Used Wf for sale (389)

Condition: reconditioned (used), Year of construction: 2008, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 2008 - partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red Mach. no.: 344349 Guarantee: 6 months Ksdpfxshikrrs Abcolp geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - Fixed table 650 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tightening system DIN 69872 - Central lubrication, electric - Coolant system - Chip tray - Operating instructions - Used as seen -

Condition: good (used), Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table Kjdpfskvrptjx Abcjlp -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron WF 51C/155 -Motor: AEG 380V 8 kW 1400/2850 rpm -Dimensions: see photos / technical. drawing -Dimensions: 1700/580/H700 mm -Weight: approx. 525 kg

Year of construction: 2001, condition: good (used), Electric motor Manufacturer Danfoss Year of construction 2001 Type WF-DA90LT-H FCM 315 Type 12 Motor number J369521 Power 1.5 kW Speed 1,500 rpm Speed control range 150 to 3,000 rpm Shaft diameter .... mm Diameter of impeller 40 mm Shaft length mm Shaft diameter 140 mm Bolt circle of clamping screws 110 mm Kedpfxehgbtve Abcslp Control unit Weight 22 kg Dimensions 340 x 240 x 180 mm several motors available

Condition: used, Year of construction: 2004, Operating hours: Control on: 3123 h Machine on: 2970 h Program run: 902 h Spindle runtime: 988 h Controlled axes: 3 Technical Data: Travel X/Y/Z: 650 / 500 / 450 mm Clamping surface: 1000 x 600 mm Spindle taper: SK 40 Spindle speed: 12,000 rpm Max. table load: 400 kg Klsdpfowglapex Abcsp Number of tool magazine positions: 20 Power: 24 kVA Machine weight, approx.: 5,500 kg Equipment: - Heidenhain iTNC 530 CNC control - 20-position automatic tool changer - Heidenhain tool probe - Heidenhain workpiece probe - Heidenhain handwheel - Menzel minimal quantity lubrication - approx. 25 tool holders

Condition: ready for operation (used), Speed: 3150 rpm, travel X/Y/Z: 710mm/500mm/500mm, number of spindle speeds: 21, feed: 2000mm/min, spindle mount: ISO40/M16, milling head table height: 559mm, table dimensions X/Y: 500mm/1000mm, T-slot spacing: 63mm, max. workpiece weight: approx. 500kg. Dimensions X/Y/Z: approx. 2700mm/2300mm/2200mm, weight: approx. 3300kg, control: Heidenhain TNC 155, documentation available. Kledpfx Abstuwk Uscep

Year of construction: 1992, condition: ready for operation (used), X-axis: 560mm, Y-axis: 500mm, Z-axis: 400mm, clamping table dimensions vertical: 300/450mm, number of threaded holes: 2/6, threaded hole spacing: 45mm, thread: M16, angle table clamping surface: 460/800mm, number of T-slots: 7, T-slot spacing: 63mm, T-slot width: 14mm, max. workpiece weight (recommended): 350kg. Milling spindle drive number of working spindle speeds: 21, speed (geometrically graduated): 40-4000/min, step increment: 1.259, spindle motor power: 3.3/4kW, tool holder: ISO 40 / M16 with draw-in groove, vertical quill stroke: 90mm, feed in all 3 axes steplessly adjustable: 2-3000mm/min, rapid traverse X-axis and Y-axis: 6000mm/min, rapid traverse Z-axis: 4000mm/min, feed motor torque longitudinal and transverse: each 3.5Nm, feed motor torque vertical: 7Nm, control: Heidenhain TNC 407, connected load: 8.7kW, length: 3705mm, width: 2430mm, height: 3100mm, weight of the machine with vertical milling head and angle table: 2410kg, weight of the crate base: 170kg, weight of the transport crate: 400kg, operating hours: 18,924h. Accessories: 3D probe, 20x tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An on-site inspection is possible. Ksdpfx Abexcxz Njcelp

Condition: good (used), Mikron WF 32 CH Universal milling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Kedpfx Abowit Rhecslp Technical specifications Manufacturer: Mikron Type: WF 32 CH Control: Heidenhain TNC355 Travels: X 560 mm Y 500 mm Z 400 mm Clamping surface: 530 x 900 mm Rapid traverse: X, Y 6,000 mm/min, Z 5,000 mm/min Spindle speed: 20 - 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: new, Year of construction: 2024, Universal milling and drilling machine Kunzmann WF 610 M with Heidenhain TNC 128 control system Paths X/Y/Z = 610/400/450 mm Speed 1-4500 rpm Power 8.5 kW at 100 % ED Spindle SK40 DIN 69871 (form AD) with tightening bolt DIN 69872 Fixed angle table 800x 425 mm 6 x 14 H7 T-slots coolant device 66 liters electric handwheel HEIDENHAIN HR 510 FS Further technical data is available on request. Klsdpfx Aouf Sv Djbcsp The machine is located at our premises in 71334 Waiblingen-Beinstein, is immediately available and can also be inspected. Please register in advance.

Condition: new, Year of construction: 2022, functionality: fully functional, Kunzmann WF 410M tool milling machine with Heidenhain TNC 128 control. Brand new and CE-compliant! Technical specifications: >> Year of manufacture 2022 Machine no. 411555 >> Milling table clamping area 650 x 375 mm Clamping slots 5 Slot width 14 H 7 Slot spacing 63 mm Maximum load 250 kg >> Speed range 1-4500 rpm >> Feed X, Y, Z axes (infinitely variable) up to max. 5/5/4 m/min >> Travels X/Y/Z: 410/350/450 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 2000 kg >> Dimensions approx.: 2 x 2 x 2 m >> Connected load 13 kVA Ksdpfx Abev Rppkecslp Accessories and equipment: >> Heidenhain TNC 128 control >> Heidenhain HR electronic handwheel 510FS >> Vertical and horizontal hydraulic clamping >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions >> Machine light >> Minimum quantity lubrication >> Counterholder >> Digital display for spindle stroke >> Oriented spindle stop (tapping without compensating chuck) >> Chip protection cabin >> KT 130 edge finder >> Coolant system >> 200 mm rotary table >> Dividing head with 125 mm three- and four-jaw chuck >> 125 mm hydraulic vise About the machine: Offered is a Kunzmann WF 410M tool milling machine, built in 2022, in new condition with a Heidenhain TNC 128 control. The TNC 128 provides numerous dialog-guided cycles with graphic simulation for fast and easy data entry, e.g.: various drilling cycles, thread cutting, bolt circles, hole pattern, rectangular pockets, rectangular tenons, and multi-pass milling of surfaces. A very easy-to-use control system. The machine also has hydraulic clamping for both vertical and horizontal operation. Converting from vertical to horizontal is very easy by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and try out the Kunzmann on site with power on.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Tool milling machine Kunzmann WF7/3 with Heidenhain TNC 310 path control Very good CONDITION CE-compliant!! Technical data: >> Year of manufacture 2004 Machine No. 370506 >> Milling table clamping surface 800 x 425 mm Kedpfxswpkchs Abcelp Clamping slots 6 Slot width 14 H 7 Slot distance 63 mm Maximum load 300 kg >> Speeds up to 4500 rpm >> Feed range up to 2000 mm/min. Rapid traverse up to 5000 mm/min. >> Travel distances X/Y/Z: 600/400/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic drawbar system >> Weight approx. 2000 Kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor: 5.5 KW Accessories and equipment: >> Heidenhain TNC 310 path control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Electronic handwheel >> Heidenhain probe >> Technical documentation, spare part diagrams, operating manual >> Full protection cabin >> Coolant system About the machine: A Kunzmann WF7/3 tool milling machine with a Heidenhain TNC 310 path control is being offered. This universal milling machine is in very good condition. A very easy-to-use control system. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal is very simple thanks to the fold-away vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann on site under power.

Condition: used, Year of construction: 1990, x-travel 450 mm Kedpfx Aspxrknsbcjlp y-travel 400 mm z-travel 400 mm control Heidenhain 355 total power requirement 4 kW weight of the machine ca. 2,4 t

Condition: used, Year of construction: 1989, x-travel 500 mm y-travel 360 mm z-travel 420 mm control Heidenhain 355 tool taper SK 40 weight of the machine ca. 1,7 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Kljdpfoh Hrvfjx Abcop Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: LAPP, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: DT Klsdokzpm Hjpfx Abcsp -Power: 300VA -Primary: 3x380V -Technical data: see photo identification plate -Dimensions: 150/90/H150 mm -Weight: 5.7 kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Bosch, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: 100-911637 -Power: 4.5kVA -Primary: 3x380V Kedpfx Askyy Uqjbcjlp -Secondary: 3x95/165 V -Dimensions: 335/135/H350 mm -Weight: 41 kg

Condition: used, Ball screw with nut, transroll screw, ball screw nut, lead screw, threaded rod, threaded bolt, threaded rod, ball screw, linear bearing, precision ball screw -Manufacturer: Mikron, ball screw from CNC milling machine Mikron WF 51C/155 -Thread length: 540 mm -Shaft: Ø 32 mm Kodpskvrqiofx Abcslp -Dimensions: see photos -Dimensions: 870/140/H130 mm -Weight: 18kg

Condition: good (used), Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 -Type: TR15-XA-140-230V -Control cards/single modules: see photos -Dimensions: 480/260/H365 mm -Weight: 24 kg Klodewd N S Dopfx Abcjp

Condition: good (used), Permanent magnet motor, electric motor, servo motor, geared motor, three-phase motor -Manufacturer: Siemens, Permanent Magnet Motor from CNC milling machine Mikron WF 51C/155 -Type: HU3074-,0AC01-Z -Voltage: 167 V -Power: 1.8 kW -Speed: 2000 rpm -Shaft: Ø 22 x 45 mm -Number: 2x motors available Kedpfx Abekxhpuscolp -Price: per piece -Dimensions: 390/140/H185 mm -Weight: 23 kg/pc.

Condition: good (used), Year of construction: 1994, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -Manufacturer: Knuth, CNC tool milling machine type WF 5 NC -Clamping table: 800 x 330 mm Ksdpfx Ajwyivnebcslp -Travel: X/Y/Z 400/330/440 mm -Spindle holder: SK40 -Quill stroke: 60 mm -Speeds from: 63 to 3150 rpm -Coolant system -Accessories: including extensive accessories see photos -Dimensions: Machine: 1500/1345/H1900 mm / Control cabinet 750/450/H1730 mm -Total weight: 1960 kg

Condition: used, Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke Klodekzpngopfx Abcop -Manufacturer: varimax, soft start choke, three-phase choke from CNC milling machine Mikron WF 51C/155 -Type: D 1515 S3 -Current: 10A -Dimension: 180/90/H190 mm -Weight: 9.5 kg

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine made by Mikron type WF 2 SA year 1990 with Heidenhain active digital readout TNC 114 Stepless feed Lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping surface 635 x 250 mm Feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min Kledpfx Absrywgzecsp Holder ISO 40 Vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg

Condition: used, functionality: fully functional, machine/vehicle number: WF 74 C TNC, feed length X-axis: 900 mm, feed length Y-axis: 630 mm, feed length Z-axis: 500 mm, travel distance X-axis: 900 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 25 rpm, total height: 2,420 mm, total width: 3,573 mm, total length: 3,925 mm, table width: 600 mm, table length: 1,200 mm, input voltage: 400 V, Equipment: documentation/manual, Langsverplaatsing X -as 900 mm Dwarsverplaatsing Y - as 630 mm Hoogte verplaatsing Z - as 500 mm Afmetingen opspanvlak- tafel (LxB) 1200 x 600 mm Freeskop-opname spil (ISO) ISO 40 Kodpoyh Ahpsfx Abcolp Boordiepte 100 mm Max aantal snelheden 20 > 6300 rpm Sturing Heidenhain

Condition: good (used), Horizontal milling device – counterholder for KUNZMAN milling machines series WF. Kjdevr Stuopfx Abcslp This was an accessory for a KUNZMANN WF 4/3 TNC 124 There are 2 pieces available. The new price at Kunzmann is over € 2,000 + VAT. With a corresponding adapter plate it should also fit other machines e.g. EMCO, MIKRON; DECKEL; FPS etc. Price net ex warehouse

Condition: used, Year of construction: 1996, x-travel 400 mm y-travel 350 mm z-travel 400 mm tool taper SK 40 spindle turning speed range 1,0 - 4.000 U/min feeds 0 - 2000 mm/min quill stroke 60,0 mm table-size 650 x 350 mm T-slots 14 H7 Control TNC 124 engine output 5,5 kW weight 1800 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm New price ~ 55.000 euros (!!) Furnishing : - Universal tool milling machine - HEIDENHAIN pattern control TNC 124 - The control panel can be swiveled to the right of the machine - hydraulic tool changer (DIN 69872) - Vertical milling head - SK 40 - X-axis feed .. 0 - 2000 mm / min - Y-axis feed .. 0 - 2000 mm / min Klsdjw U U Sijpfx Abcep - Feed Z-axis .. 0 - 2000 mm / min - Central lubrication, electrical - coolant device - Chip tray - Operating instructions for machine + control Special accessories included: - hydraulic machine vice - many tool holders - HEIDENHAIN HR 410 electronic handwheel

Condition: excellent (used), Year of construction: 2022, Kunzmann WF 410 M Milling Machine (2022) Manufacturer: Kunzmann Model: WF 410 M Milling Machine Year of manufacture: 2022 Condition: used, very good, as new Operating hours: 2355h Spindle hours: 253h X-travel: 410 mm Y-travel: 350 mm Z-travel: 450 mm Main drive (100%/25% duty cycle): 6.8/13.0 kW Speed range: 1-4500 rpm Tool holder: SK 40 DIN ISO 7388-1 Feed rate: up to 5 m/min Weight: approx. 2,000 kg Fixed angle table Clamping surface: 800 x 425 mm T-slots: 6 x 14 H 7 Table load max.: 300 kg Coolant system Machine lamp Horizontal milling spindle with gearbox Scope of delivery: – Electronic handwheel HR 510 – Original documentation Klodpfox Ni U Nex Abcep Without vise.

Condition: good (used), Transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Trasfor, transformer Trafo 1 PH Snl from CNC milling machine Mikron WF 51C/155 -Type: TNM1m2k5/E -Technical data: see photo of the nameplate Kodpfxjkzpmuj Abcjlp -Dimensions: 180/160/H215 mm -Weight: 25.5 kg