Used Vertical Boring for sale (11,529)

Condition: ready for operation (used), Year of construction: 2002, Movement X-Axis Movement 700 mm Y-Axis Movement 550 mm Z-Axis Movement 500 mm This 3-axis DECKEL MAHO DMC 70 V was manufactured in 2002. It features a 30-position tool changer, a spindle speed of 18,000 rpm, and a chip conveyor. The control system is a TNC 430. Note: tool keys in Z direction are defective. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 70 V machine we have for sale. Contact us for more information about this machine. Application Types Bedexrwi Dopfx Abzjww Milling

Condition: new, Sales from STOCK! Model: AMWP11.2-8100 Max. Working Height: 11.2 m Max. Platform Height: 9.2 m Max. Horizontal Reach: 3 m Up and Over Height: 7.89 m Guardrail Height: 1.1 m Overall Length: 2.53 m Overall Width: 1.0 m Overall Height (Stowed): 1.99 m Platform Dimension: 0.62 x 0.87 m Ground Clearance (Stowed): 70 mm Ground Clearance (Raised): 19 mm Wheelbase: 1.22 m Loading Capacity: 200 kg Occupants: 2 Turning Radius (Inside/Outside): 0.23 / 1.65 m Turret Rotation: 345° Jib Movement: 130° Travel Speed (Stowed): 4.5 km/h Travel Speed (Raised): 0.5 km/h Up/Down Speed: 42/38 seconds Max. Working Slope: X: 2.5° / Y: 2.5° Tyres: Ø 381 x 127 mm Driving Motor: 24 V / 0.9 kW Lifting Motor: 24 V / 3.3 kW Battery: 24 V / 240 Ah Charger: 24 V / 30 A Weight: 2950 kg AC Driving Motor Proportional Joystick Controls Self-Locking Gate Drivable At Full Height Non-Marking Tyres 4 x 2 Drive Automatic Braking System Emergency Descent System Tubing Explosion-Proof System Fault Diagnosis System Tilt Sensor Alarm Bjdoulakkspfx Abzsww Motion Alarm 345° Turret Rotation Horn Hour Meter Charging Protection System Flashing Beacon Drive Enable Charging Indicator Manual Brake Release Lanyard Attachment Point Tie-Down And Lifting Points Platform Load Sense System Emergency Stop Button Swing Out Components Cover

Condition: used, Used FIB Apparatenbouw stainless steel vertical mixing tank - volume 6000 liters - construction material AISI 316, insulation cladding AISI 304 - welded dished top and bottom heads - internal rated atmospheric pressure at 90°C max. temperature, - the vessel is insulated - dimensions (approx): 1820 mm inner diameter (1932 mm outer diameter) x 2330 mm straight side x 3650 mm total height - central botom discharge with diameter 50 mm - has (2) top mounted off-centre agitators JONGIA model LBD 60: (1) stainless steel impellor type agitator driven via NORD gearbox by el. motor, (1) stainless steel double impellor type agitator driven via NORD gearbox by 1.1/1.4 kW, 1400/2780 rpm, 50 Hz el. motor - lid is equipped with a number of flanges and the inspection hole with a diameter of approx. 500 mm - mounted on (3) lugs Specifications: Capacity: 6,000 L Diameter: 1,820 mm Height: 2,330 mm Type Of Heads: Welded dished top and bottom heads Vertical/Horizontal: Vertical Bedpfx Aoxrb Hgsbzsww Type of stainless: AISI 316 Legs/Lugs: 3 lugs Dimensions: 1820 mm inner diameter (1932 mm outer diameter) x 2330 mm straight side x 3650 mm total height

Condition: used, Year of construction: 1998, cutting diameter 1360 mm saw band length 8738x80x1,6 mm cutting width 1060 mm KASTO BBS 1360/1060 block band sawing machine Hydraulic saw blade tensioning, factory-set. Mobile sawing machine for heavy sawing work on large blocks/slabs. Technical data Total drive power approx.: 13kW Saw motor approx.: 7.5kW Max. cutting height with cut monitoring: 1360 mm Bwodpfoxt Uvkox Abzew Max. cutting height without cut monitoring: 1420 mm Cutting height with pressure roller: 1280 mm Min. cutting width: 10 mm Max. cutting width with electromechanical measuring stop approx.: 1000 mm Cutting width without measuring stop: 1060 mm Cutting speed: 14-75 m/min Cutting feed: 0.7-270 mm/min Saw blade dimensions: 8738 x 80 x 1.6 mm or 8738 x 67 x 1.6 mm Rake width: 2.4 mm Saw blade guide: carbide, replaceable and adjustable Saw blade back guide: roller, replaceable Saw blade cleaning: by easily replaceable plastic brushes, motorised Coolant: supplied via two coolant nozzles Pump capacity approx.: 100 litres/min On request, we can also offer you the 7 immediately available saw blades at an additional cost.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, spindle speed (min.): 10,000 rpm, Technical data: Travel X-axis: 635 mm Travel Y-axis: 510 mm Travel Z-axis: 460 mm Manufacturer: Deckel Maho Year of manufacture: 2012 Control: SIEMENS 810D with ShopMill Type of control: CNC Power-on hours: 20,135 h Spindle hours: 7,673 h Total power requirement: 13 kW Condition: As new Description We are selling a 3-axis machining center DMG DMC 635 V ecoline in excellent condition. The machine has been fully measured and stands out due to its extensive equipment. The machine is from 2012 but has only 7,012 spindle hours. The machine has seen very little use and its geometry is close to that of a new machine. Machine features: - Tool measurement (hardware and software) Bwsdpfx Aext N N Esbzjw - Workpiece measurement (hardware and software) - Chip conveyor - 30-position tool changer - Through spindle coolant (20 bar) - Spindle 10,000 rpm - Tool holders - SIEMENS 810D control with ShopMill

Condition: used, Year of construction: 2016, operating hours: 24,000 h, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 880 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 100 m/min, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, feed rate Z-axis: 100 m/min, table load: 400 kg, spindle speed (min.): 10,000 rpm, operating hours of spindle: 500 h, spindle motor power: 40,000 W, number of slots in tool magazine: 36, tool length: 520 mm, tool diameter: 205 mm, 5-Axis Working Area: -> X-axis 1500 mm -> Y-axis 1250 mm -> Z-axis 880 mm Feed / Rapid Traverse: -> X-axis 100 m/min -> Y-, Z-axis 100 m/min Axis Acceleration: -> X-, Y-axis 7 m/s² -> Z-axis 10 m/s² -> Jerk 150 m/s³ Bsdpfxsxtndzo Abzsww Table Load Capacity: -> Max. weight 400 kg Spindle: -> Tool holder HSK 100 -> Speed range 10,000 rpm -> Power (S6/40% duty) 40 kW -> Max. torque 175 Nm Tool Magazine: -> Positions 36 -> Max. tool length 520 mm -> Max. tool diameter (with free adjacent slot) 205 mm -> Max. tool weight 20 kg -> Total load 200 kg -> Tool change time 3 s Machine/Asset does not include any product-related tool, fixture or gripper (robot).

Condition: ready for operation (used), Year of construction: 2021, operating hours: 295 h, Control Unit Brand HAAS Main Drive Spindle speed range 15000 Tool taper HSK A63 Number of axis 5 This 5-axis HAAS UMC 1500 DUO was manufactured in 2021, featuring a high-speed 15,000 rpm spindle, HSK A63 interface, and a 50+1 side-mounted tool changer. It includes internal cooling at 21 bars, chip conveyor, and full 5-axis capabilities for complex machining tasks. Consider the opportunity to buy this HAAS UMC 1500 DUO vertical machining centre. Contact us for more information about this machine. Bwedpfexuldbex Abzjw Application Types Milling

Condition: used, Year of construction: 2011, turning diameter: 530 mm, controller manufacturer: SIEMENS, controller model: 840 D, number of spindles: 1, CONTROLS .. CNC controls SIEMENS 840 D BASIC FUNCTIONS .. design principle: vertical spindle .. number of spindles: 1 .. number of x/z slides: 1 .. number of turrets: 1 .. live positions: yes .. number of c-axes: 1 WORKING RANGE TURNING .. turning diameter (max): 530 mm .. worpiece length max.: 200 mm MAIN SPINDLE .. spindle revolutions (max): 4000 /min .. c-axis: yes X/Z SLIDE .. tool fixture: Turret .. number of tool positions (total): 12 .. - rotation speeds (max): 8000 /min ELECTRICAL SPECIFICATIONS .. total power consumption: 71 kW .. mains voltage: 400 V Bwjdpfxsxt Dkwo Abzew .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 9500 mm .. space requirements -front/back-: 5000 mm .. total height: 4200 mm .. total weight approx.: 13500 kg - Axes: X / Z / C spindle / A turret / including life tool - The machine features a VDI 50 turret with 12 positions. - Feed roller conveyor with pickup station - 20 bar internal cooling

Condition: used, Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (Poland) with a working volume 10000 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2100 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 2.2 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 20 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) stainless steel legs. Last time used in chemical production. Specifications: Capacity: 10,000 L Diameter: 2,600 mm Height: 2,100 mm Type Of Heads: Top flat, bottom elipsoidal Vertical/Horizontal: Vertical Type of stainless: AISI 304 Legs/Lugs: 3 legs Bedexputbjpfx Abzjww

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Strokes: X1050 Y510 Z560 Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Main spindle motor: 11 kW Bwjdpfsxr A Edox Abzow Video of machine in operation available

Condition: used, Year of construction: 2014, Opportunity to buy a DMG vertical machining center from 2014 in very good condition, with 23571 spindle hours. Immediately available for delivery (in Europe as well). Extra: Bwsdpfx Aow Spqhjbzjw Direct measuring system X, Y, Z - inclusive air purge for measuring system Electronic handwheel Active cooling unit for electrical cabinet additional ventilator for control panel actice cooling unit for motor spindle Video available on request. X-AXIS Movement 635 mm Y-AXIS Movement 510 mm Z-AXIS Movement 460 mm Tabel dimensions 790 x 560 mm Max spindle speed 12000 rpm Tool changer 20 places Tool taper SK40 Cnc Control Heidenhain TNC620 - Slimline panel Tool clamping BT40 , for pull studs DIN69872 Spindle hours 23571

Condition: used, Year of construction: 1955, grinding length 1000 mm grinding width 400 mm workpiece height 400 mm total power requirement 11 kW weight of the machine ca. 5 t dimensions of the machine ca. 4 x 2,5 x 2,5 m Bodpfsxuknxex Abzoww

Condition: ready for operation (used), Year of construction: 2012, Control Unit Brand MITSUBISHI Model M720 SSS Main Drive Spindle speed range 15000 Tool taper ISO40 Number of axis 5 Movement X-Axis Movement 1140 mm Y-Axis Movement 610 mm Z-Axis Movement 810 mm Table Table load 850 kg Bwjdpoxqtavefx Abzjw Additional Equipment Air blast through spindle Rotary table with counter-support and hydraulic lock – 360° rotation Heidenhain linear scales on X, Y, Z axes; rotary encoders on A and C axes Coolant through spindle, 20 bar + low-pressure cooling system Renishaw OMP60 workpiece probe + receiver // Renishaw TS27R tool probe Chip flushing system Chain-type chip conveyor Telescopic covers for X, Y, Z axes Full machine enclosure with safety door lock Central lubrication system with oil cooler This 5-axis Pinnacle BX300A was manufactured in 2012. It features a spindle speed of 15,000 rpm, a table size of 1300 × 610 mm, and a 24-position tool magazine. Equipped with a Mitsubishi M720VS control system, it supports complex machining with continuous rotation on the C-axis and tilting on the B-axis. Consider the opportunity to buy this Pinnacle BX300A vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (Poland) with a working volume 12500 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2550 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) legs carbon steel legs. Last time used in chemical production. Specifications: Capacity: 12,500 L Diameter: 2,600 mm Height: 2,550 mm Type Of Heads: Top flat, bottom elipsoidal Bedpfx Ajxpur Rjbzsww Vertical/Horizontal: Vertical Type of stainless: AISI 304 Legs/Lugs: 3 legs

Condition: good (used), Year of construction: 2008, For sale is 1 Scherer VDZ 80 DS with the following technical data: Rotation diameter: 120 mm z-axis (vertical): 265 mm x-axis (horizontal): 280 mm Diameter in the front bearing: 85 mm Diameter in rear bearing: 75 mm 2 x A4 spindle Spindle unit drive Rated power: 16.8 kW Nominal torque: 100 Nm Speed: 1000 - 7000 rpm Traversing speed z-axis: max. 30 m/min Traversing speed x-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Bwodpfx Abexr A Dtjzsw Weight: 9000 kg Complete documentation available. Attention! The system will probably have to be reprogrammed somewhat, as it was part of a complete line. However, a single program is available.

Condition: used, Year of construction: 2007, table length 3000 mm table width 2000 mm table load 25 t longitudinal adjustment 1500 mm Bjdow Rrbtjpfx Abzsww rapid traverse 6 m/min total power requirement 12 kW weight of the machine ca. 18,5 t dimensions of the machine ca. 5 x 2,3 x 1,2 m Table has hydrostatic guideways and SPS (Siemens) control.

Condition: ready for operation (used), Year of construction: 2021, General Data Measurements width 1700 mm Measurements height 2240 mm Machine weight 3500 kg Measurements depth 2100 mm Control Unit Brand SIEMENS Model SINUMERIK 828D Main Drive Spindle speed range 80 – 10000 rpm Tool taper SK 40 Movement X-Axis Movement 600 mm X-Axis Feed Force 10000 mm/min X-Axis Rapid Traverse 24000 mm/min Y-Axis Movement 400 mm Y-Axis Feed Force 10000 mm/min Y-Axis Rapid Traverse 24000 mm/min Z-Axis Movement 450 mm Z-Axis Feed Force 10000 mm/min Z-Axis Rapid Traverse 20000 mm/min Additional Equipment Rigid cast-iron frame construction Linear guides on all three axes Automatic double-arm tool changer (16 stations) Complete coolant system Central automatic lubrication Bwjdpfx Ajxqtgvebzjw Air blast system for spindle cleaning Machine enclosure with doors Machine and signal lights Documentation in English CE-certified This 3-axis WAGNER WMC 600 L was manufactured in 2021, featuring a robust cast-iron frame and linear guides on all axes. It includes a Siemens 828 Basic ShopMill, an automatic double-arm tool changer with 16 stations, and a complete coolant system. The spindle supports speeds up to 10,000 rpm with a power of 11 kW. If you are looking to get high-quality milling capabilities consider the WAGNER WMC 600 L machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2004, For sale are 2 pieces of shearer VDZ 80 DS with the following technical data: Rotation diameter: 120 mm z-axis (vertical): 265 mm x-axis (horizontal): 280 mm Bedpfx Ajxr A Dgebzsww Diameter in front bearing: 85 mm Diameter in rear bearing: 75 mm 2 x A4 spindle Spindle unit drive Rated power: 16.8 kW Nominal torque: 100 Nm Speed: 1000 - 7000 rpm Traversing speed z-axis: max. 30 m/min Traversing speed x-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Attention! The system will probably have to be reprogrammed somewhat, as it was part of a complete line. However, a single program is available.

Condition: ready for operation (used), Year of construction: 2002, General Data Measurements width 3750 mm Measurements depth 3723 mm Measurements height 3370 mm Machine weight 12000 kg Main Drive Spindle speed range 30000 rpm Bwjdpsxtgn Sjfx Abzow Movement X-Axis Movement 1000 Y-Axis Movement 620 Z-Axis Movement 500 This 4-axis Fidia K 165 BSH was manufactured in 2002. It features a PCN775 control unit and a main spindle with a speed range up to 30,000 rpm. The machine dimensions are 3723 mm in length, 3750 mm in width, and 3370 mm in height, supporting a maximum table load of 2000 kg. If you are looking to get high quality milling capabilities consider the Fidia K 165 BSH machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 1980, Info: Machine was embedded in a pit! - Tractive force: max. 25,000 kg - Clearing stroke: max. 630 mm - Clearing speed: 1 - 10 m/min - Return speed: 7 - 25 m/min Bedexr Aw Tepfx Abzeww - Total connection requirement: 45 kW - Machine weight: 5,500 kg

Condition: ready for operation (used), Year of construction: 2012, operating hours: 38,984 h, Control Unit Brand SIEMENS Model DGM ERGOline Bwsdpfjxpywxex Abzjw Main Drive Number of axis 4 Media Chip conveyor Yes This DMG GILDEMEISTER CTV 250 Vertical lathe machine was manufactured in 2012 in Germany and has 38984 production hours. It is equipped with a SIEMENS control unit. The machine dispose of a chip conveyor and a high pressure cooling system with paper filter. The revolver head was completely renewed at the end of the previous year. Application Types Turning

Condition: good (used), Year of construction: 2004, - Tractive force: max. 160 kN - Clearing stroke: max. 1000 mm - Truck feed stroke: max. 630 mm - Table top width: 630 mm Bjdpfexr Aw Hsx Abzoww - Broaching speed: 10 m/min - Return speed: 23 m/min - Installed power: max. 88 kW - Machine weight: 12,410 kg

Condition: ready for operation (used), Year of construction: 2018, Main Drive Spindle speed range 15000 Number of axis 3 This 3-axis Hyundai WIA KF 5600 vertical machining center was manufactured in 2018. It features a 30-position automatic tool changer, a high-speed spindle at 15,000 rpm with BBT40 taper, and advanced Siemens software options including 3D simulation and real-time machining recording. Ideal for precision machining with its equipped glass rods for accurate measurements. Consider the opportunity to buy this Hyundai WIA KF 5600 vertical machining center. Contact us for more information about this machine. Application Types Milling Bwjdpfsxpyqfjx Abzjw

Condition: ready for operation (used), Year of construction: 2022, General Data Machine weight 13000 kg Main Drive Spindle speed range 8000 rpm Spindle motor power 11 / 7.5 kW Movement X-Axis Movement 925 Bodpfx Asxr Rw Uebzoww Y-Axis Movement 1050 Z-Axis Movement 600 This 5-axis Okuma MU-6300V-L was manufactured in 2022. It features a vertical machining center with turning function, equipped with a multifunction spindle capable of 12,000 rpm and a turning spindle speed of 800 rpm. The machine includes a high-pressure coolant system at 70 bar, a 64-tool automatic changer, and advanced collision avoidance. It supports 5-axis simultaneous machining, enhancing precision and efficiency. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, operating hours: 6,000 h, Control Unit Brand HEIDENHAIN Model TNC 640 This 5-axis SPINNER VC 1650-5A-9 was manufactured in 2018, featuring a dynamic motor spindle up to 9,000 rpm, HIGH-TORQUE version, and Heidenhain TNC640 control. It includes a 360° rotary table, additional clamping table, and an automatic tool changer for 96 tools. Ideal for complex 5-axis simultaneous interpolation and precision machining. If you are looking to get high-quality milling capabilities consider the SPINNER VC 1650-5A-9 machine we have for sale. Contact us for more information. Application Types Bwodpfsxtq Uvox Abzew Milling