Used Wire Coiling Machine for sale (85,867)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 921022, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, TECHNICAL DETAILS Travel X / Y / Z: 350 × 220 × 220 mm Travel U / V: 350 × 220 mm Taper pitch/height: ±30° / 220 mm Machining type: Submerged technology Control system: Windows NT with 12" TFT screen, standard keyboard, and remote control Working area Workpiece dimensions: max. 1,000 × 550 × 220 mm Workpiece weight: max. 750 kg Table dimensions: 680 × 450 mm Tank volume: 760 l Bevel cut: max. ±30° / 220 mm Wire EDM system Wire EDM diameter: Ø 0.33 to 0.10 mm Diameter for Automatic threading: Ø 0.33 to 0.10 mm Knjdjv Ul I Djpfx Aansf Diameter for automatic rethreading: Ø 0.33 to 0.15 mm Dielectric Filter: 2 paper cartridges Dielectric temperature: ±1 °C Volume of ion exchange resin filling: 20 l Surface roughness: 0.20 µm Ra MACHINE DETAILS Dimensions (L × W × H): 2,020 × 2,050 × 2,000 mm Weight without dielectric: 2,450 kg EQUIPMENT - CleanCut high-speed generator - Integrated wire shredder - Standard interfaces (PCMCIA, Ethernet, etc.)

Year of construction: 1989, condition: used, functionality: limited functionality, machine/vehicle number: 2 2069 029, The machine is in daily use, but the electronics are somewhat unstable. Sometimes has to be started several times to remove the error message. Sometimes it does not stop but only feeds out long springs. Mechanically it is good. Makes springs from 0.8 to 5 mm. Kjdpfxoxb Rp As Aanjnf It comes with all the rollers, pins and mandrels.

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Kodpfxsr Nfvmj Aansnf Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: new, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15VWL1032, The machine includes fixtures for the production of electrical couplings in the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 900 - 1200 mm SDR26 Original MSA drawings are also included. The VWL 1200 is a CNC controlled vertical three-axis electric pipe laying machine designed for laying medium to large fittings or pipes. The machine can produce fittings typically in the 250 to 1400 mm internal diameter range (1400 mm SDR17). An optional 2-axis CNC drilling unit is available for drilling fusion indicators during the wire laying cycle or for drilling end holes during the external profiling cycle. Kedju Itk Rspfx Aanjnf The VWL 1200 uses special fixtures that clamp onto an innovative feature that is integral to the coupling design, so that there is a separate fusion zone in each half of the coupling. The process of laying the wire starts at one clamp at the end of the coupling. The wire is inserted with twice the required pitch at the end of the fusion zone, whereupon the tool system rotates and then moves in the opposite direction between the first laid pitch until it reaches the resting position at the second clamp. The process is completed at the second part of the coupling. The VWL 1200 system is designed to allow the loading and unloading of larger couplings (which can weigh up to approximately 300 kg even before the wire is inserted). The machine has a completely open top, which allows easy loading overhead using a gantry system. Alternatively, parts can be loaded through the extra wide operator's door using suitable gripping and handling equipment.

Condition: good (used), functionality: fully functional, A Thermobend 2000 is a bending machine used for bending plastic sheets such as PMMA (acrylic glass) and methacrylate. The machine operates with heating wires to heat and bend the sheets at specific locations. Kjdpfexn T Nrsx Aansnf Key features Capacity: The machine has a usable length of 2000 mm. Functionality: Can bend sheets with a thickness of 1 mm to 20 mm. Configuration: Equipped with 2 bending beams heated both from above and below. The distance between the wires is adjustable, with 3 wires above and 3 below per group. Dimensions: Length: 3200 mm x Width: 1000 mm x Height: 1600 mm Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: Margin: The listed price includes VAT (VAT is non-deductible for businesses).

Condition: used, Year of construction: 1999, functionality: fully functional, Fully functional machine. Knodpfxswmw I Ss Aansf Viewable at our Semsales premises from mid-June.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 124322, workpiece weight (max.): 500 kg, travel distance X-axis: 318 mm, travel distance Y-axis: 218 mm, travel distance Z-axis: 114 mm, TECHNICAL DETAILS X-axis travel: 318 mm Y-axis travel: 218 mm Z-axis travel: 114 mm U-axis travel: ± 48 mm V-axis travel: ± 48 mm Control system: PC-based, 14" color monitor, MS-DOS Tap pitch/height: ±30° / 65 mm Working area Type: Tray with swing door Max. workpiece dimensions (W × D × H): 1,130 × 510 × 260 mm Door width: 1,010 mm Max. workpiece weight: 500 kg Table dimensions (W × D): 560 × 440 mm Distance from floor to table: 1,050 mm Volume of the Dielectric capacity: 240 l Dielectric level control: Automatic Wire EDM system Wire diameter: 0.10 – 0.25 mm Wire guide type: Diamond-enclosed guide, zero backlash Programmable wire unwinding speed: 0.2 to 15 m/min Programmable wire tension: 0.3 to 3 daN Permissible spool weight and type (according to DIN): 1.6 kg Permissible spool weight and type (according to JIS): 3 kg Used wire recycling: Wire shredding at the rear Automatic threading for wire diameters: 0.050 to 0.300 mm Automatic rethreading for wire diameters: 0.070 to 0.300 mm Minimum threading hole diameter: 0.300 mm for 0.250 mm wire Knedpfx Aaev Tpnrsnef Dielectric Type: Deionized Water Total dielectric volume: 900 l Dielectric temperature: ±0.5 °C Cartridge filters: 16 Deionization resin volume: 30 l Deionization control: Automatic Number of deionization bottles: 3 Injection pressure range: 0 – 20 bar Number of programmable pressure levels: 16 Generator Max. processing speed (material: steel, wire: SW30X): 300 mm²/min Min. surface roughness (material: steel, height: 20 mm): 0.12 µm Ra Min. surface roughness (material: carbide, height: 20 mm): 0.1 µm Ra Available technologies: Steel, carbide, copper, graphite, aluminum, PCD, copper-tungsten MACHINE DETAILS Machine dimensions (L × W × H): 3,690 × 2,520 × 2,290 mm Weight (without dielectric): 4,400 kg Input voltage: 380/400 V Power consumption: 12 kVA

Condition: like new (used), Year of construction: 2008, operating hours: 1,120 h, Controller ARISTECH (similar as FANUC) Number of axes: 4 Table size 640 x 470 mm Ksdpevvl Uaefx Aanjnf X Axis Travel 425 mm Y Axis Travel 300 mm Z Axis Travel 250 mm Max workpiece size 800 x 600 x 250 mm U Axis Available:standard Weight cca 3000 kg Dimensions LxWxH = 1860 x 2050 x 2100 mm The machine consist of following units 1. EDM machine 2. Controller cabinet 3. Water tank and pump 4. Water cooler 5. Transformer 6. Transformer Nr.2 (power supply) The machine was barelly used. Still unter power. It will be due to company liquidation.

Year of construction: 2017, condition: like new (used), 2D Wire Bending Machime Year - 2017 Manufacturer - VIBRA Wire diameter - 1-4 mm Capacity - 30pieces/ min Power - 3,5 kw Knjdpfxemqk Tps Aanjf

Condition: ready for operation (used), functionality: fully functional, Technical Data – SENY D75B: Rolling Pressure: 220 kN Workpiece Diameter: min. 3 mm – max. 70 mm Maximum Pitch: 6 mm Knodpfxoxm Stgj Aanef Maximum Groove Pitch: 2.25 mm Maximum Roll Width: 160 mm Roll Diameter: min. 133 mm – max. 170 mm Roller Shaft Rotational Speeds: 24 – 30 – 38 – 45 – 62 – 72 – 90 – 114 rpm Roll Holder Shaft Diameter: 54 mm standard – 69.85 mm special Distance Between Shafts: min. 135 mm – max. 230 mm Working Stroke: max. 15 min Feed Rate: 0.5 mm/s – 6 mm/s Rolling Time: 0.1 s – 100 s Pause Time: 0.1 s – 100 s Main Motor Power: 5.5 kW Electrical Consumption: 8.6 kW Reservoir Capacity: 130 liters Weight: approx. 2,100 kg. Additional rolls available: M4.5 x 0.75 ISO. M6 ISO. M10 ISO.

Condition: excellent (used), Year of construction: 2021, operating hours: 537 h, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 650 mm, travel distance Z-axis: 200 mm, total height: 2,215 mm, total length: 2,820 mm, total width: 1,700 mm, wire diameter (max.): 0.2 mm, workpiece height (max.): 510 mm, workpiece width (max.): 510 mm, workpiece length (max.): 510 mm, type of input current: three-phase, overall weight: 3,220 kg, empty load weight: 3,320 kg, feed length X-axis: 650 mm, feed length Z-axis: 200 mm, feed rate X-axis: 240 m/min, feed rate Z-axis: 240 m/min, table load: 500 kg, input voltage: 400 V, working range: 510 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, tank capacity: 930 l, cutting speed: 240 mm/min, travel speed (max.): 240 mm/min, input frequency: 50 Hz, input current: 11 A, Equipment: documentation/manual, 2021 Agie Charmilles CUT AM 500 Wire EDM Machine Discover premium Swiss precision with this 2021 Agie Charmilles CUT AM 500 CNC Wire EDM Machine This high-performance wire EDM machine has only 537 erosion hours and comes from a medical device manufacturing environment, ensuring meticulous maintenance and minimal wear. Ideal for high-precision applications in medical, aerospace, automotive, and mold-making industries. Machine Overview Make/Model: Agie Charmilles CUT AM 500 Machine Type: CNC Wire EDM Machine Year: 2021 Control System: GF Control Erosion Hours: 537 hrs Condition: Very Good – ready for immediate operation Technical Specifications Work Area Max. part dimensions: 510 x 510 x 510 mm Max. part weight (base + parts): 500 kg Dielectric level (min/max): 250–305 mm Knjdpjxtfwxofx Aanjf Performance Max. machining speed: 240 mm²/min Surface roughness (Ra):

Condition: refurbished (used), Year of construction: 2007, operating hours: 15,125 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 200 mm, total length: 260 mm, total width: 280 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, type of input current: three-phase, overall weight: 3,300 kg, Charmilles Robofil 440SLP, 2007. Only 15,100 hours of work. Machine fully serviced and working. Kodpfxjv Rbxwe Aanenf Viewable at our Semsales premises in Switzerland.

Condition: good (used), functionality: fully functional, This hammering machine is a model for processing wires. The wire was sharpened on this machine. The machine has been partially overhauled. The mechanical hammer drive was completely dismantled, reworked, greased and reinstalled. The outer parts of the machine were partially refurbished. However, the electrics are old but fully functional. The motor has also been refurbished and is 1.5 KW. The machine has a hammering tool for wire sharpening included, wire diameter up to 1.5 mm. The name of the machine is unknown, but we assume it is an HMP or Felss. Kjdpfjrqfxwjx Aanjnf

Condition: good (used), Year of construction: 2003, In good technical condition and in working order. Year of construction 2003. X-axis 350 mm. Y-axis 250 mm. Z-axis 256 mm. Workpiece length: 750 mm. Workpiece width: 550 mm. Workpiece height: 250 mm. Machine dimensions: L 1670 mm x W 2040 mm, H 2305 mm. Knedpfx Aou Tq Hwjansf Machine weight approx. 2600 kg.

Year of construction: 1997, condition: good (used), Machine info: EVG Polybend stirrup machine PBE 2-16 come with 2 Pay offs - build in 1997 comes with a complete new control unit - original EVG Single wire: 6 –16 mm Twin strand: 6 –12 mm Knedpfxon Ut A So Aanjf Voltage 400 Volt 50 Hz 30 Kw Production year: 1997

Condition: good (used), Year of construction: 2005, Machine is in good working condition. Knodjw Rqu Sjpfx Aanof

Condition: good (used), Year of construction: 2005, Straight and cut machine Brand - RAVNI ( France ) Knedpjpxnv Dsfx Aanjf Min/Max wire diam. - 4- 10 mm Max cutting length - 6 meters Construction year - 2005.

Condition: excellent (used), Year of construction: 2005, operating hours: 27,000 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, empty load weight: 2,500 kg, Equipment: documentation/manual, Machine in excellent condition. Machine already cleaned. Knsdpfx Aaev Im R Tsnef Sold as is or revised on request. Machine visible in our premises in Semsales in Switzerland.

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius 1 bending tool Ø 10 mm with 16 mm bending radius Kedowhf Hfopfx Aanjnf 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: used, Year of construction: 1995, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, total height: 2,230 mm, total length: 1,800 mm, total width: 1,600 mm, workpiece height (max.): 400 mm, workpiece width (max.): 500 mm, workpiece length (max.): 850 mm, overall weight: 2,500 kg, Charmilles Robofil 310 Year of manufacture: 1995 Travel paths (X/Y/Z): 400 x 250 x 400 mm Travel paths (U/V): 400 x 250 mm Taper angle: +/- 30° at 400 mm height Max. workpiece dimensions (width x depth x height): 850 x 500 x 400 mm Max. workpiece weight: 1000 kg Collision protection on X/Y/U/V/Z axes Standard wire guides: 0.25 mm Machine dimensions: 1800 x 1600 x 2230 mm Machine weight: 2500 kg Knsdow Hxqnepfx Aansf The machine was in operation with our customer until recently and is available immediately.

Condition: good (used), Travel on X axis (longitudinal) 400 mm Travel on Y axis (transverse) 250 mm Travel on Z axis (vertical) 400 mm Knodjxbm Uzspfx Aanof Max. workpiece length 850 mm Max. workpiece width 500 mm Max. workpiece height 400 mm Max. workpiece weight 1000 kg CNC type CHARMILLES Tank length 1200 mm Tank width 700 mm Tank height 400 mm Plant closure sale: various machines, accessories, cutting tools, tool holders, vices. Please call for contact; no replies to OLX messages. Prices are net and open to reasonable negotiation. 1. Bench drill press 2. Jungner surface grinder 3. SPC 20 surface grinder 4. Surface plate (layout table) 800x500 5. MAHO 800 6. 2D dividing head, diameter 300 mm 7. 3D dividing head, diameter 300 mm 8. Tesa 700 height gauge 9. Charmilles 200 die sinking EDM 10. Charmilles Drill 11 die sinking EDM 11. Metal bandsaw

Condition: used, Year of construction: 2000, functionality: fully functional, workpiece weight (max.): 250 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,200 mm, total length: 2,300 mm, total width: 2,200 mm, overall weight: 3,600 kg, For sale Agiecut Challenge 2 spark eraser. Knjdpjvdyhqsfx Aanjf Specifications: Range of motion: X: 350 mm Y: 250 mm Z: 250 mm Controller: Agie Maximum workpiece weight: 250 kg Year of manufacture: 2000 Dimensions: Machine weight: 3600 kg Machine dimensions (H, W, D):2300x2200x2200

Condition: refurbished (used), Year of construction: 2001, NICE MACHINE REFURBISHED Kodpfx Aoxc Elheanonf

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 525 mm, workpiece height (max.): 510 mm, workpiece width (max.): 1,000 mm, workpiece length (max.): 1,300 mm, type of input current: three-phase, overall weight: 6,800 kg, Agie Progress V4. Machine available for viewing at our Semsales premises at the end of June. Machine cleaned, serviced, and tested, fully functional. Kodpfx Aswq U I Djansnf This machine is available for viewing and testing at our premises.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 331965, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, total height: 2,180 mm, total length: 1,800 mm, total width: 1,600 mm, workpiece height (max.): 200 mm, workpiece width (max.): 500 mm, workpiece length (max.): 850 mm, overall weight: 2,190 kg, Charmilles Robofil 290P Year of manufacture: 2001 Travel distances (X/Y/Z): 400 x 250 x 200 mm Travel distances (U/V): 400 x 250 mm Taper angle: +/- 30° at 200 mm height Max. workpiece dimensions (W x D x H): 850 x 500 x 200 mm Max. workpiece weight: 500 kg Programmable pressure levels Injection pressure upper nozzle: 0...11.5 bar Injection pressure lower nozzle: 0...11.5 bar Standard wire guides: 0.25 mm Machine dimensions: 1800 x 1600 x 2180 mm Knjdpfx Aaew Htdpenef Machine weight: 2190 kg The machine was in use with our customer until recently and is available for immediate delivery.