Used Wood Pellet Mills for sale (23,884)

Year of construction: 2002, condition: ready for operation (used), General Data Machine weight 4300 kg Tjdpexwquwsfx Ac Nsf Movement X-Axis Movement 3860 mm Z-Axis Movement 185 mm Y-Axis Movement 1793 mm Main Drive Number of axis 3 Spindle Speed 24000 RPM Spindle motor power 17 kW This 3-axis Weeke CE OPTIMAT BHC VENTURE 3 was manufactured in 2002. It features a powerful 17 kW main motor and a maximum spindle speed of 24,000 rpm. The working field measures 3250 × 1250 × 1215 mm, with a rapid traverse speed of 100/50/20 m/min. Ideal for diverse CNC woodworking tasks, it also requires 7 bar of compressed air and has a dust extraction capacity of 3170 m³/h. Contact us for more information about this machine. Application Types CNC Wood Machining

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Tsdewp Rqfepfx Ac Nef Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 30,000.00 EUR (VAT is not included)

Condition: like new (used), engine power: 9 kW Tedox Arupepfx Ac Njf cutting length: 2000 mm automatic guide bar lubrication chain pitch: 3/4" year of manufacture: 2007 CE marking

Condition: used, total height: 2,450 mm, total length: 4,000 mm, total width: 2,000 mm, Empty weight: 6.300 kg Price: On request - Documentation available: No - CE certificate present: No - Control: Conventional - Motor power: 7.0kW - Drilling depth: 600mm - Spindle speed max.: 1000rpm - Model: terbank - Digital readout: Yes - Tool holder: ISO 40 - Table width: 800mm - Table length: 1000mm - Travel X: 800mm - Travel Y: 800mm - Spindle diameter: 75mm - Travel Z: 100mm - Type digital: Sony - Number of axes: 3 - Spindle speed min.: 13rpm - Transport dimensions: 4000mm x 2000mm x 2450mm (l x w x h) - Transport weight [kg]: 6300kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT Tjdpfewr Drhox Ac Njf VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2014, Empty weight: 7.400 kg Auction item. Wood chipper in working condition. Recommended to use a tractor from 120 HP. Pick-up opening: 600x400mm. Loading table track: 18,000x555mm. Open type shredding rotor with 12 replaceable knives 108x60x7mm. Hydraulically adjustable exhaust "chimney". Replaceable sieve. Sieve holes: 80x80mm. Tedpfx Aoxzfy Nsc Njf Farmi 5881 crane, crane reach 8.1m - 385kg, year of manufacture 2014. The shredder has an output of about 1 500 engine hours. New wood grabs. Video:

Year of construction: 2025, condition: new, functionality: fully functional, Professional Drum Dryer: SB-3000 OPTIMECH For sawdust, wood chips, peat, flax, hemp, grain, biomass, manure, corn, rapeseed, tobacco leaves, mint, herbs, plastic granulate, copper, aluminum, sand, fruits, vegetables, stones, seeds, mushrooms, bread, etc. Complete unit, ready for operation. Our dryers have been operating trouble-free at our clients’ facilities for over 15 years. The machine is adapted for almost any type of raw material. The material has absolutely no contact with exhaust gases or open flame. Drying is carried out by a heat exchanger, exclusively using hot air. No risk of self-ignition or scorching of material (drying temperature is adjustable). The dryer operates best in enclosed spaces with an ambient temperature of at least +10°C. Efficiency: removal of approx. 10-15% moisture/hour; - drum rotation power supply: 1.1 kW (very low power consumption thanks to a large gear wheel); - hot air heater power supply: heating oil/diesel fuel; - heating oil consumption: approx. 5 L/hour; - total electricity requirement: approx. 3 kW; - high-performance Italian fans (2x 2500m3/h); - exhaust gases discharged exclusively in one location; - mechanical steam extraction with cyclone separator; - rotary heat recovery system (entirely made of stainless acid-resistant steel); - safe and easy to operate; - drum rotation: left/right; - control cabinet and all electrical connections performed by a qualified electrician; - all spare parts available immediately, we are the manufacturer of the machine; - possible custom modifications according to individual customer requirements; Tjdpfx Ajv D D Axsc Nof - we have a complete machinery park and a spacious production hall at the same location for 40 years, we are honest, transparent, always available by phone, and ready to assist. Single batch capacity: up to 1.5 m3. Thermal power: 40-100 kW. Drying temperature adjustment (controller with temperature sensor). Reliable oil burner from renowned brand: LAMBORGHINI. Option to purchase the machine without the horizontal conveyor visible in the photos and video.

Year of construction: 2022, condition: ready for operation (used), General Data Machine weight 3700 kg Main Drive Spindle speed range 24000 Spindle motor power 8.5 kW Number of axis 3 Movement X-Axis Rapid Traverse 80 m/min Y-Axis Rapid Traverse 80 m/min Tsdsxxduyjpfx Ac Nof Z-Axis Movement 250 mm Z-Axis Rapid Traverse 12 m/min Tools Type of tool holder HSK 63F Additional Equipment Remote Control Pendant Z-axis Tool Length Sensor 4 Vacuum Suction Cups // 4 Additional Positioning Pins (long) Automatic Dust Shoe Height Adjustment // Automatic Part Pushing System Receiving Table for Finished Parts (2800 x 2070 mm) Loading Table (2800 x 2100 mm, 2000 kg Capacity, 500 mm Stack) CNC Control System TPA – WSCM Straight-line Nesting Software (Included) Pneumatic and Electrical Preparation for Drill Head Upgrades ECO Mode for Energy Saving This 3-axis INFOTEC 3121 PRO EVO was manufactured in 2022. It features a working area of 2200 x 3100 mm, Z-axis travel up to 350 mm, and a high-speed main spindle with a power of 8.5 kW and speed range up to 24,000 RPM. Equipped with a 14-position tool magazine and a robust vacuum table with 6 zones. Ideal for advanced CNC wood machining. Contact us for more information about this machine. Application Types CNC Wood Machining

Condition: used, Year of construction: 2015, operating hours: 2,055 h, 2015 | Dücker HM 200 Wood Chipper | Used Shredder | 2055 hours 📍Location: Germany, Rheine 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 14400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 14 inspection points 12 approved ✅ 0 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39537 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals Tjdoxyvhnepfx Ac Njf ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, functionality: fully functional, Equipment: CE marking, SRB - Vranje Construction Project specializes in the production of complete pelletizing equipment with capacities from 500 kg/h up to 6 t/h. We manufacture the following: Boilers Dryers Silos Mixer with conditioner Mill Pellet cooler Presses Conveyor belts Mixers Dedusting systems Crushers All our equipment comes with a 1-year warranty. 24h service support We offer the following services: Tsdpfx Asxqd T Hoc Nef Equipment installation Diagnostics Servicing Line maintenance Staff training Commissioning All inquiries and requests can be sent by email or by phone on working days from 09:00 to 17:00.

Condition: like new (used), Year of construction: 2021, Schuster® Wood Chipper LL600 PLLA only 500 operating hours The Schuster LL600 Polywood Wood Chipper is among the most efficient and economical machines of its kind. Thanks to the special rotor design, maximum efficiency is achieved with comparatively low motor power. Benefit from our many years of experience in mechanical engineering with this advanced wood processing system. Your Advantages: - State-of-the-art technology – robust build quality - Space-saving design - Powerful performance with low connected load - Special cutting rotor for maximum throughput - Reusable cutting tools - Tooth plate made from special steel - Belt drive for vibration damping - 2,000-hour warranty on the high-performance gearbox - Interchangeable screens with various hole sizes - Intelligent PLC control with contaminant shut-off (incl. 5 m cable) Technical Specifications: Dimensions: 1150x1130x1920 mm (LxWxH) Motor power: 11 kW Rotor speed: 570 rpm Rotor diameter: 280 mm Number of cutting tools: 34 Cutting width: 600 mm Throughput capacity: 0.6 – 1.7 m³/h Tsdex Ah Dmopfx Ac Njf Suction nozzle: 200x200 mm Weight: 920 kg Year of manufacture: 2021

Condition: excellent (used), CATALOG NUMBER 7726 TECHNICAL DATA - Feed hopper inlet – hydraulic lift 1200x1000mm - Discharge outlet for shredded wood diameter 200mm - rotor working width 980mm - Main motor 37kW - Number of knives 52 pcs - Knife size 40x40mm - Screen 20/25mm - Pressing drawer (hydraulic pusher) - Electric auto-reverse - Dimensions (L/W/H) 2520x2000x1740mm - Weight approx. 2500kg ADVANTAGES – German made – Screw conveyor (for wood chips) – Pressing drawer, serrated – Knives as new – New counter-knife – Very good condition – Used chipper Tedsw Tbw Aepfx Ac Njf Net price: 106,900 PLN Net price: 25,450 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: excellent (used), Year of construction: 2007, operating hours: 9,300 h, functionality: fully functional, Shredder Doppstadt DW3060 Year of manufacture: 2007 Magnet over the conveyor belt. Operating hours: 9300 mth Price: 59,000 EUR Todjx Ap Aqspfx Ac Njf

Condition: ready for operation (used), Year of construction: 2019, General Data Machine weight 1500 kg Measurements height 1250 mm Todpfx Acoxzltce Nof Dimensions Machine Length 2200 mm Technical Specification Working Width 930 mm Feed Speed 12 m/min This WINTER MBS 930 was manufactured in 2019. It features a motor power of 22.0 KW and a spindle diameter of 74 mm. The saw blade diameter is 205 mm, and it operates at a speed of 2600 rpm. Feed speed ranges from 0 to 12 m/min. Ideal for precise wood cutting. Contact us for more information. Application Types Sawing (Wood)

Year of construction: 2025, operating hours: 24 h, condition: new, functionality: fully functional, machine/vehicle number: AVB-48, AVB-48 Wood Shaving Machine Heavy-Duty Performance. Industrial Reliability. The AVB-48 is one of our most popular heavy-duty wood shaving machines, engineered for high industrial capacity and consistent performance. Designed to process both round logs and offcuts with minimal material size requirements, this model is ideal for log shaving as well as wood waste processing. Built with a robust, long-lasting body structure, the AVB-48 ensures durability even under intensive use. It comes equipped with T.C.T. carbide blades for superior cutting precision and extended service life. Also, we can be equipped with straight blades for horse shavings production as well. For enhanced versatility, the machine can be fitted with an optional hopper pressing system—perfect for handling small pieces and offcuts efficiently. The AVB-48 supports both planer blade and carbide blade working principles, offering flexibility to match your production needs. TECHNICAL DETAILS; TECHNICAL SPECIFICATIONS AVB-48 or AVB-48HELIX Number of Cutterheads 4 Length of Cutter Head 60 cm Number of Blades 190 T.C.T. blades/cutter head or 7 straight blades Power Supply 4 *11 KW = 44 KW (59 HP) Hopper Working Hydraulic Hopper Dimensions 1500*600*900 mm Working Voltage 380 V 50-60 Hz Conveyor Band Motor 0,75 KW Hydraulic Motor 7,5 KW Total Power 52,25 KW Cutterhead Speed 3000 rpm Cutterhead Diameter 160 mm Tjdpfx Aexwizpjc Nsf Shaving Depth 0,2 mm - 1,2 mm Max.Log Input Length 75-150 cm Max.Log Input Width 10 - 45 cm Working Distance 1200 mm Machine Dimensions L4300 x H1700x W1600 mm Weight 3.500 kg Production Capacity 1000-1200 kg/h

Condition: used, Year of construction: 2001, functionality: fully functional, Two pneumatically lowered heads with 330 mm diameter saws. Left head – stationary, right – movable. Cutting heads of P models are tilted with the help of pneumatic cylinders. Has a “two-hand” control mode and an instant saw stop device. General characteristics 1 Motors 2 pcs. x 1.1 kW, 380 V 2 Number of revolutions 3765 rpm 3 Saw diameter 330 x 30 mm 4 Saw head tilt 90º- 45º 5 Rotation -45º- 90º- 45º 6 Max. cutting length 3335 mm, Todpfxsxytnle Ac Nef 7 Min. cutting length (all models) when heads are turned inward 45º 420 mm 8 Min. cutting length when heads cut at an angle of 90º 365 mm 9 Max. dimensions of cut workpieces when cutting 45º (HxW) 90 x 100 mm 10 Max. dimensions of cut workpieces when cutting 90º (HxW) 90 x 145 mm

Condition: used, Wood shredder Weima Tjdpfjxyx Nnox Ac Nef Manufacturer: Weima Model: WL18/45 Country of manufacture: Germany Year of manufacture: 1997 Number of knives: 58 Rotor diameter: 368 mm Weight: 4000 kg Electric motor: 45 kW Included: Feed conveyors Vibrating conveyors Discharge belt conveyors

Condition: excellent (used), CATALOG NUMBER 7770 Todpfx Ajxl Dztjc Njf TECHNICAL DATA - Inlet width 260mm - Inlet height 240mm - Shaft width 350mm - Shaft diameter 350mm - Number of knives 2 pcs - Sieve size 28mm - Outlet diameter 210mm - Auto-reverse - Upper track, feed system 1.1kW - Lower toothed feed roller, 2 pcs, 0.75kW - Feed belt length 3700mm - Feed belt width 250mm - Main motor 22kW - Overall dimensions L/W/H 5400x1000x1200mm - Weight of machine and feeder 1600kg ADVANTAGES – Made in Germany – Auto-reverse – With conveyor belt – Used chipper, very good condition Net price: 38,900 PLN Net price: 9,260 EUR at exchange rate of 4.2 EUR (Prices may vary with significant fluctuations)

Condition: excellent (used), Year of construction: 2023, operating hours: 1,800 h, functionality: fully functional, Doppstad AK 640/K Year of manufacture: 2023 1800 operating hours First owner Spraying system Magnetic separator Tsdpfx Acox Apzao Nsf Price: €425,000.00 Leasing available until 09/2028, can be taken over.

Year of construction: 1995, condition: ready for operation (used), This CASATI BIG 2600 was manufactured in 1995. It features a double-knife system with both upper and lower knives that trim veneer bundles from both sides simultaneously, ensuring precise cuts. The machine offers a substantial working width with a usable cutting length of 2600 mm, ideal for preparing veneers for furniture and doors. Consider the opportunity to buy this CASATI BIG 2600. Contact us for more information. Application Types Other Woodworking Machinery Tjdpfoxyl Siex Ac Nef

Year of construction: 2023, condition: new, TECHNICAL DESCRIPTION OF AVB-HELIX100BB The size of the log hopper can be adjusted to meet the customer's needs. The hopper dimensions are 230-250 cm in length, 100 cm in width, and 110 cm in height. The cutter heads are designed to be movable for simple operation. The hopper speed is adjustable to control the thickness and amount of shavings produced. It also has a sensitive shaving type for continuous use. The hopper is constructed with heavy-duty steel and has a total weight of 7,000 kg. Its dimensions are 540 cm x 165 cm x 185 cm. The cutter heads are run by two electric motors, each with a power of 37 kW. They operate at 3,000 RPM and are equipped with inverters. The production rate for shavings is between 2,800 and 3,000 kilograms per hour. double hydraulic cylinder to move the log hopper. We offer a cutter head design that is particularly suited for small flake production, with the added benefit of being available for chicken farms. Additionally, we also have a larger flake option that would be suitable for horse stables. Our cutter heads are equipped with T.C.T. carbide blades and designed in a spiral helix type to create mini flakes. We place 400-500 pieces of carbide blade to ensure top-quality wood shavings for animal bedding industries. The size and thickness of the shavings can be easily controlled by adjusting the head RPM and the travel speed of the hopper. Our bearings cups are equipped with high-quality heavy-duty types such as COC, TIMKEN, or SKF. Adding lubrication oil is hassle-free. Our hydraulic motor has 15 KW power with a speed control unit drive. Additionally, we have an anti-jamming system between the plate and the hopper to prevent splinters. Our machine can handle any type of wood, including slabs, about to the shape of the cutter heads. You can also use off-cuts and all types of residues for perfect results. If needed, we can add a pneumatic press to the machine hopper for even better performance. TECHNICAL SPECIFICATIONS AVB-HELIX100BB Number of Cutterheads 2 Operation Length of Cutter Head 100 cm Number of Blades 500 T.C.T / cutter head Power Supply 2 *37 KW = 74 KW( 99,23 HP) Hopper Working Hydraulic Hopper Dimensions mm 2200*1000*1000 Working Voltage 380 V 50-60 Hz Conveyor Band Motor 1,5 KW Hydraulic Motor 15 KW Total Power 90,5 KW Cutterhead Speed 3000 rpm Cutterhead Diameter 250 mm Shaving Depth 0,03- 0,5 mm Max.Log Input Length 150-220 cm Max.Log Input Width 10-95 cm Working Distance 2200 mm Machine Dimensions L5400xH1650xW1850 mm Tsdpfx Ajnl Efxoc Njf Weight 7.000 Kg Production Capacity 3000 kg/h

Condition: excellent (used), Year of construction: 2003, Description to follow! Tjdpfxexyllpj Ac Nef

Condition: used, For sale: Salmatec Maxima 700 pellet press in full working condition, installed in a Rematec container with electrical cabinet and a tent shelter. Capacity – up to 3 t/h. The line includes: - Press and hammer mill: Salmatec – reliable German quality with high efficiency and durability. - Conveying and dosing equipment: Rematec – robust and precise material handling at every stage. - Additional equipment: cyclones, sieves, cooler, control cabinet, etc. - Tent shelter. Key advantages: Tjdpfx Acjit I Rte Nsf - High production capacity – up to 3 t/h. - High-quality European manufacturer components. - Suitable for professional pellet production from wood biomass, agro-biomass or other raw materials. - Fully operational line – demonstration possible. - Available immediately. Dismantling and transport are to be arranged by the buyer. We can recommend a company to assist with this process. The equipment can be inspected in full working order in Sweden. All foundation drawings and DWG files are available. Price: EUR 650,000

Condition: used, functionality: fully functional, Locatelli Ariete 3 automatic lathe machine Length of scantling max/min 1000/200mm Scantling size max/min 85×85/20x20mm Maximum workpiece length 120mm with hole 150mm without hole Automatic material feeder Complete DTR documentation 3/4kw main motor Two spindle speeds 2500/3600rpm Oil pump motor 2.2kw Working pressure 6-8bar Tjdju Rqkmepfx Ac Nof

Condition: used, Rotor diameter: 200 mm Rotor width: 270 mm Todpfx Asxyax Rsc Njf Rotor knives: 3x6 Stator knives: 2 Feed opening approx. 200 x 270 mm Drive motor: 3 kW

Condition: used, machine/vehicle number: 4966, Rotor diameter: 200 mm Rotor width: 180 mm Tjdpfoxyax Djx Ac Nef Rotor blade: 3x4 Stator knives: 2 Inlet cross-section approx. 200 x 180 Drive motor: 3 kW