Used Wheel Balancing Machine for sale (80,936)

Condition: used, Technical details: grinding wheel weight max.: 100 grinding wheel diameter: 650 mm dimensions of the machine ca.: 1,5 x 0,8 m max. weight of wheel: 100 kg Balancing machine for Reishauer grinding worms with flanges Lrsdpfx Aisya Rhqo Her *

Condition: used, Reading type / 0 Lodpfx Aisy Sur Eo Hsrr weight - pallet system / kg length / mm

Year of construction: 2010, condition: used, Technical details: range of revolution per miute: 180 U/min voltage: 220/ 50 V/Hz machine weight approx.: 150 kg dimension machine xH: 1,2 x 0,8 x 1,3 m Ljdpfxsu Ic Aie Ai Horr total power requirement: 550 kW Car tire balancing machine The balancing process is automatic with wheel braking. Program selection can be chosen between 11 balancing methods. Microprocessor controlled LED display with digital weight display. Center hole of rim Ø 40 - 154mm Shafts Ø 36mm Measuring speed 120 rpm. Measuring time 5 - 10 sec. Cone sizes: Ø 44 - 63mm; Ø 61 - 79mm; Ø 77 - 114mm; Ø 107 - 154mm Wheel dimension: Rim width: 1,5" - 18" RimØ max. 10" - 24" Wheel Ø max. 890mm Wheel weight max. 65kg *

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. Lsdpfx Aisq Nf S Re Hjrr 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH bucket-type sand washers are designed to effectively separate clay, dust, and foreign matter from aggregate materials, thereby improving material quality. Their durable construction and simple design ensure both long-lasting use and easy maintenance. The bucket system consumes minimal energy while washing the material through water circulation and significantly reduces water consumption. This provides an environmentally friendly solution and lowers operating costs. Standing out for their ease of installation and use, CONSTMACH bucket (Wheeled) sand washers are an ideal choice for improving aggregate quality in stationary or mobile crushing and screening plants. CBW-80 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 5.5 kW Capacity: 80 – 90 m³/hour Bucket Size: 800 x 550 mm Rotation Speed: 2.5 rpm Ljdpfxjxpyfvs Ai Horr Wheel Diameter: 3,000 mm Number of Buckets: 40 CBW-100 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 7.5 kW Capacity: 110 – 120 m³/hour Bucket Size: 1,000 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 Why Choose CONSTMACH Bucket Washers? CONSTMACH is a leading brand offering reliable, efficient, and long-lasting solutions in the stone crushing and screening industry. Manufactured to high engineering standards, our bucket (Wheeled) sand washer models stand out with their minimal maintenance requirements, low operating costs, and high performance. Our professional approach to spare parts supply, technical support, and after-sales service ensures maximum efficiency for our users. By choosing CONSTMACH bucket washers, you can increase quality in your production processes and gain a sustainable production advantage by saving energy and water. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting use.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH bucket-type sand washers are designed to effectively separate clay, dust, and foreign matter from aggregate materials, thereby improving material quality. Their durable construction and simple design ensure both long-lasting use and easy maintenance. The bucket system consumes minimal energy while washing the material through water circulation and significantly reduces water consumption. This provides an environmentally friendly solution and lowers operating costs. Standing out for their ease of installation and use, CONSTMACH bucket (Wheeled) sand washers are an ideal choice for improving aggregate quality in stationary or mobile crushing and screening plants. CBW-80 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 5.5 kW Capacity: 80 – 90 m³/hour Bucket Size: 800 x 550 mm Lrodpfx Aiexp Urwj Hsr Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 CBW-100 Bucket (Wheeled) Sand Washer Technical Specifications Motor Power: 7.5 kW Capacity: 110 – 120 m³/hour Bucket Size: 1,000 x 550 mm Rotation Speed: 2.5 rpm Wheel Diameter: 3,000 mm Number of Buckets: 40 Why Choose CONSTMACH Bucket Washers? CONSTMACH is a leading brand offering reliable, efficient, and long-lasting solutions in the stone crushing and screening industry. Manufactured to high engineering standards, our bucket (Wheeled) sand washer models stand out with their minimal maintenance requirements, low operating costs, and high performance. Our professional approach to spare parts supply, technical support, and after-sales service ensures maximum efficiency for our users. By choosing CONSTMACH bucket washers, you can increase quality in your production processes and gain a sustainable production advantage by saving energy and water. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting use.

Condition: good (used), Year of construction: 1993, with oil filtration unit Unfortunately, we do not have any further technical data available. Transport and loading can be organised throughout Europe at an additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Machinery Purchasing / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your manufacturing shop? Or are you looking to sell your equipment? For further information or contact options, please use the contact form. Ljdozvfdkepfx Ai Hsrr

Condition: used, Year of construction: 1990, Technical details: balancing body max.: 7000 kg balancing body diameter w/o machining unit: 1870 mm balancing body diameter with machining unit: 1870 mnm distance between bearing centers: min. 200 mm rotation weight: 7000 kg Rotor-Ø: 1870 mm Bearing journal Ø: 40 - 180mm mm control: CAB 690 voltage: 380 V /50Hz V/Hz Rotor weight: 40–7,000 kg Machine overload capacity with symmetrical loading: up to 9,000 kg, i.e. max. 4,500 kg per bearing pedestal 1 × machine bed, divisible: 3.85 m + 2.0 m Ledozuyd Nspfx Ai Hsrr *

Condition: ready for operation (used), Year of construction: 2007, Available immediately ex-works: CNC vertical balancing machine TIRA Type KV 10 Year of manufacture 2007 Lrsdpfx Ajzvv R Ioi Hjr Rotor mass 1 – 10 kg Rotor height up to 400 mm Rotor diameter up to 400 mm Max. balancing speed up to 2000 rpm Max. display sensitivity (gmm) 0.5 Drive power 2.2 kW Weight 1500 kg Price: EUR 3,000.00 + VAT, ex-works

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg Lrsdex Ein Sepfx Ai Her - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: good (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: AHG0482, workpiece weight (max.): 7,000 kg, total width: 2,400 mm, total length: 5,100 mm, total height: 2,000 mm, input voltage: 400 V, rotor diameter: 1,600 mm, year of last overhaul: 2026, The testing machine is currently in operation. Due to a relocation of operations, it can be dismantled in February 2027. The drive has been converted to direct current. We use the system as follows: Lsdpfszu Rguox Ai Hjrr up to 7000 kg, up to 700 rpm up to 2500 kg, up to 1500 rpm up to 1500 kg, up to 3000 rpm up to 250 kg, up to 4200 rpm The system can be inspected in Neusäß by prior arrangement.

Condition: reconditioned (used), functionality: fully functional, We offer refurbished turbines from a continuous blasting machine – Rösler RRB 22/5-L. Turbine type: Hurricane H42. The stated price is for 1 unit. Lsdpfxeztp Ale Ai Horr Turbines are refurbished using original spare parts made of tool steel. Blasting machine, blasting nozzle, blasting and sanding, sandblasting, blasting, shot blasting turbine.

Condition: excellent (used), Year of construction: 2012, operating hours: 1,800 h, functionality: fully functional, workpiece weight (max.): 20,000 kg, total width: 3,000 mm, total length: 9,000 mm, total height: 3,000 mm, type of input current: DC, SCHENCK, HM60U, max diameter 3000mm, max weight of rotor 20.000 kg, New measuring unit CAB920 SmartTouch (2025) SCHENCK, Protection enclosure included, CE sign, calibration certificate February 2026, drive 75kW drive with high speed gear box 3 shifts, pair of roller bearing for journal dia. 50 - 200 mm, pair of roller bearing for journal dia. 200 - 400 mm, lubrification system for roller carriages Ljdpfx Asylin Hei Hjrr

Year of construction: 2007, condition: ready for operation (used), A CNC precision grinding machine Peter Wolters with two opposing grinding wheels and a workpiece/carrier disc system for simultaneous machining of both workpiece sides is available. Carrier wheel outer diameter: 1050mm, carrier wheel ring diameter: 290mm, max. workpiece height: 100mm, machine dimensions X/Y/Z: approx. 2350mm/3400mm/2400mm, weight: approx. 7000kg, control: Siemens Simatic S7-400 with WinCC visualization, operating hours: approx. 7000h. Including twin loader, buffer table, CBN fine grinding wheels, dressing wheels, ultra-fine measuring system, temperature monitoring, remote maintenance system, wear compensation and alignment system. Without filter system and cooling system. Documentation available. An on-site inspection is possible. Ledpfx Aiey R Drlj Hsrr

Year of construction: 2013, condition: ready for operation (used), Effective diameter: 1000mm, effective height: 450mm, max. load: 900kg, connected load: 7.34kW, turbine power: 5.5kW, impeller diameter: 334mm, throwing blades: 6, discharge speed: 30m/s-70m/s. Machine dimensions X/Y/Z: approx. 3000mm/3000mm/3500mm, weight: approx. 2050kg, operating hours: 2559h. Documentation available. On-site inspection is possible. Ljdsvdu N Nepfx Ai Horr

Year of construction: 1987, condition: good (used), functionality: fully functional, machine/vehicle number: RMUW2258, Horizontal balancing machine, manufacturer: SCHENK, type: H30, year of manufacture: 1987, serial number: AHE1070, rotor weight: 3-320 kg, rotor diameter: max. 1,260 mm, journal diameter: 10-160 mm, speed infinitely adjustable. Ljdpfxjy S Tyno Ai Hjrr Control system: CAB 820, year of manufacture: 2021, serial number: RMUW2258.

Year of construction: 2007, condition: used, functionality: fully functional, machine/vehicle number: 420, The washing machine can be inspected while running. It does require some maintenance, but all small parts can still be obtained from the manufacturer. Lredezup Hajpfx Ai Her

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. Ljdpfxst Hw N Ho Ai Herr * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Lodpfxexq Hkuj Ai Hsrr Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Control Siemens 840D work piece width min. 5 / max. 180 mm max. workpiece diameter 200 mm weight of the machine ca. 15,0 t dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m In our opinion, the machine is in good used condition. The machines were used for the production of connecting rods. Two machines are available. Lsdpfx Aiexq R Has Herr One machine is suitable for pre-grinding and one for regrinding. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1963, balancing body min/max. 30 - 5000 kg Ljdpfxozkbqpe Ai Hjrr balancing body diameter with machining unit 2100 distance of bearings kleinster 240 mm dia. axle journal 35 - 180 mm weight of the machine ca. 400 KG

Year of construction: 1989, condition: used, functionality: fully functional, Lot of 13 used machine tools: Lathes, milling machines, radial drill, grinding machine, grinding wheel. TRANSPORT TO BE AGREED UPON DURING PURCHASE OR QUOTATION: - MT180 TRIFASE Lathe - INGERS 175 three-phase Lathe - LEGOR 300 three-phase - ANSELMI 180 three-phase Lathe Lrodpfxezg E Hyo Ai Hor - Idroming 600 (DRM) - Grinding machine - BERGONZI FS 870 Radial drill - FRESA Prvomajska 1 - FRESA Prvomajska 2 - SERRMAC RAG 25/L three-phase pillar drill - ITALERI three-phase pillar drill - BIMARK MOD. 30 three-phase pillar drill - Fratelli Rosa Milano three-phase pillar drill - Salmoiraghi three-phase grinding wheel Technical details for each machine are shown in the photos. Transport costs to be determined during the quotation process. For any further information, please do not hesitate to contact us. Machines intended for countries outside the EU. ----- Price: 12,900 EUR, VAT excluded + TRANSPORT COSTS TO BE BORNE BY THE PURCHASER -----

Year of construction: 2023, condition: ready for operation (used), WHEEL CUTTING MACHINE FOR PALLET BLOCKS. MACHINE WORKING ON OCCASION. MINIMUM 50X50mm Lrodpfx Ajk Nf S Roi Her MAXIMUM 150X150mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 250003, overall weight: 780 kg, input voltage: 230 V, input current: 4 A, type of input current: AC, Equipment: documentation/manual, Wheel truing machine robot OT (external truing technology), centering robot with external centering. Nipple wrench, 5.5 mm hexagonal/3.2 mm square. Holder for spoke nipples. Lrsdpfx Aiozl U Aze Her Approx. 10 m of wheel feed rails.

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Ledpfx Aijxuv Udo Hjrr Changes and errors in the technical data and information as well as Subject to prior sale!