Used Wide Belt for sale (13,919)

Condition: excellent (used), Year of construction: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 - 13 m/min Feed motor output: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st unit: Steel contact roller, diameter 160 mm Motor output: 15 kW, 400 V, 50 Hz 2nd unit: Combination unit with rubber-coated contact roller (Sh 65), rigid sanding shoe Motor output: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd unit: Cleaning brush Multi-function display Multi-function lever (conveyor belt, workpiece thickness adjustment) Electronic belt oscillation Pneumatic conveyor carpet oscillation Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Units with emergency braking system Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta start Complete documentation Giedpfxoychqzj Albeu Note for used machines: • Specifications and prior sale subject to change. • Stated prices are ex works – loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machine on site. • Special agreements are only possible in written form. (We only respond to inquiries providing your address and telephone number!)

Condition: like new (used), Year of construction: 2013, operating hours: 250 h, Wide-belt sanding machine Bütfering Type: SWT 315/C Optimat Year of manufacture: 2013 Working width: 1350 mm Feed rate: 2.5 – 13 m/min, adjustable via frequency converter 1 combination unit with steel contact roller, with three options: - infinitely variable, frequency-controlled cutting speed 2-18 m/s, - calibration sanding with profiled contact roller - veneer and lacquer sanding - one electro-pneumatic segmented pressure bar with 25 mm segmentation - protected storage area on the machine for storing additional sanding pads - adjustable sanding belt blowing device, 5-stage adjustable, application-optimized cleaning results with low compressed air consumption Technical data: Working width: 1350 mm Sanding belt width: 1350 mm – 1380 mm Belt change side: left Workpiece thickness: 3 – 160 mm Operating voltage: 400 V / 50 Hz Drive motors: Unit: 20 kW Total connected load: approx. 23 kW Extraction nozzle: 1 x Dm 180 mm (unit) Extraction volume: approx. 1,830 m³/h BL 1 (1350 MM) BELT LENGTH 2150 MM Sanding belt length: 2150 mm UPGRADE TO MPS 1 Design of the segmented pressure bar as an electromagnetic segmented pressure bar MPS with program-controlled, current-controlled adjustment of the sanding pressure of each individual sanding segment, with 2 buttons per actuator in a 25 mm grid VAKIX 1/2 (1350 MM) VACUUM INTEGRATED (T3) High-performance fan for connection to a prepared vacuum clamping device with a 3 kW fan, nozzle diameter: 160 mm Extraction volume: 940 m³/h Giedpfx Ajzb Ikxelbju FBM (1350 MM) FINISHING BRUSH Driven finishing brush on the outfeed side of the machine Nozzle diameter: 140 mm Extraction volume: 1100 m³/h ATA 2 (1350 MM) SUPPORT TABLE, FOLDABLE Support table approx. 900 mm long with an integrated roller at the outfeed (foldable) Machine weight: 2800 kg

Condition: excellent (used), CATALOG NUMBER 7857 Technical data: - Maximum workpiece width: 1100 mm - Maximum workpiece height: 160 mm 2 sanding units: – From above: - Rubber pressure roller, smooth 1) Calibrating grooved rubber roller - Rubber pressure roller 2) Grooved rubber roller + pad + metal roller - Rubber pressure roller - Total unit power: 15 kW – From below: - 3 driven rubber feed rollers - Feed belt - 3 driven rubber feed rollers - Sanding thickness potentiometer - Pneumatic belt oscillation Gsdpfx Alezabifobjiu - Table elevation: electric + manual (for precise adjustment) - 2 feed speeds - With pneumatic brake - Working pressure: 6-8 bar - Extraction port diameter: 2 x 140 mm - Overall dimensions (L/W/H): 1650 x 1960 x 2100 mm - Weight: 1250 kg ADVANTAGES – Not repainted – Czech production – 2 sanding units – Original operator’s manual (DTR) – Used sander, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price calculated at exchange rate: 4.2 PLN/EUR (Price may change if the exchange rate fluctuates significantly)

Condition: used, Year of construction: 1994, Max. passage height: 160 mm Sanding belt length, unit 1: 1900 mm Max. working width: 1350 mm Number of belts: 2 Gijdpfoy Naq Uox Albsu Belt, unit 1: Calibrating roller, grooved, rubber design Unit 1: Steel, grooved Sanding belt width, unit 1: 1350 mm Unit 2: Combination sanding unit Design, unit 2: Roller/shoe Control: Manual control panel, electric/pneumatic Belt oscillation: pneumatic Infeed height: fixed (top section moves) Table stroke: electro-mechanical Table display: mechanical numerical display Working height or feed table height: 900 mm Location: Nattheim

Condition: like new (used), Year of construction: 2021, operating hours: 30 h, functionality: fully functional, machine/vehicle number: AE00002612, grinding width: 1,350 mm, overall weight: 6,250 kg, grinding height: 170 mm, working height: 170 mm, table height: 900 mm, workpiece height (max.): 170 mm, The machine has only been in use for a few hours and is practically brand new. It is in perfect working order. See below for the full specifications: DMC system T5C 1350 PF170-4M Lifting unit for a fixed work table, 900 mm from the ground * Working thickness: 3 to 170 mm BL 16 Infeed panel with reading bar for 'epics' sectioned pads, pitch 16 mm, or with PWM3 POSITION 01 TIE-5000 Working unit for an extractable internal cross pad PE 16T 'EPICS' sectioned electronic sanding pad, pitch 16 mm Working pressure control of the sectioned pad via the Pro-Sand control system Motor driven by an inverter, power up to 15 kW POSITION 02 DO 19 Oscillating unit fitted with 19 rotating 125 mm disc brushes 1.1 kW main motor driven by an inverter Independent motor for controlling the oscillating movement Electronic auto-set for the unit Sliding movement with motor driven by an inverter POSITION 03 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 04 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Gjdezcmcvepfx Albeiu Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 05 SC-2620 Operating unit for a superfinishing pad Sanding belt rotation against the conveyor feed direction Electronic sanding belt swing control Disc brake ◦ Chevron belt dimensions: 1370 x 2186 mm ◦ Sanding belt dimensions: 1370 x 2620 mm PE 16/C 'EPICS' sectioned electronic sanding pad, pitch 16 mm 16 mm center-to-center distance of sectors Double-action pneumatic cylinders with adjustable push/counter-push Graphite cloth with quick extraction device Total management of its functionality by the "Pro-Sand" electronic control Working pressure management of sectioned pad via the Pro-Sand control system Timed oscillating clearing blowers 15 kW motor driven by an inverter OUTSIDE THE MACHINE SB/U 200 Outfeed working unit for abrasive cloth-coated rollers, diameter 200 mm Roller rotation against the conveyor feed direction / Manual adjustment of the roller working position / Abrasive cloth-coated roller, diameter 200 mm, 'Ultra Fine' type with silicon carbide fibers / 2.2 kW motor / Side oscillation of the brush roller OTHER DEVICES Perforated worktop and conveyor belt with a vacuum motor powered by an inverter up to 7.5 kW, integrated into the machine frame Front supporting worktop equipped with five idler rollers Rear supporting worktop equipped with five idler rollers 4 kW feed belt motor driven by an inverter Console with integrated PC "eye-M" and "Maestro Pro-Sand" electronic control with Tele Service system 1999 working programs / Virtual keyboard for fast settings of the machine / Production report / Interactive trouble-shooting program and self-diagnosis of the electronic cards / Display of electric and pneumatic diagrams / Display of the user manual, spare parts catalog, electric and pneumatic diagrams Vision panel door positioned on the service side Internal LED lighting for the machine

Condition: used, Colour: Grey Wide belt sander SCM Sandya 10S M2 110 Built in 1999 Sanding belt dimensions 2620x1115mm 380V 1st sanding unit Contact roll 180mm Engine 18.5kW 2nd sanding unit Combi aggregate with sanding pad Engine 11kW Sanding width max 1100mm Sanding height Min/max 4/170mm Throughput speed 4.5-9 m/mins Dimensions 2300x2205x2500mm, weight 1850kg - Documentation available: No - CE certificate present: No - Number of units [pcs]: 2 - └ Unit 1: Gjdswnh A Aopfx Albeiu - - Type of unit: Contact roller - - Roller diameter [mm]: 180 - - Motor power [kW]: 18.5 - └ Unit 2: - - Type of unit: Combi - - Sanding belt length [mm]: 2620 - - Sanding belt width [mm]: 1115 - - Motor power [kW]: 11 - Max. working width [mm]: 1100 - Min. working height [mm]: 4 - Max. working height [mm]: 170 - Min. feed speed [m/min]: 4.5 - Max. feed speed [m/min]: 9 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), working width: 1,350 mm, HESEEMANN LSM8 Gsdpfsxcg Scsx Albjiu

Condition: excellent (used), VG M-300 belt sander Giodezc Iidspfx Albsu sanding width 300mm, 1 unit (rubber roller), base, 5.5KW motor. two feed speed settings, manual table adjustment, oscillation, the sander is fully ready for operation.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width: 1,350 mm, Costa calibration machine with two sanding belts and a cutterhead for milling Gedpowmxh Tofx Albjiu

Condition: excellent (used), WIDE BELT SANDER BUFFERING SKO 213 CC sanding width 1320 MM 1 combined unit with a metal calibration roller and a sectional platen, 15 KW 2 combined unit with a rubber roller and a sectional platen, 7.5 KW Speed of the second unit adjustable via a frequency inverter Minimum current protection 40A pneumatic oscillation The belt has a connection for a vacuum pump Feed speed adjustable via a frequency inverter, 2.5-13 m/min electric height adjustment pneumatic centering of the feed belt Max. sanding height 150 mm The sander is very robust and provides very good sanding quality. Godszcx D Eepfx Alboiu

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Gjdpfx Aley T Irhjbjiu Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7910 TECHNICAL DATA - Max. working width: 1350mm - Max. working height: 150mm – From above: - Rubber pressure roller I unit (metal grooved roller for calibration) II unit (two smooth metal rollers + sequential sanding pad) - Rubber pressure roller - Cleaning brush – From below: - Infeed roller, metal - Feed belt Gsdpfx Aljy T Ip Tjbsiu - Outfeed roller, metal, slip type - Pneumatic belt oscillation with photocell control - Electric table lifting - 2 feed speeds: 2–14m/min - Main motor: 5.5/15 kW - Brake - Grinding height potentiometer - Feed motor: 0.75kW - Working pressure: 8 bar - Extraction nozzle diameter: 200mm, 120mm - Dimensions (L/W/H): 1860x2200x1980mm - Weight: 1995kg ADVANTAGES – German-made – Unpainted – DTR technical documentation included – Used sander, in very good condition Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR rate (Prices may change with significant rate fluctuations)

Condition: ready for operation (used), Year of construction: 1994, Wide Belt Sander HEESEMANN KSM 8 CSD incl. EA2 Year of manufacture: 1994 Gedpfx Alex N A Aasboiu Condition: Used - ready for operation Description Wide Belt Sander Condition: Function tested – Working width: 1300 mm – Cross sanding unit with belt blowing device – Longitudinal sanding unit with infinitely variable speed and belt blowing device – Calibration roller, can be engaged via the control system – Vacuum conveyor belt – feed speed infinitely variable – Satin finishing roller – Brush roller – Machine settings and pressure control system CNC controlled - EA dedusting machine, high-pressure blow-off unit with rotating nozzles and ionization for statically charged dust Location: ex stock 54634 Bitburg - Immediately available - Free loaded

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. Intermediate Lacquer Sanding Configuration Special price for exhibition machine - showroom model - - Robust, space-saving wide belt sander for the highest standards - Constant working height due to upper part adjustment - Working width: 1350 mm - Overhead sanding, with 2 sanding units - Serrated rubber contact roller in proven hardness - Infinitely variable height adjustment of the contact roller according to grit scale - Electric lifting/lowering of the contact roller depending on unit selection - Electronically controlled segmented sanding pad - Entire sanding pad unit tiltable by 10° - Parallel spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between the sanding units and at the outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized precision height adjustment with digital readout - Belt tension, control, and oscillation pneumatically operated Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum system for the entire working table with additional perforation of 200 mm for smaller workpieces - Automatic thickness setting across the entire working width - Workpiece over-thickness protection with instant feed stop and lift-off automation - Stepless adjustment of material removal Gjdpok Dpp Ssfx Albeiu - Electronic feed control on operator panel, infinitely variable 3 - 15 m/min - PLC control with teach-in memory - Pneumatic conveyor belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: fully automated quick setup and feed activation - Eco energy saving mode - Error diagnostics - Pass-through height 210 mm up to 18.5 kW - Sanding belt size 1350 x 2000 mm Perfect - Features: High-quality swiveling Plexiglas control panel - 10'' touch screen - Industrial control system - Automatic pressure regulation and storage of sanding pad elements - Electronic compensation for sanding belt grit size - Job and operating hours counter Lacquer Equipment: - Infinitely variable sanding belt speed on 2nd unit - Cleaning nozzles for the sanding belt of the 2nd unit, controlled by use - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with this machine: Fold-down outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air blow-off with fan Location: 54634 Bitburg - Immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 "Z" Designation for RTC 135 5257452 Vacuum table with electric fan 3 kW 5257453 Oscillating belt air-blast device for 5257454 Oscillating belt air-blast device for 5257462 Reinforced motor 15 kW (20 HP) 5257485 Roller table at infeed and outfeed for 5257499 Grooved rubber pressure roller, 2nd position 5257500 Grooved rubber pressure roller, 3rd position 5257504 Infinitely variable conveyor feed with inverter 5257605 Door with inspection window 5257606 LED lamp for internal illumination TECHNICAL DATA Dimensions and Weights Length (product) approx. 1800 mm Width/depth (product) approx. 2000 mm Height (product) approx. 2070 mm Extraction Connection Number of extraction ports: 2 Extraction port diameter: 200 mm Electrical Data Feed motor power: 0.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Height adjustment motor power: 0.25 kW Output power (motor power): 11 kW Sanding Unit Sanding belt length: 2150 mm Sanding belt width: 1370 mm Max. sanding width: 1350 mm Feed Unit Feed speed: 4.5 / 9 m/min Workpiece Min. workpiece height: 4 mm Max. workpiece height: 170 mm Product Information EU 2023/2854 Type of generated data: usage data Format of generated data: common, machine-readable formats, e.g., JSON Data volume: up to 5 MB Continuous real-time data generation: yes Godey Ehiwepfx Albjiu Data storage location: on the device and a remote server Data access: on the device and via physical and wireless interfaces Location: ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, Compact wide belt sander with combined sanding unit Action equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers with infeed and outfeed - Automatic table positioning with push button Item number: 5222100A2 Also for smaller craft workshops for occasional use Combination sanding unit with sanding shoe for fine sanding As standard with angular grooved steel roller Ø 120 mm for calibrating Fine adjustment of the working height Clearly arranged control panel on the front side Robust tube-stiffened monoblock steel machine body, robot-welded, working units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Gedpfx Aljgf Sw Nobeiu Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of or behind each working unit Pneumatic belt tensioning for each unit with decimal correction option for grain size / belt thickness Universal use for solid wood and veneer thanks to combination unit Entry model for smaller companies Working width 950 mm Equipment details Combination unit for calibrating and grinding Angled steel roller Ø 120 mm with fine height adjustment Hard grinding shoe with graphite support Universal design for calibrating

Condition: new, Year of construction: 2026, CASADEI Libra 35 - Wide belt sanding machines in two belt version immediately available - ex stock 54634 Bitburg Technical data grinding width 1100 mm Min. / max. working height 4 /170 mm Sanding belt width 1115 mm grinding belt length 1900 mm feed speeds 4,5 / 9 m/min feed motor 0,33/0,55 kW Table adjustment motor power 0,25 kW Drive motor power 11 kW Electrical voltage 400 V Phase(s) 3 Ph Gjdpfocr S Ecex Albjiu Mains frequency 50 Hz Length 1650 mm Width/depth 1820 mm Height 1960 mm Illustration with optional equipment Wide belt sander as double belt version up to 1100 mm with many equipment options for the price-conscious craftsman's workshop Robust tube-stiffened monoblock steel machine body with working units mounted high up for maximum rigidity User-friendly due to clear control panel on the front side Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start for main motor Natural rubber feed carpet with negative profile Support table with two rollers in the infeed and outfeed of the feed carpet Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front and behind each working unit Pneumatic belt tensioning for each unit with decimal correction possibility of the core/ belt strength Quality - Made in Europe Execution RTC 1. aggregate with bevelled steel roller Ø 120 mm and fine adjustment for calibration 2. aggregate combination aggregate with fine adjustable working height for calibrating and fine grinding with rubber coated roller Ø 120 mm (45 Sh) and hard grinding shoe with graphite coating on exchangeable insert Scope of delivery: Working table height adjustment with electronic display of working height. Oscillation of the sanding belts with electronic system Rubber coated grooved pressure roller at the infeed 1° position with anti-reverse device (C.E.) Star-delta start-up of the main motors Grooved steel calibration roller Selector switch for positioning the grinding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic carpet centering Location: Ex stock Bitburg - at special price

Condition: good (used), Year of construction: 2001, * 5 grinding units: - 1 bottom 18.5 kW - 2 lower 15 kW - 3 upper 18,5 kW - 4 upper 15 kW - 5 upper 11 kW Gsdpfx Alet Hmg Iobeiu * stepless feed regulation on inverter (2x2.2kW) * electric adjustment of table height * pneumatic oscillation * grinding belt blowing

Condition: good (used), SCM Sandya Uno Wide Belt Sander Working width: 900 mm Working height: 3–160 mm Number of sanding units: 2 Unit with rubber roller Combi unit with pad Main motor power: 11 kW Pneumatic oscillation Giodpjy Sr Rrefx Albsu Abrasive belt dimensions: 930×1525 mm Two feed speeds: 4.5–9 m/min Machine dimensions: 1560 x 1280 x 1920 mm Weight: approx. 1100 kg

Condition: used, Technical details: Working width: 1700 mm Gisdpsu Ng R Hsfx Albou Workpiece thickness max.: 150 - . 4,0 mm grinding belt dimensiones: Umlauf mm machine dimensions LxWxH: 4,8 x 2,7 x 2,35 m For woodworking!!!!! pneumatic conveyor guide height adjustment via hand wheel EMERGENCY STOP switch - grinding rolls adjustment - band clamping device - roller conveyor ( infeed and outlet each L: 2800 x W: 1700 mm each with6 pc Rolls) motoric driven - operation via control panel - worpiece thickness min./max. 4,0/150mm - grinding belt width 1300mm - grinding belt support length / width: 1700/1350mm ON SALE AS IS without electric cabinet, because machine was operating in a production line with other machines and one electric cabinet! Machine won't be connetcted! *

Condition: used, For sale: ENORM PRIMO – TOP CONSTANT THICKNESS MACHINE / automatic head positioning Wide-belt calibrating and fine-finishing machine Combination unit: contact roller and pneumatic sanding pad Enormatic Digital thickness display for workpiece thickness Band drive motor power approx. 9 kW Contact roller pressure adjustable in infinitely variable steps according to grit scale Infeed table and outfeed table with roller supports Working width 1100 mm Feed rate 2.5 - 15 m/min Gijdpfx Alsy Tutrjbou Machine is WORKSHOP REFURBISHED available from stock in Lieboch

Condition: excellent (used), Year of construction: 2013, operating hours: 1,395 h, Calibration and fine-tuning machine, wide-belt sanding machine Kundig Brilliant with electronic segment sanding shoe, adjustable sanding unit and finish sanding. A video of the machine in operation can be sent upon request. Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of painted surfaces. Edge banding machine with combination unit and electronic segmented pressure bar. Edge segments can be switched on and off. Gjdpfx Aoyxg N Nslbsiu Segment width of the pressure bar 22mm (ideal for intermediate sanding of painted surfaces). Pneumatically adjustable calibration roller, grooved, rubberized roller with grit compensation. Drive motor 11kW. Infinitely variable sanding speed 3 - 15 m/s via frequency converter. Belt feed speed infinitely adjustable from approx. 3 to 15 m/min. Belt blowing device controlled by workpiece. Constant table height of approx. 950mm by adjusting the upper part of the machine, allowing it to be integrated into sanding lines. Feed belt is still in good condition and has good grip. Carpet with adjustable vacuum blower, allowing small parts to be securely held. Maximum sanding width approx. 1100mm. Workpiece height approx. 3.5 to 200mm. Sanding belt dimensions 1120 x 2000mm. Infeed roller table and outfeed roller table. Hood locking. Extraction connection 1 x 180mm, 1 x 125mm. Terminal control with 45 programmable sanding programs for automatic machine control. Parameters: belt speed, feed speed, workpiece height, belt blowing nozzle, vacuum blower, adjustment of the calibration roller and the parameters of the segment sanding shoe. Thickness measuring system with adjustable chip removal and Enormatic with automatic thickness adjustment with feed activation, eliminating the need for constant measuring with a caliper. Programs for different sanding tasks can be stored and selected via smartselect. CE marking. Operating manual. 2 sanding inserts included. The four bellows have been renewed. Without the illustrated connecting cable. Original paint, only a few spots have been touched up. Very good condition from a small company. Machine has approx. 1395 operating hours, i.e. approx. 2 hours per week. Dimensions approx. 1900 x 1650 x 2150mm (L x W x H). Weight approx. 2300kg. With a large, mobile storage table at the height of the belt, for storing the sanding belts. Table size approx. 1520 x 1360 x 950mm. Including various sanding belts from K80 to K400. The machine can be demonstrated on site after arranging an appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Condition: used, Year of construction: 1986, Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Shoe unit 1st roller diameter: 100 1st unit design: steel roller/shoe 2nd unit: roller/shoe 2nd roller diameter: 100 2nd unit design: steel roller 3rd unit: roller/shoe 3rd roller diameter: 100 mm 3rd roller design: grooved steel roller 3rd unit sanding shoe: electronic individual elements Cleaning brushes: Yes Paint sanding possible: Yes Belt blow-off: Yes Vacuum carpet: Yes Giodjvvki Nspfx Albju Storage location: Nattheim

Condition: used, Year of construction: 1997, Number of belts: 1 belt, max. clearance height: 150 mm, max. working width: 1100 mm. 1st unit: Combination unit. 1st roller diameter: Steel roller. 1st unit design: Roller/shoe unit. 1st sanding shoe design: Electronic individual links. Segment width: 50 mm. 1st sanding belt length: 1900 mm. 1st sanding belt width: 1120 mm. Motor: 1 kW. Feed speed: 4 and 8 m/min. 2nd unit: Dust brush. Approx. weight: 2000 kg. Dimensions: 1800 x 1450 x 2120 mm. Storage location: Nattheim Giedpfx Aevvkkaolbju

Condition: good (used), Code: 0424 Brand: DMC - ITALY Model: EUROPA 120 Automatic 2-belt calibrating sanding machine for wood, furniture, furnishings, wooden frames, doors, panels, composite materials and various Technical data: Sturdy construction Max working width mm 1200 Max working height mm 170 Abrasive belt size mm 2200 x 1250 1° Group Rubber Calibrating Roller - Diameter mm 220 - Adjustable workpiece holding pressure brackets - Motor Hp 20 2° Group Finishing Pad with adjustable pressure - Motor Hp 10 Abrasive belt cleaning blowers Belt feed speed variator from 3,5 to 17,5 mt/min Vacuum table - Motor Hp 7,5 Automatic table lifting Automatic table positioning N° 2 suction inlets diameter mm 200 Gjdpsv A Ta Dofx Alboiu Working pressure 7 bar Overall dimensions mm 1900 x 1800 x 2100 h Weight kg 2500