Used Vertical Cnc Milling Machine for sale (67,151)

Condition: used, Year of construction: 2001, machine/vehicle number: .01720, with CNC control, manufactured by FIDIA, type: C20, travel ranges: X-axis: 2400 mm, Y-axis: 2850 mm, Z-axis: 1000 mm, with automatic tool changer with 20 tool stations, with T-slot clamping plate, size: approx. 2000 x 1800 mm, coolant system. Hodpfo Af Nlmsx Airow

Condition: used, Year of construction: 1987, Universal CNC Milling Machine CNC MAHO MH 400 E Travel X: 400 mm Travel Y: 375 mm Travel Z: 250 mm Numerical Command CNC PHILIPS 432 Table: 700 x 270 mm Cone: SA40 Hjdpfx Aioz Nx Hworjw Spindle speed: from 80 to 4000 RPM Year of construction: 1987 Central lubrication Manually swivel head Supplied with doc + machine parameters Voltage: 380 V Width: 2200 mm Depth: 2000 mm Total height: 2000 mm Weight: approx 1,5 T

Condition: good (used), VEB Fritz Heckert FU 250x1000 milling machine Manufacturer: VEB Fritz Heckert Type: FU 250x1000 Hsdpfx Aietryc Njrsw X-axis: 900 mm Y-axis: 300 mm Z-axis: 380 mm Speed: 28-2800/min Speed: 10-630 mm/min Dimensions: 1240 x 340 mm Speed: 6 kW, 35 A Load: 1.7 t Dimensions: 1580 x 1420 x 1470 mm

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 3200mm/1400mm/500mm, table dimensions X/Y: 3000mm/1250mm, max. workpiece width: 1500mm. Speed: 10000rpm, spindle mount: CAT50, spindle power: 35hp, tool positions: 30, dimensions X/Y/Z: approx. 8000mm/4000mm/3500mm, weight: approx. 24000kg. On-site inspection is possible. Hedpfx Aistx Dpferjw

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Hedpoy N Du Djfx Airew Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: ready for operation (used), CNC Milling Machine, Deckel FP4NC, Used machine Manufacturer: Deckel Model: FP4NC Serial number: 31549 Travel range (per axis): X-axis: 560 mm Y-axis: 500 mm Z-axis: 450 mm Table specifications: Hodpfxewrdu Ae Airow Length: 900 mm Width: 530 mm Max load capacity: 450 kg Feed rates: X-axis: 3600 mm/min Y-axis: 3600 mm/min Z-axis: 3600 mm/min Spindle specifications: Spindle taper: ISO 40 / BT / MK Spindle power: 7.5 kW Max speed: 5000 RPM

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 208, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 15,000 m/min, table width: 1,100 mm, table length: 450 mm, table load: 700 kg, overall weight: 7,000 kg, - Year of manufacture: 1994 - Single owner, used in-house - Fully operational, powered on, ready for demonstration - Control system: Fanuc 0MC - X-axis travel: 800 mm - Y-axis travel: 450 mm - Z-axis travel: 510 mm - Table working area: 1100 x 450 mm - Max. permissible workpiece weight: 700 kg - Number and width of T-slots: 5 x 18 mm - Spindle speed range: 20 - 6000 rpm - Rapid traverse speed: 18000 (X) x 18000 (Y) x 15000 (Z) mm/min Hedsz Ru Utepfx Airew - Tool holder: SK40 / MAS BT40 - Tool magazine: 25 stations - Machine weight: 7000 kg - Serial no.: 208 Net price ex works, unloaded, at location Luckenwalde (Germany), excluding transport

Condition: refurbished (used), Year of construction: 2017, functionality: limited functionality, WMW UNION CNC table-type boring mill, completely overhauled and modernized in 2017. The machine has been rarely used since then. It is currently disassembled and kept in storage. Cannot be inspected under power!!! Hsdpfx Aj Af U Dvsirjw

Condition: good (used), Year of construction: 1990, HEIDENHAIN TNC-355 Hsdpfx Aiefg Ep Dersw Working travels 850x500x450mm Table size 1250x500mm Spindle taper 50 Spindle speeds 35,5-1800 rpm Misc.accessories MARCELS MASCHINEN CH

Condition: used, Offered for sale: CNC milling machine with enclosed machine guarding. Equipped with a milling spindle, enclosed machining area with viewing window, workpiece support and compressed air hose. Inspection possible by arrangement. Hodpfx Aij Aga Iqorow

Year of construction: 1989, condition: ready for operation (used), Weight: 1.5t, operating hours unknown, with documentation, machine vices and fixtures are available as accessories, the machine ran in one shift operation and was serviced regularly. An inspection on site is possible. Hjdpfx Aezbb Spsirow

Condition: used, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, quill stroke: 80 mm, Milling Machine - Vertical Manufacturer: DECKEL Model: FP 2 A Control: Dialog 11 Technical Data: - X-travel: 300 mm - Y-travel: 300 mm - Z-travel: 400 mm - Speed range: 40 – 4,000 rpm - Tool holder: SK 40 - Swivel range: +/- 90° Hodpfx Aiezq Hlfsrew - Quill stroke: 80 mm Equipment & Accessories: - Enclosure In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools shown, and clamping devices are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Year of construction: 2004, condition: used, Emmegi Comet Isola, 4 Axis CNC Vertical Machining Centre for Milling, Drilling and Tapping Aluminium with Emmegi CNC Control (Isac Cam Editor), Bed Length 6800mm, X Axis 5500mm, Y Axis 525mm, Z Axis 380mm, Pneumatic Vices and Auto Vice Positioning. S/No. M271748 (2004) Machine Weight 5300kg Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Hjdpfsz Rnwzex Airow

Condition: used, Offered is a CNC knee-type milling machine, model FU 400 × 1600. Clamping surface: milling table with T-slots. CNC control: VEB Numerik CNC-H 646. Equipped with a machine vise, flexible coolant hose and swiveling CNC control panel. Inspection possible by arrangement. Hsdpfxe Afpkwo Airjw

Condition: new, Year of construction: 2027, functionality: fully functional, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, workpiece height (max.): 400 mm, workpiece weight (max.): 200 kg, spindle speed (max.): 26,000 rpm, number of slots in tool magazine: 30, CNC machines from HG GRIMME SysTech Perfect for: Highly efficient 3D milling for small workpieces – precise milling with high part output Materials: Plastics, composite materials such as CFRP / GFRP, model-making materials, aluminum Industries: Automotive, aerospace, transportation & logistics, leisure industry, sanitary, boat building, automation Availability: March 2027 Model: 5-axis CNC milling machine RT-F 1400 Spindle data: 8 kW / 6.4 Nm; 1000-36000 1/min; HSK E 40 Rapid traverse X/Y/Z: 80/80/60 Part dimensions X/Y/Z: 1000 x 800 x 400 Control system: Fanuc with IPC, handheld terminal HMOP Type B Hsdpfs Adqr Tjx Airow Tool changer: 12 tools Tables: 1 rotary table Vacuum system: yes Tool breakage and length monitoring: Renishaw-TS 27 R Other: Chip tray, perforated metal grid, sheet metal for extraction on the rear Year of manufacture: 2026 Condition: new

Condition: used, CNC universal tool milling machine DECKEL, type FP 4 ME - DEFECTIVE Machine No. 2205, Year of manufacture 1989 CNC path control: GRUNDIG Contur 3 - Control system does not boot up Travel ranges: X: 485 mm, Y: 385 mm, Z: 380 mm Table size: 800 x 460 mm Spindle mount: ISO 40 Hodpfoz Ebvrex Airew Spindle speed: 63 - 3150 rpm, 22 steps Feed rate range: 2 - 3000 mm/min, stepless Quill movement: Horizontal and Vertical Main spindle drive: 3.7 / 4.4 kW - Hydraulic tool clamping - Swiveling control panel - Electronic handwheel - Fixed angular table - Coolant system in the machine base - Control cabinet located next to the machine, dimensions L x W x H: 800 x 750 x 1150 mm Space requirement L x W x H: 2000 x 2000 x 2000 mm Weight approx.: 2400 kg Good condition - control system does not boot up.

Condition: used, Year of construction: 1990, functionality: unexamined, machine/vehicle number: HVM-7580, table width: 1,000 mm, table length: 3,300 mm, type of input current: three-phase, input voltage: 380 V, CNC bed milling machine Anayak HVM-3300 in a moving column design, manufactured in 1990. Identified as VHM-3300 on the housing. Serial No. HVM-7580, connection 3 x 380 V, 50 Hz, 60 A, 40 kW. Fixed T-slot table 3,300 x 1,000 mm. Duplomatic Tracemaster SERF 2000 control system with CNC operating unit and screen, switchable between CNC and copying mode. Hedpfx Aiez A Uigorjw Milling head with vertical spindle and position indicator on the control panel, hydraulic unit with hydraulic tool clamping, central lubrication, telescopic covers, protective housing with sliding doors. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex works; dismantling and loading by agreement. All information without guarantee.

Condition: not inspected (used), functionality: fully functional, machine/vehicle number: 1-105-2, spindle speed (max.): 3,000 rpm, total width: 3,590 mm, total length: 4,520 mm, total height: 3,400 mm, table length: 1,000 mm, table width: 1,000 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, power: 0.033 kW (0.04 HP), controller manufacturer: HEIDENHAIN, controller model: TNC 355, Immediate delivery. Hsdpfx Aisz Hblperow

Condition: used, Year of construction: 2018, travel -x axis 1.300 mm travel -y axis 670 mm travel -z axis 625 mm control HEIDENHAIN - TNC 620 number of spindle speeds 12.000 U/min tool taper SK 40 table dimension (L x W) 1.500 x 670 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 6700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in well-maintained condition, has been used exclusively for machining aluminium and plastics, and is available for inspection under power at any time. The machine video from the production plant will be shared on request. Hjdps Adflusfx Airsw Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Hedpsquhbgjfx Airow Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex-yard: CNC tool milling machine, Deckel Type FP 5 – 80 Year of manufacture 1995 CNC control: Dialog 12 Universal table: 750 x 520 mm Travel distances X / Y / Z: 800 / 550 / 500 mm Drive power: 9 kW Spindle quill stroke: 80 mm Electronic handwheel Hjdpj Aa Ikrefx Airow Spindle speeds: 32 – 5000 rpm Feed rates: 0 – 6000 mm/min Weight: 4.5 tons Price: Euro 2,500.00 (plus VAT), ex-yard.

Condition: excellent (used), functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 550 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, HERMLE UWF 1001 CNC milling machine With CNC control, HEIDENHAIN / Type: TNC 155 Machine probe / coolant system Hjdpfjz Dum Ujx Airow Enclosure / cabin / control cabinet: 1260 x 500 x 1700 mm Travel ranges 700 x 550 x 550 mm / Clamping area, table surface: 1000 x 490 mm

Condition: used, CNC universal tool milling machine DECKEL, type FP 4 MA Machine No. 2204-1734, Serial No. 25842, Year of manufacture 1989 CNC path control: GRUNDIG Contur 2 Travel distances: X: 485 mm, Y: 385 mm, Z: 380 mm Table size: 800 x 460 mm Spindle mount: ISO 40 Spindle speed: 63 - 3150 rpm, 18 speeds Feed rate: max. 2000 mm/min Distance table - spindle nose: max. 480 mm Arbor displacement, vertical: 80 mm Arbor displacement, horizontal: 150 mm Main spindle drive: 3.7 / 4.4 kW Power supply: 400 V, 50 Hz, 13 kW - CNC path control: GRUNDIG Contur 2 with TFT screen - Hydro-mechanical tool clamping - Swiveling control panel - Electronic handwheel for all three axes - Mechanical handwheels for all three axes - Fixed angular table Hedpezwmc Rofx Airjw - Coolant system in the machine base - Central lubrication - Control cabinet located next to the machine, dimensions W x D x H: 800 x 750 x 1150 mm Space required, dimensions W x D x H: 2400 x 2300 x 2000 mm Weight: approx. 2400 kg In good condition

Condition: used, Year of construction: 1988, Deckel FP4MA 2204 – CNC Machining Center - General overhaul in 2022 - Heidenain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with retractable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gearbox - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct path measurement - Collision protection coupling in the Y and Z axes - Year of manufacture: 1988 - Includes tool holders, drilling/milling tools, and tool cart Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually adjustable on spindle head: 150 mm Main drive: - Pole-changing three-phase brake motor: Gearbox with right/left rotation - Power: 3.7 / 4.4 kW - Spindle speed: 63 - 3150 rpm (18 steps) - Step jump: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Disc spring pack - Tool release: hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z axis: 3000 mm/min Table carriage: Hodpfxe Adr R De Airow - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space requirement (with safety area): approx. 2300 x 2500 mm - Machine weight including vertical milling head and rotary table: approx. 1830 kg - Operating voltage: 400 V - Total connection value: 12.5 kVA - Floor load: 3000 kg/m²

Condition: used, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, Vertical Milling Machine Manufacturer: DECKEL Model: FP 4 NC Control: Heidenhain TNC 355 Technical specifications: - X-travel: 560 mm - Y-travel: 500 mm - Z-travel: 410 mm Hodpfx Ajzq Hlloirjw In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.