Used Weight Balance for sale (59,417)

Condition: excellent (used), axle configuration: 3 axles, first registration: 04/2003, loading space length: 8,170 mm, loading space width: 2,440 mm, total length: 8,050 mm, total width: 2,450 mm, suspension: air, tire size: 385/65-R252.5, wheelbase: 5,780 mm, Year of construction: 2003, Equipment: ABS, = Additional options and equipment = - ADR - EBS - Lift axle - Air suspension - Disc brakes Lodpfjykad Nsx Akfohf = Notes = Very nice 2003 BURG 20FT ADR swap body chassis with ABS/EBS, SAF axles with disc brakes (INTRADISC), ADR approval (EXII, EXIII, FL, OX, AT), 1st axle = lift axle, 1x20FT, unladen weight: 3,290 kg, permissible total weight: 39,000 kg, tyres: 385/65-R22.5 (left tread: 7/10/15 mm; right tread: 13/6/15 mm), Dutch registration = Further information = Axle configuration Tyre size: 385/65-R22.5 Axle manufacturer: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 45%; Tyre tread right: 80% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 40% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 95%; Tyre tread right: 95% Weights Unladen weight: 3,290 kg Payload: 35,710 kg Gross vehicle weight: 39,000 kg Functional Body make: BURG BPO 12-27 CCXAX Condition Technical condition: very good Visual condition: very good Identification Registration number: OH-34-FN Further information Please contact Arne Honingh for more information.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11311, workpiece weight (max.): 30 kg, type of input current: three-phase, input current: 12 A, input frequency: 50 Hz, input voltage: 400 V, rotor diameter: 1,000 mm, Balancing Machine, vertical shaft. Lhedpfx Aex H Aa Tekfof Measurement in two planes. Maximum rotor weight: 30 kg (tooling included). Automatic Indexing (rotor will, after measurement be positioned with correction location at the front). Rotor speed can be set for each programmable standard workpiece type. Some tooling is included. Machine is available because fans are no longer built by the customer.

Condition: good (used), Wire electrode, aluminum welding wire, aluminum welding rod made of aluminum-magnesium alloy Lsdpfjb A Ig Dox Akfehf -various manufacturers: -7x Elisental 1.2 mm SG-AlMg5 -1x MTC 1.0 mm AlMg5 -6x ALCAN 1.2 mm S-ALmg 5 -1x Thyssen 1.2 mm AlMg4.5Mn -Weight: 7 kg/roll Price: per piece

Condition: used, Year of construction: 2000, Manufacturer: Atoma Model: 823-C-400 Year: 2000   Number of weighing channels: 3 Maximum weight: 400 g Margin of error (e): 0.5 g   Feeding by hopper and vibrating lane. Conveyor belt Product stop by cell   Lhsdpfjx Rz Hgex Akfsf

Condition: used, CEM CEM Smart 5 Turbo Model 907990 Professional Microwave Moisture Analyzer for Moisture and Solids Analysis Reliable Laboratory Analytics in Record Time The CEM Smart 5 Turbo is a state-of-the-art microwave drying system for rapid and precise determination of moisture and solids content in a wide range of samples. Ideally suited for applications in the food, chemical, pharmaceutical, and environmental industries, this device saves significant time while maintaining consistently high measurement accuracy. Product features: Turbo technology with Intellitemp™ – Optimal temperature control prevents burning or crust formation on the sample. Lhodpfx Aowv Ryyskfof Fast analysis times – results within 60–180 seconds High precision – measurement range from 0.1% to 99.9% moisture or solids Versatile – suitable for solids, pastes, sludges, and liquids User-friendly touchscreen operation Interfaces – RS-232, USB, LIMS-compatible Typical applications: Cheese, dairy products, meat Paints, coatings, plastics, polymers Sludges, wastewater, organic residues Creams, pastes, emulsions Technical Data – CEM Smart 5 Turbo Feature Device type: Microwave moisture analyzer / moisture analyzer Technology: Microwave drying with Intellitemp™ temperature control Moisture range: 0.1% – 99.9% Sample types: solids, liquids, pastes, sludges, emulsions Analysis time: typically 1–3 minutes Drying method: direct microwave radiation (non-rotating) Temperature control: automatic (microwave-controlled, no fixed °C value) Weighing unit: Optionally connectable external scale (resolution up to 0.001 g possible) Display / Operation: color touchscreen, intuitive menu navigation Data interfaces: RS-232, USB, network (LIMS-compatible) Documentation: Barcode scanner & thermal printer (optional) Power supply: 230 V / 50–60 Hz Dimensions (W × D × H): approx. 41 × 44 × 37 cm Weight: approx. 18 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and information!) If you have further questions, we will gladly answer them by phone.

Condition: good (used), Sartorious Stainless platform scale / balance trolley Stainless mobile platform scale with a Mariotti & Pecini homogenisor attachment Lhsdpfx Aed Tw Ixekfef

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: CMT 30/STATIC, Non-rotating industrial balancer for grinding wheels, brake discs, fans, rims, etc. Automatic balancer for a wide range of applications. Lsdsw Hwlwopfx Akfjhf

Year of construction: 2004, condition: refurbished (used), MAREL PORTIO 4003 S ID.NO. 2179 Lhsdpfx Ashpz Euokfjf Marel TVM Portio 4003 S portioner for exact weight of meat details. Year of courage 2004 very little used since new! Dimensions 260 x 70 H 260 cm.

Condition: ready for operation (used), Dittel BM 2000 Balance - measuring device SN:239-5219, used, in good condition, 100% functional, scope of delivery as shown in the photos Ledpfx Aox Eq H Sjkfehf

Condition: ready for operation (used), Dittel BM 2000 Balance - measuring device SN:239-5209, the housing has a small dent on the right side, see photo, used, in good condition, 100% functional, delivery as per photos Lhedpfx Akox Eq Hxefjf

Condition: ready for operation (used), Dittel BM 2000 Balance - measuring device SN:239-5217, used, in good condition, fully functional, scope of delivery as per photos. Ljdpex Eq H Eofx Akfohf

Condition: ready for operation (used), Dittel BM 2000 Balance – Measuring device SN:239-5228, used, in good condition, fully functional, scope of delivery as per photos Ljdpfxox Eq Icj Akfshf

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, TECHNICAL DETAILS Maximum balancing weight: 2,000 kg Balancing body diameter without machining unit: 10 mm Bed length: 3,000 mm Swing diameter over machine bed: 2 mm Rotor shaft via belt drive: 10 mm Drive unit balancing speed (5 gears): Max. 80 / 160 / 290 / 470 / 630 rpm Measurement method: force measuring Electronics speed measurement range: 60 to 30,000 rpm Center height measured in bed: 1,200 mm Rollers: 2x 195 x 56 mm Axle spacing: 205 mm Adjustment travel: 3 mm vertical MACHINE DETAILS Drive power: 22 kW Compressed air: 6 bar Connected load: 25 kVA / 20 kW Machine weight: approx. 5,500 kg Machine dimensions approx. (L x W x H): 3.3 x 1.5 x 2.0 m Control cabinet dimensions: 6 x 610 x 21 mm Lodpfjw T Sqmox Akfshf EQUIPMENT - Measuring electronics PCX - Base frame (cast steel body) - Mounting length between bearing supports up to approx. 3,000 mm - Adjustment with hand ratchet via rack - Bearing supports/swing bearing blocks: 2 pieces

Condition: new, Balance Systems Digital Interface Balancer 9SHVM2512B N220 Card SNo. B803704, unused, 100% functional, scope of delivery as per photos Lhodji D T Dgepfx Akfsf

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. Ledpfxsx Ein Ss Akfjhf - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: used, functionality: fully functional, Ohaus ARC120 Adventurer Balance. Max cap: 3100g Lsdpfxeua H Nho Akfshf Readability: 0.01 g Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 5 kg, total width: 360 mm, total length: 700 mm, Universal dynamic balancer for rotors from 10g - 5kg Lhjdpfxeuh Svpe Akfsf

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 10 kg, input voltage: 230 V, year of last overhaul: 2023, SCHENCK Highspeed Special Balancing Machine Type 110 MBRS for turbocharger core assemblies a for service, repair shops as well as research and development departments. The correction of the static unbalance can be performed inside the balancing machine on the compressor wheel side directly on the machine. Max balancing speed 250,000 rpm Lhsdsq I Rz Rspfx Akfof

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 30 kg, input voltage: 400 V, rotor diameter: 600 mm, year of last overhaul: 2023, power: 1.1 kW (1.50 HP), Balancing machine upgraded in 2009. 1 Machine base, welded construction 1 Balancing unit Vertical, single plane, permanently calibrated, 1 special spindle with centric flange 1 piezo-electric vibration sensor 1 3-phase drive motor of 1.5 kW, driven by a belt 1 Protractor disk 300 mm diameter, with 360 °, mounted on the spindle 1 Safety guard For diameters up to 600 mm and heights of 420 mm 1 SCHENCK CAB 803 measuring device Lhsdpfx Aksq Umcrefof - With direct data entry system via touch screen - Industrial PC with active TFT color monitor - Visualization of results via vector meters - Network capability - Polish dialogue - Modular, easy-to-use system design - Optimized signal processing system via digital Schenck MMD filter - Intelligent, self-diagnosing measurement electronics system - Operation using standard Windows routines - Programs for: - Straight compensation, keyway, compensation index - Tolerance calculation according to ISO 1940 - Log report in PDF format Balancing speeds from 0 to 720 RPM - Smooth Max residual unbalance 5 - 10 gmm (DIN 1319)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 300 kg, total width: 1,260 mm, total length: 1,500 mm, Universal dynamic balancing machine for rotors from 3 - 300kg. CAB803 measuring system, class C protection, CE mark Lhjdpfsu Nmppsx Akfsf

Condition: excellent (used), Year of construction: 2014, workpiece weight (max.): 16 kg, input voltage: 230 V, year of last overhaul: 2025, SCHENCK TBsonio High Speed Balancing machine for turbocharger core assemblies Lhsdpfsq Nin Uox Akfjf

Condition: used, Microbalance, Laboratory Balance, Precision Balance, Analytical Balance, Scale, Micro Balance METTLER TOLEDO Model XS3DU S/N 1129453969 Part No. 18.11.2.1518.756-1 Year of Manufacture: 2008 Functions: Weighing, Statistics, Formulation, Density, Percentage Weighing, Piece Counting Maximum Capacity: 3.1 g Readability: 0.01 mg Taring Range: 0 … 3.1 g Maximum Capacity (Fine Range): 800 mg Readability (Fine Range): 0.001 mg Repeatability (at nominal load): 6 μg (3 g) Repeatability (fine range at nominal load): 0.8 μg (0.2 g) Linearity Deviation: 10 μg (0.5 g) Corner Load Deviation (test load): 4 μg (1 g) Sensitivity Deviation (test weight): 45 μg (3 g) Temperature Drift of Sensitivity: 0.0001 %/°C Sensitivity Stability: 0.0001 %/a Repeatability (low load): 3 μg (0.2 g) Repeatability, fine range (low load): 0.5 μg (0.2 g) Lhsdpfx Akswrtbxefef Linearity Deviation: 3 μg (3 g) Corner Load Deviation (test load): 1.2 μg Sensitivity Deviation (test weight): 9 μg (3 g) Minimum Sample Weight (USP): 6 mg Minimum Sample Weight (USP) fine range: 1 mg Minimum Sample Weight (U = 1%, k = 2): 0.6 mg Minimum Sample Weight (U = 1%, k = 2) fine range: 0.1 mg Stabilization Time: 6 s Stabilization Time (fine range): 10 s Interface Update Rate: 23 1/s Draft Shield Diameter: 68 mm Draft Shield Usable Height: 55 mm Weigh Pan Diameter: 25 mm - LCD Touchscreen - RS232C Interface - Printer Type RS-P42 - Tare Function Power Supply: Primary 100 – 240 V AC, 50/60 Hz; Secondary 12 V DC, 2.5 A Terminal/Display Unit Dimensions (L x W x H): 285 x 195 x 80 mm Weighing Cell Dimensions (L x W x H): 288 x 128 x 114 mm Printer Dimensions (L x W x H): 210 x 150 x 90 mm Total Weight: approx. 7 kg Good condition

Condition: used, Year of construction: 1982, workpiece weight 60 kg workpiece length 700 mm diameter 500 mm total power requirement kW weight of the machine ca. t Lhjdpfx Ajt Hxbqokfsf dimensions of the machine ca. m

Condition: used, This listing is for the Sartorius Tare CP4202S Top Loading Balance + Printer Ledoygmikspfx Akfehf The unit is in full working condition and is ready for immediate use The Sartorius Tare CP4202S is a high-precision top loading balance designed for routine laboratory weighing applications. Known for its reliability and durability, it delivers accurate and repeatable results, making it ideal for research, quality control, and industrial labs. The balance features fast stabilization time, intuitive operation, and a robust construction suited for daily use. With Sartorius’ trusted weighing technology, the CP4202S ensures consistent performance, ease of calibration, and dependable results for a wide range of weighing tasks.

Condition: not inspected (used), Item: D-10737-Auger Bulk Feeder Lhodpohn S Efjfx Akfsf Stainless Steel Bulk Feeder with weight Stainless Steel auger Ø6" (150 mm). Dimension: Bulk L 980 mm X W 980 mm x H 700 mm Auger: Max H 2400 mm Discharge 1900 mm Opening at bulk top: 700 x 700 mm One side at wheels