Used Wire Coiling Machine for sale (67,566)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Kodpfx Afow Ucyue Hsdt Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: excellent (used), Year of construction: 2016, X-axis: 550 mm Y-axis: 350 mm Z-axis: 400 mm Max. workpiece dimensions: 1,200 x 700 x 400 mm Max. workpiece weight: 1,500 kg Machine weight: 2,850 kg Kedpszcpifsfx Af Hsdt Cutting range: 30 degrees on 400 mm Includes operating manual. Machine can be inspected while powered on.

Condition: like new (used), Year of construction: 2008, operating hours: 1,120 h, Controller ARISTECH (similar as FANUC) Number of axes: 4 Table size 640 x 470 mm X Axis Travel 425 mm Y Axis Travel 300 mm Z Axis Travel 250 mm Max workpiece size 800 x 600 x 250 mm U Axis Available:standard Weight cca 3000 kg Dimensions LxWxH = 1860 x 2050 x 2100 mm The machine consist of following units 1. EDM machine 2. Controller cabinet 3. Water tank and pump 4. Water cooler 5. Transformer 6. Transformer Nr.2 (power supply) The machine was barelly used. Still unter power. It will be due to company liquidation. Kdsdpevvl Uaefx Af Hjt

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: J20M0260A, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Kedpfx Afszu N Abj Hodt Travel range X-axis: 500 mm Travel range Y-axis: 350 mm Travel range Z-axis: 300 mm Travel range U/V: ±60 mm Workpiece size: max. 1,050 × 800 × 295 mm Workpiece weight: max. 1,500 kg Available wire diameters: 0.10–0.30 mm MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 2,200 × 2,500 × 2,150 mm Machine weight: 3,700 kg EQUIPMENT Automatic wire threading

Condition: ready for operation (used), Year of construction: 1988, Control: FANUC Kdjdpfxexx Uatj Af Hst Travel: X= 500, Y= 350, Z= 300 mm Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Weight: 3,000 kg

Condition: used, Year of construction: 1992, functionality: fully functional, RENZ Wire Closer Kdedszzyw Ajpfx Af Hjt Model CLE 70 Year 1992 CLE 70 electric spiral crimping device: Electric crimping via foot pedal Binds up to 34 mm (340 sheets) in one cycle Efficiency approx. 400 cycles/h depending on the type and format of the material Foot-operated cycle start allows positioning the material with both hands Supports spirals with a diameter of 3/16” – 1 1/2” regardless of pitch Quick settings of various spiral diameters in just a few seconds Quiet operation. The device does not require a compressor.

Condition: excellent (used), Year of construction: 2003, Sodick AQ535L wire EDM machine Year: 2007 5-axis Technical details: X-axis travel of 550 mm Y-axis travel of 350 mm Z-axis travel of 300 mm U/V axis: 80/80 mm Work table size is 790 x 500 mm, Maximum workpiece weight capacity of 800 kg Work tank dimensions (W x D): 1100 x 720 mm Distance from floor to table top: 1005 mm Workpiece capacity: Maximum workpiece height: 290 mm Wire system: • Taper angle: 20° / 80 mm • Wire tension: 300 g to 2300 g • Max wire feed speed: 250 mm/sec Kdjdpfx Afszqzznj Hjt • Max wire spool weight: 6 kg • Dielectric tank: • External dimensions (W x D x H): 640 x 2400 x 1843 mm • Empty weight: 350 kg • Capacity: 730 L

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW Kdjdpjin Rn Aofx Af Hst -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Condition: used, Year of construction: 2014, Mitsubishi MV 2400 S wire EDM machine Year of manufacture: 2014, available from the end of August. Kedpfxozuvyao Af Hsdt

Condition: used, Year of construction: 2015, Agie Charmilles Cut 300 SP Wire-Cut EDM. Serial No. 591.063.002.0159 (2015). Country of Origin: Switzerland Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Kdsdpsz Ar Agofx Af Hst Lot 2 of Auction 3505

Condition: used, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on site for loading. Kjdpfezy Uk Isx Af Hedt For sale is a wire erosion machine manufactured by AGIE, model: Agietron Integral 3.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 24,731 h, functionality: fully functional, machine/vehicle number: W120273, Wire EDM machine Makino DUO43 Year of manufacture: 2011 Travel ranges (X/Y/Z): 450 x 300 x 320 mm Travel ranges (U/V): +/- 101 mm Kdjdpszudqyjfx Af Hst Max. workpiece dimensions: 710 x 560 x 300 mm Max. workpiece weight: 800 kg Available wire diameters: from 0.10 to 0.30 mm Max. spool weight: 16 kg The machine was recently in operation at our customer's site and can be inspected while powered on.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 820 mm, warranty duration: 6 months, Equipment: documentation/manual, GF AgieCharmilles CUT E350 Year of manufacture: 2015 Wire EDM machine with automatic wire threading Travel ranges (X/Y/Z): 350 x 250 x 250 mm Travel ranges (U/V): +/- 45 mm Taper / height: 30° at a height of 77 mm Max. workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Excellent surface finish for carbide/steel: 0.12/0.18 µm (Ra) Standard wire guides: 0.20 or 0.25 mm User-friendly AC CUT HMI 2 control interface Kdodpezucliefx Af Hot Operation via 19" TFT touchscreen Machine dimensions: 1750 x 2470 x 2200 mm Total weight without dielectric fluid: 2525 kg After receiving the order, we will clean, service, and thoroughly test the wire EDM machine. We can also perform a test cut or an on-site inspection under power beforehand. We can also handle commissioning and training. We offer the following options: - Transport and installation - Cooling unit - Clamping devices - Wire / filters / resin

Condition: good (used), Year of construction: 2005, Machine is in good working condition. Kjdpfxsw Rqu Ss Af Hjdt

Condition: used, Year of construction: 2002, Travel ranges: Kdjdozumk Nspfx Af Het X 350 mm Y 220 mm Z 220 mm Automatic rethreading Coolant bath without cooler

Condition: ready for operation (used), Used and fully functional RMG 89 wire drawing machine: Max. diameter: 14 mm. Capstan diameter: 900 mm. Kdjdpfx Afjzx Riko Hst Drawing force: 3,850 kg. Motor: 18.75 kW Speed: 21.25 m/min. Weight: 2,000 kg.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, GF AgieCharmilles CUT 2000 Oiltech Year of manufacture: 2012 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg Kdjdpfjztp Emex Af Hst AGIE IPG-VO generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.30 mm including option KIT 70 Water bath machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Includes AGIEJOGGER hand box for comfortable setup VISION 5 control 15" LCD color screen, jog control panel and mouse Includes AGIESETUP 3D Includes Fast-Threading option Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. A customized test cut is also possible. We also offer commissioning and on-site training for this machine.

Condition: used, Year of construction: 2012, Travel range: X 750mm / Y 500mm / Z 400mm, max. workpiece dimensions X/Y/Z: 1050mm/750mm/400mm, max. workpiece weight: 1500kg, Kdsdezt Rg Sspfx Af Hjt wire diameter range: 0.15mm - 0.3mm. Machine dimensions X/Y/Z: approx. 2100mm/2800mm/2350mm, weight: approx. 5300kg. Available for immediate delivery.

Condition: repair required (used), Manufacturer: FANUC Type: A04B-0221-B201 The condition of the machine is unknown; it is not functioning. It is being sold in its current condition. !! Kdjdsik Hb Tspfx Af Hst We do not know what the problem is!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 1,000 m/min, table load: 1,000 kg, Equipment: compressor, fridge, FANUC Robocut α-C600iB Kdjdpfx Afszlc Tbj Hst

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Charmilles Robofil 440 CCS Year of manufacture: 2011 Kdsdpfezruvujx Af Hst Charmilles Millenium control system Travel distances (X / Y / Z): 550 x 350 x 400 mm Travel distances (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed of 340 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Dimensions of the complete system: 2600 x 2540 x 2240 mm Total weight of the system: 3300 kg After receiving your order, we will clean and completely overhaul the machine and test all functions. You will receive a 6-month warranty on the machine. We would be happy to offer you the commissioning of the machine.

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, Charmilles Robofil 440 CC Year of manufacture: 2004 Charmilles Millenium control system Travel distances (X / Y / Z): 550 x 350 x 400 mm Travel distances (U / V): 550 x 350 mm Max. Taper angle: +/- 30° at a height of 400 mm Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Dimensions of the complete system: 2600 x 2810 x 2240 mm Total weight of the system: 3300 kg The machine has already been tested and serviced by us. Upon request, we offer you the following services: - Commissioning of the machine at your site - Control system training Kedpfx Afozrur Ne Hjdt - Accessories such as coolers and clamping devices

Condition: used, Year of construction: 1970, für MK3 weight of the machine ca. 4 t Kdodpfxeztfzdj Af Hot

Condition: used, Year of construction: 1970, für MK3 Kjdpjztfy Tjfx Af Hsdt weight of the machine ca. 4 t

Condition: used, Year of construction: 2015, Type: LBS043 / 80 / 1.5 Coil joining machine. With Fronius Trans Tig 2200 Job G/F Arc welding machine. Pneumatic clamping. Siemens HMI touch screen control. Year of manufacture: 2015. Coil/strip width up to 80 mm. Used machine in working condition. Strip width: 15 – 80 mm. Kodpfx Ajlddxhsf Hsdt Strip thickness: 0.5 – 1.5 mm. Power: 400 V / 50 Hz. Shears on the right not included. Including operating instructions in German, schematics and packing. Delivery from stock. On stock more used machines made by Ideal, Bruderer, Schaal, Mabu, Bihler...