Used Wire Winder for sale (3,151)

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0044, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, feed length X-axis: 350 mm, feed length Y-axis: 250 mm, feed length Z-axis: 256 mm, The machine was manufactured in 2011, but it was not put into operation and modernized until 2016. As part of this process, an electrical update for the WorkPartner automation system was carried out! TECHNICAL DETAILS Ljdpfxezf E Nxo Adkern Workpiece weight max.: 200 kg Travel range X-axis: 1,800 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 1,100 mm Workpiece height max.: 250 mm Workpiece width max.: 750 mm Workpiece length max.: 550 mm Feed length X-axis: 350 mm Feed length Y-axis: 250 mm Feed length Z-axis: 256 mm MACHINE DETAILS Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 3,000 x 3,760 x 2,455 mm Total weight: 3,700 kg EQUIPMENT Documentation/Manual Cooling unit Note: The operating hours of the machine can be found in the last image.

Year of construction: 2026, condition: new, Our KVK 5 is a semi-automatic rotary arm wrapper, which has the advantage over our wrappers with turntable that your pallets can be placed at ground level for the wrapping process. Equally ideal for light, unstable and heavy packaged goods, as there are no centrifugal forces and no load-bearing capacity to consider. In addition, the KVK 5 model is equipped with a pre-stretch system for 250% elongation. This pre-stretching system allows you to produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. Lrjdpfx Adoy U U T Ioksn With the KVK 5, there is only minimal contact tension, so that even light packages are not pulled off the pallet. The only thing that still has to be done manually with this wrapper is applying and cutting the film. The machine weight of almost 1000 kg shows how solid and stable this wrapper is. With its rotating arm, it can wrap pallets up to a maximum dimension of 1.00 x 1.20 x 2.40 m. With adjustable speeds of the rotating arm and film carriage, as well as a pre-stretching unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. In addition to an optional photocell for the detection of dark packing goods or black film, this wrapper can be supplied either for wall mounting or with the feet shown. We recommend this model if it is important to you not to have to overcome a ramp with your goods - for example because they are too heavy or unstable. The fact that the rotating arm in this design rotates around the pallet also avoids any centrifugal force. Together with the low contact tension of the pre-stretch system, this also makes the KVK 5 ideal for very light packaged goods. For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: used, Year of construction: 2006, Wire erosion / EDM Travel distance X: 300 mm Travel distance Y :200 mm Travel distance Z: 200 mm max. workpiece size X: 500 mm max. workpiece size Y: 300 mm max. workpiece size Z: 200 mm max. workpiece weight: 300 kg table size X: 536 mm table size Y: 337 mm with AWF ( Automatic Wire Feeding ) U / V axis: 80x80 Lrodpfxsy Uvpde Adkon generator: 60 Ampere submerged Control: Sodick LN1W Taper Cutting Capacity: ±20° / 80 mm Wire Diameter: 0.15–0.30 mm

Condition: new, functionality: fully functional, Crimp force controller. Lrjdpfey Ivdbsx Adkon

Condition: good (used), Year of construction: 2002, functionality: fully functional, Gamma 333 fully functional. Ljdpfx Ajy Ah R Nedkjrn

Year of construction: 2004, condition: excellent (used), Known K&S 8020 Specifications Specification Value Bonding type Automatic thermosonic ball bonder Wire material Gold wire (Au) Bond head Voice-coil direct-drive bond head Ultrasonic transducer 120 kHz unibody transducer with adaptive USG Vision system 20/20 vision system Camera Sony XC-75 CCD Bond pitch capability Sub-70 µm pitch kit available Bond area 2.0 × 2.3 in (≈ 50.8 × 58.4 mm) Optics Universal optics with increased depth of field Illumination LED Workholder 250-series heated manual workholder Power 208 V, 50/60 Hz Control Software-controlled automatic bonding programs Typical Process Capability The 8020 was developed to provide: Fine-pitch bonding Long, low wire loops Improved process control High throughput for leadframe and laminate packages Automated vision alignment and pattern recognition These capabilities were key selling points of the 8000 family. Applications Plastic IC packages SOIC, QFP, TSOP Memory devices ASICs Hybrid microelectronics Chip-on-board assemblies Physical Characteristics Unfortunately, a complete factory datasheet with dimensions, weight, XY-table resolution, bond-force range, and supported wire diameters is not readily available in public archives. Most of the available information comes from listings of used equipment and K&S annual reports. If you need details such as: Bond force range (grams) Wire diameter range (e.g., 0.7–2.0 mil) XY positioning resolution Air requirements Ledpjzdgm Dofx Adkern Maintenance manual Error codes or calibration procedures

Condition: used, The K&S 8030 was a wire bonder, likely a specialized or less common variant. Based on the architecture of the 8000-series bonders, the typical specifications were approximately: Lrjdpfxjzdgl He Adksn Parameter Typical 8000-Series Capability Bonding method Thermosonic wire bonding Wire types Gold (Au), Aluminum (Al) depending on configuration Bond type Ball bonding or wedge bonding (model-dependent) Positioning Vision-assisted X-Y motion control Bonding area Typically 50–100 mm class work envelope Applications IC packaging, hybrids, chip-on-board, microelectronics Automation Programmable automatic bonding sequences

Condition: good (used), functionality: fully functional, Gitterbox emptying, pneumatic, for gitterboxes 1200 x 800 mm Dimensions: 2200 x 1700 x 2250 mm (LxWxH) Weight approx. 1500 kg Note: The machine is in good condition. It was checked and tested by us in 28816 Stuhr. You can find the video above in the pictures, or on our website or our YouTube channel. Inspections, even under power, are possible at any time by arrangement. Video calls are possible on request. We are happy to answer questions about the machine by phone from Monday to Thursday from 8 a.m. to 2 p.m. On Friday we are there for you from 8 a.m. to 1 p.m. Ljdpfx Asv Nhk Dodkorn Please note: All technical data refers to information provided by the manufacturer. We accept no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Viewings are possible by arrangement. The sale takes place ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine Ledpfsw Spa Nsx Adksrn AGIE - Agiecut Progress 3

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 440 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 1,700 mm, total length: 1,650 mm, total width: 1,150 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 400 mm, table width: 380 mm, overall weight: 1,150 kg, table length: 650 mm, empty load weight: 1,150 kg, warranty duration: 12 months, input voltage: 400 V, The EDM32 wire electrical discharge machine is a precision device designed for electro-erosion machining of electrically conductive materials. It is ideal for the production of tools, molds, and components requiring high accuracy and surface quality. The machine enables efficient cutting of complex shapes in both single-piece and serial production. Thanks to its stable construction and well-optimized operating parameters, the EDM32 ensures high productivity and repeatability of the machining process. The device allows cutting at angles up to ±6°, increasing its technological versatility. The use of wire with a diameter of 0.12 to 0.25 mm enables precise machining of even highly demanding components. The machine provides good surface finish quality at the level of 1.6–2.5 Ra, reducing the need for additional processing. High cutting efficiency and stable wire speed ensure optimal performance. The robust construction and maximum table load of up to 400 kg allow machining of heavier workpieces without loss of accuracy. Ljdpfxjy A N Ezo Adkjrn Technical data Table travel: 440 × 350 mm Table size: 380 × 650 mm Max cutting height: 400 mm Wire diameter: 0.12 – 0.25 mm Taper cutting: ±6° Max cutting efficiency: 120 – 150 mm²/min Surface roughness: 1.6 – 2.5 Ra Machining power: 2 kW Wire speed: 11 m/s Max table load: 400 kg Weight: 1150 kg Machine dimensions: 1650 × 1150 × 1700 mm Applications Mold and die production Toolmaking industry Precision metal machining Production of complex geometry parts

Condition: excellent (used), Wire Straightening Devices for Wire and Rods Most units are from the manufacturer Witels Albert, but there are also other brands available. Ljdpfx Ajy Eyzfodksrn The smallest straighteners are suitable for wire diameters of 0.5 – 0.8 mm, with the largest accommodating up to approximately 16 mm. All devices have been inspected and are clean. I am selling these at approximately 50 – 60% of the original price.

Condition: used, Electric hoist, crane, electric wire rope hoist, wire rope winch DEMAG type P 10 Serial no. 941 477 Year of construction 1962 Lifting capacity 2000 kg with 4 ropes Lifting height 5 meters Lifting speed 6 m/min. Fine lifting speed 1.3 m/min. Reeving 4/1 Motor power 0.6 / 2.6 kW Mains connection 380 Volt, 50 Hz - DEMAG hoist, type 19/11 K28P - Electric trolley DEMAG, type 13 / 6 K8 Leder E Ht Hjpfx Adkjrn - 1 Travel speed approx. 19 m/min - Trolley for double T-beams, beam width 120 to 180 mm - Load hook for 4 load lines - Operating cylinder for the hoist with approx. 2.5 meter cable length Space requirement L x W x H 1400 x 900 x 500 mm Weight 350 kg Good condition

Condition: used, Year of construction: 2005, Wire erosion / EDM Travel distance X: 750 mm Travel distance Y :500 mm Travel distance Z: 400 mm max. workpiece size X: 1050 mm max. workpiece size Y: 750 mm max. workpiece size Z: 400 mm Lrsdpfjy Tl I Hjx Adkjn max. workpiece weight: 1500 kg with AWF ( Automatic Wire Feeding ) U / V axis: 770 x 520 mm Machine Dimension:. 2050 x 2850 x 2295 mm Machine Weight: 6000 kg Dielectric System Submerged machining CNC Control: LQ33W • Linear Motor Drives (X/Y/U/V) • Glass Scale Feedback System • No Backlash • High-Speed Automatic Wire Threading (AWT) • Ceramic Components • Advanced Corner Control • LAN / Network Connection • Dielectric Cooling Unit • Built-In Voltage Stabilizer • Precision Motion Controller (K-SMC)

Condition: good (used), Year of construction: 2006, MACHINE Lodpfxsy Snbme Adkorn Wire EDM Machine Manufacturer: Mitsubishi Machine Model: FA 20 Control: Year of Manufacture: 2006 TECHNICAL DATA Travel distances - X-axis: (mm) 500 - Y-axis: (mm) 350 - Z-axis: (mm) 300 Machine Table - Table size, fixed table L x W: (mm) 780 x 630 - Max. table load: (kg) 1,500 - Workpiece dimensions: (mm) 1,050 x 800 x 295

Condition: used, Year of construction: 2013, Wire erosion / EDM Travel distance X: 600 mm Travel distance Y :400 mm Travel distance Z: 350 mm Ledpjy S Tgzefx Adksrn max. workpiece size X: 800 mm max. workpiece size Y: 570 mm max. workpiece size Z: 340 mm max. workpiece weight: 1000 kg table size X: 1050 mm table size Y: 710 mm with AWF ( Automatic Wire Feeding ) U / V axis: 150 x 150 mm submerged CNC Control: SPW

Condition: good (used), Hohner Economy 25/40 Wire Stitcher Very good condition. Lrjdpey Hgi Sjfx Adken A reliable machine with legendary durability. Technical specifications: Capacity: 206 cycles/min Sewing thickness: 25mm (punching up to 40mm without closing the staple from the bottom) Wire diameter: max. 1mm Power supply: 380V Weight: 240kg The machine has an adjustable table for block and booklet stitching.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 8,400 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, overall weight: 3,700 kg, A demonstration machine is for sale. Travel range: X-axis: 600 mm Y-axis: 400 mm Z-axis: 300 mm U-axis: ±50 mm V-axis: ±50 mm Max. workpiece dimensions: 990 x 620 x 295 mm Max. table load: 550 kg Max. taper: ±21º / 100 mm Machine weight: 3700 kg Machine height: 2210 mm Machine dimensions: 2480 x 2980 mm Standard wire diameter: 0.15 to 0.3 mm Max. weight of wire spool (kg): 10 kg (P10) Surface quality: Ra 0.35 Capacity of the water system (l): 1000 Machine equipment: Lrodpfx Adsza Eppeken Transformer Windows CE touch screen controller Automatic wire threading (AWT) SD Master Tubular linear drive Collision protection X/Y/Z/U/V axes 0.1-μm resolution in the linear scale PC acrylic filter tank cover Standard remote box Water chiller Flush gun Protective door lock 3-filter water tank design CE conformity configuration Demineralized water tank

Condition: good (used), Year of construction: 2004, functionality: fully functional, The used FANUC ALFA 1-iC wire EDM is a medium-sized, 5-axis CNC-controlled electrical discharge machine with submerged machining; X/Y/Z travel: 550/370/410 mm; year of manufacture: 2004, CE-compliant, complete with automatic wire threading, chiller, and openable roof. Technical specifications of the FANUC ROBOCUT ALPHA 1iC wire EDM: - Maximum workpiece dimensions (L x W x H): 820 x 730 x 300 mm - Maximum workpiece weight: 1000 kg - CNC control: Fanuc Series 180is-WB - 5 axes (X, Y, Z, U, V) Lrodexd R Hmjpfx Adkjn - Stroke on axes X/Y/Z/U/V: 550/370/410/120/120 mm - Rapid traverse on X, Y, Z axes: 900 mm/min - Rapid traverse on U, V axes: 450 mm/min - Worktable size (L x W): 780 x 600 mm - Maximum cutting angle: 30 degrees - Automatic wire threading - Wire diameter: 0.1–0.3 mm - Electrical supply: 400 V; 50/60 Hz - Total power requirement: 13 kW - Total machine weight: 3100 kg

Year of construction: 2012, condition: ready for operation (used), - USED - WIRE EDM MACHINE WITH AWF X-AXIS TRAVEL: 750 mm Y-AXIS TRAVEL: 500 mm Z-AXIS TRAVEL: 410 mm Ledpfx Adoytkdrskorn U/V-AXIS TRAVEL: ± 100 mm RAPID FEEDS X-Y-Z: 1,3 m/min MAX  PIECE WEIGHT: 3000 Kg MAX PIECE SIZE: 1300 x 1000 x 405 mm TABLE SIZE: 1100 x 875 mm DRAFT ANGLE / DRAFT HEIGHT: ± 15 °; 360 mm WIRE SPEED: 0-15 m/min WIRE DIAMETER: 0,20-0,36 mm CONTROL UNIT: MITSUBISHI 3D Advance WEIGHT: 5700 Kg OVERALL DIMENSIONS: 3495 x 3143 x 2633 mm NOTE: CNC Z AXIS; WIRE CRUSHER; LINEAR SCALES ON X and Y AXIS; 20 Kg REEL OF THREAD UNIT

Condition: used, Year of construction: 2002, Voltage: 400V / 50/60Hz / 3 phases Ljdpfx Adsza U Nlekern Machining method: Immersion Maximum workpiece size: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table dimensions: 900x600 mm Distance from floor to table: 900 mm Total dielectric fluid volume: 1200 L Axes X, Y, Z, U and V Travel ranges X, Y, Z: 550 x 350 x 400 mm Travel ranges U, V: 550 x 350 mm Collision protection: Axes X, Y, U, V, Z Tapered cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (Option 0.1/0.2/0.3 mm) Wire guide type: Closed diamond guide, gap-free Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 kg (P5) Dielectric fluid Paper filter: 2 cartridges Dielectric fluid temperature: +/- 1°C Total volume of ion exchange resin: 20 L Maximum injection pressure: 20 bar Generator: Dual source Isopulse Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 microns Ra Measuring system: Glass scales Measuring resolution: 0.5 microns Servo motors: AC type All technical specifications are subject to change without notice; errors and omissions excepted. The machine was fully functional until it was dismantled. Warranty is excluded.

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: D60L/8489, Offer Number: D60L/8489 Machinetype: wire weaving loom Make: GERMAN Type: wireloom Constr. year: 1970 wire diameter range: 1,5-7 mm mesh width: 15-80 mm line wire distance: 15-80 mm working width: 2100 mm Lrodpjzbcthefx Adken mesh width automatic: 200 mm output - strokes/min: 22 Location: Germany

Condition: used, Year of construction: 2007, Travel distance: X 500 mm Y 350 mm Z 300 mm Water bath machine Automatic wire threader Ljdpjuu Dl Rsfx Adksrn

Year of construction: 1998, condition: ready for operation (used), X-axis: 500mm, y-axis: 350mm, z-axis: 256mm, taper cutting device: U=70mm, V=70mm, connected load: 9kVA, rated current: 13.1A, weight: 4.4t, equipment: automatic wire threading, lowering water tank, universal clamping frame, hand-held control unit, AgieSetup 3D automatic workpiece position compensation, flushing gun, paper cartridge filter and Lei/Wirecut programming software with dongle. An on-site inspection is possible. Lsdpfxjzadkxs Adkorn

Condition: used, Year of construction: 2003, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 180 mm, CNC wire EDM machine Fanuc, type Robocut Alpha O I B, year of manufacture 2003. Travel of XY axes: 320 x 220 mm. Travel of UV axes: plus/minus 60 mm. Z-axis adjustment: 180 mm. Clamping area: 530 x 360 mm. Maximum workpiece height: 180 mm. Internal space: 70 x 430 mm. Maximum workpiece weight: 500 kg. Ledpfsyankpsx Adksrn

Condition: reconditioned (used), Year of construction: 2013, Equipment: fridge, AGIECHARMILLES CUT400 wire EDM machine, manufactured in 2013. Travel: X 800, Y 550, Z 510, U 800, V 550 mm. Maximum taper: 30°/510 mm. Maximum workpiece dimensions: 1,300 x 1,000 x 510 mm. Maximum workpiece weight: 3,000 kg. Threading height up to 510 mm. Available wire diameters: 0.10 - 0.33 mm. Best surface finish: 0.20 Ra. Wire spools up to 25 kg. CHILLER UNIT. Ljdpfxjzbimhs Adksrn Dielectric volume: 1,700 liters. INCLUDED SOFTWARE: TAPER-EXPERT, CT-EXPERT, PROFIL EXPERT, POWER EXPERT, SURFACE EXPERT. Wide selection of technologies for the most common workpiece/wire materials.