Used Weiler E 70 for sale (203)

Condition: excellent (used), Year of construction: 1992, Weiler Condor 81 Weiler Condor 81 lathe with Heidenhain digital display, year of manufacture 1992, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Year of manufacture: 2003 Engine lathe WEILER type Condor 81 Distance between centers: 750 mm Swing over bed: 330 mm Center height over bed: 165 mm Swing over cross slide: 180 mm Center height over cross slide: 90 mm Spindle bore: 40 mm Chuck fitting: short taper DIN 55027 size 5 Tailstock quill taper: MK 3 Quill travel: 110 mm Spindle speed: 45 – 2800 rpm, 16 steps Drive power: 3 kW Power supply: 400 Volt, 50 Hz Rsdpfxjw T U Sgs Aabsch Spindle speeds via 16-speed gearbox Required space (L x W x H): 1850 x 950 x 1400 mm Weight: 1,100 kg Accessories and equipment: Röhm 3-jaw chuck Multifix quick-change toolpost Coolant installation Heidenhain digital readout About the machine: We offer a Weiler Condor 81 lathe with Heidenhain digital display, year 1992, in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs very quietly. This newer generation of lathes is very user-friendly and can achieve ground-like finishes. Take the opportunity to inspect this machine under power at our location and see its condition for yourself. You can find more lathes from renowned manufacturers on our website.

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Rcjdoxp Rvljpfx Aabjh

Condition: good (used), Year of construction: 2008, Weiler DZ 40, year of manufacture 2008, Siemens 840 D control, travel X/Z 200/350 mm, Y axis +/- 25 mm, tailstock MK 4, main spindle max. bar capacity 42 mm, spindle bore 52 mm, rapid traverse X/Z/Q 30/30/20 m/min, 16-position turret – all stations driven, shank diameter 25 mm, driven tools up to 4,500 rpm, parts tray, accessories, driven toolholders, rigid holders. Rjdpfx Aasxnna Seboch

Condition: used, Year of construction: 1984, - K+C 3-axis position indicator - Bison 3204-160 3-jaw lathe chuck - Collet chuck + various collets - Chuck guard - Multifix - Coolant system - Chip deflector - Full service completed (oil change, belt change, etc.) - Year of manufacture 1984 Specifications - Swing over bed: 330 mm - Swing over cross slide: 185 mm - Turning length between centers: 750 mm - Turning length between centers with covered lead screw and feed screw: 650 mm - Center height: 165 mm - Bed width: 240 mm Lathe spindle: - Spindle head DIN 55027: Size 5 - or similar DIN 55029 (Camlock D1): Size 4 - Spindle diameter in front bearing: 70 mm Rcsdpfx Aaev U Dlzobeh - Spindle bore: 40 mm - Internal taper according to DIN 228: MT5 - Centering point according to DIN 806: MT3 - Maximum faceplate diameter: 280 mm - Standard chuck diameter: 160 mm - Maximum chuck diameter: 200 mm Tool slide: - Guide length of the bed slide: 365 mm - Cross slide travel: 175 mm - Cross slide spindle pitch: 3 mm - Cross slide width: 140 mm - Top slide travel: 140 mm - Top slide spindle pitch: 3 mm Tailstock: - Quill stroke: 110 mm - Quill diameter: 50 mm - Taper DIN 228: MT3 Spindle speeds: - Number: 16 / 32 - Range: 45-2800 / 22-2800 rpm Feeds: - Number: 120 - Standard longitudinal range over gears, metric/inch: 0.016 - 0.25 mm/rev - Standard longitudinal range over timing belts, metric/inch: 0.022 - 0.5 mm/rev - Steep longitudinal range over gears, metric/inch: 0.125 - 2 mm/rev - Steep longitudinal range over timing belts, metric/inch: 0.045 - 4 mm/rev - Face feeds: 0.3733 x longitudinal feed Thread pitches: - Standard metric: 0.18 - 28 mm - Standard inch: 80 - 1 1/2 thread - Module: 0.1 - 9 mm - Diametrical pitch: 200 - 2 3/4 thread - High-helix thread device: 8-axis - Lead screw pitch: 6 mm / 4 threads/in Workpiece weights: - Between centers without steady rests: 160 kg - Between centers with steady rests: 50 kg - Maximum workpiece weight (incl. clamping device): 125 kg Electrical specifications: - Motor power: 3 kW - Motor rated current: 7.1 A - Operating voltage: 400 V - Control voltage: 42 V Space requirements and weights: - Dimensions W x H x D: 1832 x 1290 x 880 mm - Turning spindle above floor: 1150 mm - Weight: approx. 1020 kg

Condition: like new (used), Weiler Optimum Excellent condition Incl. tooling Rcsdpfx Ajxqacksabsh

Year of construction: 2007, condition: ready for operation (used), Swing diameter over bed/cross slide: 1100mm/730mm, turning diameter: 1130mm, spindle bore: 128mm, rapid traverse: 5m/min, quill diameter: 140mm, quill stroke: 300mm, center height: 550mm, distance between centers: 3000mm, max. workpiece weight: 6000kg. Machine dimensions X/Y/Z: approx. 6700mm/2600mm/2300mm, weight: approx. 10500kg, control: Siemens, operating hours: 67647h. Documentation available. An on-site inspection is possible. Expected to be available from 2026. Rcedpfx Aajxph N Njbjh

Condition: like new (used), Year of construction: 1992, Lathe WEILER Precision center lathe in ergonomic design The Weiler Ergodor is the first German ergonomically designed lathe. It creates a more humane workplace and prevents health problems. The key feature is that the employee can operate this lathe while standing or sitting. Technical data Center width 470 mm Turning length 430 mm Center height 145 mm Rotation Ø over cross slide 160 mm Rotation Ø over bed 300 mm Rsdpfx Aaevgqu Hebech Spindle head, short taper flange Bayonet mounting DIN 55022 size 5 or Camlock clamping D 1-ASA-4 Spindle bore 36 mm DIN 55022 size 5 Spindle inner taper Spindle speeds Speeds 30 - 3550 rpm S Speeds 15 - 3550 rpm Brake motor 3 kW Brake motor 1.5/3 kW Face slide travel 150 mm Travel of the top slide 100 mm Feed rates and thread pitches on the gearbox switchable steps 30 Section 2 1.5/3 kW 38 Gear ratio in headstock 3 20 Long feeds 150 mm via change gears 100 mm via toothed belt Face feeds = 1/2 Longitudinal feed values Metric pitches 0.2 - 12 mm Module pitches 0.1 - 4 Dimensions 1450 x 640 x 1500 mm Dimensions 1450 x 640 x 1500 mm Net weight 1000 kg Acceptance according to toolmaker's accuracy DIN 8605 20 Built according to the rules of occupational safety, official test no. A. EM 11 1545/80. Encombrement 1450 x 640 x 1500 mm

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Rodoxp Ru Uopfx Aabsch

Condition: good (used), Year of construction: 2000, Weiler Primus VC, Year of manufacture 2000, Digital display, Center distance 500 mm, Rodov Ifxiepfx Aabjch Max. turning diameter over slide 150 mm, Spindle speed up to 4,000 rpm, Spindle bore 40 mm, Spindle drive 1.5 KW, Multifix tool holder, 24 longitudinal feeds, Metric thread, Inch thread,

Condition: used, Year of construction: 1986, Technical details: turning diameter over bed: 320 mm turning diameter over slide rest: 198 mm turning length: 650 mm total power requirement: 2,2 kW weight of the machine ca.: 650 kg dimensions of the machine ca.: 1700x1000x1700 mm : 3 - Achs Heidenhain ND 780 : Ø 40 mm : 96 - 2500 1/min : A 2 - 5 : 0,007 - 0,63 mm/1 : metrisch 0,25 - 8 mm,Zoll 80 - 2 Gg/",Diametral - Pitch Gewinde 200 - 5 Dp,Modul 0,2 - 4 : MK 3 3-jaw chuck: 160 mm Accerories Rcedpfx Ajwt Auweabjh Technical equipment Typ B

Condition: ready for operation (used), WEILER COMMODOR 230 / Heidenhain digital readout Machine originates from an educational institution - CS identifier - Centre height: 230 mm - Distance between centres: 1000 mm - Swing over bed: 475 mm - Swing over cross slide: 270 mm - Bar capacity: 56 mm - Spindle speed range: 25-2000 rpm - Automatic longitudinal/cross feeds - Thread cutting / metric / imperial etc. - Tailstock: Morse taper 4 - 3-jaw chuck: 200 mm Rcedoxpilfjpfx Aabsh - Quick-change toolpost with inserts - Coolant system - Chuck guard - Chip backsplash - Work lamp - Emergency stop - Machine feet - Documentation Dimensions: LxWxH 2.5 x 1.5 x 1.7 meters / Weight: 1800 kg Subject to errors and omissions

Condition: like new (used), Year of construction: 1997, functionality: fully functional, Weiler Commodor 230 Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEW Excellent Original Condition CE !!! Technical Data: Redpfx Aoxfu Spjaboch >> Year of manufacture: 1997 Machine no. 330 >> Centre height: 230 mm >> Centre distance: 1,000 mm >> Spindle speeds: from 13 to 2,000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55027, size 6 with bayonet lock >> Tailstock: Morse taper 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.35 to 12 mm >> Weight: approx. 2,000 kg >> Spindle brake engageable >> Drive power: 7.5 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1.0 m Accessories and Equipment: >> 3-axis digital readout from K&C, brand new, 12-month manufacturer's warranty with user manual Functions: mm/inch switch-over, coordinate selection ABS/INC, value halving, reference mark, 200-tool memory, taper calculation, radius/diameter, quick zeroing, counting direction toggle >> 3-jaw chuck NEW 200 mm, 2 sets of jaws >> Multifix size B with 3 tool holders >> Bed stop >> Fixed steady rest >> Machine lamp >> Coolant system About the machine: For sale is a Weiler Commodor 230 lathe in excellent original condition with CE conformity. The Commodor 230 is one of the largest manual lathes manufactured by Weiler—a very robust and high-performance machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected in our workshop. A full oil change has been carried out. This newer generation of Weiler lathes is particularly user-friendly. You are welcome to view and test the machine under power at our premises.

Condition: used, turning diameter over bed 260 mm turning diameter over slide rest 140 mm turning length 500 mm centre height 125 mm bed width 160 mm spindle turning speed range 16: 110-3600 U/min spindle bore 28 mm face slide travel 120 mm upper slide-adjustment 120 mm tailstock quill taper MT 2 tailstock quill adjustment 80 mm Rsdpevtthijfx Aaboch drive motor 0,37 / 0,88 kW weight of the machine ca. 350 kg dimensions of the machine ca. 1,3 x 0,6 x 1,2 m Mechanic's lathe with manual feed and spindle support, drive via V-belt and stepped pulleys as well as 2-pole motor, hardened, finely ground work spindle, support adjustment over the entire bed length using eccentric clamping lever, three-jaw chuck, collet device with pliers, crank tailstock, cast base. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, spindle bore: 83 mm, turning length: 1,000 mm, turning diameter: 570 mm, turning diameter over top slide: 340 mm, quill diameter: 80 mm, quill travel distance: 200 mm, overall weight: 3,200 kg, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, The machine is in very good condition. Immediately available! Rcedpfewxw S Ijx Aabeh Can be tested under power.

Condition: good (used), used -- 6-fold changer for WEILER , type 260 Rcjdpexdixnofx Aaboh

Condition: used, Technical details: turning diameter over bed: 570 mm turning diameter over support: 340 mm turning length: 1000 mm switched on hours: 37917 h centre distance: 1000 mm swing diameter over bed: 570 mm swing diameter over face slide: 340 mm centre height: 280 mm spindle bore: Ø 66 mm revolution per minute: 1 - 625 steples U/min max. torque on the spindle: 1600 Nm longitudinal feeds:: 0 - 20 mm/U cross feed: 0 - 20 mm/U tailstock quill adjustment:: 160 mm tailstock quill: MK 5 mm total power requirement: 20 kW Rcsdexg Nhnjpfx Aabsh weight of the machine ca.: 3,2 t dimension machine xH: 2,9 x 2,28 x 1,8 m Machine has been overhauled/refurbished: Ball screw Z overhauled, X-axis end position overhauled, new paint job. Conventional design with integrated automatic cycle control. Metric thread cutting, inch threads, DP threads. Chip conveyor not available. 4-jaw chuck with steady rest available. 3-jaw chuck mounted. *

Condition: good (used), Year of construction: 2012, functionality: fully functional, Weiler Praktikant VC precision lathe Manufacturer: Weiler Type: Weiler Praktikant VC precision lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical details Turning diameter: 250 mm Turning length: 650 mm Center height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power output – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: Rcsdpfxexd Tkno Aabjh System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Module: 0.25 – 4 mm Travel distances: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel movement: 180 ° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirements: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC precision lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Condition: excellent (used), Parallel Lathe WEILER type PRIMUS Between points: 400 mm Maxi Ø on bench: 250 mm Redpoxnp I Defx Aabjch Maxi Ø over saddle: 130 mm Spindle Ø 24 mm Turret Multifix type A 3-jaws chuck Ø 155 mm Threadings Metric + Whitworth Tailstock CM2 Scale HEIDENHAIN ND522 Feeds: auto 2 axes New electrical panel Delivered with: 1 4-jaws chuck Ø 155 mm, 4 tool holders, 1 drill chuck Voltage: 380 V Dimensions (L x W x H): 1300 x 900 x 1900 mm Weight: approx 500 kg Machine in VERY GOOD CONDITION

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Commodor 230 Lead and Feed Spindle Lathe with 3-Axis Digital Readout K&C NEW Excellent Condition Rcjdpfxoxdi She Aabjh Technical Data: - Year of manufacture: 1992, Machine No. 239 - Centre height: 230 mm - Centre distance: 1000 mm - Spindle speeds: from 13 to 2000 rpm - Spindle bore: 56 mm - Short-taper spindle nose DIN 55027 size 6 with bayonet lock - Tailstock: MT 4 - Feeds from 0.026 to 0.888 mm/rev - Possible threads: Metric, Inch, Module, and Diametral Pitch - Metric thread pitches from 0.35 to 12 mm - Weight approx. 2000 kg - Spindle brake engageable - Drive power: 7.5 kW - Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: - 3-axis digital readout by K&C, new, 12 months manufacturer warranty with user manual Functions: mm/inch toggle, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, rapid zeroing, counting direction selection - NEW 200 mm 3-jaw chuck, 2 sets of jaws - Multifix size B with 2 tool holders - Bed stop - Machine lamp - Coolant system About the Machine: Offered is a Weiler Commodor 230 lathe in excellent condition. The Commodor 230 is one of the largest manual lathes manufactured by Weiler—a very robust and powerful machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically tested by us and a complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test the machine under power at our location.

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Rcodpfxjrtd Uwo Aabeh Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 570 mm turning diameter over support: 340 mm turning length: 1.000 mm swing diameter over bed: 570 mm centre height: 280 mm Rcodpfx Aaowtc T Tjbsh centre distance: 1000 mm switched on hours: 26668 h spindle bore: Ø 66 mm revolution per minute: 1 - 2.500 U/min max. torque on the spindle: 1.200 Nm longitudinal feeds:: 0-20 mm/U cross feed: 0-20 mm/U diameter of quill: MK5 Taper tailstock quill adjustment:: 200 mm total power requirement: 30 kW weight of the machine ca.: 3,2 t dimension machine xH: 2,85x2,29x1,9 m Cycle controlle lathe equipment: -revolving tip (quill) -chip conveyor -cooling water unit manufactor Mayfran *

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Weiler Praktikant VC precision lathe Manufacturer: Weiler Type: Weiler Praktikant VC precision lathe Rjdjxd Tkbspfx Aaboch Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical details Turning diameter: 250 mm Turning length: 650 mm Center height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power output – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Module: 0.25 – 4 mm Travel distances: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel movement: 180 ° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirements: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC precision lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Weiler precision lathe model Condor B, lead and feed screw lathe with brand new K&C 3-axis digital readout, CE compliant! Rcodpfxexcuazj Aabsh Technical data: >> Machine No. 2442, year of manufacture 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake, selectable >> Length: 1.83 m, height: 1.29 m, depth: 0.88 m Equipment and features: >> New K&C 3-axis digital readout, 12-month manufacturer's warranty, supplied with operating manual Features: mm/inch switching, selectable ABS/INC coordinates, value halving function, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 x brand new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 x 200 mm 4-jaw chuck with 1 set of jaws >> New collet chuck system and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Machine feet Safety features: electronic spindle guard, 2 emergency stop buttons, changewheel box with safety interlock, spindle brake About the machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes work easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Weiler C30 x 750 precision lathe (2007) Manufacturer: Weiler Type: C30 x 750 Year of manufacture: 2007 Availability: several machines available Condition: very good, used, from training workshop, last maintenance 09/2024 Center width 750mm Circulation diameter over bed 330mm Rotation diameter facing slide 160mm Movement of facing slide 180mm Bed width 240mm Turning tool cross-section 20 x 20mm Spindle head according to DIN 55027 size 5 Spindle diameter in front bearing 70mm Spindle bore 40.5mm Inner taper of the main spindle 5mm Drive power 60 %/100 % ED 9/7KW Total speed range 1 - 4,500 rpm Feed force longitudinal 6,000N Planar feed force 3,000N Feed range 0.001 - 10 mm/rev Rapid traverse speed longitudinal/plane 6/3 m/min Metric threads 0.1 - 400mm Inch thread 56 - 1/4 G/inch Module thread 0.125 - 28mm DP thread 224 - 1 Dp Max. Threads 99 Quill diameter 50mm Quill stroke 130mm Inner taper of quill MK3 Length 1750mm Width 1350mm height 1670mm Weight 1300kg Scope of delivery Rota S Plus 200-52 jaw chuck Multifix Machine light Coolant system Machine feet Original documentation Weiler maintenance log 09/2024 Rcedpfexd Tiwjx Aabjh

Condition: ready for operation (used), Year of construction: 2003, Weiler E50 x 1000 precision lathe (2003) Manufacturer: Weiler Type: E50 x 1000 Year of manufacture: 2003 Condition: good, used, under power Operating hours: 43.000h Technical data see pictures. Included in delivery: - Original documentation - Rota S Plus 250-62 - Bezel - Parat 4 compartment tool turret Rcjdpfxexd Tikj Aabeh