Used Weiler Lzd 220 for sale (198)

Condition: used, Year of construction: 1981, machine/vehicle number: 283, Item No. 26208 Chsdszyl H Hspfx Acgjd Technical Data: - Maximum turning height 120 mm - Maximum turning diameter 450 mm - Maximum swing over bed 250 mm - Spindle bore 23 mm - Spindle mounting with threaded nose DIN 55027 - Taper of tailstock spindle MK 2 - 20 spindle speeds 60 - 3000 rpm - Feeds - longitudinal 0.03 - 3.0 mm - transverse 0.015 - 0.150 mm - Thread pitches 0.25 - 5 mm - Drive 400 V / 1.1 / 1.5 kW - Footprint approx. approx. W 1200 x H 1250 x D 650 mm - Weight approx. approx. 700 kg - Including: - 3-jaw chuck - Quick-change tool holder - Rotating center - Separate tool cabinet with various accessories

Condition: used, L + Z lathe WEILER, type LZ PRIMUS GS Machine no. 1984, year of manufacture 1981 Distance between centers 400 mm Turning diameter over bed 250 mm Height of centers over bed 125 mm Turning diameter over carriage 140 mm Height of centers over carriage 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm, 18 steps Feed in longitudinal and facing directions Chuck flange, short taper DIN 55022, size 4 Tailstock internal taper MK 2 Cedez N H Dqepfx Acgehd Drive power 1.1 kW and 1.5 kW, pole-reversing Power supply 380 volts, 50 Hz - Spindle speed controlled via 2 motor speeds and 9 gear stages - 3-jaw chuck WEILER, Ø 125 mm, with soft jaws - Quick-change tool holder MULTIFIX with 2 interchangeable cassettes - Coolant system - Collet set Ø 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 14 / 15 / 16 / 18 / 20 mm - 1 centering point for collet chuck - Turning center flange - Emergency stop - Folding chuck guard with electrical monitoring - Splash guard Space requirement L x W x H 1200 x 650 x 1380 mm Weight 325 kg Good condition

Condition: good (used), Year of construction: 1989, 1 used lathe with lead screw and feed spindle Manufacturer: Weiler Type: Condor B Year of manufacture: 1989 Serial number: 89-1314 Technical data: Center distance: 750 mm Center height: 165 mm Spindle bore: 40 mm Speed: 22 – 2800 rpm Tailstock: MK 3 Drive power: 1.6 / 3.2 kW Weight: 1040 kg Dimensions: 1,850 x 880 x 1,290 mm Equipped with: 3-axis digital display Lever collet chuck Chodpfx Acjz Adv Eegod Chuck guard

Condition: used, Max. turning length: approx. 800 mm, center height: approx. 150 mm, hollow spindle diameter: approx. 50 mm, with 3-axis digital display, manufacturer: ELESTA, type: VISULESTAIIE, with Multifix steel tool holder, magnetic chuck, coolant system, splash guard, and machine light, as well as various machine accessories. Chedpfx Acsz Nhpbjgsd

Condition: good (used), Year of construction: 1991, functionality: fully functional, Weiler Praktikant 160 B, Year of manufacture: 1991, 3-axis digital display, Maximum turning diameter: 160 mm, Codpezg Hvvofx Acgohd Distance between centers: 650 mm, Spindle speed up to 2,500 rpm, Tailstock, Collet set, Chuck, 2 tool holders.

Condition: good (used), Year of construction: 1991, Machine type Lathe - cycle-controlled Manufacturer WEILER Type E30 year of construction 1991 Control Weiler Country of origin Germany Additional information Cycle-controlled lathe WEILER - E30 Technical details Turning diameter max. 330 mm Turning length 750 mm Weiler control Center height 165 mm Swing diameter over bed 330 mm Max. turning diameter over facing slide 160 mm Face slide travel 180 mm Longitudinal bed slide travel 395 mm Main spindle: Speed range - main spindle 1 - 4,500 min/-1 Drive power - main spindle 9 / 11 kW Max. Torque 165 Nm Spindle head DIN 55027 / 5 Spindle diameter in front bearing 70 mm Spindle bore 40 mm Usable bar diameter ( - ) mm Chodpfx Asr Dvqzscged Tool holder: Type MultiFix Turning tool shank cross-section 20 x 20 mm Tailstock: Quill stroke 110 mm Quill diameter 50 mm Tailstock holder MK 3 Feed rates: Rapid traverse max. 10 m/min Feed force 6 / 3 kN Feed range 0 - 20 mm/-1 Thread cutting: metric 0.1 - 400 mm Inch 1/4 - 56 G/1" Module 0.125 - 28 mm.II DP 1 - 224 G/".II Number of threads max. 50 Total power requirement 10 kVA Machine weight approx. 1.5 t Space requirement approx. 2.8 x 2.0 x 2.0 m

Condition: good (used), Year of construction: 2003, Main spindle X-axis: 200 mm Z-axis: 345 mm Spindle speed: 6,000 rpm Bar passage: 42 mm Total power: 22 kW Machine weight (approx.): 5,000 kg Cedpfx Acozwplhsgshd

Condition: good (used), Year of construction: 1989, 1 used lead screw and spindle lathe Manufacturer: Weiler Type: Condor B Year of manufacture: 1989 Technical data: Center distance: 750 mm Center height: 165 mm Spindle bore: 40 mm Spindle speed: 22 – 2800 rpm Cedezuthhopfx Acgehd Tailstock: MK 3 Drive power: 1.6 / 3.2 kW Weight: 1040 kg Dimensions: 1,850 x 880 x 1,290 mm Equipped with: 3-axis digital display Lever collet chuck Chuck guard

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout K&C NEW Technical data: >> Year of manufacture: 1986, machine number 86-160-348 >> Center height: 160 mm >> Distance between centers: 650 mm >> Spindle speeds: 8 steps; from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev >> Usable threads: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal >> Collet clamping device, collets as new from 1 to 29 mm in 1 mm increments >> 160 mm new three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders Chjdpswthbijfx Acgjd >> Electric chuck guard >> Bed stop >> Rear wall >> Machine leveling feet >> Coolant device About the machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe built to toolroom precision in very good condition. The machine is, of course, fully functional. The Weiler was completely dismantled and newly painted in light grey. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces as if ground. Take the opportunity to inspect the machine under power on site and verify its condition for yourself.

Condition: good (used), functionality: fully functional, used 6-position turret tool changer for Weiler 260 Csdpfxjzu Tf Tj Acgohd

Condition: used, Year of construction: 2000, centre height 400 mm centre distance 3.000 mm max. swing over bed 810 mm max. swing over facing slide 510 mm max. swing-dia. in gap 850 mm control WEILER max. workpiece weight 3.800 kg spindle diameter in front bearing 150 mm spindle bore 106 mm faceplate diameter 630 mm worktool system Parat tailstock quill taper MT 6 dia. of quill 115 mm spindle turning speed range 1 - 1.800 U/min Lathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor. A comprehensive tool package is included in the scope of delivery. The machine video from the production plant will be shared on request. Chodpfx Acey Ty Ihjgjd The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: E-80 | E 80 | E80 x 3000 | E80x3000 | E 80 x 3000

Condition: used, Year of construction: 1996, Weiler Guide and Pull Spindle Lathe Type/Model: Condor AC Condition: Used Year of Manufacture: 1996 Technical Data: Center height: 165 mm Distance between centers: 750 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 180 mm Spindle bore: Ø 40 mm Spindle speed, stepless: 22 - 2,800 rpm Spindle head: DIN 55027 Size 5 (short taper) Drive power: 5.5 kW Tailstock and feeds: Tailstock internal taper: MK 3 Quill stroke: 110 mm Feed range automatic longitudinal and cross feeds: approx. 0.016 - 0.50 mm/rev Thread cutting range suitable for metric threads and inch threads: approx. 0.20 - 28 mm Dimensions (L/W/H): approx. 2000 mm x 860 mm x 1600 mm Weight approx.: 1,100 kg Equipment: - Quick-change tool holder system Multifix, 1 insert size A - Bed stop - Coolant system - Chuck guard with limit switch Cedpjzfgupefx Acgjhd - Collet chuck system, limit switch secured Costs for delivery by freight forwarder, free to curb, see shopping cart or in individual offers for request items.

Condition: good (used), Year of construction: 1997, Maximum turning diameter 950 mm Maximum turning height 200 mm Turning diameter over the bed 410 mm Turning diameter over the cross slide 200 mm Cedpfx Aszxqvkecgehd Bed width 330 mm Total spindle speed range 1 - 3000 rpm Documentation available (see images)

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 140 mm, center width: 500 mm, spindle speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, We are offering for sale a WEILER Primus VC lathe. This model series is particularly distinguished by the Siemens control panel and the fully stepless speed regulation. As the name suggests, the VC can operate with constant cutting speed. The machine has undergone extensive inspection in our workshop and is in excellent geometric, technical, and visual condition. All guides are in good order, the gearboxes run quietly, and the levers are easy to operate. We cordially invite you to test the Primus VC at our premises. We look forward to your inquiry! Availability: Immediately Centre height: 140 mm Centre distance: 500 mm Spindle bore: Ø 40 mm Tailstock taper: MK3 Quill stroke: 85 mm Available thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.50 x 1.00 x 1.50 m (L x H x W) Weight: approx. 700 kg Additional equipment and accessories: Siemens control panel, coolant system, chuck guard, leadscrew and feed shaft cover, emergency stop, operating manual, CE declaration of conformity, and much more on request. Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are at least workshop-tested - All lubricants and, if necessary, worn parts are replaced in advance Cjdpfx Asyalurjcgohd - Upon request, we can perform a complete or partial overhaul of your chosen machine - Upon request, we can repaint your chosen machine in the color of your choice - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety features - We are happy to handle shipping and/or installation for you

Condition: refurbished (used), functionality: fully functional, spindle bore: 40 mm, center height: 165 mm, center width: 750 mm, quill stroke: 85 mm, total length: 1,800 mm, total width: 1,300 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,100 kg, Dear Sir or Madam, We are offering for sale a Weiler Condor B lead and draw spindle lathe in fully refurbished condition! This model is particularly distinguished by its extremely user-friendly operation and its excellent ratio of footprint to center height/center distance. The Condor B is in the size range between the Weiler Praktikant and the Weiler Commodor and is therefore a true all-rounder in any workshop. The machine will undergo extensive refurbishment in our workshop, so that it will be in like-new condition both technically and visually! The following work will be carried out during the refurbishment of the machine: - Basic cleaning - Repainting - Overhaul of the guideways - Replacement of all lubricants - Replacement of all standard parts such as handles, buttons, screws, etc. - Replacement of all wear parts such as belts, chains, wipers, etc. - Replacement of all electronic components such as contactors, transformers, switches, etc. - Documentation with test report, parts list, and geometry report Availability: upon request Center height: 165mm Center distance: 750mm Spindle bore: Ø 40mm Tailstock taper: MK3 Chuck mounting: short taper DIN55027 size 5 with bayonet lock Quill stroke: 85mm Spindle speeds: 22-2800 rpm Possible thread types: metric, inch, module, diametral pitch Metric thread pitches: 0.18 - 28mm Spindle brake: can be switched on Voltage: 400V Dimensions: approx. 1.80x1.30x0.9m (LxHxW) Weight: approx. 1100kg Additional equipment and accessories: chuck guard (NEW), coolant system, 2x emergency stop, lead and draw spindle cover (optional), K+C digital display NEW (optional), operating manual, technical documents, and much more on request... Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are workshop-tested at least. - All lubricants and any worn parts will be replaced beforehand Cjdsztf A Ujpfx Acgohd - If desired, we will completely or partially overhaul the machine of your choice - If desired, we will repaint the machine of your choice in your desired color - If desired, you can order additional accessories such as tools, etc. directly with your order - If desired, we can install additional accessories such as safety devices, etc. - We will be happy to take care of the shipping and/or delivery

Condition: excellent (used), Year of construction: 2020, Travelling steady rest for Weiler E 50, year 2020. In very good condition. Clamping range: 12 - 125 mm. Chjdpfxoyfnwme Acgsd

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2552 Year of manufacture: 1983 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MK 4 Motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Spindle speed via 12 gearbox steps Chsdpfx Acoykca Hoged - EMCO 3-jaw scroll chuck Ø 200 mm with turning and boring jaws - Multifix size B quick-change tool post with 3 change cartridges - Automatic longitudinal and face feed - Coolant system - Spindle brake - Emergency stop - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1400 kg Very good condition

Condition: used, Year of construction: 1992, Weiler Guide and Lead Screw Lathe Type / Model: Condor B Condition: Used Year of Manufacture: 1992 Technical Data Center height: 165 mm Center distance: 750 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 180 mm - 185 mm Chjdpfozfhgtjx Acged Main spindle and drive Speed range: 22 - 2800 rpm Spindle bore: 40 mm Spindle head: DIN 55027 / Size 5 (with bayonet fitting) Drive power: 3.2 kW Feed and threading Longitudinal feeds: 0.016 - 0.8 mm/rev Metric thread pitches: 0.18 - 28 mm Tailstock Internal taper of the quill: MK 3 Quill travel: 110 mm Dimensions (L/W/H) approx.: 2000 mm x 860 mm x 1600 mm Weight approx.: 1,100 kg Delivery costs via freight forwarder to the curb are shown in the shopping cart or in the individual offer for items on request.

Year of construction: 1977, condition: used, Weiler Matador lathe year ca.1977 , three-jaw chuck , Multifix. Machine in a ready to use condition , By arrangement under power ready for demonstration. Chjdsnkad Sopfx Acgod

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : Chsdpsvivmyofx Acgsd We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection Csdovtp Edspfx Acgohd About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: good (used), functionality: fully functional, Used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Type: Condor 81 B Machine. No.: 87596 Year of manufacture: approx. 1987 Center distance: 750 mm Turning diameter over bed: Ø 330 mm Center height above bed: 165 mm Turning diameter over support: Ø 180 mm Center height above support: 90 mm Spindle bore: Ø 40 mm Tailstock inner taper: MK 3 Pinol adjustment: 110 mm Spindle speed: 45 - 2800 rpm. (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (drive motor stage 1+2) Mains connection: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Equipment + accessories: - 3-axis digital readout from Heidenhain type VRZ 750 - Quick clamping device and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix size B quick-change steel holder - LED work light - Bed stop - Automatic longitudinal & face feeds - Electro-mechanical spindle brake switchable - 2x emergency stop - Electrical feed key query (via sleeve with button) Csdpfx Aevadqzocgshd - Coolant tank with pump in the machine base - Folding chuck guard - Splash guard - Circuit diagram - Adjustable machine feet Space requirement: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This new generation of Weiler lathes is very user-friendly and robust. Machine can be demonstrated on site under power. All information without guarantee. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 2,500 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 1,100 mm, overall weight: 3,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2007. This Weiler E55X1000 features maximum turning diameter of 315 mm and a a center distance of 1100 / 2100 mm. It is equipped with a Sauter 8-fold tool system and a spindle speed range of 1 – 2500 rpm. If you are looking to get high-quality turning capabilities, consider the Weiler E55X1000 machine we have for sale. Contact us for further details regarding this machine. • Internal taper: Metric 90 • Spindle diameter in front bearing: 120 mm • Spindle bore: 83 mm • Flange diameter: 500 mm • Maximum turning diameter: 315 mm • Maximum torque: 1600 Nm • Tool system: Sauter 8-fold • Number of tool positions: 8 • Tool shank size: 32 x 25 mm Chsdpfey Em A Ajx Acgod • Turret interface: Capto C4 • Number of face slides: 1 • Center distance: 1100 / 2100 mm • Turning length: 340 mm • Tailstock taper: MK 5 • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Maximum tailstock travel: 1000 / 2000 mm • Continuous duty speeds (S1):Gear stage I: 89 rpmGear stage II: 355 rpm • Emission level: 80 dB(A) • Operating voltage: 400 V • Control voltage: DC 24 V • Connected load: 30 kVA • Nominal current: 43 A • Frequency: 50 Hz • Main fuses: 50 A • Condition note: Ball screw in Z axis makes noise, but dimensional accuracy is not affected Additional equipment • Extraction system Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Chodpfx Aju Aftgecgod Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: used, Year of construction: 2001, Technical details: turning diameter over bed: 410 mm turning dia. over face-slide: 200 mm turning length: 950 mm bed width: 330 mm turning diameter over support: 410 mm Cjdpfx Aszd Sg Ijcgjhd face slide travel: 630 mm centre height: 200 mm control: Siemens/Weiler D2 milling spindle dia. in forward position: 90 mm spindle bore: 54 mm range of revolution per miute: 1 - 3000 U/min feed speed: 0 - 20 mm/U rapid travel - longitudinal/face: 10/5 m/min tailstock taper MT: 4 diameter of quill: 65 mm quill stroke: 120 mm weight of the machine ca.: 2,1 t dimension machine approx.LxWxH: 2,3 x 1,4 x 1,7 m The E35 is neither a purely manual machine nor a classic CNC, but a hybrid: Work like on a conventional lathe Automatic cycles at the push of a button No complex programming required Extremely fast for single parts & small batch production Also suitable for operators without CNC knowledge Weiler describes it as follows: Simple parts like conventional machining Complex parts like CNC, but easier *