Used Wf for sale (390)

Condition: excellent (used), Year of construction: 2024, operating hours: 3,855 h, functionality: fully functional, machine/vehicle number: 1200F001894YW, Loading weight: 115–128 kg Drum volume: 1154 l Filling ratio: 1:10 – 1:9 Spin speed: 695 rpm G-factor: 350 Kedpfxsw Nw Euj Abcjdi Standard features: - Direct steam heating - Freestanding, high-speed - Machine housing made of chrome-nickel steel (AIS 304) - Inner and outer drum made of chrome-nickel steel - Perforated inner ribs / PowerWash - Higher mechanical action - Low water consumption - Intuitive touch control XCONTROL FLEX PLUS

Condition: used, Year of construction: 1980, x-travel:500 mm y-travel:500 mm z-travel:400 mm turning speed range:30 - 2240 U/min feeds -stepless-:1 - 750 mm/min rapid traverse:1500 mm/min table surface area:400 x 800 mm tool taper:SK 40 total power requirement:7,8 kW weight of the machine ca.:1.8 t Kdedpecxxq Dsfx Abcji dimensions of the machine ca.:2,1 x 1,6 x 2,2 m

Condition: used, Year of construction: 1989, machine/vehicle number: 6766, x-travel:560 mm y-travel:500 mm z-travel:400 mm table-size:900 x 530 mm control:Heidenhain TNC 355 B/Q tool taper:ISO 40 / M 16 turning speed range:40 - 4000 U/min rapid traverse X-axis:6 m/min Kdjdpfxjcxxpqs Abcsi rapid traverse Y-axis:6 m/min rapid traverse Z-axis:5 m/min feeds x/y/z -stepless:2 - 3000 mm/min total power requirement:9 kW weight of the machine ca.:2,6 t dimensions of the machine ca.:2,6 x 1,8 x 2,2 m

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: M08L/8716, Offer Number: M08L/8716 Machinetype: 7 die - 7 blow warm forming header Info: bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer Make: NATIONAL FORMAX PLUS Type: FXP57S WF Constr. year: 2016 Ksdpfxswi Sulo Abcedi diameter range: 14-22 mm number of dies: 7 number of stations: 8 cutting length: 4-67 mm shaft length under head: 4-75 mm output - pieces/min: 175 press power: 200(126) to max. outside dia. of round pie: 42 mm stroke: 150 mm Location: In our warehouse

Condition: new, Year of construction: 2025, Complete sample system for a water production plant to do 3.000 cycles per hour. Including Blow Molding Machine (with 4-cavity blow molding machine, air compressor, air dryer group, chiller, blow mould), Bottle Feeding Table, Automatic Rinsing/Filling/Capping Machine, Cap Feeding Machine, Lamp Inspection Box, Drying Device, Automatic Label Shrinker Machine, Code Spraying Machine, Automatic Wrapping Machine, Conveyor System. Way of production: Bottle blowing > bottle rinsing > bottle filling > bottle capping > lamp inspection > labelling > thermo shrinking > code spraying > wrapping. - Specifications: 3000 cycles/h (at 500ml); bottle volume: 350-1500ml; PET bottles; standard 28/30mm PET caps; 1500 liter of water filling /hour; 500 liter of water for rinsing per hour, gravity filliing, 24 bottles in a multipack. - Specification depending on final layout and customized combination of machines/modules. Kdedpfx Ajv Nla Ajbcji Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Automatic water filling system for up to 18.000 bottles per hour. - Including feeding system for empty bottles to the 40-head rotary rinser. - Rotary filling station (40 heads) with gravity filling principle. The capping unit is working with 12 capping heads and is suitable for 28 and 30mm PE standard caps. - All product contacting parts are made of SS304 or standard food package plastic. - The frame is made of high quality carbon steel Q235 (optional SS304). - MITSUBISHI PLC, WEINVIEW Touchscreen, Specifications: productivity 6.000-18.000 bottles per hour, number of rinsing heads: 40, number of filling heads: 40, 12 capping heads, bottle volume: 350-2000ml, bottle diameter: 50-90mm, bottle height: 150-310mm, filling tolerance: +/- 2%, compressed air: 0.5m³/6bar, filling water: 9m³/h, rinsing water: 3m³/h, power: 380V, 7.5kW, machine dimensions: L4300xW3400xH3050mm, 12.000kg. Kdodpfsv Nlaisx Abcoi Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Automatic water filling system for up to 4.000 bottles per hour. Including feeding system for empty bottles to the 18-head rotary rinser. Rotary filling station (12 heads) with gravity filling principle. The capping unit is working with 6 capping heads and is suitable for 28 and 30mm PE standard caps. All product contacting parts are made of SS304 or standard food package plastic. The frame is made of high quality carbon steel Q235 (optional SS304). MITSUBISHI PLC, WEINVIEW Touchscreen. - Specifications: max. speed of the machine in neutral: 66 cycles/minute; number of rinsing heads: 18, number of filling heads: 12, 6 capping heads; bottle volume: 350-2000ml; bottle diameter: 50-90mm; bottle height: 150-310mm; filling tolerance: +/- 2%; compressed air: 0.5m³/6bar; filling water: 1.5m³/h; rinsing water: 0.5m³/h; power: 380V, 3.5kW; machine dimensions: L2700xW1600xH2800mm; weight: 2.500kg. Kdodpfxsv Nlacs Abcoi Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, z-travel:380 mm y-travel:400 mm x-travel:500 mm tool taper:SK 40 vertical head swivelling:beidseitig 90 Grad table-size:LxB 700x425 mm dimensions of the machine ca.:2x2x2 m quill stroke:60 mm groove width:14H7 mm Kdedpecxxmqofx Abcoi flute distance:63 mm weight of the machine ca.:2 t total power requirement:10 kW Speed range of live tooling:5 - 3000 min -1 Loading:max. 250 kg clamping slots:6 power capacity - milling spindle:5,5 kW

Condition: as good as new (ex-display), A manual demonstration bending machine WIEGAND Bending length: 2020 mm Kodpfx Aepgmq Uebcjdi bending capacity: 1,0 mm max. bending angle: 0 - 135 weight: 325 kg option: Rolling shear Cutting capacity of the shear: cutting length: 1600 mm Sheet thickness up to 400N/mm² strength: 0,8 mm Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: like new (used), Year of construction: 2010, The machine comes from the Daimler Benz technical center and has 150 operating hours. X 650 mm Y 500 mm Z 450 mm Table size 1,100 x 600 mm Table load 450 kg Spindle speed range 6,500 rpm Spindle taper SK 40 Tool changer 24 positions Control system Siemens 840 D Kjdpfx Aetdfbmsbcjdi Total power 20 kW Machine weight 5,500 kg Bm9zrnafs87 Space requirement (W x D x H) 2.3 x 3.1 x 2.3 m Condition: very good

Condition: used, Year of construction: 2002, x-travel 400 mm y-travel 320 mm z-travel 440 mm table-size 80 x 325 mm spindle taper ISO Sk 40 spindle turning speed range 63 - 3150 U/min Ksdpfjw Tdxiox Abcedi quill stroke 60 mm weight of the machine ca. 1,5 t dimensions 1,8 x 1,8 x 1,9 m Universal Milling Machine - Digital Display - Hydraulic Tool Clamp - Central Lubrication - Coolant System - Machine Light - Machine Feet - Counter Bearing - Chip Tray

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength? Aggregate chassis made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering? Wabco Smartboard? electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment)? 1st + 3rd axle separately liftable with traction aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension Tires and wheels 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel + approx. 120 kg) Seatposts Aluminum drop supports, Made of aluminum alloy, 2 - 10 tonne support load, we use swivel feet for air suspension Brake system according to E.E.G. standard, dual-line braking system, EBS E - system Wabco with RSS system (roll stability support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical system according to the STVZO guidelines with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear end, 24 volt system with lx 15-pin and 2x 7-pin socket, with side contour lights in LED design, 2 work lights at the rear, 2 LED work lights on the side at the height of the seat supports, 1 LED work light inside at the front left can be operated from the outside Kdodogcw Rijpfx Abcei Structure/trough "structure fully welded inside" Front wall load 17,250 dkn? Rear and side walls 10,250/13,400 dkn aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside ! ! , floor as moving floor system laid on 140 mm aluminum cross beams, floor stacker load approx. 7 ton/m2 cross beams mounted accordingly closely (approx. 350mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design smooth rear wall in straight design with 2 aluminum wing doors 50/30mm thick with 4 rotating rod locks in the welded aluminum rear frame fixed in Teflon bearing and stainless steel bearing. ,running aluminum wall suspended in the reinforced aluminum top belt with "Kevlar tarpaulin" for complete emptying, side brush seal and additional Kevlar tarpaulin on the side, integrated discharge funnel with folding cover plate in the floor closure, operable from the outside on the left at the back, viewing window on the left at the back, 1 test slider in each of the rear doors, so 2 pieces, service door on the left in the front wall Hydraulic system "Cargo Floor" 24 board system - smooth design! Push floor system in the floor with hydraulically moved aluminum profiles mounted on aluminum square profiles with approx. 880 PE-HD sliders, approx. 8mm floor thickness, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, power supply at the rear left with cable operation in a lockable waterproof box, without hydraulic hoses Accessories PVC mudguard with rubber mud flaps, aluminum spare wheel holder, side

Condition: used, Year of construction: 1985, x-travel 500 mm y-travel 500 mm z-travel 350 mm Kjdpfetv Ia Tox Abcedi table surface area 800 x 450 mm spindle taper: ISO 40 quill stroke mm feed - longitudinal/cross mm/min feeds vertical mm/min turning speed range max. 3150 U/min voltage 380 V / 50 Hz power capacity 4 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, • new set of bevel gears,

Condition: used, TECHNICAL DETAILS - table dimensions : 350 x 800 [mm] - T-slots : 7 - strokes, x, y, z : 400, 400, 370 [mm] - spindle speed : 50 - 2240 [rpm] - feed speed of potentiometer : 0 - 630 [mm/min.] Kdedpfx Abouhbxascsi EQUIPMENT - 3 axis display HENDENHAIN - steel sheet retention

Condition: excellent (used), Year of construction: 2016, operating hours: 6,459 h, lifting height: 5,500 mm, fuel type: diesel, mast type: duplex, gearing type: automatic, fork length: 1,200 mm, color: orange, Year of manufacture: 2016 Empty weight: 9.820 kg Lifting capacity: 7.000 kg Maximum passing height: 3.750 mm Technical condition: very good Visual appearance: very good Please contact Arie or Pedro for more information = Additional options and accessories = Kedpfxoycullo Abcsdi - Twin wheel axle

Condition: used, total height: 1,850 mm, total width: 1,200 mm, total length: 1,300 mm, Empty weight: 1.050 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Horizontal/vertical: Horizontal and vertical - Power [kW]: 3.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 400 Kedpjx Hiibsfx Abcsdi - Y-axis travel [mm]: 300 - Z-axis travel [mm]: 400 - Table length [mm]: 750 - Table width [mm]: 300 - Tool holder: SK40 - Main spindle power [kW]: 2.2 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 1600 - Options: Digital readout - └ Type of digital readout: Heidenhain - Transport dimensions: 1300mm x 1200mm x 1850mm (l x w x h) - Transport weight [kg]: 1050kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, Year of construction: 2014, empty load weight: 512 kg, total length: 4,020 mm, fork length: 1,200 mm, load capacity: 3,485 kg, Accessories Load center: 600 Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: None Condition: Ready for use and fully functional Technical condition: Very good Kdodpfxswikayj Abcei Description: 2x forks: 150 x 50 x 1,200 mm 2x forks: 150 x 50 x 1,200 mm

Condition: excellent (used), Year of construction: 2020, Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: SEW-Eurodrive, servo geared motor with brake -Type: WF37 CMP50M/BK/DI/PK/AZ2Z/SD1 -Motor: Speed: 4500 / max: 9000 rpm -Gearbox: i= 18.94 -Shaft: Ø 20 x 40 mm -Protection class: IP65 Kdodsxt D Hxjpfx Abcei -Brake: 2.4 Nm -Technical data: see photo of the nameplate -Number: 7x geared motors available -Price: per piece -Dimensions: 455/180H170 mm -Weight: 10.5 kg/pc.

Year of construction: 2020, operating hours: 6,000 h, condition: excellent (used), functionality: fully functional, Fully Automatic Paper Bag Making Machine for Sale – WFD-550 Fully automatic paper bag making machine, model WFD-550, manufactured in 2020, available for sale. The machine is in good working condition and was used in production for only 2 years. It has been regularly maintained and operates reliably. Main features: - Production of paper bags with twisted handles - Production of paper bags with flat handles - Fully automatic feeding and forming process - Stable and efficient operation The machine is suitable for industrial production and can be used for manufacturing shopping bags, packaging bags, and other paper products. Kdodpfoyuf T Rjx Abcoi Condition: good technical condition, ready for operation. Price: negotiable For serious inquiries, please contact by email.

Condition: new, functionality: fully functional, feed length X-axis: 590 mm, feed length Y-axis: 180 mm, feed length Z-axis: 320 mm, Powerful universal milling machine UWF 80 E designed for professional craftsmen and specialists. Equipped with two spindles – horizontal and vertical. Large clamping table surface of 1000 x 240 mm, additionally tiltable within a range of +/-45°. Automatic feed for X and Y axes. Swiveling head +/-90°. 3-axis digital display. Schneider Electric electrical system. ISO 40 taper. Features: - Capability for both vertical and horizontal milling – extends the application range - Milling table tiltable by 45° to the right and left - Quiet operation with ball bearings ensures excellent concentricity - Easy spindle speed adjustment - Swiveling milling head from -90° to +90° - Large clamping table area: 1000 x 240 mm - Automatic feed for X and Y axes, including rapid traverse for X axis - Milling: spindle feed set via handwheel - Drilling: spindle feed set via feed lever - Quick-switching clutch between automatic and manual spindle feed - Right and left spindle rotation for thread cutting - Dovetail guides - Precision cross table with T-slots - 3-axis digital display included Technical specifications: - Table size (width): 1000 mm - Table size (depth): 240 mm - Spindle taper: ISO 40 - Spindle speed min: 115 rpm - Spindle speed max: 1750 rpm - Horizontal spindle speed min: 60 rpm - Horizontal spindle speed max: 1350 rpm - Speed change – number of steps/stepless: vertical – 8, horizontal – 9 - Quill stroke: 125 mm - Travel in X axis: 590 mm - Travel in Y axis: 180 mm - Travel in Z axis: 320 mm - Spindle to table distance: 0 – 375 mm - Spindle to column min. distance: 230 mm - Spindle to column max. distance: 685 mm - Table swivel: -45° to +45° - Milling head tilt: -90° to +90° - Automatic feed X axis: (8) 32 – 700 mm/min - Automatic feed Y axis: stepless mm/min - Number/size/spacing of T-slots: 16 mm - Motor power: 1.5 kW - Motor power S1 100%: 0.85 kW - Second spindle motor power: 1.5 kW Kjdpfxjytfcvo Abcodi - Dimensions (width): 1500 mm - Dimensions (depth): 1430 mm - Dimensions (height): 2100 mm - Weight approx.: 980 kg Scope of delivery: - 3-axis digital display ES 12H - M16 drawbar - LED lighting - Coolant system - Automatic table feed for X axis - Automatic table feed for Y axis - Reducing sleeve ISO 40 / MT3 - Reducing sleeve ISO 40 / MT2 - Reducing sleeve ISO 40 / B18 - Long milling arbor 27 mm - Horizontal support - Legally required safety covers - Full technical documentation (DTR) in Polish - CE certificate - 24-month warranty for all components at no extra charge

Condition: used, axle configuration: 1 axle, first registration: 02/1965, total length: 11,100 mm, total width: 2,500 mm, total height: 1,700 mm, suspension: steel, tire size: 164/16R0, wheelbase: 9,800 mm, color: other, Year of construction: 1965, Number of axles: 1, twin tires, payload: 22,525 kg, unladen weight: 8,475 kg, gross weight: 31,000 kg, chassis type: complete chassis, chassis material: steel, kingpin size: 2 inches, suspension type: full air, body year: 1965, low-loader type: semi low-loader, loading platform length: 670 cm, gooseneck length: 280 cm, axle type: BPW Kdedpfxjyr Dhho Abcei = Further information = General information Cab: day cab Registration number: OL-60-83 Driveline Fuel type: diesel Transmission Transmission: manual Axle configuration Tire size: 164/16R0 Brakes: drum brakes Suspension: leaf spring Axle 1: twin tires; left inner tire tread: 3 mm; left outer tire tread: 8 mm; right inner tire tread: 15 mm; right outer tire tread: 11 mm Weights Curb weight: 8,475 kg Payload: 22,525 kg Gross vehicle weight: 31,000 kg Environment Emission class: Euro 0 Condition General condition: fair Technical condition: fair Optical condition: fair Damages: none = Company information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good prices • Reliable business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The assurance of “recognizable quality” • And more… Visit our website for special offers and a complete stocklist: Leasing with Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask us directly about our European warranty packages.

Condition: good (used), Year of construction: 1983, functionality: fully functional, Universal Production and Tool Milling Machine Type: UWF 700 PH Machine No.: 5670 Serial No.: 034650 Year of manufacture:1983 Control system: Positioning and path control incl. display HEIDENHAIN TNC 135 3-axis manual input control TECHNICAL DATA Working area X-axis (longitudinal) manual/automatic: 410/390 mm Y-axis (transverse) manual/automatic: 310/290 mm Z-axis (vertical) manual/automatic: 400/380 mm Quill travel vertical: 63 mm Clamping surface, vertical: 830 x 224 mm Number of T-slots: 4 Angular table clamping surface: 700 x 285 mm 6 T-slots: 12 H8/45 mm Workpiece weight: 200 kg Distance table – spindle nose (vertical): 0 – 515 mm Distance table – spindle center (horizontal): 30 – 565 mm Drive power (at 1500 rpm): 2.2 kW Speed range: 45 – 2000 rpm Number of speeds: 12 Speed progression (geometric steps): 1.4 Tool holder (DIN 2079): ISO 40 Feed range (all axes): 2 – 1500 mm/min Rapid traverse (all axes): 1.5 m/min Operating voltage: 380 V/50 Hz Machine dimensions: 1.2 x 1.6 x 1.7 m Space required: 2.1 x 2.1 m Kdjdpfxjx Ry Ato Abcsi Machine weight: 1100 kg EQUIPMENT / ACCESSORIES  Hand operation and CNC program control  Vertical and horizontal machining  Swiveling vertical milling head  Adjustable-angle vertical milling head  Various tool holders  Manual quill feed (vertical)  Angular table 700 x 285 mm  Coolant system  Coolant and chip tray  Electrically secured chip guard in work area  Mounting elements  Machine lamp  Documentation Condition: Control system overhauled, workshop tested

Condition: ready for operation (used), Year of construction: 1990, Immediately available ex location: CNC Tool Milling Machine Hermle Type UWF 700 Year of manufacture: 1990 Heidenhain TNC 145 Table: 700 x 280 mm Travel X/Y/Z: 410/310/400 mm SK 40 Drive: 2.2 kW Kdodpfxsyvy U Tj Abcei Hydraulic tool clamping Spindle speeds: 40 – 2000 rpm Quill stroke: 63 mm Rapid traverse in all axes: 1.5 m/min Drive: 2.2 kW Tool holders, vise Weight: 1.5 t Price: EUR 2,750.—plus VAT ex location

Condition: good (used), Grinding diameter 3-40mm Length of drill unlimited Point angle 40-180mm Point thinning device Dressing attachment Kedpfxsgy Ti De Abcedi MARCELS MASCHINEN CH

Condition: not inspected (used), Year of construction: 1986, functionality: unexamined, machine/vehicle number: 7393, travel distance X-axis: 500 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 4,000 rpm, controller model: Siemens 810, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 360 mm Travel Z-axis: 400 mm Spindle speed range: 20 – 4,000 rpm Table size: 800 x 390 mm Feed rate range: 1 – 2,000 mm/min Rapid traverse: 5 m/min Number of T-slots: 6 T-slot width: 14 mm T-slot spacing: 63 mm Tool holder: SK 40 Number of gear steps: 4 MACHINE DETAILS Kdedpoyv A A Hofx Abcei Control system: Siemens 810 Total power requirement: 9 kW Dimensions & Weight Space requirements (L x W x H): approx. 2,500 x 2,900 x 1,900 mm Machine weight: approx. 2,000 kg