Used Wire Pin for sale (8,083)

Condition: used, functionality: fully functional, machine/vehicle number: D12L/8461, Offer Number: D12L/8461 Machinetype: wire nail press Make: WAFIOS Type: S110 Constr. year: wire diameter: 2,2-3,8 mm nail length: 13-110 mm capacity - pieces/min: 350 Nsdozd U Rcepfx Airjlh Location: In our warehouse

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: D12L/8171, Offer Number: D12L/8171 Machinetype: wire nail press Info: with assembly device for head plates Make: WAFIOS Nlsdpfx Ajwi Tk Uoiroh Type: S110 Constr. year: 1970 wire diameter: 2,2-3,8 mm nail length: 13-110 mm capacity - pieces/min: 350 Location: In our warehouse

Condition: used, functionality: fully functional, machine/vehicle number: D12L/8458, Offer Number: D12L/8458 Machinetype: wire nail press Make: WAFIOS Type: S75 Constr. year: wire diameter: 1,8-3,1 mm nail length: 10-75 mm Nljdpfey Rz Ttox Airjh output - pieces/min: 420 Location: In our warehouse

Condition: used, Year of construction: 2013, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: MV2400R, workpiece weight (max.): 1,500 kg, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 305 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, type of input current: three-phase, table width: 640 mm, overall weight: 3,850 kg, table length: 840 mm, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 310 mm, input voltage: 220 V, input frequency: 50 Hz, input current: 35 A, Equipment: cooling unit, documentation/manual, Technical Specifications – Mitsubishi Electric MV2400R Control Unit Nlodpfx Aoz Sp Udsiroh Control System Manufacturer: Mitsubishi Axis Strokes Number of axes: 3 Technical Features Maximum taper angle: 15° / 260 mm Required compressed air: 0.5 MPa, 75 l/min PC technology with a 15-inch color LCD touchscreen and mouse Electronic hand-held control unit Support for 2D/3D CAM processing Graphical verification of machining Machine Capacity Max. taper angle 15° / 260 mm Machine Description This 3-axis wire EDM machine, Mitsubishi Electric MV2400R, was manufactured in 2013. It is equipped with a PC control unit featuring a 15-inch LCD touchscreen and supports 2D/3D CAM and graphical verification of machining. Condition The machine is still connected to the power supply and energized.

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Njdpfxor Nfvms Airslh Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: like new (used), Year of construction: 2018, Technical data: Travel ranges (X/Y): 300 / 200 mm Nlsds Afbykopfx Airjh Travel range (Z): 350 mm Diagonal travel range (W): 200 mm Table size: 350 x 250 mm Max. workpiece height: 180 mm Max. workpiece weight: 150 kg Electrode diameter: 0.2 – 3.0 mm Dimensions (length x width x height): approx. 1100 x 1100 x 2000 mm Machine weight: approx. 0.6 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm Nljdpezgu Igsfx Aireh u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool option for wire chopper automatic wire threading/cutting and repair documentation and software machine powered up for inspection

Condition: used, Scott HST Mixer Model 2496 Continuous High Intensity Mixer with liquid injection. Extremely versatile blender employed for a wide range of duties, including: • Mixing of dry powders • Liquid addition to dry powders • Agglomeration (with additional of liquid binder) • Coating Nodpfx Aiszvgmmsrjlh Adjustable paddles to control retention time. Large access doors for ease of cleaning. Installed Power – 45 kW. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: good (used), Year of construction: 2010, For sale Nledpfjzrfpxex Airoh CNC 5-Axis Drilling / Sinker EDM Machine – OCEAN Technologies OCT-90120CA (2010) 📝 DESCRIPTION For sale: High-precision 5-axis CNC drilling / sinker EDM machine from OCEAN Technologies Co., Ltd., model OCT-90120CA. This is a very large-capacity industrial machine, ideal for quickly drilling deep holes and machining complex cavities in the mold making, aerospace, and precision engineering industries. ⚙️ FEATURES AND TECHNICAL CAPABILITIES 📐 Travels and Machining Capabilities (5 Axes) X-axis travel: 900 mm Y-axis travel: 1,200 mm Z-axis travel (Vertical axis): 1,000 mm W-axis travel (Head guide): 350 mm Rotary axis / Dividing head (C-axis): Integrated rotary table for multi-angle positioning and machining without re-fixturing the workpiece. 🖥️ Numerical Control & System Operating system: Dedicated Windows XP Embedded. Interface: Ergonomic control panel with color screen, full industrial keyboard, speed potentiometers, and manual axis control buttons. ⚡ Electrical Specifications (Nameplate) Voltage: 400 V AC / 3 Phases / 50-60 Hz Capacity / Power: 35 KVA Overload current: 86 A Compliance: CE marking 🛠️ EQUIPMENT & INCLUDED ACCESSORIES Precision rotary table / chuck with grooves and fixing flanges. Complete filtration system and auxiliary chiller unit for dielectric fluid (RBSystem / Spracflo). Enclosed booth and protective housing with sliding doors. Adjustable control station and manual remote control. 📊 CONDITION & HISTORY Year of manufacture: March 2010 Serial number: DR06461209 Overall condition: Good working condition, machine is clean and maintained in a controlled industrial environment. Maintenance: Regular maintenance performed.

Condition: used, Year of construction: 2003, operating hours: 81,060 h, functionality: fully functional, machine/vehicle number: 921083, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 2,020 mm, total width: 2,050 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, table height: 1,000 mm, empty load weight: 2,450 kg, table load: 750 kg, input voltage: 400 V, tank capacity: 760 l, distance table to quill: 220 mm, input frequency: 50 Hz, input current: 18 A, Equipment: documentation/manual, The table has a hard chrome finish. In addition, we also sell the matching EasyChange XT 4-position workpiece changer from Erowa; see the nameplate for the model. Nlsdpfx Aoz Spd Ijirsh Pick-up only.

Condition: excellent (used), Year of construction: 2011, operating hours: 6,800 h, functionality: fully functional, machine/vehicle number: 0339, travel distance X-axis: 400 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 250 mm, total height: 2,220 mm, total length: 2,395 mm, total width: 2,240 mm, wire diameter (max.): 0.3 mm, type of input current: three-phase, table width: 636 mm, overall weight: 3,950 kg, table length: 473 mm, table height: 995 mm, empty load weight: 3,950 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 38 A, Equipment: cooling unit, documentation/manual, Good morning, Njdpfozzwrkox Airolh For sale is a Sodick AG400L LN2W wire EDM machine. The machine is in perfect working order and was used for our own tooling production. It has been maintained in excellent condition and, despite its age, has only 6,800 operating hours.

Condition: used, Year of construction: 2014, operating hours: 21,476 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 510 mm, feed length X-axis: 750 mm, feed length Y-axis: 500 mm, feed length Z-axis: 510 mm, We offer this used AGIE Charmilles CUT 400 SP wire erosion machine, manufactured in 2014. Type: CUT 400 SP Serial number: 001.018 Year of manufacture: 2014 Technical data: Travel ranges (X/Y/Z): 750 x 500 x 510 mm High-precision machining with excellent surface quality Automatic wire threading system (AWT) Modern CNC control with intuitive operation Stable machine construction for maximum accuracy Year of manufacture: 2014 Nledjz A R H Ujpfx Airjh Condition & Equipment: Regularly maintained Fully functional and ready for use Inspection and test run possible upon agreement Special features: Due to the large travel ranges, the machine is particularly suitable for larger workpieces and versatile applications in single-piece and series production. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1154, total height: 2,040 mm, total length: 2,200 mm, total width: 1,770 mm, type of input current: three-phase, table width: 400 mm, overall weight: 3,100 kg, table length: 600 mm, table height: 220 mm, empty load weight: 2,800 kg, table load: 450 kg, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, The Sodick AQ325L wire EDM machine was manufactured in 2002 by the Japanese company Sodic Co., Ltd. This is a precision CNC machine designed for cutting various shapes in conductive materials using the EDM (Wire Cut) method. This model combines a compact design with high machining accuracy, making it ideal for both single and serial production, especially for manufacturing parts with complex geometries. The machine offers a working area capable of machining parts with dimensions up to 350 × 250 × 220 mm and a weight of up to 450 kg. The stable construction and precise axis guidance ensure high repeatability and cutting accuracy, even with demanding materials and complex contours. Additional U and V axes allow for tapered cuts up to 20°, which significantly expands the technological capabilities of the machine. The Sodick AQ325L EDM machine operates with wire diameters ranging from 0.15 to 0.30 mm, offering adjustable wire tension over a wide range and a high wire feed rate, resulting in efficient and stable machining. The immersion system enables operation in a dielectric fluid, increasing the surface quality and dimensional accuracy of the machined parts. The Sodic AQ 325 L wire EDM machine is equipped with an efficient dielectric system with a capacity of 530 liters, featuring a filtration system based on replaceable paper filters and a deionizer, which guarantees the maintenance of appropriate operating parameters and a long service life for the components. The ergonomic table height and well-thought-out design facilitate operation and the preparation of parts for machining. Thanks to its robust construction, high weight, and proven technology from the manufacturer Sodick, the AQ325L model is a reliable solution for tool shops, production facilities, and companies involved in precision metalworking. Specifications of the Sodic AQ 325L Wire EDM Machine - Table travel (X / Y axis): 350 × 250 mm - Z-axis travel: 220 mm - Auxiliary table travel (U / V axis): 80 × 80 mm - Working table size: 600 × 400 mm - Working tank dimensions: 895 × 650 mm - Maximum workpiece height: 220 mm - Maximum workpiece height during immersion machining: 200 mm - Maximum workpiece weight: 450 kg - Maximum workpiece weight during immersion machining: 300 kg - Distance from the floor to the top surface of the table: 965 mm - Taper / cutting angle: 20° / 80 mm - Wire tension: 300–2300 g - Max. wire feed rate: 250 mm/s - Wire diameter: 0.15–0.30 mm - Max. wire spool weight: 6 kg - Machine dimensions (W × D × H): 1650 × 1900 × 2040 mm - Overall machine dimensions: 2250 × 2200 mm - Machine weight: 2800 kg Dielectric tank - External dimensions (W × D × H): 550 × 2200 × 1770 mm - Weight of empty tank: 230 kg - Capacity: 530 l Nsdpfjz Az Uvjx Airjlh - Deionizer: 10 l Filtration system: 2 replaceable paper filters - Layout / arrangement as shown in the drawing - Total length of the system: 3000 mm - Total width of the system: 3500 mm - Power supply: 3-phase AC 220V (50/60Hz)

Condition: used, Year of construction: 1988, functionality: fully functional, workpiece weight (max.): 350 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 270 mm, wire diameter (max.): 0.3 mm, table width: 450 mm, overall weight: 2,300 kg, table length: 600 mm, table height: 300 mm, empty load weight: 2,300 kg, Two machines for the price of one. One machine is fully operational and in good condition for its age, equipped with a collecting system (sliding slats), and the other can be made operational again with minimal effort, but the new owner can also use it for spare parts (all electrical boards are intact; the pump system and wiring system require repair). The Matra Fanuc Tape Cut W2 is a classic and extremely reliable CNC wire EDM machine manufactured in 1988. This machine combines the cutting-edge technology of the Japanese Fanuc control system with the precision engineering of the German Matra machine tool manufacturer. The machines can also be purchased separately upon request. Machine requiring repair: €1500; Operational machine: €4500. Nlsdjzcww Repfx Airoh

Condition: good (used), Year of construction: 1998, functionality: fully functional, PLEASE NOTE: If you purchase on August 10, 2026, or August 11, 2026, you will receive an additional discount. Type BF17B3S, Taiwan, 3 dies, year of manufacture 1998 Max. wire diameter: 12 mm Max. wire cross-section: 115 mm Max. ejector length: 90 mm Max. ejector on the punch side: 20 mm Motor: approx. 15 kW Max. output: 160 pieces/min, depending on the part to be produced Station 3: optional deburring or forming Press Biauli BF17B, year of manufacture 1998, 13 tons Oil pan: 424 kg Conveyor belt: 199 kg Nlodpfx Aijzd Da Hjroh Control cabinet: 205 kg Platform: 186 kg Machine parts/accessories: 565 kg We sell the above items with the exclusion of any warranty for defects in materials and workmanship and without guaranteeing functionality or dimensional accuracy. We are not aware of any major defects, and the machine has functioned perfectly until recently.

Condition: good (used), machine/vehicle number: Machine No.: 2 6108 031, WAFIOS R 31 Wire Straightening and Cutting Machine | Decoiler | Omron Control | Tooling | Complete Production Cell Complete Wire Straightening and Cutting System WAFIOS R 31 wire straightening and cutting machine | Wire decoiler / pay-off unit | Omron operator panel | Long material handling system | Extensive tooling | Safety enclosure For sale: a complete used WAFIOS R 31 wire straightening and cutting machine with peripheral equipment and extensive tooling. The machine is designed for straightening and cutting wire supplied from coils and is offered as a complete production cell, including the decoiler, wire processing equipment, long finished-part collection system, control equipment, tooling and safety guarding. The system consists of: • WAFIOS R 31 wire straightening and cutting machine • Wire decoiler / pay-off unit • Wire feeding and guiding system • Wire straightening section • Cutting system • Long finished-part handling / collection system • Omron operator panel • Digital weighing system • Electrical control cabinet • Dedicated tooling and accessories • Tool storage cabinet • Safety fencing and access gates • Emergency stop and safety system Technical Specifications • Manufacturer: WAFIOS • Model / Type: R 31 • Machine type: Wire straightening and cutting machine • Machine No.: 2 6108 031 • Operator interface: Omron • Wire supply: Coil / decoiler system • Integrated digital weighing equipment Equipment Included • Wire decoiler / pay-off system • Wire feeding equipment • Straightening and cutting equipment • Long material support and finished-part collection system • Omron operator panel • Digital weighing equipment • Electrical control cabinet • Extensive set of dedicated tooling • Straightening dies and rollers Nledpfx Aij Abal Rsroh • Wire guides and bushings • Cutting tooling • Tool storage cabinet • Safety fencing around the production cell • Supporting frames and accessories shown in the photos Tooling The machine is offered with a substantial set of dedicated tooling and spare tooling components. The photos show multiple straightening dies, rollers, guides, bushings, cutting components and other machine-specific accessories stored in dedicated drawers. Technical Condition Used industrial machine from a production environment. The machine is installed as a complete production cell together with its peripheral equipment, material handling system and safety guarding. The machine is offered with the tooling, accessories and additional equipment shown in the photos. Additional Information • Complete production cell available • Wire decoiler / pay-off unit included • Long finished-part handling system included • Extensive dedicated tooling included as shown in the photos • Digital weighing equipment included • Safety fencing included • Inspection available by appointment • Sale due to plant closure • All de-installation, loading and removal costs are the buyer’s responsibility

Year of construction: 2019, operating hours: 3,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: RM2019003, Rolling mill for flattening wire. Manufacturer: Nantong Geron Intelligent Equipment R&D Co., Ltd. Brand: GEHI Model: GZYH19004 Rolling Mill Year of manufacture: 08/2019 Serial number: RM2019003 TECHNICAL SPECIFICATIONS Supply voltage: 380 V Frequency: 50 Hz Installed power: 200 kW Working speed: 0 – 150 m/min Feed material (wire): Ø ≤ 13 mm Machine dimensions: 18,000 × 3,000 × 2,000 mm Approximate weight: 10,000 kg DESCRIPTION GEHI GZYH19004 industrial rolling mill, designed for processing wire and round materials with a diameter of up to 13 mm. High-capacity industrial machine, equipped with an installed power of 200 kW and a working speed of up to 150 m/min, suitable for industrial applications and high-volume production lines. Heavy-duty construction, with a total length of approximately 18 meters, designed for continuous industrial operation and high-speed processing. MAIN DATA Nlsdez Infrjpfx Airjh Model: GZYH19004 Year: 2019 Power: 200 kW Speed: up to 150 m/min Material diameter: up to Ø13 mm Weight: approx. 10 tons Dimensions: 18 × 3 × 2 m

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1320, For sale: SODICK CNC wire-cut EDM machine - Model: AQ325L LN 1W - Year: 2002 - Serial No.: 1320 The machine has been regularly maintained by BTS COMPANY d.o.o. and CELADA d.o.o. It was used for machining workpieces weighing up to 5 kg and for various toolmaking applications. Thanks to its precision, it operates with the accuracy of a measuring machine. Nodpfx Aioz Iywaerelh It is connected to the power supply and ready for operation.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, wire diameter (max.): 8 mm, WAFIOS BMU 40 CNC 3D Wire Bending Machine | 2015 | Decoiler | Tooling | Complete Production Cell Complete CNC Wire Bending and Forming Cell WAFIOS BMU 40 CNC wire bending machine | Wire decoiler / pay-off system | Tooling sets | Conveyor and collection system | Safety enclosure | CNC control For sale: a complete used WAFIOS BMU 40 CNC wire bending and forming machine with peripheral equipment and extensive tooling. The machine is designed for automatic production of formed wire components and is offered as a complete production cell. The machine is currently installed together with the wire feeding system, decoiler, finished-part handling equipment, safety guarding and dedicated tooling. The system consists of: • WAFIOS BMU 40 CNC 3D wire bending machine • CNC control unit with operator panel • Handheld operator control • Wire feeding and straightening section • Wire decoiler / pay-off unit • Automatic wire forming and bending section Nlodpfx Aijz R Rpbjrjh • Finished-part conveyor / collection system • Tooling and forming accessories • Tool cabinet with dedicated tooling • Additional machine tools and accessories • Safety fencing with access gates • Electrical and control equipment Technical Specifications • Manufacturer: WAFIOS AG, Germany • Model: BMU 40 • Machine type: CNC wire bending / forming machine • Number of CNC axes: 3 • Wire diameter range: 3 - 8 mm • Year of manufacture: 2015 • Machine No.: 2 7656 018 • Plan No.: 7656 2 9000 18 • Power supply: 3-phase, 400 V • Frequency: 50 Hz • Rated current: 13 A • Control voltage: 24 V DC / 230 V AC • CE marked Equipment Included • Wire decoiler / pay-off system • Wire feeding and straightening equipment • CNC operator station with screens and keyboard • Handheld control unit • Dedicated forming tools, dies, guides and accessories as shown in the photos • Tool storage cabinet • Finished-part conveyor / collection table • Product collection racks • Safety guarding around the complete production cell • Additional maintenance and setup tools as shown in the photos Technical Condition Used industrial machine from a production environment. The machine is installed as a complete production cell with peripheral equipment and tooling. The equipment is offered together with the accessories and tooling shown in the photos. Additional Information • Complete production cell available • Extensive tooling and accessories included as shown in the photos • Wire decoiler included • Finished-part handling / collection system included • Safety fencing included • Inspection available by appointment • Sale due to plant closure • All de-installation, loading and removal costs are the buyer’s responsibility Location Koszalin, Poland

Condition: used, Year of construction: 1998, Wire-cut EDM machine Manufacturer: FANUC Model: ROBOCUT ALPHA-0C Year of manufacture: 1998 Control system: FANUC Series 16-W Technical details: Control system: FANUC Series 16-W X-axis: 320 mm Y-axis: 220 mm Z-axis: 180 mm U-axis: 120 mm Nsdpfx Ajzrh N Usirslh V-axis: 120 mm Rapid traverse (X): 900 mm/min Rapid traverse (Y): 900 mm/min Rapid traverse (Z): 450 mm/min Rapid traverse (U): 450 mm/min Rapid traverse (V): 450 mm/min Max. workpiece weight: 250 kg Machine weight: approx. 1.5 t Connected load: 11 kVA Additional information: In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2002, Charmilles Robofil 440-CC Wire-Cut Electro-Discharge Machine. Serial No. 931081 (2002). Country of Origin: Switzerland Nledpfx Ais Afnltereh Please Note: this lot has been professionally decommissioned and secured for transit Location: This lot is located in Birmingham, UK. A charge of £550 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 1983, functionality: fully functional, machine/vehicle number: 54452, Wire erosion machine Nodpsz Nhwrofx Airjlh Charmilles P25 Year of manufacture: 1983

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 820 mm, warranty duration: 6 months, Equipment: documentation/manual, GF AgieCharmilles CUT E350 Year of manufacture: 2015 Wire EDM machine with automatic wire threading Travel ranges (X/Y/Z): 350 x 250 x 250 mm Travel ranges (U/V): +/- 45 mm Taper / height: 30° at a height of 77 mm Max. workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Excellent surface finish for carbide/steel: 0.12/0.18 µm (Ra) Standard wire guides: 0.20 or 0.25 mm User-friendly AC CUT HMI 2 control interface Operation via 19" TFT touchscreen Machine dimensions: 1750 x 2470 x 2200 mm Total weight without dielectric fluid: 2525 kg After receiving the order, we will clean, service, and thoroughly test the wire EDM machine. We can also perform a test cut or an on-site inspection under power beforehand. We can also handle commissioning and training. We offer the following options: - Transport and installation - Cooling unit Nljdpfx Aioz Uwf Aoroh - Clamping devices - Wire / filters / resin

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, REF: MM6419 Carnitech CT 2612 single-lane pin-bone removing and packing line for salmon and trout fillets. The pin-boner dates from 2000 and the packing line from 2023/24. Nedpfx Aisy Swi Horelh Technical specification: ✅ Manufacturer - Carnitech A/S ✅ Model - CT 2612 ✅ Lanes - 1 ✅ Pin-boner year of manufacture - 2000 ✅ Packing line year of manufacture - 2023/24 ✅ Capacity - up to 36 fillets per minute ✅ Fillet size - 0.5 kg to 4 kg ✅ Fillets are conveyed head end first, skin side down, on a PVC belt Condition: According to the seller, the line is in full working order, and the pin-boner has been refurbished, including new electrics. Video available.

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 808, The machine is designed for straightening and cutting wire with a diameter of 4-10 mm and a tensile strength of 400-700 N/mm2, using appropriate straightening and cutting tools. The maximum length of the cut wire is 3000 mm. Wire coil: maximum coil weight 1500 kg, maximum coil height 1000 mm, internal coil diameter 450 mm. The total length of the machine, including the wire unwinder, is approximately 10 m. Nledpfx Aiszy Et Teroh Machine weight: 8 tons. Location: In our workshop.