Used Welding Head for sale (20,134)

Year of construction: 1978, condition: good (used), Ravensburger, type KT 45, year 1978 Center height over bed 600 mm Iedpfx Aaekyukdjbetn Center distance face plate to support 450 mm Face plate diameter 1,000 mm turning diameter in the recess max. 1.350 mm with digital display Power 18,5 kW

Year of construction: 2015, condition: excellent (used), Mecasonic MCS2 CAB ultrasonic welding system - Very good condition Itjdpfsvvw Ekex Aabsn - Year of manufacture: 2015 - 3 units available - CE declaration of conformity given - Condition: Incoterms EXW CH-4528 Zuchwil - Loading options available

Condition: used, Year of construction: 2011, Factory no.: LE 20.779, jib length: 50 m, max. lifting capacity: 5,000 kg / at the tip 1,350 kg, comprised of: slewing platform with cabin, counter-jib, jib foot section, various jib sections, trolley, 2 assembly platforms, radio remote control, counterweights: 6 x A at 1,450 kg each / 2 x B at 1,000 kg each / 1 x C at 500 kg, inspection log / further documents available, collection: on 27.11.2025 Isdpfx Aoxnafyeabstn

Condition: new, Year of construction: 2025, A compact device using the FIBER technology, designed for welding many types of metals with precision far exceeding traditional welding methods. Advanced technological solutions used in the offered welding machine allow to perform high-quality and repeatable welding welds of thin-walled materials and parts without the risk of deformation. Advantages of a laser welding machine Easy to use - thanks to the applied solutions and well-thought-out structure, the operator can start working after a short training Low indirect radiation, when working, it is enough to wear protective glasses to filter strong light, Welding much faster than with traditional methods, productivity can be increased by up to 3 to 10 times Concentrated beam: slight structure change due to the small heat-affected area, The repeatability of the welds, the welding seam is nice, the welds are high strength. Very thin materials such as 0.5mm stainless steel can be welded. Option of welding with or without wire. Technical parameters Maximum power 2000W Laser wavelength 1080nm Depth of penetration (stainless steel 1 m/min) 4.57mm Depth of penetration (black steel 1 m/min) 3.59mm Depth of penetration (aluminum 1 m/min) 4.0mm Depth of penetration (brass 1 m/min) 4.0mm Welding speed 0-120mm/s Automatic Wire Feeder Ø 0.8 - 1.6mm Maximum power consumption ≤6.0kW Cooling system aqua Working voltage 400V Shielding gas consumption 20L/min Dimensions 600 x 1100 x 1100mm Weight approx. 185 kg LATEST GENERATION WELDING HEAD WOBBLE head; Automatic wire feeder included; Adjustable spot size 0-5mm; The powerful welding head allows many types of beam guidance: -, ○, ◎, ⊙, 8, ∞; Iodpjizr Rljfx Aabstn Integrated connections for shielding gases and cooling system, Interchangeable nozzles allow for welding at different angles, 10 m of optical fiber that connects the head to the source, Adjustment of welding parameters directly in the head without having to go to the control panel; Full ergonomics - thanks to the light and flexible design, the head can perform welds even in hard-to-reach places; Easy to service - quick and easy replacement of the protective lens. Automatic wire feeder included The wire feeding system is synchronized with the welding machine software. The task of the feeder is to feed the filling, thanks to which the operator can focus 100% on the work of the head. Set includes laser welding machine with built-in cooling system welding gun with adjustable focus and a set of accessories Fiber laser source automatic wire feeder set of cables starter kit of nozzles and protective glasses THICKNESS OF WELDED MATERIALS Material WELDER POWER 1000W 1500W 2000W Stainless steel 0.5-3.0mm 0.5-4.0mm 0.5-5.0mm Black steel 0.5-2.5mm 0.5-3.5mm 0.5-4.5mm Galvanized steel 0.5-2.5mm 0.5-3.0mm 0.5-4.0mm Aluminum 0.5-1.2mm 0.5-1.8mm 0.5-4.0mm Brass 0.5-1.2mm 0.5-1.8mm 0.5-2.5mm

Condition: used, Complete Welding cell Fanuc; comprising 4 Safety door Euchner 2010 1 Cabinet RESA 1997 updated 2017 1 Fencing Michels Steel 1997 2 Safety light curtain Keyence/Assa Abbloy - Light curtain SL-V32/Scanner SZ-V32/Assa Abbloy Rp200 1997 updated 2017 2 Turntable Weiß CR 1000 Acopos1320 2017 Profibus 9 Robot Fanuc 6 x R2000 iB 165F / 3 x R2000 iC 165F 2009/2017 Profibus 9 Robot controller Fanuc 6x R30 IA / 3x R30 iC 2009/2017 Profibus 4 Weld gun on robot Düring servo. pneumatic 2017 Profibus with FESTO Servo control 6 Weld gun stationary Düring servo. pneumatic 2017 Profibus with FESTO Servo control 10 Weld timer Rexroth Bosch-Rexroth WSC60GK 2017 Profibus 10 Tip dresser Kyokutoh CDK-R 2017 10 Tip changer Kyokutoh DH-SVR2 AM1 2017 1 indexing conveyer FFT 2017 1 HIP (compressed air, water) FFT 2010 updated 2017 9 RIP (incl. Water suck) FFT 2010 updated 2017 1 MIG/MAG Weld Power/MIG/MAG Weld Torch/MIG/MAG Weld Controller/Gas Nozzle Cleaning Device SKS / LSQ5 Electricity source, Frontpull torch 8i, Controls Q80_B /2017 - Profinet Air-cooled Push-Pull torch 2 Nut Feeder Dietz+ Rollwa 2017 2 x W520772 S300/ 1x W520771 WS300 1 Projection weld timer Rexroth Bosch-Rexroth Indra Control VCP 05 2017 Bosch-Rexroth Indra Control VCP 05 1 Handling equipment Meyliplan 2023 pneum. Please note: PLC, HMI and weld camera sensor shown on the pictures will be removed and are not included! All product-related grippers and devices (either stationary or on robots) will be removed and are not included! Please note, this lot 29368-547 is offered for sale as a complete cell. Its components are simultaneously offered as individual lots 29368-102, -115, -123, -126, -138, -146, -151, -158, -184, -187, -190. Bidders can bid on the complete line and/or on individual lots. Sales are conditional subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Successful bidders will be notified within 1 working day. Ijdpfsxnxyvjx Aabjtn

Condition: used, Year of construction: 2022, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 952 kg Description: Iodpfx Aasxnqw Hsbotn - High-quality S355J2+N steel + plasma nitriding - Material thickness approx. 24.5–27 mm - Hole diameter 28 mm - Holes on surface in 100x100 mm grid - Rounded corners, edges, and holes - Side panel height 200 mm - Hole spacing on side panel 50 mm - Includes scaling on the surface - Construction reinforced with ribs - Grid lines enable precise assembly - Special equipment for welding tables available on request.

Condition: excellent (used), Cutter head Walter D125 mm Itsdpfjqgc Srex Aabon Type F2010

Condition: used, continuous power (apparent): 50 kVA, short-circuit current: 31 A, input voltage: 380 V, overall weight: 420 kg, welding power (max.): 126 kVA, Dear Sir or Madam, Below we offer you a DALEX spot welding machine "PMS 10-4", used and in very good condition. Technical data and dimensions: errors excepted. Prices are quoted: plus VAT ex stock, loaded free truck. Delivery time: immediately available from stock, subject to prior sale. Itjdpfx Aaowtr Exebjn Payment: advance payment. For further details, see PDF.

Condition: used, Year of construction: 1997, Serial no.: LE 40.290, outreach: approx. 60 m, max. lifting capacity: 6,000 kg / at the tip 1,400 kg, consisting of: slewing platform with cab and tip, counter-jib, trolley, tie bars, 1 assembly platform, 1 cab platform, various jib sections with tip, counterweights: 7xA at 2,580 kg each, 1xB at 1,600 kg, inspection book/other documents available, pickup: on 24.11.2025 Itsdpfxoxnaf To Aaben

Condition: reconditioned (used), Year of construction: 2023, load capacity: 6,000 kg, total height: 1,021 mm, total length: 2,940 mm, total width: 1,900 mm, The PX series welding positioner allows for safe lifting, rotation and tilting to the optimal position of elements for welding or assembly. The tilting cylinders are protected by a metal body, which protects them from mechanical damage or possible splinters created during welding. Specification: - Model: BEAR PX6000 - Lifting capacity: 6 tons - Rotation, tilt and lifting - Solid and reliable construction - Positioner powered by three-phase current - Table rotation using an electric turntable Iedpfx Aaowcff Robotn - Adjustment of the arm height and table tilt using hydraulic cylinders - Control of functions on the positioner housing Ideal for heavy welded elements

Condition: good (used), Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turntable and tilting table, welding turning device, welding turntable tilting table -Welding turning device: turning length 3130 mm -Turntable: Ø 800 mm -Drive: Servo Motor 1/1.6 kW with cooling, see photo nameplate -Rotation direction: right/left rotation -Transport dimensions: 3890/900/H1420 mm -Weight: 880 kg Itedpfx Ajxm Sqrjabon

Condition: as good as new (ex-display), Year of construction: 2025, SRF master figure left 2 m suction arm Scope of application Low smoke and dust Sporadic usage Use Little run the extractor hood required Flexible by additional hose connection rear Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Isdpfjdqzbrjx Aabstn Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg

Condition: good (used), used dividing head with a 3 jaw chuck from Röhm (110 mm). Iodpevtqllsfx Aabstn

Condition: as good as new (ex-display), FRONIUS MAGICWAVE 5000 AC DC Scope of delivery: ➤ Fronius MagicWave 5000 (500A) ➤ Fronius FK 4000 water cooling unit ➤ Fronius TIG hand welding torch ➤ Fronius trolley ➤ Ground cable 3-4m ➤ Pressure regulator Iodoxhd Tuspfx Aabotn

Condition: used, Year of construction: 2001, Serial no.: LE 42.130, jib length: approx. 45 m, max. lifting capacity: 5,600 kg / at the tip: 1,300 kg, consisting of: slewing platform with cab and counter-jib, trolley, counter-jib, various jib components with tip and tie rods, radio remote control, counterweights: 3xA at 3,250 kg each, 1xB at 1,500 kg, 1xC at 750 kg, inspection book/further documentation available, collection: on 26.11.2025 Itjdpfx Aoxnaf Heaben

Condition: new, Year of construction: 2023, Positioner powered by three-phase current Rotation of table and arm by means of hydraulic swivels Height adjustment of the arm by means of a hydraulic cylinder Controlling functions on the positioner housing Useful in positioning parts in: welding cleaning assembly Increasing work efficiency up to 40% The use of unlimited rotation in 2 axes and, in addition, vertical and horizontal movement, allows any positioning of the attached workpiece (also "overhead"). Itsdpfx Aashtq Risben The 3-axis positioner provides a significant improvement in work culture compared to traditional pan/tilt positioners (optimal positioning of the workpiece, easy operation). Advantages and benefits: For the employer: increased labor productivity by up to 40% through optimum positioning of workpieces - resulting in short amortization time of the device increased production efficiency does not require additional space on the shop floor better quality of welded joints - always possible to weld in the sub-lower position robust design of the device ensures long-term, trouble-free operation For the operator: ensuring ergonomic posture for the working person minimizing the risk of accidents - no changes in the fixing of objects no interruptions in work caused by waiting for the crane easy installation and operation It is possible to fully automate welding by using Kawasaki welding robots. We also offer positioners with a robot and integrated control system. ADDITIONAL OPTIONS: REMOTE CONTROL WITH CABLE TO OPERATE THE POSITIONER PEDAL WITH CABLE FOR OPERATING THE TABLE ROTATION STEPLESS ADJUSTMENT OF THE SPEED OF TABLE ROTATION AND ARM ROTATION FUNCTION OF CONSTANT TABLE ROTATION LENGTH AND SHAPE OF THE ARM SIZE AND SHAPE OF THE TABLE ROTATIONAL MASS We can make the positioner according to the customer's individual guidelines.

Condition: excellent (used), Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turntable and tilting table, welding turning device, welding turntable tilting table Ijdpfjw Nyguox Aabetn -Welding rotating device: pivoting with forming gas line in the center, foot switch -Control: Ess Type PS3E -Turntable: Ø 450 mm -Holder: four-jaw chuck Ø 400 mm -Spindle bore: Ø 62 mm -Dimensions: 780/600/H910 mm -Weight: 190 kg

Condition: as good as new (ex-display), Year of construction: 2025, SRF Maxi. (Picture on the right) 3 m suction arm Scope of application Iedpfx Aodqzcvoabotn Medium smoke and dust Regular usage Use Little run the extractor hood required Contamination free filter change Safe operation due to phase sequence detection High efficiency due to long Service life of the filter Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Automatic start/stop system (optional) Workplace lighting (optional) Technical data Procedure 2-speed Filter type disposable filter Filter surface approx. 20 m ² ᐳ 99% filtration efficiency Filter material of non-woven polyester Welding smoke off vagina class W3 Additional filter pre-filter (ALU knitted fabric) Basic data suction capacity Max 1,100 m³/h Extraction arm diameter Ø 150 mm Extraction arm, length 3 m Diameter suction connection Ø 150 mm -. Power supply 3 x 400 V / 50 Hz Motor 1,1 kW Noise level 70 dB(A) Dimensions (W x D x H) 790 x 815 x 1080 mm Weight 71 kg approx. 120 kg

Condition: excellent (used), Walter cutterhead, type: F3042B080Z0515 Isdpeqgc Thofx Aabstn

Condition: used, functionality: fully functional, "One-man device": set the external dimensions, insert the profiles, compensate for height deviations, and weld seamlessly on both sides. Whether you are producing steel windows, fire doors, or angle steel frames: with the CREA-SWISS all-in-one welding fixture, operators can fabricate perfect frames quickly, with high precision, and outstanding profitability. Swiss welding table for steel joinery fabrication. "One-man device": set external dimensions, insert profiles, compensate for height differences, and carry out complete welding on both sides in a single setup. Be it steel windows, fire doors, or angle steel door frames: with the CREA-SWISS frame welding jig, any operator can fabricate excellent frames rapidly, accurately, and economically. The welding fixture setup is completed within minutes. The frame width is precisely aligned along the longitudinal axis using a reduction gearbox. The measurement is clearly visible on an ergonomically positioned digital display. Frame height is adjusted directly at the corner stops, which incorporate integrated measurement scales. Technical Data Maximum frame size: 3000 mm x 2400 mm Minimum frame size: 470 x 610 (510) mm Profile height: up to 115 mm Height tolerance compensation: -1 mm to +1 mm Weight: 280 kg Advantages: Itsdpfx Aexpfhceabon • One-person operation • Full welding in a single clamping • Highly precise frame alignment • Accurate mitre adjustment • Rotatable along the longitudinal axis • Mobile workstation on casters • Optional crossbar supports for door leafs with transoms • Universal for all frame types More information: creametal.de/rahmenschweisslehre/

Condition: used, Year of construction: 1998, Serial no.: LE 39.694, jib length: 55 m, max. lifting capacity: 8,000 kg / at the tip: 1,550 kg, consisting of: slewing platform with cab and jib tip, radio remote control, trolley, counter-jib with tie rods, various jib sections with tip, 1 assembly platform, counterweight: 4xA at 2,580 kg each, 1xB at 1,600 kg, documentation/test book available, collection: on 01.12.2025 Ijdpfx Aaoxnaltsbetn

Condition: ready for operation (used), empty load weight: 1,60,000 kg, total length: 12,000 mm, total width: 7,000 mm, total height: 10,000 mm, laadvermogen: 300 ton tafeldiameter: 9500 mm variabel draaien en variabel kantelen 180° Itedpfx Aasxpkh Isbjn

Condition: excellent (used), Catalogue number 7759 TECHNICAL DATA Circular saw: - max saw blade diameter 350mm - spindle 30mm - blade adjustable front/rear, up/down, angle - pneumatic movement of the unit front/rear - blade guard - motor 2.2kW First and second milling spindle: - tenoning spindle: - spindle diameter 40mm - working spindle height 150mm - spindle lockable - pneumatic movement of milling units front/rear - manual adjustment up/down - max cutter diameter 300mm - motor approx. 7.5kW - side carriage – manual movement - carriage dimensions (L/W) 1000x380mm Iedpfjxg D Ayex Aabetn - angle fence - pneumatic hold-down clamp - overall dimensions (L/W/H) 2600/3200 (for shipping 2200)/1540mm - weight 1450kg ADVANTAGES – German-made – 3-spindle machine – not repainted – very good condition – used tenoning machine Net price: 13,900 PLN Net price: 3,270 EUR Net price calculated at exchange rate 4.25 PLN/EUR (in case of larger exchange rate fluctuations, the price may change)

Condition: used, diameter 85 mm tool adaptor SK 50 bore of diameter max. 130 mm Itjdpsv Dx Aaofx Aabsn adjustment of the slide 40 mm tool tapers in the slides 20 mm weight ca. 3 kg Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 2001, Serial no.: LE 42.448, jib length: 60 m, max. lifting capacity: 6,000 kg / at the tip: 1,600 kg, comprising: slewing platform with cab and tip, 1 cab platform, trolley, counter jib, tie rods, 2 assembly platforms, various jib sections with tip, counterweight: 7xA at 2,500 kg each, 1 supply cable with strain relief, 1 wind-free cable, additional documentation available, no inspection book available, collection: on 02.12.2025 Iodpfx Asxnalyeabetn