Used Veneer Vacum Press for sale (27,317)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4200x1650x2150 mm Weight 7500 kg Total power requirement 54 kw Gjdpfx Ahov A Hlgo Hjbg

Condition: good (used), pressing force: 95 t, cylinder diameter: 90 mm, plate width: 1,350 mm, Veneer press Joos Type: HP 90 with 2 intermediate plates, stacking automaton and scissor lift table Pressing area: 2,550 x 1,350 mm Working surfaces: 3 pcs. Intermediate plates: 2 pcs. Pressing force: 95 t Piston diameter: 90 mm Specific pressing pressure: 2.75 kg/cm³ Number of cylinders: 4 Godpjxnqq Hofx Ah Hjbg Heating medium: hot water Total power: 1.3 kW Safety device: emergency cord Dimensions of the press: 3,000 x 1,530 x 2,200 mm Weight of the press: approx. 4 t Elkom heating plates in very good condition Scissor lift table The plates are automatically stacked and thus discharged.

Condition: used, Year of construction: 1995, Used Machine Year of manufacture: 1995 Features and technical data: - Total pressing force: 70 t - Press area: 2500x1300 mm - With gold anodized plates in good condition - Press chamber height: 400 mm - 4 cylinders, diameter 80 mm Gedpjx Enr Sofx Ah Hsbg - ABS safety system, can be deactivated - Emergency cord - Extendable support, left side - Swivel button operation - Hydraulic unit at the bottom - Cleaned and assembled/pressed by ELKOM staff Dimensions: 2900 x 1480 x 2050 mm Weight: 2950 kg Availability: short-term Storage location: 63934 Röllbach

Condition: used, Year of construction: 1976, pressing area: 2500mm x 1250mm opening: 360mm heating plate top: elektric heating plate bottom: defective plate surface: ALU - anodized pressure: 90t number of cylinder: 4 Gbsdpsx Edl Eefx Ah Heg electricity: ca. 33A machine length: 3000 mm machine width: 1500mm weight: 4000kg

Condition: excellent (used), Shelf press Manni 2500×1300 Shelf length: 2500 mm Shelf width: 1300 mm Press with 4 hydraulic cylinders Shelves heated by water from central heating Gbjdpfxoxyvykj Ah Hjg

Condition: ready for operation (used), Year of construction: 1996, Main Drive Pressing force 135 Kn This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine. Application Types Pressing / Laminating Gbodpfx Asx D E Avjh Hog

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3940x1620x2130 mm Gbodpfjv A Hlasx Ah Hjg Weight 5760 kg Total power requirement 32,5 kw

Condition: good (used), overall weight: 5,000 kg, working width: 1,300 mm, plate width: 1,350 mm, Veneer Press Bürkle U140 Gbodpjxn Um Eefx Ah Hjg Working surfaces: 5 pcs. Intermediate plates: 4 pcs. Plate dimensions: 3050 x 1350 mm Working dimensions: 3000 x 1300 mm 8 hydraulic cylinders Max. surface pressure: 5 kp/cm2 Max. operating pressure: 348 bar Heating medium – hot water from central heating Cooling – cooling circuit with WILO pump, expansion tank, piping Weight approx. 5000 kg Good technical condition of plates and hydraulics

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1991 Plate size: 2200 x 1100 mm Equipped with Busse aluminium energy-saving plates (the spots visible in the pictures are only visual; the plates are in perfect condition) Total press capacity: 80 t Press cylinders: 4 x 90 mm Opening width: 400 mm Weight: approx. 3100 kg Total length: 2610 mm Total width: 1240 mm Gbsdpox Enp Rjfx Ah Hsg Total height: 1890 mm Motor power rating: 1.1 kW Connection per electric heating plate: approx. 6.6 kW Availability: short notice Storage location: Röllbach

Condition: like new (used), shelf length 3000 mm; shelf width 1300 mm; water heating; 6 hydraulic cylinders; piston diameter 70 mm; new Teflon films on the shelves Gjdpfjx Hwnfsx Ah Hsbg

Condition: excellent (used), total width: 1,300 mm, total length: 3,500 mm, overall weight: 7,000 kg, operating pressure: 300 bar, transport width: 1,600 mm, transport height: 2,350 mm, transport length: 4,350 mm, Simimpiantin Shelf Press for Veneering 3500×1300 Shelf length: 3500 mm Shelf width: 1300 mm Two loads Press with 8 cylinders Godpfexxpgbsx Ah Hsbg Shelves heated with water from central heating Max. working pressure: 300 bar Piston diameter: 80 mm Machine weight: 7000 kg Machine dimensions: 435×160×235 cm (H)

Condition: used, Veneer Press BÜRKLE U 80 - used - Emergency stop cable, Control via push button ----- Technical Data ----- Pressing area: 2,550 x 1,300 mm Power per heating plate: 9,100 W Max. opening height: 4,000 mm Number of cylinders: 6 pcs. Gbedpfx Aoxfg A Hsh Heg Dimensions (LxWxH): 3,150 x 1,450 x 1,785 mm Weight: 3,700 kg

Condition: used, Year of construction: 1972, functionality: fully functional, pressing force: 240 t, opening width: 150 mm, plate length: 3,300 mm, working height: 900 mm, plate width: 1,400 mm, Automatic Veneer Throughfeed Press Ott Pressomat D 99/240 with 6 cylinders in operational condition: – Heating plate size approx. 3300 x 1400 mm – Total pressing force approx. 240 t – Specific pressing pressure approx. 5 kg/cm² – Number of steel heating plates: 2 pieces – Heating plate thickness approx. 40 mm – Number of hydraulic cylinders: 6 pieces – Piston diameter: 6 x 140 mm – Piston stroke approx. 150 mm – 4-way rack and pinion guide – Working height approx. 900 mm – Plastic Mylar belt – Automatic end-feed loading – Loading station / feed table in front of the press – Conveyor belt approx. 7100 x 1420 mm – Pneumatic control – Roller track (disc rollers) in front of/above the loading station Gbsdpfxsx Nr Eds Ah Heg – Roller track approx. 2000 x 1400 mm – Disc rollers running in a water bath – Roller conveyor with mobile support feet – Outfeed roller conveyor approx. 3300 x 1400 mm – Hot oil boiler HG 80 for heat transfer oil – Heating capacity approx. 80,000 WE/h – Oil burner for light fuel oil – Year of manufacture: 1972, first owner, well-maintained condition – Sale from location Karlsruhe / Southern Germany – Machine is still connected and fully operational – Inspection and test run possible by appointment

Condition: good (used), Year of construction: 1975, Veneer press - 3300 x 1350 mm - External dimensions: 4000 x 1650 x 2450 mm - Year of manufacture: 1975 - Approx. 5500 kg - Electrically heated platen, no dents - HP 120 - Press area height: 400 mm - 6 cylinders Godpox Akuzefx Ah Hebg - Rack and pinion guide

Condition: ready for operation (used), Year of construction: 1994, Ott 2513 Stabil Veneer Press Gbodpfx Aex Dzvxoh Hog 4 cylinders Pressing area 2500 x 1300 mm Electric heating Electric opening and closing Pressing force 90 tons Year of manufacture 1994 Price 7,500.-

Condition: ready for operation (used), Year of construction: 2023, This ORMA NPC/DIGIT 6/95 30/13 AS-BO was manufactured in 2023. A used hot press, it features a press area of 3000x1300 mm, six cylinders, and a maximum press opening of 400 mm. It delivers a total pressure of 90 tons and includes an 18 kW electro-heater for thermo-oil heating up to 120°C. Consider the opportunity to buy this ORMA NPC/DIGIT 6/95 30/13 AS-BO veneer press. Contact us for more information about this machine. Application Types Pressing / Laminating Gbodpfx Ahex D Ngle Hog

Condition: used, Year of construction: 2024, Version: Joos A.B.S. safety system to protect the heating plates in case of incorrect loading or parts left behind. The press is open on all sides, features a robust all-steel construction, and is protected against overload. The maintenance-free hydraulic system is integrated into the oil tank. Step-less pressure adjustment is performed according to a clear pressure diagram. Once the set pressure is reached, the system switches off automatically. Constant pressure is maintained throughout the entire pressing process. The rack-and-pinion guide ensures stable parallel travel of the pressing plates. The press is optimally suited for laminating flat surfaces using adhesives, provided the corresponding technical requirements are met. Technical Data: - Max. pressing force: 1200 kN - Adjustment range: 10 – 100% - Total pressing area: 3100 x 1350 mm - Specific pressure at full capacity: 3.0 daN/cm² (kg/cm²) - 6 cylinders, 80 mm diameter, 400 mm stroke - Hydraulic working pressure: 398 bar - Press room height: 400 mm - Color: Light grey, RAL 7035 Hydraulics: The following components are integrated into the press's hydraulic system: - 1 oil-hydraulic two-stage high-pressure pump - 1 three-phase motor, 2.2 kW - 1 automatic pressure switch - 1 change-over valve - 1 pressure diagram Godpfx Ahoxplbco Hsbg The hydraulic unit is built into the lower section of the press. Controls: Automatic pressure control via electronic controller with setpoint and actual value display. Operation is performed via a clear control panel. The control cabinet is fully integrated lengthwise in the upper section of the press. Operating voltage: 400 V, 50 Hz, 3-phase. ELECTRIC HEATING PLATE 3100 x 1350, GOLD ANODIZED One lower and one upper electric heating plate, 3100 x 1350 mm. The surfaces are anodized, making them extremely hard, scratch- and abrasion-resistant. High-temperature insulation between the heating plate and the press table. Maximum operating temperature: 120°C. (1 section / 2 heating plates.) TEMPERATURE CONTROL Temperature control R 1.1; each heating plate features an electronic temperature controller and a safety temperature limiter around the edge of the heating plate. SWIVEL PANEL OPERATION Operation is via an ergonomic swivel panel control. Location: Rieth

Condition: good (used), Code: 0163 Brand: ITALPRESSE Model: MEC 4/B Hydraulic hot press with water heating for veneer, panels, furniture, custom-made furniture, doors in wood, composite materials, aluminium and various Technical data: Platen dimensions mm 2500 x 1300 Opening mm 300 N° 4 cylinders Total pressure ton 60 Motor power Hp 1,5 Platen heating by water Boiler Gbsdpfx Ahswzbfwo Hsg Perimeter emergency rope Overall dimensions mm 3100 x 1610 x 1830 h Weight kg 3000

Condition: as good as new (ex-display), Year of construction: 2024, new heating plate press, hydraulic ITALPRESSE type XL/6 30-13 with gold anodized plates Touch display control Godpfxedx R Tfj Ah Hobg - electric heating plates 3.000 x 1.300 mm - Total pressure 90 to. - Number of heating plates 2 pcs. - Number of shelves 1 pc. - Cylinder stroke 350 mm - Shelf opening 350 mm - Loading from all sides - Number of impression cylinders 6 pcs. - Diameter of pressure cylinders 85 mm - Power requirement of hydraulic unit 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity 22 KW - High-pressure insulating plates - Working temperature 90° C. - max. temperature 120° C. - Operating voltage 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and parallel guides at 2 corners of the press table made of self-lubricating material - Touch screen electronic control unit for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnosis and display of fault messages - Safety circuit with two-hand operation - Safety rip cord - Safety bracket for lower pressing table Integrated accessories: - Touch Screen TS/400 - EFC electronic flatness control - Gold anodized heating plates (Busse) Location: From stock 54634 Bitburg - immediately available-

Condition: not inspected (used), functionality: unexamined, 5 kW 20 press cylinders 3 press cylinders individually with foot valve Each set of 5 cylinders individually disconnectable with hand valve Assembly machine - cutting length: 9300 mm Total height: 2100 mm Pressing height: 1300 mm Extraction port: 120 mm Gbjdpfx Ahsx Hiqrs Hog

Condition: used, Veneer press OTT Godpfx Ajvdaymeh Hebg Type JU 60S Pressing area max. 225x120 cm Electric

Condition: used, Year of construction: 1990, No. 04502 Veneer press Ott JU 2511/70 Used, year of construction 1990 Electro-hydraulic, approx. 15 kW Aluminum heating plates 2550 x 1100 mm LW Heating electric 4 hydraulic cylinders each 80 mm diameter Total pressing pressure 70 tons Specific pressing pressure 2.5 - 3.5 kg/cm2 Opening width 400 mm Button control for opening - closing - stop Pressure monitoring with automatic readjustment Adjustable limit switch for specific opening width HAWE pump Safety rip cord Incl. electric cable and plug 32 A Incl. electric plans, operating instructions as .pdf file Transport dimensions approx. 2900 x 1400 x 2000 mm LWH Weight approx. 3000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Gedoxwp S Ijpfx Ah Hobg Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Used machine Features and technical data: - Pressing area: 2500 x 1300 mm - With ELKOM gold-anodised energy-saving plates - Total pressing force: 80 t - Specific pressure: 2.5-3.0 kg/cm² - 6 pressing cylinders, each with 68 mm diameter - Opening width: 300 mm Dimensions: 3080x1550x1800 mm Weight: approx. 4700 kg Availability: Approx. mid-April 2026 Gbedpoxwz Iuefx Ah Hog Location: Hesse

Condition: like new (used), shelf length 3000 mm shelf width 1300 mm water heating 6 vertical hydraulic pressing pistons diameter of pistons 70 mm 3 hydraulic thrust pistons for stop movement Gbedoxygciopfx Ah Hjg diameter of pistons 80 mm 6 horizontal hydraulic cylinders loading table 1800x3000 mm unloading table 1500x3000 mm

Condition: excellent (used), Year of construction: 2020, New hydraulic heating platen press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control system - Electric heating platens 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating plates: 2 pcs. - Number of levels: 1 - Cylinder stroke: 350 mm - Daylight opening: 350 mm - All-around loading possible - Number of hydraulic cylinders: 6 pcs. Gsdpfxsxgbxfs Ah Hebg - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V, 50 Hz - Safety specifications according to CE standard Standard equipment: - Movement of the press table with rack-and-pinion and parallel guides at 2 corners of the press table made from self-lubricating material - Electronic control unit with touch screen for machine control and monitoring - Digital timer for adjusting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for adjusting pressing time - Digital diagnostics and fault display - Safety circuit with two-hand operation - Safety pull cord - Safety support for lower press table Accessories included: - Touch Screen TS/400 - EFC electronic flatness control - Gold-anodized heating plates (Busse) Location: Ex stock - Immediately available -