Used Wire Bending Machines for sale (66,844)

Condition: new, functionality: fully functional, Year of construction: 2021, For sale: Brand new, never-used DAVI bending machine. *MAIN FEATURES MCP 18* *1. Type and Capacity* - *3 hydraulically driven rollers*, pyramid configuration - *Shafts Ø 180 mm* → this is the "18" in MCP 18 - *Bending*: round, square, rectangular tubes, angles, flat bars, UPN, IPE, HEA... all b235 profiles *2. Indicative capacities on MCP series* DAVI does not provide the exact MCP 18 datasheet online, but for the equivalent MCP range: Profile Approx capacity MCP 18 Round tube Ø 6" to 8" depending on wall thickness Solid square 80x80 mm to 100x100 mm Angle 120x120x12 mm UPN UPN 200 - 240 IPE flat flange IPE 200 - 240 Kjdpoy N Rbwjfx Ai Eolt Actual figures depend on wall thickness and steel grade. The 18 cm Ø shafts make this a mid/high-category machine. For all available options, please refer to the photo in the listing.

Condition: good (used), Year of construction: 1991, 3-roll plate bending machine Plate width: 3000 mm Plate thickness: 20 mm Kjdpfsy Rm T Sjx Ai Eelt Pre-bending: 16 mm Top roll diameter: 380 mm Side roll diameter: 340 mm

Condition: good (used), Year of construction: 2005, control type: CNC control, Tube diameter: 30 mm Kjdpfoy Rm Nysx Ai Eolt Wall thickness: 2 mm Max. bending angle: +/- 180 + 10 ° Tube insertion length: 4100 mm - Round steel tube up to 30 x 2.2 mm² - Round stainless steel tube up to 30 x 1.5 mm - Square tubes 20 x 2.5 mm - Bending time for 90 degrees: 1.5 sec. (feed) - Longitudinal feed speed: 450 mm/sec. - Maximum bending radius: 125 mm - Freestanding bending head, 850 mm long - Bending axis drive: electrohydraulic

Condition: used, Year of construction: 2018, operating hours: 4,882 h, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, total height: 3,390 mm, total length: 3,590 mm, total width: 4,200 mm, wire diameter (max.): 0.3 mm, overall weight: 6,600 kg, For sale is a used Sodick ALC800GH in very good condition Kljdpfx Aoy R S N Eoi Eet

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Equipment: fridge, AGIECHARMILLES CUT 30 WIRE EDM MACHINE, YEAR OF MANUFACTURE 2011 TRAVEL: X 600, Y 400, Z 350, U/V ±50 MM MAXIMUM TAPER: 25°/80 MM AUTOMATIC THREADING AND RE-THREADING RE-THREADING HEIGHT: 350 MM WIRE SPOOLS UP TO 25 KG WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS COOLING UNIT TEST CUT POSSIBILITY Klsdpfxey Tw Tbo Ai Est

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, AGIECHARMILLES CUT 2000 AWC WIRE EDM MACHINE (DOUBLE HEAD) MANUFACTURED IN 2012 TRAVEL: X 350, Y 250, Z 256, U, V +- 70 MM MAXIMUM TAPER: 30º/100 MM LINEAR GUIDES AUTOMATIC THREADING AND RE-THREADING DOUBLE HEAD Kledey Twkaepfx Ai Eet OPTION TO WORK WITH 0.05 AND 0.07 MM WIRES ACCEPTABLE WIRE RANGE: 0.05 - 0.33 MM AGIEVISION 5 GENERATOR SUPERFINISH MODULE FOR FINISHES UP TO 0.05Ra RE-THREADING HEIGHT: 220 MM COILS UP TO 8 KG WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, AGIECHARMILLES CUT 300 SP WIRE EDM MACHINE, YEAR OF MANUFACTURE 2014 FIXED TABLE TRAVEL: X 550, Y 350, Z 400, U 550, V 350 MM MAXIMUM TAPER 30°/400 MM LINEAR SCALES AUTOMATIC THREADING AND RE-THREADING Kedjy Twg Uepfx Ai Eolt RE-THREADING HEIGHT 400 MM WIRE SPOOLS UP TO 16 KG RESIDUAL WIRE CUTTER WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, AGIECHARMILLES CUT 200 MS WIRE EDM MACHINE, YEAR OF MANUFACTURE 2015 MS MACHINE (TEMPERATURE-CONTROLLED) FIXED TABLE TRAVELS X 350 Y 250 Z 220 U 350 V 250 MM MAXIMUM TAPER 30°/220 MM LINEAR SCALES AUTOMATIC THREADING AND RE-THREADING RE-THREADING HEIGHT 220 MM WIRE SPOOLS UP TO 8 KG RESIDUAL WIRE CUTTER Kodpfx Aoy Twf Roi Eelt WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Kodpstr U Hljfx Ai Eolt Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage Klodpfsttah Rox Ai Est → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, High-precision wire EDM machine GF CUT 1000 Year of manufacture: 2018 Travel ranges (X/Y/Z): 220 x 160 x 100 mm Travel ranges (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Wire diameter from 0.05 mm to 0.20 mm Best achievable surface finish: Ra = 0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER hand control unit for convenient machine setup 15" LCD color display with lift keyboard and mouse AGIEVISION control system Kedpfsy E Intox Ai Eslt Includes AGIESETUP 3D Includes AGIEDUO dual-wire system for automatic changeover between two wire diameters Machine dimensions: 1400 mm x 1900 mm x 1970 mm Machine weight: 2700 kg The machine has been cleaned, overhauled, and thoroughly tested by our specialists. We are happy to commission the machine at your facility and provide training on the control system and machine operation.

Year of construction: 2003, condition: ready for operation (used), A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible. Klodpfx Ajy R Dtcei Eot

Condition: used, functionality: fully functional, Year of construction: 2016, Combined profile and tube bending machine Manufacturer: Italy For round tubes up to 48 mm 1st station for ring bending for large radii 2nd station for tube bending up to max. 180 degrees Electrically driven Motor: 1.1 kW, 400 V, 50 Hz, 3-phase With digital display Klsdpfx Aisy Ryfnj Est With foot pedal With tooling for 42.4 mm tube, radius approx. 150 mm Weight approx. 350 kg

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, pressing force: 32 t, working height: 200 mm, controller model: Siemens 840D, working length: 2,150 mm, TECHNICAL DETAILS Bending length: 2,150 mm Maximum bending height: 200 mm Minimum length/width between bends: 160–350 mm Pressing force: 32 t MACHINE DETAILS Kjdpfsy D Ihwex Ai Eolt Control: Siemens 840D Dimensions & Weight Dimensions (L x W x H): 8,500 x 7,000 x 2,850 mm Weight: 30,000 kg EQUIPMENT Automatic tool changer Manipulator Reverse bending cycle Sheet centering system Additional top tools Loading and unloading system

Condition: used, Year of construction: 2007, Wire EDM machine Sodick AQ537L, year 2007, with low operating hours. It is equipped with a total operating hours counter (powered-on hours), which shows approximately 4,500 hours. Of these, about 70% are actual wire EDM machining hours, equating to roughly 3,100–3,500 true working hours. Kodpfxey Rxtks Ai Eelt

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 18,972 h, machine/vehicle number: 363/11, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 150 mm, working width: 1,500 mm, sheet thickness (max.): 5 mm, TECHNICAL DETAILS Max. sheet thickness: 5 mm Max. working width: 1,500 mm Diameter of upper roll: 130 mm Diameter of lower rolls: 150 mm MACHINE DETAILS Control: CNC Drive: Hydraulic Kjdpoy Hhwqofx Ai Eelt Number of rolls: 4 Number of driven rolls: 4 Dimensions & Weight Dimensions (L x W x H): 3,700 x 1,200 x 1,200 mm Transport weight: 2,000 kg Transport packages: 2 Operating hours: 18,972 h EQUIPMENT Cone bending CE marking

Condition: used, functionality: fully functional, Minimum steel tube diameter: 10 mm Maximum steel tube diameter: 76.5 mm Minimum wall thickness: 0.8 mm Maximum wall thickness: 5 mm Kljdpfx Aioy Rkr Ss Eet Minimum internal bending radius: 40 mm Maximum average bending radius: 400 mm Useful length with positioner: 3500 mm Comes with a set of dies

Condition: good (used), You are bidding on: a branded folding machine from a very reputable and well-known manufacturer - Schechtl Device features: Schechtl KSV folding machine – reinforced model Rail bends cleanly Angle display Bending length just over 2m Sheet thickness 1.5 mm – suitable for aluminum, zinc, etc., more than 2 mm possible Standard rail - radius for aluminum, zinc is also available as an option Round rolls as shown in the picture Optional: depth stop 500, additional rails Schechtl guillotine shear Useful length 2m Sheet thickness 1.5mm – more for aluminum Depth stop 500 mm Extendable sheet support Optional: additional accessories and tools available, such as bead forming device, tube bars and holders, tools, etc. Matching manual guillotine shear also available, please request a price for the set if interested, I will then configure it for you. Important! Optionally, you can find and purchase many machines and machine accessories, such as various rails, depth stops – everything related to sheet metal and steel processing like folding machines, guillotine shears, drilling machines, round bending machines, slitting and profiling machines, accessories (beading device, round rolls for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers, all in the shop. I am always available for questions. You will receive an invoice with VAT shown separately. Klsdpfx Aey Rtb Asi Eet Free loading possible – weight approx. 950 kg and approx. 1000 kg Inspection and testing are possible and welcome by telephone appointment. Payment in cash on collection. Take advantage of our experience and expertise, we are happy to advise you. Collection by the buyer (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97261 Güntersleben Item number: Folding machine KSV / Guillotine shear MT

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: manual, overall weight: 1,370 kg, total length: 2,880 mm, total width: 1,450 mm, total height: 1,100 mm, warranty duration: 12 months, Equipment: documentation/manual, Metal Technics Polska Professional CNC machines, lasers, and metalworking equipment Kedpfx Aoy Htk Nei Eolt We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe, and Asia—used by hundreds of companies across Europe. For over 15 years, we have focused on quality, precision, and reliability. SHEET METAL BENDING MACHINE – SEGMENTED BENDING MACHINE 2.5 × 2040 Technical Specifications: Working width: 2040 mm Max. sheet thickness: 2.5 mm Bending angle: 0° – 135° Dimensions: 2880 × 1450 × 1100 mm Weight: 1370 kg Machine Description: Rigid and durable steel construction Long operating levers enabling high force transmission Segmented clamping fingers on upper and lower beam for flexible bending lengths Counterweights on operating levers to reduce effort Eccentric clamping system for secure sheet holding Upper and lower beam made of high-quality steel

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Klsdjwkaalspfx Ai Ejt Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 410 mm, controller model: Fanuc Alpha 180is-WB, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified deadline, by 08.06.26! TECHNICAL DETAILS Workpiece weight: 1,000 kg Travel distance X-axis: 550 mm Travel distance Y-axis: 370 mm Travel distance U-axis: 410 mm Travel distance V-axis: 120 mm Travel distance Z-axis: 120 mm Maximum cutting angle: 30° Number of axes: 5 Rapid traverse X-axis: 900 mm/min Rapid traverse Y-axis: 900 mm/min Rapid traverse U-axis: 450 mm/min Rapid traverse V-axis: 450 mm/min Rapid traverse Z-axis: 900 mm/min MACHINE DETAILS Control system: Fanuc Alpha 180is-WB Kjdpey Nmxxsfx Ai Eelt Operating hours: approx. 32,000 h Machine weight: 3,100 kg EQUIPMENT Automatic wire threading Note: Sale does not include the monitor above the control unit.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2013 Travel ranges: X= 500 mm, Y= 350 mm, Z= 256 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Ksdpfxjy Ed Eno Ai Eolt Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.33 mm (incl. KIT 50) Submerged-type machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Includes automatic wire changer AWC (use of 2 wire spools) Includes Conic-Plus option Includes Fast-Threading option Includes Smart-Threading option VISION 5 control system AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine has been thoroughly cleaned, overhauled, and extensively tested. A laser measurement of the axes was performed in-house. We are happy to carry out an individual test on the CUT 3000 for you. Including user training at Techma on your overhauled machine Optional services we offer: - Transport - Commissioning - Chiller - Clamping devices - Consumables

Condition: like new (used), Year of construction: 1998, Technical Data: 2 hydraulically adjustable rollers 3 driven rollers Display with digital readout Bending moment: 110 cm/3 Shaft diameter: 180 mm Roller diameter: 460 mm Main motor power: 15 kW Dimensions (L x W x H): approx. 2400 x 2000 x 1600 mm Weight: approx. 7.8 t Accessories: Various tools Kledpfx Aijy Rxuzs Eet Condition: Very good, almost as new The seller assumes no liability for typing or data transmission errors. The machine complies with its age in terms of appearance, technology, and wear; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 1994, sheet width 2550 mm plate thickness 10.0 mm ST Kljdpfx Asy Ez A Rei Est pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 7.5 kW weight 4500 kg range L-W-H 5000 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: like new (used), functionality: fully functional, Year of construction: 2015, The Sahinler HPK 80 profile bending machine is a heavy-duty hydraulic section bender with 3 driven rolls for precise bending of steel profiles, tubes, and box sections. The machine is suitable for industrial use in steel construction and mechanical engineering, offering a robust build with high bending capacity and reliable repeat accuracy. Klsdpoy Rrh Isfx Ai Est