Used Welding Machine for sale (66,207)

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Pedpfx Abexddamepora

Condition: like new (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, ground cable length: 4,000 mm, type of cooling: air, hose package length: 3,000 mm, welding current (min.): 5 A, welding current (max.): 200 A, Unused Lascentrum MIG/TIG 200 ACDC Synergic MIG & TIG ACDC for steel, stainless steel and aluminium. Ideally suited for use at home, on site, for general welding work, light steel/stainless steel/aluminium construction, and in the workshop. 5-200 AMP 230 Volt Synergic ACDC TIG Pulse 2/4 Step Gas pre flow / Gas post flow Start current / End current Up slope / Down slope Pulse Time / Pulse Frequency AC Balance / AC Frequency adjustable AC Wave adjustable Spot welding Fixed programs / Program memory Elektrode option Including: SB150 Welding torch 3 Meter SR17 Tig Welding torch Earth cable 3 Meter 35mm² Elektrode cable Gas hose Manual (If in the original packaging) Original Packaging 3 Months Warranty of Cjays The machine is unused and comes from a stock lot. Predezqc U Aepfx Abpoa No manufacturer’s warranty from Lascentrum applies. Test Welding is possible in our Workshop in Valkenswaard Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 2022, condition: new, Manufacturer: Hermann Ultraschall (Herrmann Ultrasonics) Type of equipment: Ultrasonic welding machine Model: HiQ G1 Dialog 20/2400 LF Serial number: 20.087/21 Year of manufacture: 2022 Generator power: 2400 W Operating frequency: 20 kHz Welding force (at a pressure of 8 bar): Prsdpfxoznvcns Abpsa minimum: 30 N maximum: 2490 N Working stroke: 150 mm

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Equipment: type plate available, Built in 1994, modernized by the machine manufacturer KUKA in 2012. The system features a facing unit, a flanging die, and a tube conveying unit for unloading the welded components. Pedpfx Aox I Efbebpjra We can adapt this system to meet customer requirements. A complete retrofit is also possible. The machine is assembled and can be demonstrated. We can also manufacture your friction welding joints for you, up to a clamping force of 300 tons. Feel free to contact us!

Condition: excellent (used), Year of construction: 2019, We are selling a PCB spot welding system from AMADA, mounted on a workbench. The welding head is type FD 120-A/So, year of manufacture 2019. Prjdpsyhwdujfx Abpea

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: Podpeykvdlofx Abpora - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 390701, For sale: a two-head welding machine, URBAN model AKS 3900. The machine is in perfect working order. It was used in a single-shift production environment. Podpfx Aozd Ra Tsbpjra Year of manufacture: 2021. Purchase invoice date: 2022.

Condition: used, 50 units of Fronius TPS 450 welding machines, used 🧰 Product features • Manufacturer: Fronius • Model: TPS 450 • Condition: used, see photos • Color: red • Mains voltage: 380 V / 400 V / 415 V • Apparent power: 17.2 kVA • Efficiency: 90% • Welding current range: 3 - 450 A • Working voltage: 20 - 38 V • Open-circuit voltage: 50 - 80 V • Insulation class: F • Protection class: IP 23 • Cooling method: AF • Welding processes: MIG/MAG, MMA, WIG/TIG 💰 Price per unit: €1500 net, excluding VAT • Quantity discounts: available upon request • Shipping costs: available upon request, Europe-wide • Delivery time: immediately available • Inspection and collection: possible at any time by appointment We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty shelving, used & new Description: Are you looking for high-quality warehouse shelving to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: Pedpfjyn Ii Iex Abpera • Over 10,000 linear meters of shelving immediately available • 20,000 m² of storage platforms & steel platform structures immediately available • Weekly 30–50 semi-trailer loads of goods turnover for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty shelving, high-bay racking, shelving with shelves, tire racks, or shelving for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty shelving Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round service package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including thorough cleaning. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and thorough cleaning. Whether you became aware of us through heavy-duty shelving or are looking for galvanized heavy-duty shelving / heavy-duty shelving systems – we guarantee the best conditions. Contact us for a non-binding offer!

Year of construction: 2012, condition: ready for operation (used), A Dalex welding press/projection welding machine including Sortimat (ATS) feeding unit is available. Rated power at 50% duty cycle: 100kVA, max. welding power: 455kVA, open-circuit voltage: 8.88V, max. short-circuit current: 67kA, cooling water flow rate: 10l/min, electrode force min./max.: 120daN/720daN, single-stroke cylinder: 100mm, machine throat depth: 250mm, stop range: 148mm-400mm, belt diameter: 260mm. Weight: approx. 850kg, control system: MPS 200 multi R1. Including sorting and feeding unit, flow monitor, adjustment device and return stroke monitoring. Documentation available. An on-site inspection is possible. Predpfx Abexr Nwajpja

Year of construction: 1999, condition: excellent (used), Spot welding machine NIMAK PMP 5/35 + water cooling unit Year of construction approx. 1980 Power at 50% ED 35 kVA Projection 250 - 450 mm Working stroke 40 mm Electrode force 100 - 460 kp infinitely adjustable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insertion electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Adjustability of the electrode holder 200 mm Connected load 83 KVA Mains connection 380 volts, 50 Hz - 4-time control - stepless power adjustment - Single points and series points - parallel electrode guidance - Water-cooled (without cooling unit) - electric foot switch Weight 300kg Pjdsium Nijpfx Abpjra

Condition: like new (used), Year of construction: 2021, Power at 50%: 50kVA Short circuit-current: 25kA Electrode force: 420daN Throat depth: 380-700mm --- Weld control: RS 17 (5-times, 2-program) --- Extra Equipment: - foot pedal - main switch Prodpfx Abjzl A Rtepja --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Year of construction: 2023, condition: used, voltage 400 V 50 Hz V current intensivity 100 A output 36 kw Psdpfjzbvn Esx Abpsra compressed air 4,5 bar weight 3.200 kg In our assessment, the laser welding system is in like-new condition. Technical features: - Welding of pressed-in components in the cooling plate - 3000W fiber laser - Pneumatic suction of the cooling plate including rotary device - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: like new (used), functionality: fully functional, total height: 450 mm, total width: 240 mm, total length: 670 mm, input voltage: 400 V, ground cable length: 4,000 mm, type of cooling: air, hose package length: 4,000 mm, welding current at 60% duty cycle: 250 A, welding current at 100% duty cycle: 200 A, welding current (min.): 15 A, welding current (max.): 300 A, Unused Lascentrum MIG 300 DP-3 Synergic Double Pulse MIG/MAG for steel, stainless steel and aluminium. Ideally suited for on-site work, general welding, medium-duty steel/stainless steel/aluminium structural work, and in the workshop. 15-300 AMP 400 Volt Synergic Puls / Double Pulse 2/4 Step / 4 Roller Drive Fixed Programs / Program Memory Stick Option Including: SB250 3 Meter Welding Torch Earth Cable 3 Meter 35mm² Electrode Cable Gas hose Manual (If available in the Packaging) Original packaging 3 Months Warranty The machine is unused and comes from a stock lot. No manufacturer’s warranty from Lascentrum applies. Test welding is available at our workshop in Valkenswaard. Podpszqc Aajfx Abpsra Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), Parallel-operated, water-cooled spot welding machine Manufacturer: DALEX, Model: PL 63-1 Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 31.5 kA Secondary open-circuit voltage: 7.04 V Electrode force: 390 daN Reach: 250-550 mm Arm distance: 150 or 310 mm Prodpjzrupzjfx Abpea with mounting control cabinet according to VDE 0113 Main switch Synchronous welding control 15036

Condition: good (used), Year of construction: 1995, Rated power: 63 kVA Thrust: 520 mm Electrode arm distance: 200 mm Welding capacity for steel: approx. 7 + 7 mm Welding capacity for non-ferrous metals: approx. 2 + 2 mm Electrical connection: 380 V kW Predpfx Aswurw Rebpja

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, type of cooling: water, hose package length: 15,000 mm, welding current at 60% duty cycle: 500 A, welding current at 100% duty cycle: 400 A, welding current (min.): 20 A, welding current (max.): 500 A, Esab Origo Mig 502cw – Water-cooled MIG/MAG Refurbished, serviced, tested and ready for immediate use 3-month warranty Specifications: 20-500 AMP 380 Volt Water-cooled 2/4 Step / 4 Roller Drive Burnbacktime adjustable End current Elektrode option Including: 4 Meter Welding Torch, earth cable with clamp, gas cable, and 15 metre interconnection hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties. Prsdpjzp Dznefx Abpja

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Fiber laser welding machine with 2000-watt laser power 4-in-1 device Welding with automatic wire feed Welding without wire Cleaning Cutting - Top device at a top price from our showroom - approx. 10 operating hours - 2kW laser source by MaxPhotonik - German-language menu navigation - Universal device for welding / cutting / cleaning - incl. 4-roller welding wire feeder - integrated water cooling - immediately available Prjdpfxeug Unfj Abpja Also take advantage of our attractive leasing/financing offers. Approx. machine dimensions: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 150kg

Year of construction: 2021, operating hours: 227 h, condition: excellent (used), functionality: fully functional, The HF machine was used for welding PVC tarpaulins. Maximum welding area: 4 cm x 100 cm. Prsdpfx Aozbb Tmsbpja Current welding stamp sizes: 2 cm x 100 cm and 2 cm x 50 cm, in use since 02/2022.

Year of construction: 2003, condition: ready for operation (used), A fully enclosed Soyer CNC coordinate stud welding system is available. Travel X/Y: 750mm/750mm, table dimensions X/Y: 1240mm/1000mm, max. table load: 100kg, positioning accuracy: +/-0.2mm, positioning speed: 24m/min, welding heads: 2, welding head type: Soyer SK-5AP, vibratory feeder: Soyer UVR-300, welding unit type: MBS-10N, stud size range: M3-M8. Machine dimensions X/Y/Z: approx. 1500mm/2050mm/1700mm, weight: approx. 1000kg, control: PC, operating hours: approx. 20000h. Including two welding units, two universal vibratory feeders, stud holders, plungers, ground clamps and feed hoses. Documentation available. An on-site inspection is possible. Prodpfx Ajzqfwmsbpoa

Condition: good (used), Power: 50 kVA Pjdpfx Abepy Dypopora Arm design: 520 mm

Condition: good (used), Year of construction: 2003, machine/vehicle number: 18220203, System for automated robot welding Mains voltage:3 x 400 V Mains voltage tolerance:+ /- 15 Mains frequency:50 / 60 Hz Mains fuse protection:35 A slow-blow Primary continuous current:18 - 29.5 A - 100 duty cycle Primary continuous power:13.1 kVA Power factor:0.99 Pedpfeqpgntex Abpera Efficiency:0.9 Welding current range:MIG/MAG: 3-500 A Rod Electrode: 10-500 A TIG: 3-500 A Welding current:40 duty cycle: 500 A 60 duty cycle: 450 A 100 duty cycle: 360 A Welding voltage range:MIG/MAG: 14.2 - 39.0 V Rod electrode: 20.4 - 40.0 V TIG: 10.1 - 30.0 V Max. Welding voltage:49.2 V Open circuit voltage (OCV):70 V Dimensions (mm) H x W x D:626 x 287 x 477 mm Weights:35.6 kg Included in the scope of delivery: Power source on steel platform (RS 422 interface) Cooling unit (FK 4000-R) Fronius VR 1500 4R/W/E robot wire feed case Supply voltage 55 V DC Rated current 4 A Wire diameter 0.8 - 1.6 mm 0.03 - 0.06 in. Wire speed 0.5 - 22 m/min 19.69 - 866.14 ipm. Torque 4 Nm Protection class IP 21 Dimensions I x w x h 405 x 208 x 205 mm 15.94 x 8.19 x 8.07 in. Weight 7 kg 15.43 Ib. Drive 4 roller drive Maximum shielding gas pressure 7 bar 101 psi. Coolant Original Fronius coolant Maximum coolant pressure 6 bar 87 psi. Welding torch Robacta Drive W/E/6.25m Hose package 6.5m Various wearing parts (e.g. pipe bends, gas nozzle, contact pieces) Suction unit with hose guide

Condition: like new (used), Power at 50%: 35kVA Short circuit-current: 15,5kA Electrode force: 470daN / double stroke Throat depth: 400mm --- Weld control: TE 101 (8-times, 100-program) --- Extra Equipment: - foot pedal - main switch --- Warranty: 6 months Prjdpfx Aozl A S Robpsa --- Spotwelding electrodes + spare parts at stock

Condition: good (used), Year of construction: 1999, machine/vehicle number: 99 C 70090, Offer 19013 Technical data: - Nominal power at 50% duty cycle 16 kVA - Continuous power 13.5 kVA - Max. welding power 63 kVA - Welding values for sheet steel 3.0 + 3.0 mm - Projection approx. 100 mm Psdpfx Aev Du Daobpjra - Arm distance 130 mm - Electrode force 280 daN - Air consumption at full load of the pliers approx. 6 l/min - Cooling water quantity approx. 8 l/min - Connection / connected load 400 V / 63 kVA - Space requirement approx. W 500 x D 1000 x H 500 mm - Weight approx. 50 kg - with: - separate control unit AKZENT T 504-1 - Suspension bracket with gimbal ring

Condition: used, Year of construction: 2022, operating hours: 10 h, functionality: fully functional, machine/vehicle number: NS-009-50Hz-11kN-300, type of input current: AC, nominal power at 50% duty cycle: 160 kVA, throat depth: 300 mm, short-circuit current: 25,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 15 V, Zens Multifunction Spot Welding Machine 160 kVA – 50 Hz – 11 kN – Year of Manufacture 2022 For sale is a Zens multifunction spot welding machine in a robust industrial design. The machine is designed as a 50 Hz alternating current system and is suitable for various spot welding applications. The machine features an integrated seam welding adapter. The corresponding seam welding heads are not included in the scope of delivery and can be purchased separately. Thanks to the modular design of the machine, it is possible to use different welding tools and applications. Technical Data Manufacturer: Zens Model: NS-009 Machine Designation: Multifunction Spot Welding Machine Prsdpfx Ajztn Sxebpea Year of Manufacture: 2022 Welding Technology: Alternating Current (AC), 50 Hz Welding Power: 160 kVA Duty Cycle: 50% Max. Welding Force: 11 kN Welding Control: SER PLC Control: Siemens CE Safety: 2-Hand Control Seam Welding Adapter: Integrated Equipment Zens Multifunction Spot Welding Machine 50 Hz Alternating Current Technology Integrated Seam Welding Adapter SER Welding Control Siemens PLC Control Device Carrier System with Touchscreen 2-Hand Control as CE Safety Device Modular Machine Design Robust Industrial Design Available Separately The seam welding heads are not included in the machine's selling price and can be purchased separately. The "On Top" water cooling unit is also not included in the machine's selling price and can be purchased separately. The machine is in good condition and can be inspected and demonstrated by appointment. Note: Seam welding heads and the "On Top" water cooling unit are available separately and are not part of the machine offer. Subject to technical changes and errors.

Condition: used, MIG MAG welding machine, gas-shielded welding unit CLOOS, type GLC 403 PA-TS Prjdpfxszugnzj Abpea Manufacturer's No. 8198, Year of manufacture 1994 Rated power 400 amps Power 400 amps - 60% duty cycle 310 amps - 100% duty cycle Adjustment range: stepless Connection hose package: 4.5 meters Mains connection: 380 volts, 50 Hz, 32 amp plug - 2-cycle and 4-cycle welding unit - External wire feeder, type CK 72/5TSZK with 2-roller drive and 4.5-meter hose package - 4-meter hose package with central connection and EHRIG hand torch, type Senator-800-D - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 300 kg Good condition