Used Welding Machine for sale (66,545)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, throat depth: 430 mm, nominal power at 50% duty cycle: 88 kVA, type of cooling: water, overall weight: 279 kg, Electrode holder, electrode arms, transformer and water-cooled electrodes Welding controller with graphic display Medium-frequency technology / inverter Welding controller PY800 Hsdpfx Ajyvx Hzsirsw Electrode stroke 60 mm Water requirement 9 L/min

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: Hsdpfx Asykvdloirow - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: used, Tecna 3484 Universal Spot Welding System, 8 kVA Universal welding station, 8 kVA, with manual welding gun and dual program capability. Simultaneous connection of two tools with automatic selection of the corresponding welding program, which saves time and prevents errors by simplifying and ensuring a safe workflow. Body repairs: Resistance spot welding of sheet metal, smoothing with a dent puller (nails and washers), localized heating (carbon electrode), screw and rivet welding, dent removal from stainless steel sheet metal. Synchronous SCR welding control, adjustment of welding time in cycles and pulses, adjustment of welding current, and compensation function. Mains connection: 400V Mains frequency: 50 / 60 Hz Hedpfx Ael Smn Ssirew Fuse: 25 A Rated power at 50% duty cycle: 8 kVA Max. welding power: 35 kVA Max. secondary current: 6.4 kA Heating current 100%: 0.88 kA Year of manufacture: 2014 Weight: 85 kg More items – new and used – can be found in our shop! International shipping costs available upon request!

Year of construction: 2011, condition: ready for operation (used), Eine Strecker Widerstandsstumpfschweißmaschine mit integrierter hydraulischer Presseinheit ist verfügbar. Nennleistung bei 50%: 120kVA, Nennstrom: 300A, Betriebsdruck: 350bar, max. Spannkraft: 69kN, max: 44kN, Hydraulikaggregat: K-VDS-700, Schneidleistung: 32mm, Kolbenpresskraft: 44t, schwenkbar: möglich. Maschinenabmessungen X/Y/Z: ca. 1800mm/1100mm/1600mm, Gewicht: ca. 2300kg, Steuerung: VIPA S7. Dokumentation vorhanden. Besichtigung vor Ort ist möglich. Hedpfxewfg Ede Airew

Condition: used, Spot Welding Machine SCIAKY type S0 432 NT Capacity: from 0,5 to 6 mm thick Throat depth: 380 mm Arm spacing: from 190 to 340 mm Arm Length: de 250 à 500 mm Pressure: 6 bars Voltage: 380 V Width: 1100 mm Depth: 500 mm Hedez I Dgfspfx Airow Total height: 1500 mm Weight: approx 500 KG

Condition: used, current capacity 8,0 kVA throat 80 - 480 mm contact pressure capacity 17 - 235 daN horn spacing 140 mm mm rated capacity 8,0 kVA voltage 380 V total power requirement 17,8 kVA weight of the machine ca. 77,5 kg dimensions of the machine ca. 0,35 x 0,80 x 1,05 m - Serial-No.: 18310126 - 2 Hjdpfx Aisz Sdy Nsrsw

Condition: good (used), Year of construction: 1996, machine/vehicle number: 960537, Offer 24514 Technical data: - Rated power at 50% duty cycle: 35 kVA - Adjustable reach up to approx. 520 mm - Opening width up to approx. 250 mm - Welding values up to: - Steel sheet: 4 + 4 mm - Brass sheet: 3 + 3 mm - Aluminum sheet: 2.5 + 2.5 mm - Welding current adjustable in stages - Electrode force at 6 bar: 300 daN - Required air connection: 6 bar - Cooling water flow rate approx. 4 l/min - Connection: 400 V Hjdj Afxk Hopfx Airew - Space requirement approx.: W 670 x H 1550 x D 1350 mm - Weight approx.: 350 kg - Includes: - NIMAK control unit - Electronic foot switch - Separate cooling water re-cooling unit

Condition: like new (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, warranty duration: 6 months, type of cooling: water, overall weight: 4,000 kg, working width: 1,000 mm, Schlatter NQD - Cross seam welding machine - Overhauled Hodpfx Aiou Tqhhorjw We offer here a completely overhauled Schlatter NQD cross seam welding machine. The delivery time of the machine is approx. 4 months. Welding heads: 4 pieces Travel distance: 950mm Welding speed: up to 12 meters / minute The machine is only for sale as reconditioned / as good as new. With kind regards T. Becker

Condition: as good as new (ex-display), ⭐ FRONIUS TPS 4000 ⭐ Fully equipped Device description/scope of delivery: Hedpfx Aisvlwh Djrew Fronius TPS 4000 fully equipped device - you can't get more than this! - Pulse 400 Ampere power source - FK 4000 FC cooling unit with optional filter including flow control (==>if no water circulates, the device shuts down to protect the hose package). - VR 4000 with optional rollers underneath + long connecting hose package + metal feed rollers - only the best of the best. - Fronius Aw5000 hose package with Job Master function on the torch (==>display on the torch / amperes, job, feed, arc adjustable on the torch) Photo = scope of delivery. All prices quoted are starting from prices. Prices are calculated individually according to your configuration requirements. New price approx. €15,000 (net). We are offering it for 1/3 the new price. Not comparable to Transsteel junk. Why buy from us rather than from anyone else: - We are professionals when it comes to this Fronius welding machine series. We always have around 60-80 units in stock. Only these Fronius devices, not other manufacturers! - We don't just push the devices through; we disassemble them, test them, replace wear parts, and only sell them when everything is working perfectly. - All our devices are sold with the popular Fronius welding torches. NOT a 100-euro buy-it torch, but QUALITY! The Fronius welding torches cost between 650 and 900 euros net, depending on the configuration! - Our devices are "all" clean and don't have burn holes in the displays or countless burn holes/dents scattered throughout the device! You're buying an item from us that's worth seeing and doesn't look completely finished! - It's worth buying from us. - As our customer, you have the opportunity to obtain suitable spare parts and support at reasonable prices if necessary. - You will receive a proper invoice with VAT shown. All devices can be inspected, paid for, and picked up at our main warehouse in Vienna by appointment! Insured shipping on pallets is of course possible! All prices are starting from £100. You can configure the devices with us. Robot device or handheld device. Long or short connecting hose package. A wide variety of hose packages to choose from. Synchropuls. 270, 400, or 500 amp devices in stock. CMT version available as handheld or robot. It's best to call us. We'll discuss your application and give you an initial price estimate.

Condition: used, Year of construction: 2015, Offer 26163 Technical data (approximate): Hedpfjzg A Risx Airsw - Maximum workpiece diameter: 80 mm - Overhang: 70 mm - Welding torch stand adjustable in X, Y, and Z - Stand travel via handwheel: 500 mm - Stand overhang: 70 mm - Distance between centers: 600 mm - Tailstock with pneumatic pressure spindle - 3-jaw chuck: 100 mm - Hand-held remote control - Connection cable - Pneumatic connection - Table frame: W 2000 x H 850 x D 700 mm - Footprint (approximate): W 1150 x H 650 x D 500 mm - Weight (approximate): 200 kg

Year of construction: 2013, condition: excellent (used), Ultrasonic welding system Manufacturer: KLN Stock number: Hjdpfevxppaex Airsw Year of manufacture: 2013 or 2009 Type: PXO number P600031440 MXO number M60413293 Equipment: the system consists of two stations, Individual sale possible Price: EUR 5,000 per station Price including 19% VAT: EUR 5,950 per station

Condition: used, Capacitor discharge welding machine MEGATRONIC, type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimal welding times. Spot and projection welding machine The CD (Capacitor Discharge) welding technology works according to the principle of transformed capacitor discharge. Year of manufacture: 1993 Very high welding performance with a relatively small mains connection. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat-sensitive components - welding of steels with high carbon content - welding of surface-coated workpieces Rated power: 12288 Ws Uc: 3200 Volt Capacity: 2400 µF Open-circuit voltage: 10 Volt Electrode force: 200-2000 daN, continuously adjustable Operating air pressure: 6 bar Mains fuse: min. 35 Amp. Operating current: 32 Amp. Mains connection: 400 Volt, 50 Hz - Programmable control unit megapuls CD-12000 - Parallel electrode guidance Hjdpeguvtdefx Airjw - Electrical 2-hand control panel located beside the machine - Control cabinet with control unit fixed to the machine Weight: 3000 kg Good condition

Year of construction: 1998, condition: good (used), functionality: fully functional, Edge milling machine, manufactured by IMAC year of construction 1998 . Model : CB 18 . Hjde Adnv Aopfx Airjw Series : B20 .

Condition: used, MF welding machine with water-cooled projection welding head Medium-frequency projection welding head Manufacturer: TECNA (Italy) Model 3670 E CF00 Serial No.: Year of manufacture 2014 Rated welding power 25 kVA Max. welding power 160 kVA Mains connection 400 Volt, 50 Hz - Welding control TE750 or TE760 Hsdpfx Ajg U A Uzeirew - Projection welding head for single-sided spot welding - Ideal for repair work in the bodywork area, ensuring the best welding quality - Water-cooled, type 2BHPLN - Mobile transport trolley Weight approx. 155 kg Very good condition - like new

Year of construction: 2026, operating hours: 100 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: FL80, High frequency welding machine Revised and tested 2026 Arm 80cm Hsdpfjy Dtz Aex Airjw Single electrode 20x900mm Plexiglass hand guard protection Power 12KW Absorption 15KVA Control panel on movable external arm ITL9-1 triode tested and working 12 months warranty

Condition: good (used), Medium frequency 1000 Hz spot welding machine, 400 V 50 Hz Make: DALEX Model: PMS 11-4 MF Arm reach: 950 mm with double-acting cylinder Rated power at 20% duty cycle: 180 kVA Secondary short-circuit current: 37 kA Hsdpfxsvyk Sfo Airew Secondary open-circuit voltage: 9 V Electrode force: 60-600 daN Weight: 550 kg

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2113/21, type of input current: three-phase, input voltage: 400 V, total height: 2,200 mm, total width: 1,500 mm, total length: 2,000 mm, nominal power (apparent): 100 kVA, electrical fuse: 250 A, working range: 40 mm, welding power (max.): 100 kVA, overall weight: 2,500 kg, A new, unused butt-welding machine. Originally acquired for butt-welding 40 mm rebar, it was never put into service because the project was cancelled. The machine is currently fitted with 40 mm round jaws, but custom jaws of any required shape can easily be manufactured for it. In addition to rebar, the machine can be used to fabricate joints for heavy machinery or anchor bolts for reinforcement work. Hodpfx Aez Ehvloirow Suitable for the butt welding of all types of steel grades up to 1,500 mm².

Condition: used, 50 units of Fronius TPS 450 welding machines, used 🧰 Product features • Manufacturer: Fronius • Model: TPS 450 • Condition: used, see photos • Color: red • Mains voltage: 380 V / 400 V / 415 V • Apparent power: 17.2 kVA • Efficiency: 90% • Welding current range: 3 - 450 A • Working voltage: 20 - 38 V • Open-circuit voltage: 50 - 80 V • Insulation class: F • Protection class: IP 23 • Cooling method: AF • Welding processes: MIG/MAG, MMA, WIG/TIG 💰 Price per unit: €1500 net, excluding VAT • Quantity discounts: available upon request • Shipping costs: available upon request, Europe-wide • Delivery time: immediately available • Inspection and collection: possible at any time by appointment We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty shelving, used & new Description: Are you looking for high-quality warehouse shelving to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of shelving immediately available • 20,000 m² of storage platforms & steel platform structures immediately available • Weekly 30–50 semi-trailer loads of goods turnover for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty shelving, high-bay racking, shelving with shelves, tire racks, or shelving for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty shelving Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round service package: Hsdpfsyn Ii Iex Airsw 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including thorough cleaning. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and thorough cleaning. Whether you became aware of us through heavy-duty shelving or are looking for galvanized heavy-duty shelving / heavy-duty shelving systems – we guarantee the best conditions. Contact us for a non-binding offer!

Year of construction: 1978, condition: ready for operation (used), Suitable for PVC films, working width: 940mmm, welding power: 42kVA, welding area: 940x720mm², throughput: 400 cycles/h, length: 8000mm. Hjdpfx Aioqu Ubuorsw

Condition: like new (used), Power at 50%: 35kVA Short circuit-current: 15,5kA Electrode force: 470daN / double stroke Throat depth: 400mm --- Weld control: TE 101 (8-times, 100-program) --- Extra Equipment: Hsdpozl A S Rjfx Airew - foot pedal - main switch --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: good (used), Year of construction: 2014, Manufacturer: MIBA Type: LNF65 Control: SIEMENS 840D Year: 2014 Specifications Metric US Standard There are (currently) no specifications for this machine. Dimensions (estimated) Length 0 mm Width Hsdpfxewq Hqko Airjw 0 mm Height 0 mm Weight 0 kg Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: excellent (used), Air-operated, water-cooled rocker-arm spot welding machine Brand DALEX Type SL 16/S Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Secondary open-circuit voltage: 1.8 - 3.5 V Electrode force: 278 daN Arm reach: 180-500 mm adjustable Arm spacing: 140 or 300 mm With 8-position switch for power preselection Additional control unit 1036 Hjdpov Sql Nefx Airsw

Condition: used, MERKLE Insquare W 300 AC/DC Welding Machine with original hose set Primary: Voltage: 3 x 400 V Frequency: 50 (60) Hz Hsdol Sm Hbspfx Airew cos phi: 0.95 TIG DC Range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A TIG AC Range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A Electrode Welding: Electrode diameter: 1.5-6 mm Open-circuit voltage: 80 V Working voltage: 20-32.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (40°C) Primary continuous power: 13.1 kVA Primary continuous current: 19 A Primary peak current: 22 A Welding Processes: 10-stage switch: TIG DC Negative, TIG DC Positive, TIG DC Negative with start pulse, TIG AC low-noise, TIG AC Rectangular TIG AC "Balanced TIG", Electrode Negative Electrode Positive Electrode "Sinusoidal" Electrode Rectangular Selector Switch 1: 10-stage switch: Current 1, Time 1, Ramp-up and ramp-down time, Starting current, ending current, Ignition pulse, point time, Pre-gas and post-gas time Selector Switch 2: 9-stage switch: Current 2, Time 2 (for pulse operation), AC balance, AC frequency, Hot start time and current, Current adjustment, Electrode diameter, display U Settings: 2 potentiometers for selector switch 1 and 2 Displays: 2 LED displays with preview and hold function for current, voltage, time, frequency Time functions: 4-stage switch: OFF, Slow pulsing, Fast pulsing, Spot welding Ignition: 4-stage switch: OFF, High frequency, Lift-TIG Energy control: 4-stage switch: on the unit, Hand or foot remote control, Welding torch Operating mode: 4-stage switch: 2-stroke, 4-stroke, 4-stroke with 2 currents, Gas test, Test, Program Program memory: 20 memory locations freely assignable AC frequency: 50-200 Hz AC balance: 9-91 % Pre-gas time: 0-3 s Post-gas time: 0-25 s Current rise time: 0-2 s Current fall time: 0-20 s Ignition pulse: 0-100 ms Spot time: 0.1-2.5 s Slow pulsing: 10 ms-2.5 s Fast pulsing: 50 Hz-5 kHz Hot start time: 0-1.5 s Hot start current: 10-200 % Current adjustment: 100-250 % Button: Test protection device Button: Program selection LED: Power ON, Over temperature, Fault, Protection circuit, Display hold, Start current Rise, Current 1, Current 2, Fall, End current Power source: IGBT inverter Ignition: High frequency or Lift-TIG Standard: EN 60974-1 "S" / CE Torch connection: EURO central connection with 5-pin connector Torch cooling: Water circulation cooling system Socket 50 mm²: Workpiece cable Socket 50 mm²: Electrode welding cable Power connection: 4 x 4 mm², 5 m long Gas connection hose: 2 m Weight: 130 kg (300 AC/DC) Dimensions L x W x H: 910 x 600 x 910 mm with bottle holder Gas bottle holder: 10 - 20 - 50 l gas bottle More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Automatic in-line welding machine for PVC profiles (or similar), with a cycle fully controlled by PLC. Operating cycle: PLC with digital control of temperature and welding/cooling intervals via display. Adjustable profile support arms, facilitating positioning and ensuring operator safety. Hedpoyw Rx Esfx Airew Machine in perfect working condition, subject to regular annual maintenance, complete with manual.

Condition: used, Year of construction: 2007, machine/vehicle number: 0185476, Offer 26283 Technical data: - Water-cooled WIG – DC welding system, mobile - Welding current continuously adjustable with digital display - min. 5 A to max. 420 A - Mains connection 400 V - Including: - SYNERGIC control with programmable welding tasks - 2-cycle – 4-cycle setting - HF ignition and Liftarc - Gas pre-flow control, etc. - Hose set 8m, lightweight design Hsdpfx Aoz Rwiyeirsw - Ground cable - Pressure regulator - Space requirement approx. W 700 x H 1200 x D 1200 mm - Weight approx. 200 kg