Used Veneer Clipper for sale (567)

Condition: as good as new (ex-display), Year of construction: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Noise level: 70 Db Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Prjdpfju Egp Iex Airjc Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg

Condition: used, machine/vehicle number: 008587, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Prodpfx Aijy In Dgjrec Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Year of construction: 2007, condition: excellent (used), Complex of portal center with two work areas and nesting with 1 work table: - two working spindles with a magazine for 18 sockets; L and R - industrial edging aggregates shop for 12 edges - EVA, PUR - station; - additional polyurethane station. The complex is designed for complete processing of details from chipboard and veneered MDF, etc. - cutting of details with nesting technology and complete processing of a portal center. The price does not include: - transport - dismantling - installation. Pedsizi Ttopfx Airjrc Fully serviced by German IMA Schelling team in 2022. The edging unit is hardly used.

Condition: ready for operation (used), Year of construction: 2006, A Reichenbacher CNC 5-axis twin-head machining center for the door manufacturing industry is available. Spindle power: 15kW, Speed: 24000rpm, Tool interface: HSK-F63, Tool positions: 60, Milling spindle spacing: 1040mm, Spindle housing dimension: 150mm, Travel X/Y/Z: 5100mm/2100mm/2650mm, Tool change stroke: 550mm, Max. travel speed X/Y/Z: 60m/min/90m/min/20m/min, Clamping beam speed: 40m/min. Vacuum support rails: 2, Vacuum cups: 2×30, Stop stroke: 150mm, Stop pin diameter: 30mm, Through-feed stop 1/2: 300mm/700mm, Max. veneer overhang: 5mm, Max. veneer thickness: 5.5mm. Workpiece length range: 800mm-3200mm, Workpiece width range: 600mm-1400mm, Workpiece thickness range: 38mm-72mm, Max. workpiece weight: 200kg. Chip conveyor belt width: 700mm, Infeed roller conveyor dimensions X/Y: 6000mm/1600mm, Outfeed roller conveyor dimensions X/Y: 6350mm/1600mm. Overall system dimensions X/Y/Z: approx. 18300mm/9750mm/3500mm, Machine dimensions X/Y/Z: approx. 4200mm/1600mm/3000mm, Machine weight: approx. 10500kg, Control system: Siemens Sinumerik 840D power-line. Including fully automatic infeed and unloading, 2×gantry cranes, safety equipment, various tools and a self-lowering roller table. This system was modernized in 2016. Documentation vorhanden. An on-site inspection is possible. Prodpfx Aiozqu Hwsrsc

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Note: Operator terminal and angle scale on the right side! Cutting length: 3200 mm Max. saw blade overhang: 100 mm Feed rate, continuously variable: 5-100 m/min; return speed: 130 m/min Prjdj Adv Ruepfx Airjc Saw carriage guided on round shafts Drive via gear and rack and pinion system Automatic cutting length detection via laser sensor on the saw carriage Quick-change system for main and scoring saw blade (ProLock) Cutting direction against the stop Motor: 13.5 kW, total connected load: 18 kW, rated current: 38 A Electronic cutting height adjustment (continuously variable) for the sawing unit Raising and lowering of the sawing unit by means of a positioning drive Dimensional measurement via non-contact magnetic measuring system Including nesting program Scoring saw adjustment, horizontal and axial, from the control panel via electric servo motors Scoring saw unit with pneumatic lowering, scoring saw motor 2.2 kW Manual pressure regulators for package clamps and pressure bar for sensitive materials Tilting table on the left: 2300 x 600 mm with air cushion Solid stop rail with 2000 mm 2 side tables, 2300 mm with air cushion Material pusher, cutting length 3200 mm Feed rate: 25 m/min; return speed: 80 m/min Rear support table with 9 double roller tracks Package clamps, 6 pieces, 2-finger design, opening height 80 mm 3 veneer stops for cutting panels with protruding veneers Device for automatic positioning of the trimming position by the material pusher Lateral pressing device for workpieces from 20 to 1200 mm Modular control system with 24" TFT flat screen PC with Windows 7 Pro operating system With thermal label printer Availability: approx. January 2027 Location: North Rhine-Westphalia

Condition: good (used), Code: 0510 Brand: BIESSE Model: POLYMAC SINGLE 89 - N - CE Standard Edgebander for straight, shaped, and round panels, for Pvc, Abs, veneer, and wood edges, for woodworking shops, custom furniture, furniture, kitchens, shelves, and various applications - CE Standard Features: Motorized feeder with adjustable speed Pneumatic trimming unit for trimming edged panels Digital electronic counter for setting the desired cutting length Work surface tilting from 0 to 45° Adjustable edge feed speed Technical Data: Edge height 10-60 mm Edge thickness 0,4-3 mm Min radius 20 mm Min panel length 300 mm Feed speed 2-18 mt/min Total power 4 Kw Compressed air 6 bar Overall dimensions mm 1700 x 950 x 1300 h Weight kg 350 Prodpfx Ae Agcf Roirsc

Condition: like new (used), functionality: fully functional, power: 7 kW (9.52 HP), saw blade diameter: 305 mm, total length: 3,100 mm, total width: 3,100 mm, overall weight: 3,000 kg, cutting length (max.): 3,100 mm, cutting height with scoring (max.): 70 mm, feed rate X-axis: 40 m/min, feed rate Z-axis: 50 m/min, space requirement length: 3,100 mm, space requirement width: 3,100 mm, Equipment: rotational speed infinitely variable, scorer, Panel Sizing System SCHEER PA 4136 – 3100 x 3100 The PA 4136 is a high-performance, electronically controlled panel saw designed for precise, efficient, and automated cutting of wood-based materials. Ideally suited for industrial applications in joineries, furniture production, and panel processing. Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months CE-compliant and dust-tested (limit value < 2 mg/m³) Key Technical Data & Equipment: - Rip saw FM 20-3100 with hardened guides - Automatic forward & return travel of the saw unit (automatic lowering during return) - Feed drive via three-phase gear motor, frequency inverter controlled - Feed speed: 2 – 40 m/min (stepless) - Return speed (rapid traverse): 50 m/min - Extraction channels in machine base & pressure beam - Score saw blade adjustable externally (without opening the hood) - Safety hood locking with lamella curtain SZ 5008 - 3-step cutting height adjustment LA 4143 - 6 cut-out sections in the pressure beam for residual cuts down to 5 mm - Saw motor: 7.0 kW | Scoring motor: 1.1 kW (switchable) - Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: - Angle pressure device WP 5003 with clamping claw for cross cuts - Adjustment range: 2400 mm - Fully automatic control via DNC-AT Podpfx Ajwrn Efjirerc - Material feed table HP 5091 - 2 upper guides, rack-and-pinion guidance - Servo drive for material pusher - Feed speed: 25 m/min (safety limited) - Return: 40 m/min - 6 clamping fingers, 4 double roller tracks - Table length: 3100 mm | Fence depth: 3150 mm - Closed Pertinax surface in the area of the angle fence Control & Operation: - Operating system: Ubuntu Linux - Integrated PC with hard disk, parallel & serial interfaces - Network capable (LAN/WLAN), remote maintenance via internet (TeamViewer, Remote Desktop) - USB printing function - Multilingual dialog programming - 15" flat screen, multifunction keyboard on a swiveling control console - Graphic display of cutting plans and processes Software / Programs: - OPTIMAX: Office optimization, waste calculation, material requirements - OPTIMIN: Direct optimization at the machine PC with parts list entry - Processing via USB, diskette or online (optional) - Manual, automatic & special operation modes (e.g. grooving, veneered parts) Additional Equipment: - Angle fence table HP 5085: 1,720 x 800 mm | Pertinax overlay - Workpiece support table HP 5025: 1,720 x 800 mm | Pertinax overlay - Air cushion system LK 5030 integrated in both tables - Circular saw blade KSB 4005: Ø 305 mm, Z = 60 - Circular saw blade KSB 4006: Ø 200 mm, Z = 60, tapered Reliability in Continuous Operation: This machine is in use worldwide – under extreme conditions. Whether in the dry climate of Africa or in high humidity regions of Southeast Asia (e.g. Thailand): The PA 4136 runs reliably in 3-shift operations – 365 days a year – and stands out for its outstanding stability and durability. Warranty: We are so convinced of the quality and stability of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electronic supply parts and wear parts.) 📞 Contact us for an individual offer or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning, and training available upon request.

Condition: used, SECOND-HAND MULTIPLATENS BENDING PRESS Prodpfx Ajwry H Ueirjc - 7 platens - Platen dim. mm. 800x800 - Opening mm. 1600/1800 - Cylinder diam. 350 mm.

Condition: new, Year of construction: 2026, Workpiece height 8-45 mm (optional: veneering up to 60 mm) Minimum workpiece length 100 mm Minimum workpiece width 100 mm Edge thickness 0.4-3.0 mm Feed speed 9.5 m/min Cutting unit - engine power 1 x 0.27 kW Milling unit 2 x 0.35 kW Milling unit 12,000 rpm Corner finishing unit - minimum workpiece length 250 mm Corner finishing unit - minimum workpiece length 1 x 0.35 kW Corner finishing unit 12,000 rpm Prsdpfx Aijv Duvvorsc Pre-milling unit 1x 1.1;1 x 0.75 kW Pre-milling unit 12,000 rpm Edge cutting unit: Glue removal unit: Polishing unit - engine power 2x0.18 kW Polishing unit 2800 rpm Retractable support with rollers: Diameters of exhaust ports fi 120 mm Compressed air pressure 6.5 bar Total power 6.7 kW Dimensions - L x W x H 4200x800x1500 mm Weight 1180 kg + 2000 euros for option with a PUR glue

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE!! For sale: a used Felder membrane press MVP with a tiltable worktable. The machine is in like-new condition and has been serviced and inspected by our professional staff. (Fully functional) Technical data: Pedexzppbspfx Airerc - Worktable: 3290 x 1560 mm - HPL vacuum table with channels - 3 mm rubber membrane - Rotary vane vacuum pump - Undercarriage The membrane press is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: press, veneer press, pneumatic press Reference: R-D1618

Condition: used, functionality: fully functional, load capacity: 3,500 kg, Rotator ISO Class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Pjdpfx Ajw Ermasirjrc Description: ISO 3A (51 cm), capacity 3,500 kg, 360° rotator, width 930 mm / 1000 mm, ID OS1679

Condition: excellent (used), Cutting dimensions 4300x4300 mm label printer 4 air tables table length 2.2 m 7 grippers pneumatically extendable stops for cutting veneered panels angle cutting unit main motor power 18 kW scoring saw motor power 2.2 kW cutting height 125 mm saw carriage feed speed 0-150 m/min pusher beam feed speed 0-90 m/min control system: CadMatic 4.0 year of manufacture 2011 Prsdpfszuk Skex Airec operating hours: 5800

Condition: used, Handtmann VF 610 Vacuum Filler The Handtmann VF 610 vacuum filler is the ideal solution for the precise filling, portioning, and linking of food products. These filling machines are widely used in various industries, including bakeries, butcher shops, convenience food, snacks, salads, cheese, fruit and vegetables, processed meat products, fish, vegan and vegetarian products, baby food, and pet food. The fillers are robustly constructed and comply with the strictest standards and requirements applicable in the modern food processing industry. Thanks to the intuitive touchscreen control, different programs can be easily set. The filler can be equipped with various auxiliary machines, including clippers, forming machines, and diaphragms. This filling machine is entirely made of stainless steel. Technical specifications: - Production capacity: 3,000 kg/h - Functions: filling, portioning, linking - Portion size: 5 g – 100,000 g - Number of portions: up to 450 portions/min - Filling pressure: 50 bar - Hopper capacity: 40 L / 100 L - Integrated vacuum system: Busch 16 m³/h Predpfxezwlwgo Airoc - Equipped with: linking mechanism (34-5) - Voltage: 400 V (3 + N, 50 Hz) - Power: 3.5 kW - Year of manufacture: 2005 - Weight: 480 kg - Machine dimensions (W x D x H): 1,070 x 950 x 1,750 mm

Condition: used, Year of construction: 1997, Used Machine Year of manufacture: 1997 Condition: Overhauled by a Heesemann factory technician, including a new feed belt Features and Technical Specifications: - 1 automatic belt sander with combination unit - with electronic articulated pressure beam - for sanding soft and hard veneers - calibrating and fine sanding of solid wood - Calibration of workpiece carrier panels Pjdpfoz A H Eyjx Airsrc - Removal of defective veneers and coatings - Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings - Sanding of barrier films - With graphical operator terminal - NC-controlled thickness adjustment from 3 to 150 mm - Activation of the calibrating roller via the terminal - With patented CSD articulated pressure beam for compensating workpiece tolerances up to 2 mm - Sanding width: 1,100 mm - Sanding belt length: 2,150 mm - Frequency-controlled sanding belt speed: approx. 2–18 m/sec - Sanding shoe width: 100 mm - Sanding unit drive: 15 kW - Feed speed: 5/10 m/min - Compressed air: 6 bar - Compressed air consumption: 15 NL/min - With belt dust extraction: 490 l/min - Exhaust ports: 1 x 160 mm, 2 x 100 mm - Air requirement for grinding unit: 1,800 m³/h - Required air velocity: 20 m/sec - Total power connection: approx. 17 kW - Dimensions: 1840 x 1670 x 2200 mm - Weight: approx. 2000 kg

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, overall weight: 5,400 kg, working width: 1,350 mm, grinding height: 160 mm, brushing unit diameter: 250 mm, working height: 920 mm, grinding width: 1,350 mm, height adjustment type: electric, workpiece width (max.): 1,350 mm, workpiece height (max.): 160 mm, Costa Levigatrici BA R5 series machine for texturing wood, veneer, furniture panels, and parquet. The machine has undergone inspection and servicing. The machine features stepless adjustment for each texturing unit. Fixed working height: 920 mm. Operating speed: 3-25 m/min. The machine is equipped with a vacuum system for holding small parts on the table. Equipment: 1. 250 mm steel wire brush, 0.35 mm wire – 18 kW motor 2. 250 mm Tynex/Abralon brush, K46 grit – 18 kW motor 3. 250 mm Tynex/Abralon brush, K60 grit – 11 kW motor Psdpfx Aoztl R Eoirorc 4. 250 mm Tynex/Abralon brush, K80 grit – 11 kW motor 5. 250 mm Tynex/Abralon brush, K120 grit – 11 kW motor

Condition: used, used, top condition Machine cleaned and lubricated Partially overhauled. Emergency stop button renewed. All sliding pads replaced Motor cover repaired. Oscillation overhauled and adjusted. Test run conducted Manufacturer: SCM Samco Model: Unilev 15 Machine No.: 98510909050 Motor: 2.2 / 3 kW Oscillation: pneumatic, infinitely variable Veneer edge sanding unit Front table approx. 1400 x 220 mm Rear table approx. 1440 x 220 mm Tilting table double-sided Belt tension pneumatic Belt length 2170 mm Belt width 150 mm 2 belt speeds: 10 / 20 m/sec mobile Round edge sanding device with support table approx. 500 x 400 mm Extraction connection D 120 mm Required space approx. 1500 x 750 x 1400 mm Weight approx. 490 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Pedjy H N Tmspfx Airorc Delivery in as-inspected condition, without warranty or guarantee

Condition: excellent (used), Year of construction: 2018, Complete production line, machinery for window manufacturing Complete window manufacturing system, consisting of: 1. Window processing line Weinig Conturex C 125, year of manufacture 2018, software Klaes 2. Window tooling Oertli 3. Mortise and tenon press WEINIG ProfiJoint 10/6100 LI, year of manufacture 2018 4. Glulam press Patzleiner LHP14 Eurolinie, year of manufacture 2010 5. Veneer press OMC PL105 30/13, year of manufacture 2018 Pjdjzx Ti Hspfx Airjrc 6. Frame press Casolin Euro 3, year of manufacture 2017 7. Profile milling machine Schöberl, year of manufacture 2010 8. Edge profiling machine SCM Kontur, year of manufacture 2003 9. CNC machining center SCM Record 240 NT, year of manufacture 2008, software DDX 10. Oertli tool set 11. Wide belt sanding machine SCM DMC SY TM 1650, year of manufacture 2018 12. Painting system Vidali Finishing, year of manufacture 2019, consisting of: spray booth, spray guns, pumps, overhead conveyors 13. Table saw Felder K 740, year of manufacture 2019 14. Table router Felder F700Z, year of manufacture 2020 15. Table saw Felder K 700, year of manufacture 2020 16. Double miter saw SML Silver P35, year of manufacture 1999 17. Assembly stop table Ruchser, year of manufacture 1995 18. Assembly table Ruchser RU 4 SSP, year of manufacture 1995 19. Glazing table Ruchser RU SW1 90, year of manufacture 1995 20. Workshop cranes Schmalz, 3 units, year of manufacture 2012 21. Cross-bar milling machine Stegherr KSF, year of manufacture 1980 22. Belt sanding machine Kündig Basiq, year of manufacture 2005 23. Belt sanding machine Löwer LZ1, year of manufacture 1995 24. Glue application machine 25. Filling table Barth, year of manufacture 2018 26. Miter saw Omga BR M 4 DX, year of manufacture 2019 27. Table drill Ganner 109, year of manufacture 1988 28. Drill Ganner 370, year of manufacture 1994 29. Dust extraction system Mion & Mosole SSL, year of manufacture 2004 30. Lumber racks 31. Glass bead applicators, 10 units 32. Glass bead applicators, 6 units 33. Glass bead applicators, red, 4 units 34. Glass bead applicators, 4 units 35. Carts, 20 units 36. Mini-mortise milling machine HIRSCH LQP 180, year of manufacture 1992 – Location: Wioska 37. Four-sided planer Weinig Unimat 23, year of manufacture 2004 – Location: Wioska 38. Planer Weinig Uniplan, year of manufacture 2004 – Location: Wioska

Condition: ready for operation (used), Sennerskov Hydraulic Plywood Press for Sale Heavy-Duty Oil-Heated Hydraulic Press – Fully Operational A robust and well-maintained Sennerskov hydraulic plywood press is offered for sale due to changes in production requirements. Originally manufactured around 1970, the press was extensively upgraded with a modern PLC control system in 2014 and has since been used successfully in plywood manufacturing. The machine is fully operational and can be inspected while running in production. Technical Specifications * Manufacturer: Sennerskov * Year of manufacture: Approx. 1970 * PLC control system installed: 2014 * Press format: 3,650 × 2,150 mm * Daylight opening: 270 mm * Hydraulic cylinders: 20 pcs. * Cylinder diameter: 110 mm * Maximum hydraulic pressure: 230 bar * Heating system: Thermal oil heated * Weight: Approx. 40 tonnes * Included equipment: * Mylar sheets * Feeding table Description This is an exceptionally heavy-duty industrial press designed for continuous plywood and laminated panel production. The machine features a highly rigid construction, ensuring uniform pressure distribution across the entire pressing surface. The press has been used for plywood production and is suitable for a wide range of applications, including: * Plywood manufacturing * Veneered panels * Laminated wood products * Furniture components * Specialty composite panels The press was modernized with a PLC control system in 2014, providing reliable and user-friendly operation compared to older relay-based systems. Condition * Fully operational * Can be inspected under power and in production * Press plates are in excellent condition * Press plates are flat and free from known damage or deformation * Well maintained throughout its service life Prjdpfezd Shrex Airoc

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, year of last overhaul: 2025, For sale: a used, professional edge banding machine, Hebrock model AKV 3007 DK-F, manufactured in 2016, complete with additional equipment (detailed below). First owner. Overhauled last year (drive belt and rollers replaced, and the glue pot was refurbished). The edge banding machine operated on a single shift, 8 hours a day, from Monday to Friday. The machine is designed for efficient edge banding of furniture components with PVC, ABS, melamine, and veneer edges. This model is valued for its high-quality processing, robust construction, and ability to operate in continuous mode. Very good condition – the machine is in fully operational condition, regularly serviced, and ready for use without any additional investment. VAT invoice 23%. Ready for pickup. The machine is available for viewing by appointment in Borów (83-332). Please contact me by phone for more information, as well as videos and photos of the machine in operation. Main parameters and specifications: - Gluing system: Top-mounted hopper for granules. The machine supports standard (EVA) and polyurethane (PUR) adhesives, as well as zero-joint systems. - Edge dimensions: Edge banding thickness from 0.4 to 3 mm for components with a thickness of 10 to 60 mm. - Power supply: 400 V / 3 Ph / 50 Hz electrical connection. Maximum power consumption is 14 kW. - Units: Equipped with a scraper, trimming cutter, corner rounding cutter, profiling cutter, and polishing unit. - Additional equipment: Pneumatic beam phase adjustment, optional interchangeable glue pot, front notching saw, free feed, front spraying, cleaning spray. Pedpfxezizabs Airjrc Detailed description: A German-made Hebrock narrow strip edge banding machine with a system for applying glue to the edge of the component and edge banding with edges from 0.4 to 3 mm thick for components from 10 to 60 mm thick, as well as pre-milling the board with diamond cutters. The machine is optimally equipped for every type of edge. The machine's equipment is fully utilized thanks to the computer and PLC control, which fully controls the individual units. The patented Hebrock system in the edge trimming units (which involves adjusting the lower and upper cutters from outside the machine – during operation), as well as automatic adjustment between thin and thick edges, eliminates the need to open the rear housing, which results in significant time savings, comfort, precision, and user-friendliness. Technical data: • Edge thickness: 0.4 – 3 mm • Component thickness: 10 – 60 mm • Max edge height: 65 mm • Compressed air requirement: approx. 450 l/min • Feed speed: 7-11 m/min, 0.75 motor • Glue heating time: 6 min • Total power consumption: max. 14kW • Electrical connection: 400V, 50Hz • Working height: 880 mm • Machine dimensions [mm]: 5850 x 1425 x 1520 • Machine weight: 1600 kg • Exhaust nozzle diameter: ø 140 mm • Required extraction performance: 24 m3/min • Minimum exhaust air velocity in the exhaust nozzle: 20 m/s • Required vacuum in the exhaust nozzle: 1300 Pa

Condition: new, The HB1000 is a universal edge sander with oscillating belt and sanding head, featuring adjustable height, designed for demanding work with large-sized components. The machine can be used for sanding veneer edges, sanding edges on a mandrel, or using sanding rollers of different diameters. Due to these features, the HB edge sander is suitable for both small and large workshops. Prsdsziag Tspfx Airsc Technical data: Work table dimensions: 1000x400 mm Sanding belt width: 200 mm Sanding belt length: 3200 mm Sanding belt speed: 13 m/min Work table tilt: 0 - 45 ° Motor power: 3 kW Dust extraction port diameter: 2x120 mm Adjustable sanding head height Mechanical sanding belt tensioning Oscillating sanding unit Overall dimensions: Length: 1850 mm Width: 1150 mm Height: 1350 mm

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece height (max.): 45 mm, edge thickness (max.): 2 mm, feed rate X-axis: 12 m/min, total height: 1,300 mm, total length: 4,500 mm, total width: 650 mm, overall weight: 1,300 kg, Equipment: CE marking, documentation/manual, TECHNICAL DATA Overall dimensions (mm): 4500*650*1300 mm Total power: 9.37 kW Feed rate: 12 m/min Thickness of the component to be veneered: 10–45 mm Thickness of the veneer: 0.8–2 mm Length of the component to be veneered: ≥80 mm Width of the component to be veneered: ≥60 mm Predpfezhvggjx Airec Working pressure: 0.6 MPa Weight: 1300 kg SPECIFICATIONS: Delta touchscreen (7 inches) Preliminary milling Gluing Edge trimming unit Finishing milling Corner rounding Radius sanding Polishing unit Frequency inverter

Condition: used, functionality: fully functional, working width: 3,000 mm, HOT PRESS MANNI - Platen dimensions 3000x1300 mm - N. 6 cylinders Psdpfxjx Rqtis Airjrc - Boiler with hot water - wooden waste

Condition: good (used), functionality: fully functional, with heating wire, outreach 920 mm, material 0.4-2 mm, feed rate approx. 15 m/min, required space 1400 x 600 x 1600 mm, weight approx. 350 kg in good condition Price ex works Transport possible at extra cost! Pedpfx Ajyayzaoirerc

Condition: good (used), Plastic panels, plastic laminate, veneer panels, decorative panels, laminated panels -Manufacturer: Resopal, HPL plastic panels 37 pallets 6710 kg -different sizes: see photo parts list Psdowwh H Tspfx Airerc -Thickness: 1 mm / 1.4 mm -Sale: only complete -Dimensions: 3200/1330/H1800 mm / 3100/1330/H1850 mm / 2190/1330/H1600 mm -Weight: 3150 kg / 1640 kg / 1920 kg

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4607269, total width: 2,100 mm, total height: 2,400 mm, total length: 2,830 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 2,850 kg, grinding height: 160 mm, power: 22 kW (29.91 HP), height adjustment type: electric, type of input current: three-phase, conveyor belt speed: 20,500 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, compressed air connection: 6 bar, grinding belt width: 1,380 mm, table height adjustment: 157 mm, power of feed motor: 1,500 W, input frequency: 50 Hz, air demand: 1 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 1,350 mm, pass-through height: 160 mm, 🪵 2002 Viet Challenge 223 Wide Belt Sander – Heavy-Duty Finishing, Very Good Condition Take your wood finishing to the next level with this 2002 Viet Challenge 223 Wide Belt Sander – a high-performance sanding solution for woodworking professionals. Built in Italy for precision and durability, the Viet Challenge 223 is trusted by cabinetmakers, joiners, and production workshops across Europe. Now available in very good condition, this twin-head sander offers consistent results on solid wood, veneered panels, and composite materials – ideal for both calibration and fine finishing. ✅ Key Features – Viet Challenge 223/20 Year of Manufacture: 2002 Condition: Very good – clean, well-maintained, fully operational Sanding Heads: 2 (roughing + finishing) Working Width: 1,350 mm Working Thickness: 3 – 160 mm Minimum Workpiece Length: Approx. 400 mm Abrasive Belt Dimensions: 1,380 mm x 2,620 mm Main Motor Power: 11 kW + 11 kW (approx.) Feed Speed: Variable, 3.7 to 20.5 m/min Powered Height Adjustment Emergency Stop and Safety Features Feed Motor: 1.5kW Lifting Motor: 0.37kW Suction Speed: 25m/s Compressed Air: 6 bar Air Consumption: 17 l/min Prodpfx Aswnr A Heirsc Machine Dimensions: 2830 x 2100 x 2400mm Machine Weight: 2850kg 🧱 Ideal For: Solid wood panel calibration Veneered panel sanding MDF and composite board finishing Flat panel furniture components General wood surface preparation and finishing 📦 Machine Includes: Viet Challenge 223 main sanding unit Twin sanding heads for combined roughing & fine finish Integrated feed table and dust extraction ports Original manuals and safety guards Fully tested and ready for operation 📍 Availability & Delivery This machine is in stock and available for immediate inspection and delivery. Shipping support available throughout Ireland, UK, and Europe. 📞 Enquire Now Looking for a dependable wide belt sander with professional-grade features? This Viet Challenge 223 is a rare find at this price and condition. Viet Challenge 223 Wide Belt Sander for sale Used wide belt sander in very good condition Heavy-duty industrial sander for woodworking Woodworking sanding machine for panels Twin-head wide belt sander for solid wood Viet wide belt sander UK / Ireland / Europe Wide belt sander for furniture and cabinetry production