Used Velox 350 for sale (5,920)

Condition: excellent (used), Here we offer you a climate chamber. Water-cooled Test chamber volume: 350 liters Internal chamber dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Temperature working range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Climate working range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% RH Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 - ±0.3 K over time Humidity deviation: ±1 - ±2% RH over time up to 90% RH max. ±1 - 3% RH over time above 90% RH Electrical connection: 400V +6-10%, 3/N, 50Hz Connected load: 13 kW Rated current: 25.5 A Refrigerant: R404A / R23 Weight: 650 kg Type: CS-70/350 For your safety as a buyer, please note the following information: The following steps are performed in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a trial run which is monitored with calibrated equipment. Condition: used Scope of delivery: (see photo) (Specifications, technical data and details may be subject to change. Errors excepted.) Cjdpfx Abjygumkjcogn For any further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: C-40/350 Ex/l Climate Test Chamber, Water-Cooled ATEX Zone 1 The Ex/l designation indicates that this climate test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is designed for environments where explosive atmospheres may occur. Such equipment is specially constructed and tested to ensure safety in these conditions. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: approx. 3500 W at +20°C approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ ±3.0% r.h. over time The technical data refer to an ambient temperature of +25°C, nominal voltage of 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical Design: Cooling unit: water-cooled, low-noise, fully hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load capacity 150 kg/m² Rack: Stainless steel, support surface 620 x 600 mm Load per rack max. 35 kg Total load with maximum rack configuration 100 kg Control system: 32-bit controller LCD operating panel Digital display of setpoint and actual values Numeric input of setpoints Plain text fault messages RS 232 interface Ethernet interface Free switching channels for user-side test item control Dimensions: Test volume: 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Cedsygui Sepfx Abcsgn Operating Data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 7.15 kW Nominal current: 14.3 A Protection class: IP 54 Sound pressure level

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 11322 - 6759.470QC6, load capacity: 15 kg, arm reach: 1,700 mm, controller manufacturer: CLOOS, controller model: QIROX C, teach pendant manufacturer: CLOOS, input voltage: 400 V, input current: 44 A, type of input current: AC, • Year 2013 • Ready to weld Aluminium and Steel • Model QRC 350 QIROX • Control cabinet QIROX C – QRC 350 • Linear track of 15 m • Laser camera POWER CAM of SERVO MOTOR CANADA Csdpfx Aowcyffobcjgn • Touch sensor Quinto • Arc sensor • Wire Barrel • Wire drive unit CK 118 R K CDD • Welding torch MRW 500-35°-78/273 • CDD CLOOS DUO DRIVE • Welding machine QINEO PULSE 450 GLC 403 Quinto II with external cooling (Hot Countries) • Torch clean CMR 7 C DA with wire cutter

Condition: used, mileage: 1,82,990 km, power: 105 kW (142.76 HP), first registration: 06/2021, fuel type: diesel, overall weight: 5,000 kg, next inspection (TÜV): 10/2026, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 6,220 mm, total width: 2,310 mm, total height: 2,965 mm, loading space length: 3,470 mm, loading space width: 2,210 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Mercedes-Benz Sprinter 514 CDI Refrigerated Box Van Codpfx Abeyfkvljcjgn ----* Cooling unit: Carrier Xarios 350 * In-transit cooling * Stand-by cooling – external power connection (Electric operation - power supply) * Double rear doors * Tail lift with 1,000 kg lifting capacity * Side doors on the right ----* 1st owner * NEW: Inspection (TÜV) valid until 10/2026 ----* Air conditioning * Cruise control * Lane keeping assist * Active brake assist * Reversing camera * Heated driver's seat * Keyless go * Automatic headlights * Engine start/stop system * Electric windows * Electrically adjustable exterior mirrors * Central locking with remote control * ABS * ESP * Driver airbag * Driver's seat armrest * Driver’s comfort air-suspension seat * Euro 6 D engine * Automatic transmission with paddle shifters * Radio: tuner, USB-C, media/music playback via Bluetooth audio * Bluetooth hands-free telephone kit * Roof spoiler ----* Truck registration (N2) * Wheelbase: 3,665 mm (medium wheelbase) * Dimensions (cargo space/loading area) L x W x H: 3.47 x 2.21 x 1.90 m * Dimensions (vehicle) L x W x H (in mm): 6,220 x 2,310 x 2,965 mm * Permissible gross weight: 5,000 kg * Payload: 1,783 kg * 2 vehicle keys available * VAT deductible ----* We speak German / English / Greek ????? ????? * Financing available upon request * We assist with all registration matters (export plates/temporary plates) and customs formalities * We are happy to provide you with a purchase offer for your vehicle * Web: * E-mail: ----Price changes, prior sale, typographical errors, and mistakes excepted

Condition: used, mileage: 2,35,570 km, power: 105 kW (142.76 HP), first registration: 04/2021, fuel type: diesel, overall weight: 5,500 kg, next inspection (TÜV): 05/2026, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 6,320 mm, total width: 2,310 mm, total height: 2,965 mm, loading space length: 3,380 mm, loading space width: 2,210 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Mercedes-Benz Sprinter 514 CDI Refrigerated Box Truck ---- * Refrigeration unit: Carrier Xarios 350 * In-transit cooling * Standby cooling – power connection (electric operation – electric connection) * Rear double-wing doors * Tail lift with 1,000 kg lifting capacity * Right-side doors ---- * 1st hand (one previous owner) * NEW: TÜV inspection (valid until 05/2026) * NEW: Oil change service ---- * Air conditioning Cedpsyfkvfofx Abcogn * Cruise control * Lane keeping assist * Active brake assist * Rear view camera * Driver’s seat heating * Keyless Go * Automatic headlights * Engine start/stop function * Electric windows * Electrically adjustable exterior mirrors * Central locking with remote control * ABS * ESP * Driver airbag * Armrest on driver's seat * Driver comfort suspension seat * Euro 6 D engine * Automatic transmission with shift paddles * Radio: tuner, USB-C, media/music playback via Bluetooth audio * Bluetooth hands-free system * Roof spoiler ---- * Truck registration (N2) * Wheelbase: 3,665 mm (medium wheelbase) * Dimensions (cargo area) LxWxH: 3.38 x 2.21 x 1.90 m * Dimensions (vehicle) LxWxH (in mm): 6,320 x 2,310 x 2,965 mm * Permissible total weight: 5,500 kg * Payload: 2,286 kg * 2 vehicle keys available * VAT deductible ---- * We speak German / English / Greek ????? ???? * Financing available upon request * We will assist you with all registration (customs license plate/temporary plate) and customs formalities * We will be happy to make you a purchase offer for your vehicle * Web: * E-mail: ---- Price changes, prior sale, typographical errors and mistakes excepted

Condition: used, mileage: 60,414 km, power: 96 kW (130.52 HP), first registration: 11/2019, fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,981 mm, total width: 2,059 mm, total height: 2,547 mm, loading space length: 3,350 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1240. KT37498 ----EQUIPMENT * Fixed trailer coupling, 13-pin including trailer stability control (TSC - Trailer Sway Control) * Exterior mirrors, electrically adjustable, heated and folding – with integrated indicators * Rear double-wing doors with 180° opening angle (with window) – with heated rear windows * Omission: Vinyl floor covering “Easy Clean” * Window: sliding door window, right * Hardwood load compartment floor (Delignit) with anti-slip coating – with 3 integrated airline tracks transverse for L2/L3 wheelbase – with 4 integrated airline tracks transverse for L4 wheelbase * Rear window protective grilles * LED lighting in the cargo area * Paint: Metallic * MyFord Dock – above the dashboard, for attaching e.g. a smartphone or navigation device * Cargo securing package – airline tracks on the side walls right and left at a height of 550 mm/650 mm (rear/front wheel drive) and 1575 mm/1675 mm (rear/front wheel drive) – 4 lashing points (KERL 500) – hardwood load compartment floor (Delignit) * Visibility Package II – exterior mirrors electrically adjustable and heated – heated windscreen – washer fluid sensor – exterior mirrors electrically folding – adjustable instrument illumination – fog lights – wipers with rain sensor – headlight assistant with day/night sensor * Partition wall to cargo area with window incl. protective grille * Heat-insulating glazing, medium tinting of the side window(s) in the 2nd row * Transmission: 6-speed manual * Anti-lock braking system with electronic brakeforce distribution (EBD) * Driver’s airbag * Exterior mirrors, electrically adjustable and heated – with integrated indicators * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECOMode * Medium roof * Headliner in driver’s cab – up to the partition wall to cargo area * Tachometer * Electronic safety and stability program (ESP) with traction control (TCS) – hill start assist – crosswind assist – emergency brake assist – roll stability control * Front windows, electric – with quick-down/up function for driver’s side * Ford Easy Fuel – comfort fuel filler and misfueling prevention * Generator, high-performance version * Cruise control incl. leather steering wheel – steering wheel with audio remote control (operation of audio system and on-board computer) * Lockable glove box with lid * Interior lighting with delay function Cjdpfx Aexbvu Debcogn * Front air conditioning incl. dust and pollen filter * Cargo area lighting * Load compartment floor: Vinyl floor covering “Easy Clean” incl. wheel arch covers * Leather steering wheel * Steering column, adjustable for height and reach * MyKey key system – individually programmable second key * Fog lights * Park Pilot System front and rear * Particulate filter: diesel particulate filter * Radio: Audio system 12 – radio (FM/AM) – four speakers, antenna – audio remote control on steering wheel – Bluetooth, USB port and hands-free system – MyFord Dock * Headlights with static cornering light * Headlight dip beam with switch-off delay * Automatic sliding door entry lighting when door is opened * Sliding door: sliding door, right * Rear mud flaps * Side protection strips * Sidewall trim high up to the roof – incl. wheel arch covers * Power steering * Seat belts – belt tensioners and belt force limiters in front – warning system for unfastened driver’s seat belt * Seat package

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: - Galvanized sheet steel construction - Space-saving due to compact design - Delivered ready for operation - ATEX - Explosion pressure resistance FSA tested - Low energy consumption with high performance thanks to clean air side high-performance fan with special impeller Cgjdpfx Asx H Dahobcjn - IE4 efficiency class energy-saving motor - 4 large-volume collection containers, with liner bags - High safety and long service life due to certified filter media with test certificate - Compressed air pulse cleaning (“jet” cleaning) with time-controlled system for filter surface regeneration - PLC control with display, for 4 EPN 24V DC valves, 4 machine start contacts, and 1 start for external automatic switch-on (additional valve controls available at extra cost) - Connection cable, 5 m length, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to water supply required) - The ABC powder extinguishing agent is not suitable for metal fires or cooking fats and oils - Non-return flap, type-tested - Built in accordance with DIN EN 16770 - Residual dust content in exhaust air below 0.1 mg/m³ - Passed GS-HM-03 "H3" test - IE5 efficiency power pack - Start valve control: Z 16 - Motor power: 11 kW - Nominal volume flow (Vnenn): 6927 m³/h at 20 m/s - Max. volume flow (Vmax): 8000 m³/h - Negative pressure at Vnenn: approx. 3100 Pa - Negative pressure at Vmax: approx. 2300 Pa - Collection volume: 495 l - Sound pressure level: < 73 dB(A) - Extraction port diameter: 350 mm Dimensions: 3930 x 1030 x 2560 mm Weight: approx. 1080 kg Availability: short-term Location: 63934 Röllbach

Condition: good (used), Code: 0289 Codpfsyf A U Tox Abcsgn Brand: PEGIC - ITALY Model: GP 350 RT - CE Standard Professional mitre saw for precise cutting of frames, wooden profiles, beads, window frames, wood, aluminium, plastic, Pvc and various materials - CE Standard Technical data Blade diameter mm 350 F 30 Three-phase motor Kw 2,2 Rpm 3000 Cutting capacity at 90° mm 160 x 110 Cutting capacity at 45° mm 115 x 115 Overall dimensions mm 850 x 600 x 500 h Weight kg 52

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Codpsw Sy T Hefx Abcogn Storage location: Nattheim

Condition: excellent (used), Catalogue number 7804 TECHNICAL DATA - Track width: 350mm - Shaft width: 330mm Cgedpfx Abjxvb S Rocen - Mounted blade: 300mm - Max blade diameter: 400mm - Blade bore diameter: 70mm - Max cutting height with 400mm blade: 150mm - Table dimensions: 2240x770mm – From above: - kickback/retractors - slip roller - retractors - smooth slip roller - shaft with saw blades - 2 slip and pressure shafts – From below: - roller in front of the table - guide - pawls - track - central track lubrication - electric raising of saw blade shaft 0.75kW - electric raising of machine body 0.75kW - variable feed speed adjustment - Extraction nozzle diameter: 320mm - Main motor: 45kW - Overall dimensions (L/W/H): 2280x1820x2040mm - Weight: 2850kg ADVANTAGES – Czech production – Used multi saw machine – Technical documentation (DTR) – Very good condition Net price: 62,900 PLN Net price: 14,970 EUR depending on EUR rate 4.2 (Prices may change with significant fluctuations)

Condition: good (used), mileage: 1,97,932 km, power: 96 kW (130.52 HP), first registration: 08/2018, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 6,900 mm, total width: 2,050 mm, total height: 3,000 mm, loading space length: 4,090 mm, loading space width: 1,770 mm, loading space height: 2,030 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, trailer coupling, = Additional Options and Equipment = - Includes roller and step - Partition wall = Remarks = Configuration: 4x2, Payload: 1,015 kg, Unladen weight: 2,485 kg, Gross vehicle weight: 3,500 kg, Unbraked trailer load: 750 kg, Braked central axle trailer load: 2,800 kg, Trailer hitch, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking sensors: front and rear, Electric windows, Electric mirrors, Partition wall, Radio/cassette, Color: white, Heated mirrors, Rear view camera, Type of lighting: halogen lamp, Bluetooth, Flashing lights, Engine power: 96 kW (129 HP), Fuel: diesel, Emission standard: Euro 6, Drive system: timing belt, Transmission type: manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Sidewall paneling, Rear step, Roof rack: incl. roller and step, Side doors: 1, Rear closure: double doors, Central locking, Seats: 3, Seating arrangement: 1+2, Upholstery: fabric, Seat adjustment: manual, Tire type: summer tires = Further Information = General Information Number of doors: 1 Cgsdjygrazepfx Abcon License plate: VKS-92-J Axle configuration Tire size: 235/65R16 Brakes: disc brakes Axle 1: Left tire tread: 5 mm; Right tire tread: 5 mm; Suspension: coil spring Axle 2: Left tire tread: 6 mm; Right tire tread: 6 mm; Suspension: air suspension Weights Unladen weight: 2,485 kg Payload: 1,015 kg Gross vehicle weight: 3,500 kg Functional Loading platform height: 70 cm Condition Technical condition: good Visual condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €178 per month (panel van, 72 months); Ask for more information and conditions

Condition: excellent (used), Vecoplan 350/140 Chipper / Shredder Catalogue No. 7742 TECHNICAL DATA - Infeed width: 350 mm - Infeed height: 140 mm - Shaft width: 345 mm - Shaft diameter: 290 mm - Number of knives: 2 pcs - Screen size: 55x55 mm - Toothed feed shaft from above and below - Shaft motors: 2×1.5 kW - Electric auto-reverse (adjustable) - With vibrating chute Cgsdpfx Asxcx S Iobcjn - Vibrating chute length/width: 3750×355 mm - Full vibrating chute dimensions: 3750x620x1210 mm - Discharge with conveyor belt: 2970x340 mm - Conveyor belt dimensions: 3000x630x750 mm - Main motor: 22 kW - Dimensions (L/W/H): 3000x1100x1500 mm - Weight: approx. 2500 kg ADVANTAGES – German-made – with vibrating chute – With discharge conveyor – Auto-reverse – Used chipper, in very good condition Net price: 47,900 PLN Net price: 11,400 EUR depending on the exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7652 Technical specifications: - Track width: 350mm - Cutting width: 370mm - Blade diameter: 400 to 450mm - Cutting height for 350/400mm blade: 160mm - Spindle diameter: 70mm - Table dimensions: 1850x800mm - Height from base to table: 750mm Top section: - Pawls/deflectors - 2 smooth, metal sliding shafts - Shaft with saw blades - 3 smooth, metal sliding shafts Bottom section: - Guide bar - Pawls/deflectors - Track - Toothed, extracting drive shaft - Electric body height adjustment - Central lubrication - Stepless speed adjustment via inverter - Feed motor: 2.2kW - Main motor: 55kW - Extraction nozzle diameter: 200mm - Overall dimensions (L/W/H): 2560x1700x1900mm - Weight: 2700kg Cgsdeyaq H Hopfx Abcon ADVANTAGES – Made in Germany – Technical documentation (DTR) – Used multi-blade saw – Very good condition Net price: 39,900 PLN Net price: 9,500 EUR depending on an exchange rate of 4.2 EUR (Prices may vary with major currency fluctuations)

Condition: used, Year of construction: 2008, Ma.-No. 204412, Control Mazatrol Matrix Nexus, travel X/Y/Z 260 x 150 x 1,605 mm, max. spindle speed 3,300 rpm, max. spindle bore 102 mm, max. turning diameter 420 mm, max. turning length 1,500 mm, 12-position tool turret with driven tool stations, tool holder VDI 50, max. speed 4,000 rpm, operating hours approx. 81,940, three-jaw chuck, hydraulic steady rest, make SMW Autoblok, tailstock, tool measuring system, chip conveyor, make Mayfran, type QTN300M, tool and accessory package. PCB defective! Cgjdpfx Abeyffxhecon +++ Note: Machine is part of an online auction! +++

Condition: used, mileage: 48,480 km, power: 125 kW (169.95 HP), first registration: 01/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Subject to errors and prior sale! Internal number: 1179. KM27296 ---- EQUIPMENT * Exterior mirrors, electrically adjustable, heated and foldable - with integrated indicators * Double-wing rear door with 256° opening angle, (without window) without rear windows, with locking magnets * LED lights in the cargo area * MyFord Dock - above the dashboard, for attaching e.g. smartphone or navigation device * Radio: Audio system 13 additionally with DAB/DAB+ - Radio (FM/AM) - Four speakers, antenna - Audio remote control on the steering wheel - Bluetooth, USB connection and hands-free system - MyFord Dock - additionally with digital radio reception DAB/DAB+ (Digital Audio Broadcasting) * Gearbox: 6-speed gearshift * Anti-lock braking system with electronic brake force distribution (EBD) * Axle load increase - front to 1850 kg * Driver's side airbag * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECOMode * Roof, high * Headlining in driver's cab - up to the partition wall to the cargo area * Tachometer * Electronic safety and stability program (ESP) with traction control (TCS) - Hill start assist - Crosswind assist - Safety brake assist - Rollover protection * Electric front windows - with quick down/up switch for driver's side * Ford Easy Fuel - comfort tank cap and misfueling protection * Cruise control including leather steering wheel - steering wheel with audio remote control (operation of the audio system and the on-board computer) * Lockable glove compartment with lid Cgjdpfjivby Rsx Abcsn * Interior lighting with delay circuit * Air conditioning in front including dust and pollen filter * Paintwork: plain paintwork * Cargo area lighting * Cargo area floor: "Easy Clean" vinyl floor covering including wheel house covering * Leather steering wheel * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key * Fog lights * Parking pilot system front and rear * Particle filter: diesel particle filter * Headlights with static cornering light * Headlight dipped beam with switch-off delay * Sliding door entry light automatically when door is opened * Sliding door: sliding door, right * Mud flaps at the rear * Side protection strips * Side wall paneling up to the roof - including wheel house paneling * Power steering * Seat belts - Seat belt tensioners and belt force limiters at the front - Warning system for driver's seat belt not being fastened * Seats: Seat package 13 - Driver's seat, 4-way adjustable (forward/backward, backrest, seat cushion inclination, height) - Double passenger seat with storage compartment under individually foldable seat cushions - Headrests, height adjustable - Tray integrated in the double passenger seat (foldable) - Armrest inside for driver - Lumbar support, manual (driver's seat) - Seat cover: fabric * Start-stop system * Daytime running lights * Partition to the cargo area without window * Rear bumper with integrated step * Lashing eyes * Immobilizer * Heat-insulating glazing, slightly tinted * Central locking with remote control * Overhead storage compartment at the front ... and much more ----The vehicle is unprepared! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as part payment. Financing / leasing also possible without a down payment! Do you have any questions? We are happy to advise you!

Condition: used, mileage: 19,986 km, power: 96 kW (130.52 HP), first registration: 02/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, total length: 5,767 mm, total width: 2,198 mm, total height: 2,357 mm, loading space length: 2,385 mm, Year of construction: 2023, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1181. NR58403 ----EQUIPMENT - Airbag (passenger side) - Tow bar - Exterior mirrors, long arm, integrated indicators - Heated windshield - Seats: Seat Package 15 - Seats: Seat Package 29 - Central locking system - 6-speed transmission - ABS with electronic EBD - Axle load increase, front to 1850 kg - Driver's airbag - Exterior mirrors, electrically adjustable and heated - Exterior mirrors, short arm, integrated indicators - Battery: Extended battery life - On-board computer - Roof, flat - Roof, overhead storage compartment front - Headliner in driver's cab - Roof marker lights - Double cab - Tachometer - ESP with TSC - Windows, 2nd row: fixed side windows - Electric front windows - Ford Easy Fuel - Generator - Halogen headlights with daytime running lights Cedpfxsx Nlc Ae Abcegn - Glove box with lockable lid - Interior lighting with delay switch-off - Air conditioning (front) - Fuel tank 70 l - Radiator grille: 3 bars - Paintwork: Solid paint - Steering wheel: Leatherette trim steering wheel - MyKey key system - Fog lights - Emergency call assistant - Package: Technology Package 8 (4x4) - Particulate filter: Diesel particulate filter - Platform body: Standard platform (wide) - Power steering - Seat belts - Seats: Rear seat package 1 - Recirculation switch - Immobilizer - Heat-insulating glazing, lightly tinted - Central locking with remote control ...and much more. ----Vehicle is unprepared/as-is! Nationwide delivery available at extra cost. Errors and prior sale excepted. We are happy to consider your trade-in. Financing / leasing available with zero down payment! Any questions? We are happy to advise you!

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, ### Weinig Dimter OptiCut 350 – Optimizing cross-cut saw The Weinig Dimter OptiCut 350 is a high-performance Optimizing cross-cut saw widely used in the woodworking industry for precise cut-to-size operations with simultaneous material optimization. This machine ensures high-speed, accurate cutting, maximizing raw material efficiency while minimizing waste. Year of manufacture: 2005 Technical condition: Very good --- Technical Specifications: 1. Input material length: - Maximum length: 6,200 mm - Minimum length: 500 mm 2. Material width: - Maximum width: 300 mm - Minimum width: 40 mm 3. Material thickness: - Maximum thickness: 100 mm - Minimum thickness: 15 mm Cgjdjv Dm U Repfx Abcsn 4. Cutting speed: - Maximum cutting speed: 250-350 cuts per minute - Feed speed: up to 200 m/min 5. Cutting tool: - Saw blade rotational speed: approx. 3,000 RPM 6. Control system: - CNC control with an advanced PLC system for precise cutting process management. - Optimization data input to maximize material utilization and minimize waste. - Touchscreen interface for easy machine operation and parameter input. 7. Optimization system: - Equipped with a defect recognition system (manual or automatic defect marking) to eliminate defective sections during cutting. - Length optimization function based on production requirements (e.g., minimizing waste, maximizing output of specific lengths). 8. Material feeding system: - Automatic feeding system for seamless material input. - Integrated conveyors and transport systems for efficient material flow through the machine. 9. Waste management: - Automated waste removal and sorting system to separate defective wood fragments. - Number of ejectors: 9 unit 10. Cutting accuracy: - High precision cutting with an accuracy of ± 0.5 mm, depending on wood parameters and machine settings. 11. Power supply: - Standard power supply: 400 V, 50 Hz --- ### Additional Features: - Automatic defect marking: The operator can mark defects on the wood (e.g., knots, cracks), and the machine automatically optimizes the cutting process to avoid these sections. - Safety features: Equipped with modern safety systems, including lock sensors and protective covers. --- Applications: The Weinig Dimter OptiCut 350 is ideal for woodworking industries, especially in facilities producing structural wooden components, furniture parts, and solid wood processing plants. Thanks to its optimization capabilities, this machine significantly increases productivity and efficiency while reducing material waste.

Condition: used, Year of construction: 2017, Ser.-No. 138524-100, Control unit: Type Unilog B8, Clamping force: 1,100 kN, Tie bar clearance: 470 x 420 mm, Mould installation height: 200 - 450 mm, Opening stroke: 380 mm, Maximum platen distance: 830 mm, Ejector stroke (hydraulic/electric): 140/125 mm, Ejector force: 25 kN, Dry cycle time: 1.5 s per 294 mm, Maximum mould weight: 1,000 kg, Minimum mould dimension: 296 x 296 mm. Injection unit: Type 350, Screw diameter: 25 mm, Screw stroke: 175 mm, Screw L/D ratio: 22, 1 hydraulic core pull, Calculated shot volume: 85.9 - 220 cm³, Specific injection pressure: 1,595 - 3,000 bar, Maximum screw speed: 350 rpm, Screw torque: 340 - 500 Nm, Nozzle stroke/nozzle force: 250 mm/40 kN. Dosing unit: Manufacturer Movacolor. Injection/dosing unit: Manufacturer Wittmann, Type Feedmax S3-NET, Year 2017. Sprue picker/robot: Manufacturer Wittmann, Type WP80, Year 2018, Travel axes X/Y/Z: 100 x 550 mm x 90°, Compressed air hose reel: Manufacturer Metabo, Type SA250, L 25 m. Machine weight: 4,800 kg, Operating hours: 42,853. This item is part of an online auction Cgodpfxsyc Sqxe Abcen Sale is subject to the approval of the client.

Condition: excellent (used), SCM 350 Multi-Purpose Machine – Panel Saw, Thicknesser Thicknesser: Width: 35 cm, Max height: approx. 220 mm, 3 knives, Cgsdpfx Absyhdcdjcsn 1 feed speed, Jointer: Width: 35 cm, Table length: 180 cm, 3 knives, Tilting fence, Spindle moulder: Shaft diameter: 30 mm, Spindle adjustable up-down and tilting, 4 speeds, Side sliding carriage, Adjustable fence, Saw: Adjustable up-down and 0-45°, Side sliding carriage, Rule on side carriage, Scoring unit, Max blade diameter 300 mm, Cutting height with 300 mm blade – 90 mm, Horizontal borer: Table adjustable up-down, front-back and left-right, The machine has 3 motors, each 3 kW, 380V power supply, Used machine in very good condition, ready to work, Solid multi-purpose machine.

Condition: used, axle configuration: 3 axles, first registration: 06/2011, loading space length: 13,670 mm, loading space width: 2,470 mm, loading space height: 3,000 mm, Year of construction: 2011, Equipment: ABS, Fahrzeugausstattung* ABS Cgjdpfx Aoyg Atfebcsn * Scheibenbremsen * Werkzeugkasten * Achsentlüftung * Hubachse

Condition: used, axle configuration: 3 axles, first registration: 11/2012, loading space length: 13,660 mm, loading space width: 2,470 mm, loading space height: 3,000 mm, Year of construction: 2012, Equipment: ABS, Fahrzeugausstattung* ABS * Scheibenbremsen * Werkzeugkasten * Achsentlüftung * Hubachse Cedpfsyg Atlox Abcogn

Condition: new, power: 75 kW (101.97 HP), Year of construction: 2025, A mobile jaw crusher is a type of crushing machine that is equipped with a jaw crusher and is mobile in nature. This crusher is designed to be moved around and taken to various locations, especially those where processing materials are needed on-site. Mobile jaw crushers are widely used in industries such as mining, construction, and recycling for processing a variety of materials. Here are the key features and components of a typical mobile jaw crusher: 1. Jaw Crusher: - The primary crushing unit of the mobile jaw crusher is the jaw crusher itself. It consists of a fixed jaw and a movable jaw, with the material being crushed between them. 2. Mobile Chassis: - The crusher is mounted on a mobile chassis, which may have tracks for mobility or be wheeled for easy transport. The mobility of the chassis allows the crusher to be easily moved between different work sites. 3. Feeder: - A vibrating feeder is typically included to feed the material into the jaw crusher. It ensures a consistent and controlled feed of the material to the crushing chamber. 4. Engine or Power Source: - Mobile jaw crushers are powered by diesel engines or electric motors. The choice of power source depends on factors such as the availability of electricity and the need for mobility. 5. Control Panel: - A control panel is provided for operators to manage and monitor the crusher's operation. It may include controls for starting and stopping the crusher, adjusting the discharge setting, and monitoring various parameters. 6. Hydraulic System: - Mobile jaw crushers often feature a hydraulic system to adjust the crusher's settings. This includes the adjustment of the jaw crusher's CSS (Closed Side Setting), which influences the product size. 7. Conveyor Systems: - Conveyors are used to transport crushed material from the jaw crusher to the next stages of the processing plant or for stockpiling. Some mobile jaw crushers have integrated conveyor systems. 8. Magnetic Separator (Optional): - Some mobile jaw crushers come equipped with a magnetic separator to remove metal contaminants from the crushed material, preventing damage to downstream equipment. 9. Dust Suppression System (Optional): - To control dust generated during the crushing process, some mobile jaw crushers may be equipped with dust suppression systems. 10. Remote Control (Optional): Cgodpfx Abeq I N Atecen - Remote control capabilities allow operators to control the crusher from a distance, enhancing safety and convenience. 11. Application: - Mobile jaw crushers are used for primary crushing of various materials, including hard rock, construction and demolition waste, concrete, asphalt, and natural aggregates. 12. Versatility: - Mobile jaw crushers are versatile and can be used in various applications. They are suitable for both recycling and quarrying operations, offering flexibility in processing different types of materials. Mobile jaw crushers are beneficial for operations that require frequent relocation or for processing materials in remote locations. They provide a cost-effective solution for on-site crushing and are widely used in the construction and mining industries. Operators should follow safety guidelines and manufacturer recommendations for proper operation and maintenance.

Condition: excellent (used), Year of construction: 2012, WALTER WD 250/350 30 and 37 kW shaft multisaw – Polish production – year of manufacture 2012 Cgedpfemv Elpex Abcen – DTR and CE TECHNICAL PARAMETERS: cutting height 170 mm cutting width 350 mm spindle diameter 2 x 70 mm diameter of circular saw blades 300 mm spindle motor 30 kW and 37 kW feed motor 1.5 kW seven lower pulling rollers two upper toothed pulling shafts length of the feeding table 3000 mm spigot diameter belt collecting waste from under the machine 2 x 200 mm dimensions (length / width / height) 320 / 200 / 200 cm weight 2000 kg

Condition: used, mileage: 2,25,000 km, power: 125 kW (169.95 HP), first registration: 02/2017, fuel type: diesel, gearing type: mechanical, Equipment: air conditioning, all wheel drive, central locking, parking heater, Parking aid, viewing by telephone appointment Cedpfx Ajyg T R Ujbcegn

Condition: ready for operation (used), Year of construction: 2022, clamping force: 3,430 kN, screw diameter: 60 mm, total height: 2,397 mm, overall weight: 21,000 kg, product length (max.): 8,073 mm, This Toyo Si-350-6S JH750E-PACK was manufactured in 2022. It features a clamping force of 3430 kN, screw diameter of 60 mm, and an injection speed of 300 mm/s. With a total installed power of 85.6 kW and dimensions of 8073 × 1930 × 2397 mm, it represents a robust choice for precision molding. Contact us for more information about this machine. • Installed heating power: 27.5 kW • Total installed power: 85.6 kW • Control system: SYSTEM 800 Cjdpfx Aboydnbpecjgn • Interfaces: Euromap 67, Euromap 73Clamping unit: • Distance between tie bars: 810 × 810 mm • Platen dimensions: 1050 × 1050 mm • Opening stroke: 700 mm • Mold height (min / max): 300 / 770 mm • Ejector stroke: 150 mm • Ejector force: 60.0 kNInjection unit: • Injection speed: 300 mm/s • Injection pressure: 220 MPa • Holding pressure: 200 MPa • Theoretical injection volume: 763 cm³ • Injection rate: 848 cm³/s • PS injection capacity: 210 kg/h • Screw speed: 0–350 rpm • Injection stroke: 270 mm • Nozzle contact force: 39.0 kN