Used Wire Bending Machines for sale (67,079)

Condition: good (used), Bending tool, die, lower knife, lower tool, lower jaw Dodpfjcn Shusx Agmeuw -Tool: for swivel bending machine -Widthen: for lower cheek -Dimensions: 59 x 19 mm -Length: 1452 mm -Weight: 10 kg

Condition: good (used), Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm Duedpfoyb R Ndsx Agmew -Weight: 1200 kg

Condition: used, Swivel bending machine, edge bench, gutters, roof gutters, beading machine, beading machine Dedpfx Aedy Rhdogmjuw -Max. Working width: 1280 mm -Max. Sheet thickness: 1.75 mm -Opening width: 180 mm -Clamping via: threaded spindle -Bending angle adjustable via: stop -Dimensions: 1850/600/H1240 mm -Weight: 380 kg

Condition: used, Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine Dujdpjcx T E Rjfx Agmjw -Spare part top roller -Drawing with the pictures -Max. Sheet width: 2060 mm -Max. Sheet thickness: mm -Roller diameter: 141 mm -Bearing diameter: 75 mm -Transport dimensions: 2690/141/H141 mm -Weight: 290 kg

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm Djdpfxoin Rn Ae Agmsuw -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Condition: good (used), Bending tool, die, lower knife, lower tool, lower jaw -Bending tool: from Lotze HDZK swivel bending machine -Widthen: for lower cheek Dodpfxoip Eqks Agmouw -Dimensions: 2487 x 100 x 15 mm / 190 x 100 x 15 mm -Hole spacing: 100 x 18 mm -Transport dimensions: 2487/100/H30 mm -Total weight: 29.4 kg

Condition: good (used), Reinforcing steel bending machine, shaft bending machine, round steel bending machine Dodpjyb R Akefx Agmeuw -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1140 kg

Condition: excellent (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Roll bending machine: 3-roll roll bending machine, electrically driven -Bending adjustment: electric Djdpfx Agsywzlpemjuw -Max. sheet width: 2040 mm -Max. sheet thickness: 4 mm -Roller diameter: 150 mm -Dimensions: 1080/2880/H1370 mm -Weight: 1770 kg

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 7300 € 140.89 € 10 to 185 mm 150x8 mm 450x900 mm 150 mm 60 mm 10 mm/s 10 mm/s 1.1 kW 915 mm 900 mm 450 mm 1130 mm 250 kg Stroke adjustment with digital display Dodoynmzcspfx Agmjuw Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 12900 € 247.68 € Dujdpfxjwiq N Is Agmjw 40 to 285 mm 200x24 mm 660x1250 mm 250 mm 80 mm 10 mm/s 10 mm/s 4 kW 930 mm 1250 mm 650 mm 1250 mm 1100 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: new, Year of construction: 2026, Electric bending machine for bending pipes and profiles, bars and flat bars depending on the rolls - bending stones used. The machine is additionally equipped with mechanical pressure on the upper roll with vernier. Ideal for bending curves, circles, spirals, etc. Complete with foot pedal for left/right drive control. Used in locksmith shops and on construction sites. Max pipe bending range up to 30 mm. The bending machine allows working both vertically and horizontally. Machine characteristics Electric bender for bending profiles and pipes. The bender allows working in both vertical and horizontal planes. The machine is equipped with mechanically adjustable pressure on the upper roll. Ideal for bending curves, circles, spirals. Bending radius adjustable by means of top pressure device with vernier scale. Application: Bending of profiles and tubes Different profiles can be bent by means of universal rollers Very high unladen weight for optimum stability Ground and hardened directional rollers on the sides, Bending rollers made of robust and hardened steel Operation via foot pedal Vertical and horizontal operation Left/right operation Standard equipment Side guide rollers Dusdpfxeu Snlko Agmow foot pedal Driver's manual in Polish CE declaration Technical data Round tube [mm] 30 x 1 Rectangular profile [mm] 30 x 30 x 1 Round bar [mm] 16 Solid rectangular piece [mm] 30 x 10 Shaft diameter [mm] 30 Rotation [rpm] 9 Motor power [kW] 0.75 kW Power supply 3 phase, 400V Dimensions (L x W x H) [mm] 1200 x 750 x 1210 Weight [kg] 252

Condition: excellent (used), Year of construction: 2018, operating hours: 2,379 h, X,Y,Z Travels 350mmx 250mm x 250mm U, V Travel ±45 Taper angle/height ±30 Max. Part dimensions 820mm x 680mm x 250mm Max. Part Weight 400kg Speed of axis movement (XYZ) 6mm/min Anti-collision protection for axes X,Y,Z Wire Diameter Range 0,1mm-0,3mm Dimensions of complete equipment 1750mm x 2.470mm x 2.200mm Total weight of equipment without dielectric 2.500kg Equipped With: AC Cut HMI Control W/ 19" Touchscreen Control Dsdpfeygc Szex Agmjuw IPG-V Generator with HMI2 Control Auto Wire Threading Submerged Glass Scales Chiller Transformer

Condition: used, functionality: fully functional, YEAR 1990 Power rating 15 kW Shaft diameter ø 120 mm Roller diameter ø 400 mm Resistive moment Cm 333 Cm3 IPN capacity 240 x 106 mm Dedpfx Ajummkaogmouw Capacity HEB 120 x 114 mm Capacity Pipe wall thickness x Ø 139 x 5 mm Capacity flat 125 x 25 mm Hydraulic / Mechanical Hydraulic

Condition: used, functionality: fully functional, Year of construction: 2000, control type: CNC control, roller (bottom) diameter: 210 mm, roller (top) diameter: 205 mm, side roll diameter: 170 mm, roller length: 1,100 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, power: 5.5 kW (7.48 HP), Equipment: cone bending device, emergency stop, hardened rollers, 4 – Roll bending machine Manufacturer: STÖLTING, Type: VB 322 Year of manufacture: 2000 Technical data Manufacturer: STÖLTING Type: VB 322 Year of manufacture: 2000 Bending length: 1100 mm Sheet thickness: 12 mm Bending allowance: 8 mm Upper roll diameter: 205 mm Lower roll diameter: 210 mm Side roll diameter: 169 mm Main motor: 5.5 kW Weight: approx. 3200 kg Dedpozgf Rxjfx Agmouw Equipment • CNC control • Conical bending device • Operating manual All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, GF AgieCharmilles CUT 300 Year of manufacture: 2012 Charmilles Millenium control system Travel ranges (X / Y / Z): 550 x 350 x 400 mm Travel ranges (U / V): 550 x 350 mm Max. conical angle: +/- 30° at a height of 400 mm Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed of 340 mm²/min Best surface finish: Ra 0.2 µm Dujdszgt R Hepfx Agmow Available wire diameters: 0.15 mm to 0.33 mm Dimensions of the complete system: 2600 x 2540 x 2240 mm Total weight of the system: 3300 kg After receiving your order, we will clean and overhaul the machine and test all functions. You will receive a warranty of 6 months on the machine. We would be happy to offer you the commissioning of the machine.

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress VP2 Year of manufacture: 2014 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in the bath) / 450 (without the bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on the X and Y axes for increased precision Available wire diameters: 0.15 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER handheld control box for convenient setup AGIE IPG-V generator with power module Dujdpfxszgt N Ao Agmsw AGIEVISION control system Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg After receiving your order, our machines are cleaned and completely overhauled. Subsequently, a test cut is performed to achieve the best possible surface finish for acceptance. You will receive a 6-month warranty on the machine. We would be happy to offer you on-site commissioning and training.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress V2 Year of manufacture: 2007 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel range: +/- 70 mm Maximum taper: 30° at 100 mm height Dusdpfxozgt Ixe Agmsw Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface finish: Ra 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on X and Y axes for enhanced precision Available wire diameters: 0.20 – 0.33 mm Submerged-type machine with automatic wire threading and automatic re-threading after wire break Manual front door (accessible from one side) Includes AGIEJOGGER hand-held pendant for convenient setup AGIE IPG generator with Power Module AGIEVISION control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and completely overhauled after receipt of order. Afterward, a test cut is performed with the finest surface finish for approval. You will receive a 6-month warranty on the machine. We are happy to offer on-site commissioning and training.

Year of construction: 1994, condition: ready for operation (used), Operating wire diameter: approx. 0.05-4 mm, max. feed stroke: 100 mm, cut length: 5-4000 mm, minimum cut length: 5 mm, max. output: 500 parts/min, max. wire speed: 50 m/min. An on site inspection is possible. Dsdpfjzkvmxsx Agmouw

Condition: used, Year of construction: 2003, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 180 mm, CNC wire EDM machine Fanuc, type Robocut Alpha O I B, year of manufacture 2003. Travel of XY axes: 320 x 220 mm. Travel of UV axes: plus/minus 60 mm. Z-axis adjustment: 180 mm. Clamping area: 530 x 360 mm. Maximum workpiece height: 180 mm. Internal space: 70 x 430 mm. Maximum workpiece weight: 500 kg. Dujdpfxsyankpj Agmjw

Condition: new, Year of construction: 2026, shaft diameter: 80 mm, Profile bending machine AHB 80 - Electro-hydraulic ring/profile bending machine - Hydraulic adjustment of lower rollers - Lower rollers can be adjusted individually - Three driven rollers - Segmented rollers - Digital display - Touchscreen - Hardened rollers and standard rolls - Hydraulically adjustable side straightener - Can be used horizontally and vertically - Mobile control panel - CE marking / Declaration of Conformity Dusdpfjqxcy Hjx Agmow Roller diameter 80 mm, hardened Fully hydraulic Motor 400 Volt 50 Hz 3-phase Weight approx. 1,700 kg Dimensions 1340 x 1390 x 1640 mm

Condition: used, Year of construction: 1995, total length: 2,900 mm, total width: 1,000 mm, total height: 1,400 mm, Colour: Green Empty weight: 4.500 kg Price: On request - Year: 1995 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 34010 HV - Drive system: Conventional - Drive: Hydraulic - Vertical/Horizontal: Horizontal - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 15.0 - Shaft diameter [mm]: 135 - Moment of resistance [cm³]: 120 - Top roll diameter [mm]: 390 - Bottom roll diameter [mm]: 390 - Capacity diameter round [mm]: 90 - Options: 3D rolling, Digital readout, Extra rolls - Transport dimensions: 2900mm x 1000mm x 1400mm (l x w x h) Djdpfx Aozhbhcsgmsuw - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1989, Machinetype: barbed wire machine Make: VITARI Type: MFS Constr. year: 1989 line wire diameter: 1,6-2,8mm point wire diamter: 1,6-2,5 mm Dedpfx Aew N D Suogmjuw output – meter/min: 27-47 distance of barbs: 50-150mm Excellant condition

Year of construction: 1993, condition: reconditioned (used), year - 1993 / 2020 complete reconditioned with new PLC Management tube diameter max. 100 mm Dedpfoiau Uuox Agmouw wall thicknes - 10 mm pull up length of tube - 6000 /12000 mm Mandrel pipe bending up to 4 mm pipe wall thickness and pipe bending without mandrel from 5.0 - 10 mm pipe wall thickness accuracy of bending angle ± 0,2 ° total power requirement - 50 kW weight of the machine ca. 6 t

Condition: used, Year of construction: 1989, Model - 600/6 Year - 1989 Dies suitable for drawing low carbon steel wire rod entry diameter 5.5/6 mm max. They are two mirror dies and one has 5 steps and the other 6 steps. All with 600 mm shooting capstans. They both have a vertical skein for winding yarn onto loops. DC electrical equipment included. Duodpjyubh Rsfx Agmjw The dies will be sold in their "used, working, seen and liked" condition.

Condition: excellent (used), Year of construction: 1995, Combination Unit: Duodpor Nfvmefx Agmsw Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight