Used Weiler Lzd 220 for sale (190)

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and feed spindle table lathe in excellent condition! Technical specifications: >> Machine no. 2801 Fgsdpfx Afev Tyzcopsd >> Center height 120 mm >> Center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore 23 mm >> Short-taper spindle head DIN 55027 >> Tailstock MT 2 >> Feed rates from 0.03 to 0.15 mm/rev >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increments of 1 mm Drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle cover >> Clamping tool About the machine: Offered is a Weiler Primus table lathe with guide rail and drawbar in very good condition. The machine is fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a state-owned company where it was used little. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a polished finish. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition. (The base cabinet is included; the machine is not bolted to the machine.) A digital display is available for an additional charge.

Condition: used, functionality: fully functional, Weiler Matador VS-2 guide and feed spindle lathe Technical data: >> Year of manufacture approx. 1970 Machine no. M1012 >> Center height 140 mm Fedpfxevv Etvo Afpogd >> Center width 500 mm >> Speed: 30 – 3550 rpm >> Spindle passage 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.010 to 1.184 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> Collet device 32 collets (set is not complete) with holder >> 1 three-jaw chuck 1 set of jaws >> 1 four-jaw chuck 1 set of jaws >> Mulifix size A with 2 steel holders >> Change gears >> Bed stop About the machine: A used Weiler Matador VS-2 is offered in a fully functional condition. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet Fjdpswrm Dtjfx Afpjgd About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout K&C NEW Fgodpewthbisfx Afpsd Technical data: >> Year of manufacture: 1986, machine number 86-160-348 >> Center height: 160 mm >> Distance between centers: 650 mm >> Spindle speeds: 8 steps; from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev >> Usable threads: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal >> Collet clamping device, collets as new from 1 to 29 mm in 1 mm increments >> 160 mm new three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear wall >> Machine leveling feet >> Coolant device About the machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe built to toolroom precision in very good condition. The machine is, of course, fully functional. The Weiler was completely dismantled and newly painted in light grey. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces as if ground. Take the opportunity to inspect the machine under power on site and verify its condition for yourself.

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: Fgjdpovivmyjfx Afpjd >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Weiler precision lathe model Condor B, lead and feed screw lathe with brand new K&C 3-axis digital readout, CE compliant! Technical data: >> Machine No. 2442, year of manufacture 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake, selectable >> Length: 1.83 m, height: 1.29 m, depth: 0.88 m Equipment and features: >> New K&C 3-axis digital readout, 12-month manufacturer's warranty, supplied with operating manual Features: mm/inch switching, selectable ABS/INC coordinates, value halving function, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 x brand new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 x 200 mm 4-jaw chuck with 1 set of jaws >> New collet chuck system and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Machine feet Safety features: electronic spindle guard, 2 emergency stop buttons, changewheel box with safety interlock, spindle brake About the machine: Fedoxcuazopfx Afpjgd Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes work easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Center Lathe Model Condor B Guide & Feed Shaft Lathe with 3-Axis Digital Readout by K&C NEW from Training Workshop!! Technical Data: >> Machine No. 91-1814, Year of manufacture: 1991 >> Center height: 165 mm >> Distance between centers: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet locking >> Tailstock: MT 3 Fgodpfxsw Nw Dqj Afpod >> Feeds: from 0.015 to 0.46 mm/rev >> Threads possible: Metric, Imperial, Module, and Diametral Pitch >> Metric thread leads: from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Scope of Delivery and Features: >> NEW 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating manual Functions: mm/inch switch, ABS/INC coordinate selection, display value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, counting direction reversal >> 1 pc. NEW 160 mm 3-jaw chuck, 2 sets of jaws >> 1 pc. 160 mm 4-jaw chuck, 1 set of jaws >> NEW collet chuck and NEW collets from 2 to 24 mm, incremented by 1 mm >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle safety guard >> Rear splash guard >> Fixed steady rest >> Machine feet Safety features: electronic spindle guard, 2 emergency stop switches, change gear cover with limit switch, spindle brake About the machine: We are offering a Weiler Condor in very good condition. The machine is, of course, fully operational. It is a very robust and powerful lathe. The brand new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our premises.

Condition: excellent (used), functionality: fully functional, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988 Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev Fgodpfx Asxu Hlaefpsd >> Thread cutting capability: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. new 3-jaw chuck with 2 sets of jaws >> Collet chuck set, collets from 3 to 30 mm, 40 collets, some duplicate sizes >> Multifix size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Live centre For Safety: >> Cover for lead and feed screw >> 2 emergency stop buttons >> Spindle brake About the machine: A used Weiler Condor 81 lathe from 1988 is being offered in very good condition. The machine is of course fully functional. The lead and feed screws are covered for safety. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A full oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power at our facility.

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws Fgedpfxeu Aftgo Afpjd >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm Fedpfovtp Edox Afpegd >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: reconditioned (used), functionality: fully functional, spindle bore: 40 mm, center height: 160 mm, center width: 650 mm, quill stroke: 85 mm, total length: 1,600 mm, total width: 900 mm, total height: 1,500 mm, Ladies and Gentlemen, We are selling a Weiler Praktikant 160B lathe with 3-axis digital readout. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. You are welcome to visit us on site to see the condition for yourself. Availability: on request Fsdpfou H U S Hjx Afpegd Center height: 160mm Center width: 650mm Spindle clearance: Ø 40mm Tailstock taper mount: MK3 Quill stroke: 85mm Feed range longitudinal slide: 0.020 - 0.630 mm/rev Feed range cross slide: 0.006 - 0.200mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 720kg Further equipment and accessories: 3-axis digital display, coolant device, chuck protection, jaw chuck and other accessories on request... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 165 mm, center width: 750 mm, Dear Sir or Madam, For sale is a Weiler Condor B lathe. This model is particularly notable for its very user-friendly operation and an excellent space-to-center height/center distance ratio. The Condor B is sized between the Weiler Praktikant and the Weiler Commodor, making it a genuine all-rounder for any workshop. The machine undergoes a thorough partial overhaul in our shop to ensure it is in excellent technical and visual condition. All guideways are in good order, the gearboxes run quietly, and all levers are easy to operate. You are welcome to inspect the machine on-site to verify its condition yourself. Availability: on request Center height: 165 mm Center distance: 750 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Chuck mounting: short taper DIN 55027 size 5 with bayonet lock Quill travel: 85 mm Fjdpfsw N Np Sjx Afpsgd Spindle speeds: 22–2800 rpm Thread types possible: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.18–28 mm Spindle brake: switchable Voltage: 400V Dimensions: approx. 1.80 x 1.30 x 0.9 m (LxHxW) Weight: approx. 1100 kg Further equipment and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stop, leadscrew and feed shaft cover (optional), operating manual, and much more on request... Our service commitment to you: - We are a certified master machine engineering business - All machines are at least workshop-tested - All lubricants and any worn components are replaced prior to sale - On request, we offer complete or partial overhaul of your selected machine - On request, we can repaint your chosen machine in any color you wish - Additional accessories such as tooling can be ordered with the machine upon request - On request, we can also install further accessories such as safety devices - We are happy to handle shipping and/or on-site installation for you

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3595, Ladies and Gentlemen, We are selling a Weiler Commodor B lathe built in 2001 with Heidenhain 3-axis digital readout. The machine has been extensively overhauled in our workshop. Among other things, the main spindle bearing and the lead/traction spindle bearing were completely renewed! Technically, geometrically and visually, the machine is in excellent condition, which you are welcome to see for yourself on site. Availability: on request Machine no. 3595 Year of construction: 2001 Center height: 180mm Center width: 1000mm Fgodjthd Shjpfx Afpjd spindle passage: Ø 56mm max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4kW Dimensions: approx. 2.2x1.5x1m (LxHxW) Weight: approx. 1.8t Further equipment and accessories: 3-axis digital display, coolant device, chuck guard, pull-out chip tray, 3-jaw chuck Röhm, 4-jaw chuck Röhm, various clamping jaws... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice E00f3g2rl - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: excellent (used), Year of construction: 2020, Travelling steady rest for Weiler E 50, year 2020. In very good condition. Clamping range: 12 - 125 mm. Fgedpfx Aeyfnwmsfpod

Year of construction: 2010, condition: like new (used), We have the following accessories for the Weiler E30 lathe: 1. Faceplate, Schunk, 250mm, price: €600 Spindle head, DIN 55027, size 5 Fgjdpfx Afsgabvnjped 2. Faceplate, Röhm, 260mm, price per piece: €650 Spindle head, DIN 55027, size 5 1. Traveling steady rest, price: €450 2. Follower flange, price per piece: €210 Spindle head, DIN 55027, size 5 All parts are in very good condition.

Year of construction: 1977, condition: used, Weiler Matador lathe year ca.1977 , three-jaw chuck , Multifix. Machine in a ready to use condition , By arrangement under power ready for demonstration. Fsdpfjnkad Sox Afpogd

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Matador VS2 lathe, year of manufacture 1992, three-jaw chuck, Multifix, rear splash guard, electric chuck guard. The machine is in good working condition and can be demonstrated under power by appointment. Fgjdpfsx Sqvgex Afped

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm Fgsdpjwgi Tmsfx Afpsd turning length / mm

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min Fgjdpfjxaccxsx Afpjd motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - collet holder with lots of collets - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min Fsdpfxsxacirj Afpsgd motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Condition: used, turning length 800 mm turning diameter 280 mm turning diameter over slide rest 150 mm spindle bore 42.0 mm tailstock quill taper MT 3 MK bed width 208 mm Fgodpfx Ajxacg Rofpsd turning speeds 42 - 2022 U/min spindle taper DIN 55027/5 quill stroke 90.0 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 750 kg range L-W-H 1800 x 800 x 1250 mm Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key - machine base with storage area - pole-changing drive motor - operating instructions

Condition: repair required (used), turning length 1000 mm turning diameter over bed 380 mm turning diameter over slide rest 190 mm number of spindle speeds 25 - 2000 U/min. turning speeds 18 Stk. spindle bore Ø 56,0 mm tailstock quill taper MT DIN 228 / MK 4 quill stroke 150 mm Fjdsw U U Uqjpfx Afpegd bed width 310 mm spindle taper DIN 55027 / 6 feeds - longitudinal 0,022 - 0,8 mm/U feeds - cross 0,011 - 0,4 mm/U thread M 0,3 - 10,0 mm voltage 380 V total power requirement 7,5 kW weight of the machine ca. 1600 kg Basic functions are available Machine with various leaks Sold in current condition at a special price ! Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. - machine video - ?v=zCGu4i6V5dM Furnishing: - robust lead and pull spindle lathe - FORKARDT 3-jaw chuck Ø 200 mm, with chuck key - MULTIFIX steel holder - size B - with 3x inserts - movable tailstock, including keyless chuck - Chip protection back wall - EMERGENCY stop button at the front - adjustable bed stop - Coolant system including coolant pan - User manual (PDF)

Condition: like new (used), Weiler Primus Excellent condition! With accessories Fjdpfx Afoyy Ngtopegd

Condition: ready for operation (used), Year of construction: 2002, Lead and feed screw lathe / WEILER COMMODOR 230 AC - CE marking - Year of manufacture: 2002 - Center height: 230 mm - Swing over bed: 475 mm - Swing over cross slide: 270 mm - Distance between centers: 1000 mm - Spindle speeds: 25 – 2000 rpm - Automatic longitudinal / cross feeds - Thread cutting: metric / imperial / module etc. - Spindle nose DIN 55027 / size 6 - Tailstock taper: MT 4 - Drive power: 11 kW - Electric chuck guard - Multifix toolpost with inserts - Three-jaw chuck Fgsdpjywtiyofx Afpsd - Chip guard with work light - 2x Emergency stop - Coolant system - Machine feet - Documentation Dimensions (LxWxH): 2.6 x 1.1 x 1.6 meters / Weight: 1900 kg Errors and omissions excepted.

Condition: ready for operation (used), operating hours: 33,600 h, functionality: fully functional, spindle bore: 83 mm, center width: 2,000 mm, turning diameter over bed slide: 570 mm, spindle speed (max.): 2,500 rpm, controller model: Siemens 810D, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Swing diameter over bed: 570 mm Swing diameter over carriage: 340 mm Centre distance: 2,000 mm Speed range, stage 1: 1–625 rpm Speed range, stage 2: 4–2,500 rpm Spindle bore: 83 mm Spindle nose: Size 8 DIN 55027 Feed range longitudinal/cross: 0–20 mm/rev Metric threads: 0.1–400 mm Inch threads: 1/4–56 TPI Tailstock quill diameter: 80 mm Taper: MK 5 MACHINE DETAILS Control: Siemens 810D Electrical data Main drive: 20/17 kW Connected load: 30 kW Dimensions (L x W x H): 4,000 x 2,300 x 1,800 mm Operating hours: 33,600 hours EQUIPMENT Rapid traverse longitudinal/cross 8-position Sauter tool turret incl. holders Fgsdpfx Aexqpgfsfped Mayfran chip conveyor with coolant system Movable chip guard cover 3-jaw chuck Schunk Rota S 250 Manuals Note: The viewing windows and feed selection levers have been replaced. In addition, an oil change has been performed and the oil filter replaced.