Used Welding Machine for sale (66,004)

Condition: good (used), functionality: fully functional, Ultrasonic welding unit BRANSON, model 8.200 Gjdpoylpqbsfx Agfjbk

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, MSE Hollinger, for welding the 4 corners of plastic components in a single operation; used, technically refurbished in 2017, year of manufacture 1998. Welding dimensions: Max: 2920 x 3650 mm, Min: 420 x 490 mm. Weld bead limit: 2.0 mm. Gbodpfx Agsyl H Hmefek

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heater Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Usable Heating Plate Area: Width 600 mm x Depth 400 mm Maximum Part Dimensions: - Max. Part Width: 620 mm - Max. Part Depth: 420 mm - Max. Upper Part Height: 350 mm - Max. Lower Part Height: 350 mm (Combinations of part heights possible, depending on contour) - Max. Working Temperature for contact process: 400°C The machine's modular frame structure enables easy retrofitting and conversions. Side doors and the front door in the welding area are easy to open (for simple retooling). The automatic safety lift door ensures high operator safety. Temperature controllers on the operator panel are equipped with actual/target value displays. The operator panel is a Siemens PLC unit. Machine control is via Siemens PLC (S7-300 controller). The heating elements feature temperature sensors for temperature regulation and act as a safety shut-off in case of overheating. Locating pin systems on the tool clamping surfaces enable reproducible receptacle positions. Advantages of Heater Element Welding Technology: - Secure welding of parts with thin or varying wall thicknesses is possible - Low rejection rate due to precise and reproducible weld joints - Thanks to precise time control, temperature control, and force dosing, even sensitive parts can be welded - Almost all thermoplastics can be welded with this process - Different plastic types can be welded together (compatibility should be checked) Technical Data: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Nominal current: 20 A - Required supply cable cross-section: 5 (supply cables) each 6 mm² - Required pneumatic connection: 6 bar Godeykvdlepfx Agfebk Machine Dimensions: - Machine width approx. 1.22 m - Machine width incl. operator panel approx. 1.8 m - Machine depth approx. 2.1 m - Machine depth incl. operator panel approx. 2.6 m - Machine height approx. 2.4 m - Machine height with raised safety door approx. 2.85 m (door open) Weight: Approx. 2.2 t

Year of construction: 1991, condition: ready for operation (used), Technical features: heated knives, weld bead limitation 0.2mm, optimization of the welding result through the parallel sliding welding process, individual adjustment of the welding parameters, quick changing of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/Takt, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, supply voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg. An inspection on site is possible. Gsdpfxeylbrdj Agfobk

Condition: used, Forming area max. (length,width) / mm max. depth of product positive / mm max. depth of product negative / mm Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Gedpfxjwgi Sij Agfsbk Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Description has been adopted.

Year of construction: 2007, condition: used, welding machine KVT MT 01-HAT SO, with Rotary table, year: 2007 - 0 working hours, price: 8.800 €, contact: Mr. Rainer Eckerle Gbodpecquugsfx Agfjk

Condition: used, Year of construction: 2000, current intensivity bis 300 A Gbsdpfx Ageyacp Hsfok burner heads . dimensions of the machine ca. . m

Condition: used, Year of construction: 2000, current intensivity bis 350 A burner heads . dimensions of the machine ca. . m Gbedpfx Aeyacpyegfsk

Year of construction: 1978, condition: ready for operation (used), Suitable for PVC films, working width: 940mmm, welding power: 42kVA, welding area: 940x720mm², throughput: 400 cycles/h, length: 8000mm. Gbedpfxoqu Ubuj Agfek

Year of construction: 1990, condition: ready for operation (used), With MIG/MAG Welding System Messer Griesheim LG1200, including accessories, documentation and tests according to accident prevention regulations (UVV), an on-site inspection is possible. Gbsdpfx Ajq Ttz Nsgfjk

Year of construction: 2010, condition: ready for operation (used), Electrode force: 100daN, welding capacity: 255kVA, nominal input: 80kVA, with Cooling System DALEX DRF 5.2. Gjdpoiknv Ejfx Agfobk

Year of construction: 2000, condition: ready for operation (used), Arm length: 550mm, max. welding power: 136kVA, length: 640mm, width: 930mm, height: 1550mm, weight: 290kg. Gbedpfxsk N Dmvo Agfek

Year of construction: 2007, condition: ready for operation (used), Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm. Gsdpfonvfduex Agfsbk

Year of construction: 2002, condition: ready for operation (used), Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm. Godpfx Ajnvfdqogfebk

Condition: good (used), Year of construction: 2009, machine/vehicle number: 20080229, This is a C-frame welding station Type: 130 MF Machine-No.: 20080229 YEAR OF MANUFACTURE: 2009 U1N: 400V / 50HZ U20: -9V level 1 S1: 58kVA I2p 6.46kA ED 100% S%: 130 kVA ED 20% Fmax: 1140daN at 6 bar I20c: 42.5 kA Q: 18L/min Opening: up to 170mm Projection: 350mm Control cabinet: Machine no.: 20100079 Gbjdpfovgdt Aex Agfsk

Condition: good (used), functionality: fully functional, machine/vehicle number: 940329, type of cooling: water, This is a NIMAK PMP 6-2 / 100 spot welding machine. TYPE: PMP 6-2/100 MACHINE NO.: 940329 Dqm: 72N U1N: 400V 1~ 50 HZ Sn 50% ED: 100kVA S max: 318 kVA Gbsdpjvbgxqjfx Agfjk I20c : 48 kA U20 from 5.8 V to 8.3V in 2 steps Clamp opening: 240mm - 500mm Outl. l: 350mm Fmax: 1100 daN at 6 bar Cooling water 10L/min

Condition: used, This is an SKS LSQ5X welding power source Gbedpfx Aeuxlz Ajgfek Included in the scope of delivery 1x LSQ5X welding power source 1x SKS Frontpull 8 (23°) 1x SKS Power Feeder PF5 1x Powerclutch HD collision protection 1x Q80 welding process controller

Condition: used, This is an LSQ5X welding power source from SKS Welding Systems, together with a Weld Process Controller MULTIPROCESS - Q80 and an SKS Frontpull 8 (23°) Gbjdpeuxbx Dofx Agfjk

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 180991_03, This is a Wagner spot welding machine TYPE: 0281000-110A-AC with FELDPAUSCH nut and bolt feeder YEAR OF MANUFACTURE: 2019 Supply voltage: 40V Rated frequency: 50HZ Secondary current max: 17kA Rated power at 20% ED: 110 kVA Welding force: 1 KN at 1 bar Max. operating pressure: 10bar Gbedpfx Agjvgd Efjfok FELDPAUSCH nut and bolt feeder TYPE: MSV 08

Condition: excellent (used), 2 - Used Urban AKS 4110 head welding machine - Heated stainless steel blades on top - Heated stainless steel blades on bottom - Weld seam limitation: 0.2 mm - Maximum welding length: 3.25 m - Set of support arms Gedpfx Aoykp Dxegfobk

Condition: used, Year of construction: 2009, 2009 current intensivity 300 A wire dia. 1 mm sofort einsatzbereit 239836 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Gbedpfxjx U A Ruj Agfek +++++

Condition: used, Year of construction: 1978, sheet width . mm plate thickness . mm serial number 20719 Gbjdpfsucgvajx Agfjk total power requirement . kW weight of the machine ca. 1,4 t

Condition: used, Year of construction: 1960, Technical details: current capacity: 60 kVA throat: 680 mm arm distance: 115 / 415 mm pincer opening adjustable: 180 mm rated capacity: 60 kVA welding power: 71 kVA electrode capacity: 100 bis 600 daN voltage: 380 V / 50 Hz V air pressure: min./max.: 6 / 10 bar cooling water consumption: 12 l/min weight of the machine approx.: 685 + 200 kg connection voltage: 380 V / 91 A V rated capacity: 60 kVA connected load: 54 kVA dimension L-W-H: ca. Maschine: 1.700 x 850 x 1.750 mm dimension L-W-H: ca. Aggregat: 900 x 650 x 1000 mm POINT WELDING MACHINE - WELDING TRANSFORMER Direct current three-phase welding machine Application: Spot, projection and series spot welding Maximum short-circuit power 89 kVA Primary short-circuit current 135 A Secondary current = short-circuit current: 25 kA and welding current max. 20 kA Electrode stroke max. 90 mm; electrode force min./max.: 100 daN / 600 daN Stroke sequence max. with 10 mm stroke 400 strokes/min. Spot fitting: electrode holder Ø 30 mm, adjustable 180 mm, arm distance = min./max.: 115 / 415 mm Gedpou Nv Emjfx Agfebk 2-fold foot switch Cooling unit, mobile = movable on wheels, connection power 1.45 kW, pipe connection R 3/4 inch, coolant R22 *

Condition: used, Year of construction: 2004, Technical details: table diameter: 400 mm table turning speeds: stufenlos U/min tilting range table plate: 90 ° voltage: 230 V / Hz V connected load: 11,8 kVA machine weight approx.: 220 + 173 kg POSITIONER - ROTARY TABLE with welding source Messer Griesheim Application: for circumferential seam welding Welding device: Welding rectifier Messer Griesheim Variomatic 40 for MIG-MAG, direct current; protection class IP 23; cooling type F with remote control Stepless current/drain feed, 4.0 meter hose package Torch head Gbodsu Nkxhjpfx Agfek Ground clamp/ground cable Size: L: 1.1 x W: 0.5 x H: 1.3 Weight approx. 279kg Welding turntable MB Milano, TGA 75: swiveling welding turntable up to 90° allows horizontal and vertical welding (direction of rotation left and right) Infinitely variable speed; operation via control panel and/or foot control stands on transport trolley Size: L: 0.8 x W: 0.6 x H: 1.3 Weight approx. 173kg Wire feeder type Eurotrac SLV, feed rate 1.2 - 18 m/min *

Condition: used, Technical details: current capacity: 100 kVA throat: 250 mm arm distance: ca. 400 mm current capacity: bei 50%=63 kVA total power requirement: 100 kVA weight of the machine approx.: ca. 600 kg space requirements of the machine approx.: L:1,2xB:0,8xH:1,6 m Spot Welding Machine - capacity by 50% ED: 63kVA, secondary voltage 4,4-10,8 Volt - operational current by 10 % ED 26kA, secondary short circuit current 44kA equipment: - control over plant type E 0423.2 -eltros II from LEW Henningsdorf - foot control Gbedpfxsu Nwxbj Agfek Machine not tested, on sale as is! i.D. *