570 mm External dimensions according to manufacturer's documentation: Height with hood: approx. 1370 mm Height without hood: approx. 920 mm Width: approx. 1930 mm Depth: approx. 800 mm Technical data: Salt solution tank: approx. 180 liters Temperature range for salt spray test: 5 K above ambient temperature up to +50 °C Temperature range for condensation water test: 5 K above ambient temperature up to +45 °C Temperature stability over time: ±1 K Compressed air: min. 4 bar / max. 10 bar Weight empty: approx. 180 kg Control / Operation: Liebisch Labortechnik control panel S!MCON/32 control and regulation unit Color touch panel Digital setpoint and actual value display Operating and error display Bodpfx Ajzbatrogkedi Programmable test sequences Testing options: Salt spray test according to DIN EN ISO 9227 / DIN 50021 Condensation water test according to DIN EN ISO 6270-2 / DIN 50017 Corrosion test Material test Surface test Quality assurance Equipment: Corrosion-resistant polyethylene housing GFK test chamber Acrylic glass nozzle in the spray nozzle Heated compressed air humidifier Flow and dosing system for salt solution Salt solution storage tank Test specimen holder / support tubes Floor grate Measurement and connection fittings Exhaust connection Condensate drain Condition: Used equipment from industrial use. Optical condition according to the pictures. Inspection and testing on site are possible after arrangement and are expressly desired. Scope of delivery: (See picture) Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, pure engineering Type: pureGMC18 System for manual weighing processes Climate chamber for highly sensitive weighing processes with ultra-microbalances. The weighing chamber is specifically designed for the gravimetric determination of particulate emissions in exhaust gas analysis and meets the regulatory requirements of environmental authorities. All necessary climate control components are integrated. In combination with the particulate filter, a contamination-free and precisely conditioned weighing and storage area for the filters is ensured. Features: Precise temperature and humidity control Weather station (p, t, h) for buoyancy correction Dew point mirror (optional) Vibration-isolated granite for low-vibration mounting of an ultra-microbalance Ionization device against static charging Flow protection for shielding the weighing cell Touch panel for intuitive operation Ethernet interface for process data exchange Interior with power outlets, grounding bolt Advantages: Meets regulatory requirements for particle weighing according to: ECE-R83 (light duty), ECE-R49 (heavy duty), EPA1065 (U.S. Environmental Protection Agency) Tested, ready-to-connect design Designation: pureGMC18 Temperature: 22°C ± 1 K Bodpjzd Ukiofx Agkjdi Humidity: 45% RH ± 3% Dimensions W/D/H: 1,800/800/1,980 mm Cleanroom class 5 (ISO14644-1) Voltage supply: 400V, 15A 50/60 Hz Weight: 650 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Köhler Bdodpfozd Umksx Agkji Type: HK 500 Salt spray chambers: Versatile testing options, from salt spray tests to fully automatic alternating tests Simple operation thanks to a graphical menu Customer-specific designs for many applications Easy operation via a touchscreen Internal dimensions W x D x H (without hood): 1080 x 675 x 580 mm External dimensions W x D x H: 1940 x 900 x 1220 mm Test chamber volume: 500 liters Chamber temperature: Ambient temperature +5 – 60°C Humidification temperature: Ambient temperature +5 – 75°C Power connection: 230V, 1 phase, 50/60Hz, 2000W Compressed air: 4.5 – 8.0 bar / 3 Nm³/h Salt solution reservoir: 140 liters Material: Stainless steel (Completely overhauled and converted by the manufacturer to a Comfort control system) - Renewal of all electrical components - Renewal of all hose connections 400 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.