Used Wood Pellet Mills for sale (14,555)

Condition: used, functionality: fully functional, Year of construction: 2015, Palletizer and pallet wrapper Capacity 100 kg / h Used, no warranty This machine is located in Tata, Hungary. What is Pellet? Pellets are a natural biofuel made from made from agricultural and forestry wastes, such as dried sawdust, compressed into small cylinders with a diameter of a few millimetres. It possible to obtain a compact product with no additives and chemicals. Dkjdpfxjtw Szae Afusi Benefits of pellets? Among the most important advantages: environmental sustainability (reduction of deforestation and GHG emissions); cheap to produce and affordable to buy. And, due to the pressing process, the calorific value of pellets is approximately double that of wood for the same volume.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 Dedeq Igyvepfx Afuski 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: used, Year of construction: 2005, functionality: fully functional, cutting length (max.): 6,500 mm, input voltage: 400 V, - Year of manufacture: 2005 - Electrical diagram - Electric motor: 15 kW - Log cutting length: up to 6.5 meters - Control: stationary control panel - Additional equipment: - Hydraulic loading - Hydraulic hold-down - Hydraulic log turner - Roller adjustment - Debarker (for removing bark prior to cutting) - Dual-function hold-down - Side stops - Leveling rollers Machine dimensions: - length: 750 cm - width: 220 cm - height: 240 cm - weight ~1700 kg Dedoyrdg Dopfx Afuski

Condition: excellent (used), functionality: fully functional, machine/vehicle number: B0xanbytvo, power: 35 kW (47.59 HP), TSF ring die pellet machine Automatic bearing lubrication system Cooled differential Air conditioning Control cabinet Efficiency (depends on material) Dksdpfxoyrf Ezs Afusi Engine power 35 kW Different pellet diameters (selectable) B0xanbytvo Pellet press ring die diameter – 8 mm Material requirements before entering pellet press – moisture 8–16% Main motor with inverter Electrical cabinet with numeric parameter control.

Condition: excellent (used), MX7504 CNC Wood Router – Automatic Tool Change – Industrial Woodworking Machine For sale: MX7504 CNC woodworking router, suitable for furniture production and automated wood processing. The machine is equipped with an automatic tool change system (ATC) and a touchscreen CNC control, allowing precise and efficient machining. Technical specifications Model: MX7504 Type: CNC wood router Axes: 3-axis CNC Automatic tool changer (ATC) Spindle motor: approx. 4–6 kW Control system: touchscreen CNC Power supply: 380 V / 3 Phase Heavy industrial construction Applications Furniture manufacturing Dkodeyq Riijpfx Afuei Panel processing MDF / plywood machining Automatic drilling and milling Condition Machine is in good working condition and ready to use.

Year of construction: 2019, condition: ready for operation (used), overall weight: 12,000 kg, total height: 4,500 mm, This LINYI JIANZHONG WOOD MACHINERY JJC-CP was manufactured in 2019. It features a maximum pressure of 500 tons, adjustable for various applications, and can handle filling sizes up to 1300 x 2500 mm. With a capacity of 6 batches per hour and a total weight of 12000 kg, this carcase press is CE marked, ensuring compliance with safety standards. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max pressure: 500 t (adjustable) • Filling height: 900 - 1300 mm • Max filling size: 1300 x 2500 mm • Press position: approx. 500 mm below floor level • Feeding table: 2000 x 1960 mm • Pick-up table: 2350 x 2500 mm • Capacity: 6 batches per hour • Ce marking Extra Information Dodpfxjyaqgme Afujki Machine still under power Dimensions Machine Depth 3600 mm

Condition: new, Year of construction: 2022, functionality: fully functional, We offer this stationary WOOD MIZER EG300, in new condition, year of manufacture 2022. Manufacturer: WOOD MIZER Model: EG300 Year of manufacture: 2022 Condition: new Dkodpfx Aeyngfbsfuji Type: stationary If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2023, cutting width (max.): 550 mm, overall weight: 800 kg, Wood-Mizer MS750L Panel Saw for Professional Cutting of Furniture Boards Machine used for training and demonstrations, serviced and factory-set. Processing parameters: Max. cutting thickness (perpendicular): 97mm Max. cutting thickness at 45°: 69mm Cutting length: 3020mm Technical specifications: Main saw blade Spindle diameter: 30mm Saw blade diameter: 300-400mm Blade tilt adjustment range: 0-45° Saw blade speed: 4500 rpm Scoring unit Scoring spindle diameter: 20mm Scoring blade diameter: 120-125mm Scoring blade speed: 8000 rpm Sliding table (aluminium) Table length: 3020mm Table width: 416mm Table stroke length: 3580mm Dsdpfx Afjyr Dg Dsueki Working table (cast iron) Table length: 1050mm Table width: 550mm Table height: 885mm Table extension: 895x1000mm Main motor: 6kW Scoring motor: 0.75kW Electric adjustment of blade height and tilt Pneumatic longitudinal clamp with distribution Extraction ports: 1x100mm, 1x60mm Weight: 800kg

Condition: as good as new (ex-display), Year of construction: 2022, Wood-Mizer MS300 High-precision table saw Machine used for training and demonstrations, checked and factory-adjusted. Processing parameters: Max. thickness at perpendicular cut: 100 mm Max. thickness at 45° cut: 65 mm Technical specifications: Dsdpfxeyr Dfae Afuoki Circular saw Arbor diameter: 30 mm Saw blade diameter: 315 mm Max. blade width: 4 mm Blade tilt adjustment range: 0–45° Distance between blade and parallel fence: 800 mm Saw blade speed: 4,500 rpm Sliding table (aluminum): Table length: 1,400 mm Table width: 350 mm Sliding stroke: 1,235 mm Sliding table extension: 500 x 360 mm Working table (cast iron): Table length: 900 mm Table width: 750 mm Table height: 850 mm Table extension: 520 x 150 mm Motor: 3 kW Extraction ports: 1x100 mm, 1x60 mm Weight: 260 kg

Condition: as good as new (ex-display), Year of construction: 2024, Wood-Mizer MP365 High-end four-sided planer/moulder with additional fifth head Machine used for training and demonstrations, checked and factory set. Machining parameters: Four-sided: Planing width: 15–350 mm Planing height: 10–160 mm Double-sided: Planing width: 10–410 mm Planing height: 10–230 mm Single-sided: Planing width: 10–510 mm Planing height: 10–230 mm Feed speed: 3–15 m/min Technical specifications: Top shaft – straight knives 510 mm, 2 pcs, 6000 rpm Bottom shaft – straight knives 410 mm, 2 pcs, 6000 rpm Side shafts – 30 mm spindle, straight knives 50 mm, 2 pcs, 6000 rpm, max side head height 160 mm Fifth shaft – 30 mm spindle, 3000, 6000, 9000 rpm, tilt angle 270°, max head height 130 mm Motors: Top shaft – 5.5 kW Bottom shaft – 4 kW Dedpeyr Ddvofx Afuski Side shafts – 3 kW Fifth shaft – 3 kW Feed – 0.75 kW Total motor power: 19.25 kW 3 phase, 400 V, 50 Hz, 31.4 A Extraction ports – 4x100 mm, 1x125 mm Weight: 1055 kg

Condition: as good as new (ex-display), Year of construction: 2024, Wood-Mizer MP260 Compact and versatile four-sided planer moulder Machine used for training and demonstrations, inspected and factory-set. Fitted with a new polyurethane feed roller. Processing parameters: Four-sided: Planing width: 40–260 mm Planing height: 10–100 mm Double-sided: Planing width: 10–300 mm Planing height: 10–220 mm Single-sided: Planing width: 10–410 mm Planing height: 10–220 mm Constant feed speed: 8 m/min Djdpfx Afsyr Dc Ejuski Technical specifications: Top shaft – straight knives 410 mm, 2 pcs, 6000 rpm Bottom shaft – straight knives 300 mm, 2 pcs, 6000 rpm Side shafts – 30 mm spindle, straight knives 50 mm, 2 pcs, 6000 rpm, max. height of side heads – 100 mm Motors: Top shaft – 3 kW Bottom shaft – 3 kW Side shafts – 3 kW Feed – 0.25 kW 3-phase, 400 V, 50 Hz, 27.45 A Extraction ports – 3x100 mm, 1x125 mm Weight 440 kg

Condition: used, Year of construction: 2022, Wood-Mizer MP260 Compact and versatile four-sided planer/moulder Machine from the Wood-Mizer machine exchange program, inspected and factory set. Excellent technical condition, long tables, new side pressure rollers, polyurethane feed roller, sharp knives. Machining parameters: Four-sided: Planing width: 40–260 mm Planing height: 10–100 mm Two-sided: Planing width: 10–300 mm Planing height: 10–220 mm Single-sided: Planing width: 10–410 mm Planing height: 10–220 mm Feed speed adjustable: 2–11 m/min Technical specifications: Top shaft – straight knives 410 mm, 2 pcs, 6000 rpm Bottom shaft – straight knives 300 mm, 2 pcs, 6000 rpm Side shafts – 30 mm spindle, straight knives 50 mm, 2 pcs, 6000 rpm, max. side head height – 100 mm Motors: Dkodpoyr Dcrofx Afuji Top shaft – 3 kW Bottom shaft – 3 kW Side shafts – 3 kW Feed – 0.37 kW 3-phase, 400 V, 50 Hz, 27.45 A Extraction ports – 3 x 100 mm, 1 x 125 mm Weight: 440 kg

Condition: as good as new (ex-display), Year of construction: 2024, Wood-Mizer MP200 Dksdpfxsyr Dcle Afuei Planer-Moulder Simultaneously planes and profiles from both sides Machine used for training and demonstrations, inspected and factory-set. Working parameters: double-sided planing width 10-300 mm planing height 15-100 mm min material length 470 mm single-sided planing width 10-400 mm planing height 15-210 mm Feed speed 2-11 m/min Technical specifications: upper shaft – straight knives 410 mm, 2 pcs, 6000 rpm side shaft – spindle 30 mm, straight knives 50 mm, 2 pcs, 6000 rpm Motors: upper shaft – 2.7 kW side shaft – 2.7 kW feed – 0.37 kW 3-phase, 400 V, 50 Hz, 16A Extraction ports – 1x100 mm, 1x125 mm Weight 370 kg

Condition: as good as new (ex-display), Year of construction: 2022, Wood-Mizer MP180 Universal planer – jointer, double-sided planer, spindle moulder. Machine used for training and demonstration purposes, fully tested and factory set. Dkjdpfx Aeyr Dcfofuoi Processing parameters: Double-sided: planing width: 10-300mm planing height: 10-100mm Single-sided: planing width: 10-400mm planing height: 250mm Feed speed steplessly adjustable 2-11 m/min Technical specifications: Upper shaft – straight knives 410mm, 2 pcs, 6000 rpm Side shaft – spindle 30mm, straight knives 50mm, 2 pcs, 6000 rpm Motors: Upper shaft – 4kW Side shaft – 3kW Feed – 0.37kW 3 phase, 400 V, 50 Hz, 16 A Extraction ports – 2x 100mm Weight 362kg

Condition: excellent (used), Year of construction: 2024, Model: CNC5003 Notes: Condition: Ex-demo CNC5003 is a state-of-the-art CNC machine, designed from the ground up to industrial standards for durability and process stability. The machine is specifically engineered for wood, panel materials, plastics, foam, composites, and light alloys. Dkjdpfxsyr Daws Afuji • FANUC controller • Working area: X - 3080 mm Y - 1540 mm Z - 200 mm • 6-zone vacuum table • HSK63 11kW 24000rpm electrospindle • Tool magazine (12 slots) Additional information • The vacuum table is divided into 6 zones, each with an individual valve. Each zone features 36 individually sealed vacuum points, providing a total of 216 individually sealable vacuum points. • Electrospindle: Our standard spindle motor is a high-power 11 kW unit with HSK63F. The spindle is driven by an inverter and reaches speeds up to 24,000 rpm. The spindle motor is equipped with ceramic bearings. • Automatic Tool Changer (ATC): The machine comes with a 12-position tool changer mounted on the gantry for fast tool changes. • The ATC magazine is conveniently accessed via a hatch for easy maintenance.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, operating hours: 2,520 h, type of input current: three-phase, cutting length (max.): 4,800 mm, saw blade length: 4,010 mm, Wood-Mizer LT20B bandsaw, equipped with the corresponding BMS 250 automatic blade sharpener and BMT 100 manual blade setter. Electric motor: - 11 kW Log cutting length: - up to 4.8 meters Control: - stationary control panel - electric height adjustment - electric dimension adjustment Additional equipment: - Cutting thickness counter - Blade lubrication system: Lube-Mizer - electric height adjustment - electric feed Dsdpox Hql Dofx Afuski Machine dimensions: - Length: approx. 750 cm - Width: approx. 220 cm - Height: approx. 240 cm

Condition: new, Year of construction: 2023, cutting length (max.): 5,100 mm, cutting width (max.): 860 mm, saw blade width: 380 mm, saw blade length: 5,000 mm, WM4000S industrial band saw with operator's cabin Drive: Electric motor: 22 kW Cutting parameters: Maximum cutting length: 5.1 m with board removal system Maximum cutting width: 86 cm Bed and head: Debarker Head movement (front/back): electric Advanced touchscreen display Saw guide arm: electric Double saw guide roller Automatic saw lubrication Pneumatic saw tensioning Servo motor (up/down) Board removal conveyor 1.7 m Pantograph Reinforced bed Hydraulics: 2 vertical side supports 2 chain turners 1 main clamp 1 drive roller 1 side roller 2 clamps Dkjdpfx Afjypk Rdjuoi Hydraulic pump 7.5 kW Saw blade: Length: 5000 mm Width: 38 mm Wheel diameter: 635 mm Year of manufacture: 2023 Price: PLN 530,000.00 PLN 399,000.00

Condition: used, Year of construction: 2019, operating hours: 26,917 h, functionality: fully functional, cutting length (max.): 6,100 mm, saw blade width: 380 mm, saw blade length: 4,670 mm, Machine specification: LT70ME20SAH3-SWR CUTTING DIMENSIONS: - max log diameter: 95 cm - clearance between rollers: 73 cm - max cutting height: 39 cm HEAD EQUIPMENT: - SW-10 SETWORKS automatic cutting thickness setting device - head feed up/down – electric - head feed forward/backward – electric - blade guide arm – electric SAWBLADE – length 4670 mm, width 38 mm Blade guide wheels: 600 mm Type: with belt Material: cast iron STANDARD HYDRAULICS: - 3 side supports - central clamp on two rods - comb-style log turner - 2 x leveling rollers - 2x dual-function clamps - loading arms Used machine, fully technically refurbished. All components checked and replaced as necessary. Very good technical condition, fully ready for operation. Additional advantage: extended warranty – 6 months. Djdjypk E Ujpfx Afuski YEAR OF MANUFACTURE: 2019.09.04 ENGINE HOURS: 26,917 Price: 110,000 PLN net

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 240, power: 60 kW (81.58 HP), Equipment: documentation/manual, Complete pellet plant consisting of wood grinder, sawdust pulverizer, pellet powder storage silos, pellet pressing machine plus conveyor belts, pellet collection silos and weighing system for bags or big bags. Dsdpfswiik Rox Afujki Complete plant with all automations

Condition: used, Year of construction: 2024, The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistatic moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Size of the machine: Djdpfx Afsun N Ausueki Width: 2,280 mm Installation length: 500mm

Condition: reconditioned (used), Year of construction: 2019, machine/vehicle number: WM1000MEH40S, functionality: fully functional, operating hours: 197 h, power: 30 kW (40.79 HP), type of input current: AC, cutting width (max.): 1,700 mm, actuation type: electric, total length: 10,000 mm, year of last overhaul: 2025, A powerful and extremely robust industrial sawmill with an impressive cutting capacity of up to 170 cm trunk diameter is available for sale. The machine is fully operational and in very good condition with only 197 operating hours. Ideal for professional users, large-scale woodworking and businesses with high demands on precision and performance. Technical data & equipment: Dkjdpfxjypkc Hj Afusi - 30 kW electric motor – powerful and efficient - Log diameter up to 170 cm Ø - Electric height adjustment - Electric feed - Integrated cutting thickness calculator for precise results - Cutting length 6.5 m, optionally extendable - Includes 10 m rail system - Year of manufacture: 2019 - Only 197 operating hours - Fully operational - 2-year warranty This is an opportunity to purchase a powerful machine with very low mileage at well below the original price. Item number: 25-G07 / WM1000MEH40S Note: The photos shown are examples and may differ from the sawmill actually offered. If you are interested or have any questions, please do not hesitate to contact us. We will be happy to send you further information at any time upon request.

Condition: reconditioned (used), Year of construction: 2022, operating hours: 1,025 h, functionality: fully functional, machine/vehicle number: LT70LG57SDH15-3.0AC, cutting length (max.): 8,400 mm, overall weight: 3,000 kg, height adjustment type: electric, tooth pitch: 22 mm, saw band length: 4,670 mm, saw band width: 38 mm, input current: 16 A, Equipment: chassis, LT70 mobile sawmill – built in 2022 – top-of-the-range equipment – 57 hp – 1-year warranty A very well-equipped mobile sawmill (built in 2022) with approx. 1,025 operating hours is for sale. The machine is in good condition and ready for immediate use. Thanks to its extensive range of features, it is ideal for professional users, contract sawmills or larger wood processors. Technical data & features: - 57 hp petrol engine - up to 95 cm Ø - AccuSET II cutting thickness calculator - Cutting length 8.4 m (optionally extendable) - Electric feed & height adjustment - Pre-cutter - LubeMizer belt lubrication system - Radio remote control Dedpfx Ajypiz Uofuski - Hydraulic package 15 log turner, centre clamp, 4 pull-down clamps, 3 compensation rollers, 1 of which is driven, loading arm) - 3.0 t double axle - Year of manufacture: 2022 - Approx. 1,025 operating hours - 1 year warranty Item number: 25-G04 / LT70LG57SDH15-3.0AC

Condition: used, Wood-Mizer HR110 Single-Head Resaw for Lamellas Model HR110EH7.5S-1, Dksdpfxeym N Hxj Afuei 5.5 kW motor, Manual up-down adjustment of the saw head, Head tilt adjustable from 0-8 degrees, Maximum cutting width: 40 cm, Maximum cutting height: 280 mm, Minimum cutting height: 5 mm, Minimum lamella thickness: 5 mm, Feed speed adjustable via inverter, The machine is in full working order.

Condition: new, Year of construction: 2025, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. Dodshgbarspfx Afuoki We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h We produce: Drum dryer Belt dryer pipe dryer Pellet plant Mills crushers Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas

Condition: excellent (used), Year of construction: 2022, Horizontal 6-Head Resaw Year of manufacture: 2022 Technical data: Motor: Dkodpfjylw Sajx Afuei Electric 11 kW Cutting dimensions: Max. cutting width (cant timber): 30 cm Max. cutting height: 20 cm (18 cm with electric feed) Min. cutting height: 0.6 cm Min. material length: 120 cm Feed system: Steel belt conveyor Feed speed: 0 – 20 m/s Saw band: Length: 4010 mm Width: 32 mm / 35 mm Band wheels: Diameter: 600 mm Multisetwork – Allows cutting height of each individual unit to be set via the control panel. Technical condition: very good. Technical documentation and further photos are available.