Used Wood Pellet Mills for sale (15,073)

Condition: used, Year of construction: 2007, travel -x axis 650 mm travel -y axis 600 mm Cjdpfxozaf Hus Aizsri travel -z axis 500 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 10.000 U/min NC rotary indexing table Ø 630 mm numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U | C40U | C-40U | C-40 U

Condition: used, Year of construction: 2006, travel -x axis 2.000 mm travel -y axis 620 mm Crodo Ah T U Tepfx Aizoi travel -z axis 520 mm numbers of positions in the tool changer 56 tool adaptor SK40 5-axis machining center | HEDELIUS - RS60 Magnum KM2000 equipped with shuttle operation, rotating swivel turntable and chip conveyor. Please note that the technical details were added from comparable machines. The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: RS60 KM2000 | RS-60 | RS 60

Condition: used, Year of construction: 2011, travel -x axis 850 mm travel -y axis 700 mm Crsdpfj Ah Uabjx Aizji travel -z axis 500 mm control HEIDENHAIN - iTNC 530 turning speeds 10.000 U/min numbers of positions in the tool changer 38 tool taper SK40 5-axis simultaneous machining center | HERMLE - C 40 U equipped with internal coolant supply (80 bar), a 38-tool changer, a swivel axis, and a rotary table (ø 800). Additional equipment: - Swivel axis - rotary table (ø 800) - Blum Tool breakage control / -measurement The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 40 | C40 | C-40 | C40U

Condition: new, For sale, a new milling machine. Cjdpfxez Sb Tgs Aizori

Condition: excellent (used), For sale: a fully functional Müller Maschinen SM 152 shredding mill. The machine is equipped with a hopper, a chamber with blades, a screen, and a control panel with an emergency stop switch. The visual condition and equipment are shown in the photos. Data from the nameplate: - Manufacturer: Müller Maschinen GmbH, Germany Cedsz Spd Ujpfx Aizeri - Type: SM 152 - Year of manufacture: 2003 - Power supply: 400 V, 50 Hz - Power: 2.2 kW - Current: 5.2 A - Protection rating: IP54 - Machine number: 15203023

Condition: excellent (used), For sale: WAGNER FCA 500 universal milling machine in very good technical condition. This machine features robust German construction and is equipped with a 3-axis digital readout (DRO), which significantly facilitates precise machining operations. The mill is ideally suited for tool shops, single-part production, as well as maintenance and service work. Technical specifications: Crsdpfx Aoz Slpxjizsi • Manufacturer: WAGNER Maschinen • Model: FCA 500 • Year of manufacture: 2004 • SINO digital readout – 3 axes (X,Y,Z) • Spindle speeds up to 2000 rpm • Power supply: 380 V • Frequency: 50 Hz • Total power: 6.5 kW Equipment: • Vertical milling head • SINO digital readout • Variable speed control • Large work table with T-slots The machine is complete, in good technical condition, and shows normal signs of use.

Condition: good (used), For sale: Benz angle heads. Price stated is per unit. - 4-40370 Crodpfx Aisz Sk Slezoi - 4-40371

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,700 mm, feed length X-axis: 5,700 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,700 mm, position of the milling head: Testa birotativa A+B 1° + 3°, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, table length: 7,300 mm, table width: 1,090 mm, spindle motor power: 30 W, Equipment: documentation/manual, rotational speed infinitely variable, - FIDIA C20/H6 numerical control - Electronic handwheel - Operator platform - Spindle cooling system - 24-position tool magazine Codpfxszix Rwo Aizjri - 3 longitudinal tables, 1520 x 1000 x 900 mm - Splash guard enclosure - CE marking

Condition: excellent (used), Year of construction: 2014, Pellet production line ZEPPI ! Cedpfx Aez I S Svjizeri Capacity - 2t/h Pellet press - ZEPPI 132 Kw Year - 2014 Exellet condition !

Condition: used, Year of construction: 2006, CNC lathe, 2-axis Doosan S280N, year 2006 Fanuc Oi Mate TB control Chuck diameter: 210mm (8 inches) Spindle bore: 51mm Turning length: 320mm Crjdpfx Ajz Rpg Djizji Max. turning diameter: 280mm 10-tool turret Tailstock Parts catcher Chip conveyor with tank and pump Machine documentation

Condition: excellent (used), Year of construction: 2014, Takisawa NEX - 908 – 6-axis machine Year of manufacture: 2014 Control system: - Fanuc Series 32i - Model B Tool turret: - 12 stations, all stations driven (powered tools) Crsdpfx Aio Adrf Ujzji Main spindle: - Spindle bore 52 mm. Axes: - X, - Z, - C, - Y, - A, - B Accessories: - Various driven tools, axial/radial - Various collets - 1 collet chuck - Parts collection system - Chip conveyor - Coolant system Availability: - Immediate Special features: - The machine will be sold complete with all accessories (full equipment package). - The machine can be inspected and tested under power.

Condition: good (used), Year of construction: 2012, functionality: fully functional, DOOSAN PUMA 2600S – CNC turning center with subspindle, FANUC, year 2012 We offer for sale a DOOSAN PUMA 2600S CNC turning center with subspindle, equipped with a reliable DOOSAN-FANUC i Series control system. The machine is in operation and can be demonstrated and tested upon request. Technical specifications: Manufacturer: Doosan Infracore Model: PUMA 2600S Year of manufacture: 09/2012 Serial number: ML0218-000034 CNC control: DOOSAN-FANUC i Series Configuration: main spindle + subspindle Max. turning diameter: approx. 376 mm Max. turning length: approx. 760 mm Main spindle chuck: approx. 10" Bar capacity through main spindle: approx. 76 mm Max. main spindle speed: approx. 3,500 rpm Main spindle power: approx. 18.5 / 22 kW X-axis travel: approx. 260 mm Z-axis travel: approx. 830 mm Turret: 12 positions Codpj Acnp Tofx Aizori Automatic subspindle for complete part machining Chip conveyor Rated machine power: 40.7 kVA Power supply: 200/220 V, 3 phases, 50/60 Hz Machine weight: 5,400 kg Robust CNC turning center suitable for both series and single-piece production. Thanks to the subspindle, it enables machining of the part from both sides without the need for manual switching between individual operations. The machine is currently powered on and can be demonstrated in operation.

Condition: good (used), 1 unit, used. Cutting mill including dust extraction system. Manufacturer: DREHER Csdpe Afbvxjfx Aizeri Year of manufacture: 1998 Type: S34/52 GFS Special Infeed size: 375 mm x 370 mm Rotor diameter: 340 mm Motor power: 22 kW

Condition: good (used), Year of construction: 1998, - Heidenhain CNC Pilot control system - Accessories included - Powered tooling - Counter spindle Work area Max. turning diameter 160 mm Swinging diameter over bed 440 mm Swinging diameter over compound slide 210 mm Turning length 350 mm Main spindle Spindle bore 56 mm Max. spindle speed 5,000 rpm Drive power 7.5 kW Number of spindles: Main spindle C-axis Travel distances X-axis 160 mm Crodj Afhifspfx Aizoi Z-axis 350 mm Tailstock travel 350 mm Tailstock Arbor diameter 80 mm Tailstock travel 350 mm Tailstock mounting MK 3 Feeds Rapid traverse X 20 m/min Rapid traverse Z 30 m/min Space requirement approx. 2,800 x 1,800 x 1,800 mm Machine weight approx. 3,400 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Cedpfxs Ad Izrs Aizori Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: used, Year of construction: 2013, Milling machines Travel distance X: 650 mm Travel distance Y :530 mm Travel distance Z: 600 mm Number of axis: 3 milling machine / machining center Control: Heidenhain iTNC 620 Credpfx Aj Adz Hhjizoi spindle chuck: SK40 spindle revolutions: 9000 rpm Speed range to: 9000 U/min table size X: 850 mm table size Y: 560 mm tool changer: 30 - time Rapid traverse: 30 m/min chip conveyor control Heidenhain - Very good condition - Washdown gun - Electronic handwheel - Documentation / manual - Without clamping equipment - Inspection under power possible

Condition: used, Year of construction: 2013, Milling machines Travel distance X: 600 mm Travel distance Y :500 mm Cedpfxj Adz Hns Aizsri Travel distance Z: 540 mm Number of axis: 3 milling machine / machining center Control: Heidenhain iTNC 530 spindle chuck: SK40 spindle revolutions: 14000 rpm Speed range to: 14000 U/min tool changer: 24 - time spindle cooling chip conveyor control Heidenhain - DXF file import - Electronic handwheel - Through-spindle coolant (IKZ) - Belt filter - Air cooling through the spindle - Spindle spray ring - Direct measuring system / linear scales - Renishaw laser tool measurement - Renishaw OMP40 3D touch probe - Documentation / manual - Very good condition - Without the vises shown in the pictures

Condition: used, machine/vehicle number: 14088, Rotor diameter = 800 mm Rotor width = 1500 mm Rotor blades = 9 rows Stator blades = 4 pieces Drive power = 200 kW Cedpfx Aij Admcnszeri

Condition: not inspected (used), travel distance X-axis: 400 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,150 rpm, Universal Tool Room Milling Machine Manufacturer: DECKEL Model: FP3NC Control System: Dialog 4 Technical Specifications: - X-axis travel: 400 mm - Y-axis travel: 315 mm - Z-axis travel: 400 mm Codpfx Aiozz S Rnozjri - Spindle speed: 3,150 rpm Condition: used, untested In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, 1 used, partially overhauled universal milling head, System "HURON" with hydraulic tool clamping Manufacturer: EMENA - MTE, Origin: Spain Model: VAR 3 - BF, BM, COMPACT Technical data: Spindle mount DIN 69871 ISO 50 Overhang 358 mm Max. speed range 3000 rpm Max. drive power 22 kW Mounting flange: Outer diameter Ø 306 mm Dimensions L x W x H 460 x 306 x 360 mm Weight approx. 150 kg Accessories / Special features: • 2 pivoting axis system "HURON" • Hydraulic tool clamping • For retrofitting to conventional, NC or CNC milling and panel milling machines or drilling machines (e.g.: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) Delivery time: approx. 2 weeks after order receipt The following work will be carried out during the partial overhaul: - 1 new gear pair - 1 new gear shaft - New bearings for the milling spindle and the gear shafts Codpfx Aisz Adz Iezjri - New seals for the milling spindle and hydraulic tool clamping - New paint job The image is similar and shows a milling head that has already been overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 875 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 7,000 rpm, overall weight: 4,500 kg, CNC control Heidenhain TNC 426 electronical hand wheel manual swivel head quill coolant device Crsdszr D Akopfx Aizoi measuring feeler Technische Daten: /technical details X Weg / x travel 875 mm Y Weg / y travel 500 mm Z Weg / z travel 500 mm Drehzahlbereich 2-stufig / spindle speed range (2-steps) 20 - 7000 UpM / rpm Eilgang / rapid feed 15 m/min. Spindelaufnahme / spindle taper SK 40 Tischaufspannfläche / table clamping area 900x528 mm Gewicht der Maschine ca. / weight 4500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, machine/vehicle number: #14199, Rotor diameter: 800 mm Rotor width: 1000 mm Number of rotor blades: 7 Number of stator blades: 3 Crodpsz Svb Dsfx Aizei Inlet cross-section: approx. 900 x 1000 mm Drive motor: 110 kW

Condition: used, Year of construction: 2011, operating hours: 69,103 h, functionality: fully functional, machine/vehicle number: NT430111102, travel distance X-axis: 750 mm, travel distance Z-axis: 1,635 mm, overall weight: 26,500 kg, For sale is a CNC turning and milling center from the renowned manufacturer Mori Seiki, type NT4300DCG/15000S, manufactured in 2011. The machine features a dual spindle, a milling spindle, and extensive technical equipment, making it suitable for demanding turning and milling operations. Codpj Afx Alefx Aizsri Technical specifications: Manufacturer: Mori Seiki Type: NT4300DCG/15000S Year of manufacture: 2011 Serial number: NT430111102 Machine number: 1216 Travel distances X/Z: 750 / 1,635 mm Max. turning diameter: 750 mm Electrical connection power: 69 kVA Machine weight: approx. 26,500 kg Control system: Type F31IA5 Equipment and accessories: Dual spindle Milling spindle 10-position tool turret, partially with driven tools Three- and four-jaw chucks Internal tool measuring system Renishaw HPRA Chip conveyor, manufacturer Enomoto Coolant filtration system with band filter, manufacturer Knoll, type FKA500, year of manufacture 2012 Separate cooling unit, type CLPB, serial number 159145 Siemens control system, type Simatic Two workbenches with 10 and 12 drawers respectively Partition and lighting system Extensive accessories with digital and analog measuring instruments, hand tools, and machine accessories Sales offer: A powerful CNC machining solution with extensive equipment for industrial production. The machine is offered including the described accessories. Attractive offer – flexible & hassle-free We offer you not only a high-quality product but also customized financing options that adapt to your needs. Whether it's a down payment, installment payment, or individual financing models – together we will find the right solution. If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so that you don't have to worry about anything. 📞 Feel free to contact us for more information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes, and errors!

Condition: good (used), Year of construction: 2006, functionality: fully functional, Overhauled: 2014 Control system: Heidenhain iTNC 530 Table: 10,000 x 3,000 mm X-axis travel: 10,000 mm Y-axis travel: 4,200 mm Z-axis travel: 1,100 mm Distance between columns: 3,500 mm Distance between table and spindle (without head): 2,000 mm Distance between table and 45° head: 1,298 mm Table load capacity: max. 30,000 kg Rapid traverse rate: 10 m/min Feed rates: 6 m/min Spindle speed: 3,000 RPM Spindle power: 40 kW Crsde Adn Rgjpfx Aizei 3 heads: 1. Vertical, integrated, 2. Universal orthogonal head 1°, 3. Universal twist head

Condition: used, Year of construction: 2001, machine/vehicle number: .01720, with CNC control, manufactured by FIDIA, type: C20, travel ranges: X-axis: 2400 mm, Y-axis: 2850 mm, Z-axis: 1000 mm, with automatic tool changer with 20 tool stations, with T-slot clamping plate, size: approx. 2000 x 1800 mm, coolant system. Cjds Af Nlmjpfx Aizeri