Used Ycm for sale (18)

Condition: used, Year of construction: 2012, controller manufacturer: Fanuc, controller model: MXP-200FP - ManualGuide, _____ Description: Year of manuf. : 2012 Control : Fanuc MXP-200FP - ManualGuide Speed : 6000 rpm Movement X/Y/Z : 2100/1020/762 mm Tool holder : SK 50 Redpozf T I Nefx Amnsw In General: Year of manufacture:2012 Control system:Fanuc MXP-200FP ManualGuide Traverse paths X/Y/Z:2,100/1020/762 mm Spindle speed:6,000 rpm Tool holder:SK 50 Clamping surface:2,300 x 1020 mm Spindle: Technology:Geared spindle Speed:6,000 rpm Max. power:approx. 22 kW Max. torque:approx. 550 Nm Tool holder:SK 50 Work table: Clamping surface:2,300 x 1020 mm Max. table load:3,000 kg T-slots:6x 22 mm, spacing 150 mm Tool magazin: Technology:Chain magazine Tool changer:Double gripper Number of stations:40 pieces Tool diameter max.:120/240 mm Tool length max.:350 mm Equipment: Chip disposal: Chip conveyor Coolant supply:IKZ pump with filter Emulsion mist extraction:Mechanical Set-up mode:Electronic handwheel Accessories:2x magnetic clamping plate 800 x 400 mm Tool holders:Various SK 50 holders

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, torque: 18,500 Nm, controller manufacturer: Heidenhain, controller model: iTnc530, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, coolant supply: 30 bar, distance table center to spindle nose: 680 mm, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 90 mm, tool weight: 6 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Additionally, the machine is equipped with: - Spindle change-over gearbox - Flat guideways - Centralized oil lubrication Redpfsyh Ri Iex Amnew - Control cabinet cooler - Spindle oil cooler - Grundfos IKZ pump - Oil skimmer - Hand wheel - Renishaw 3D measuring probe - Signal lamp - Tool cabinet - Various tool holders

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Equipment: chip conveyor, rotational speed infinitely variable, 5-axis machining center. Redozhxngjpfx Amnow

Condition: ready for operation (used), Year of construction: 2010, spindle speed (max.): 3,000 rpm, travel distance X-axis: 275 mm, travel distance Z-axis: 1,283 mm, spindle motor power: 5,500 W, total height: 2,000 mm, total width: 1,195 mm, overall weight: 8,000 kg, controller manufacturer: FANUC, product length (max.): 2,950 mm, number of axes: 3, This 3-axis YCM GT-300LMB was manufactured in 2010. It features a maximum spindle speed of 3000 rpm and a chuck size of 12 inches. The machine offers an X-axis travel of 275 mm and a Z-axis travel of 1283 mm, making it suitable for various turning applications. If you are looking to get high-quality turning capabilities, consider the YCM GT-300LMB horizontal turning machine we have for sale. Contact us for further details. • Spindle bore: Ø100 mm • Chuck size: 12 in Technical Specification Counter Spindle No Driven Tools Yes Rjdpfjyv E Irox Amnow

Condition: used, YCM YEONG CHIN YCM - FV 56T is a Vertical machining center, designed for precision, high accuracy and reliability. Table 700×420 mm, 3 T-slots (14 mm) at 100 mm pitch, table load max 300 kg; travels X560 Y410 Z450 mm; 4 simultaneous axes. Tool changer 16 positions, BT30, tool Ø max 63 mm (100 mm with free pockets), tool length 200 mm, tool change 1 s; spindle 45–15,000 rpm; feed 10,000 mm/min; rapid X/Y 36 m/min Z 24 m/min; spindle power 3.7/5.5 kW; 3x400V 50Hz; weight ~2800 kg; dimensions 2630×1620×2240 mm. Accessories: 4th axis table (B), coolant system, spindle blow-out, automatic central lubrication, status light. Enables tight tolerances; suitable for automotive, aerospace, medical, watchmaking and machine tool sectors Rodpfoy S A H Rjx Amnow

Condition: like new (used), Year of construction: 2014, operating hours: 8,815 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, rotational speed (max.): 15,000 rpm, spindle nose: BT40, number of slots in tool magazine: 40, 5-AXIS MACHINING CENTER YCM TCV 3000A-5AX TECHNICAL SPECIFICATIONS • Model: YCM TCV 3000A-5AX • Year of Manufacture: 2014 • Control: Heidenhain (5-axis simultaneous) • Travel (X / Y / Z): 3,000 x 800 x 800 mm • B-Axis (Swivel Head): 110º • C-Axis (Rotary Table): Ø 800 mm • Spindle Speed: 15,000 RPM • Tool Taper: BT40 Big Plus • Tool Changer (ATC): 40-station magazine • Through-Spindle Coolant: 20 Bar Redszcx A Uopfx Amnsw • Probing Systems: Renishaw RMP60 workpiece probe & Renishaw TS-27R tool setter • Workzone Divider: Partition wall for pendulum machining • Chip Management: Chip conveyor included • Usage: General subcontracting / job shop environment. PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE)

Condition: excellent (used), With C-axis With driven tools FANUC TXP-200 FA control Turning diameter max 360 mm Turning length -683 mm Swing Diameter -450 mm Spindle speeds -3'000 rpm Top turret tool holders 12 driven positions Misc. accessories Rodpfx Amjq Dlt Sensw MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller manufacturer: FANUC, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3-axis YCM XV 560A was manufactured in 2011. It features a table size of 700 x 420 mm and impressive X, Y, and Z travels of 560 mm, 410 mm, and 450 mm, respectively. The machine is equipped with an 11 kW spindle power and a spindle speed of 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the YCM XV 560A vertical machining centre we have for sale. Contact us for further details. Rodpfxoy Duxvs Amnow • Table size: 700 x 420 mm • Condition: Very good; low hours; used in 1-shift production

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 12,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 12,000 rpm, Fanuc MXP200 travel: 1600X800X800MM spindle: BT40 maximum spindle speed: 12000 RPM tool changer: 30 tools spindle center coolant: 20 bar Rsdpfx Ajy R Ddzemnjw chip evacuator weight: 11000 KGS

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 660 x 510 x 560mm, Table size 840mm x 560mm, spindle speed 8,000rpm, 11kW spindle motor, Heidenhain TNC530i, Spindle taper BT40, 20 station ATC, Rjdpfxswc Twuo Amnjw coolant,

Condition: good (used), Year of construction: 2018, functionality: fully functional, Controller FANUC MXP-200FC Table size D380 mm Table load max 200 kg X travel 700 mm Y travel 520 mm Z travel 480 mm A axis +30/-120 degree C axis 0-360 degree Spindle speed 12000 rpm Tool holder type BBT40 Rapid speed 36/36/24 m/min Feedrate 1 - 100000 mm/min Max tool diameter and length D78 x 280 mm Max tool weight 6 kgs Spindle power 22,5 kW ATC magazin 30-fold Power required 46 kVA Redpfx Aer I Az Tomnew Accessories, features - CTS - integrated 4/5 axis - Coolant unit - Chip conveyor - Mist collector - external hydraulic - manuals The machine is still under power and can be inspected in function. Ready to buy.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis YCM NXV560A was manufactured in 2014. It features a direct-drive spindle with a speed of 12,000 rpm, a 28-station arm-type tool changer, and a belt-type chip conveyor. The CNC control is iTNC530 HSCI, and it has XYZ travels of 560, 410, and 450 mm respectively. Consider the opportunity to buy this YCM NXV560A vertical machining center. Contact us for more information. Redpfx Amex D Dttonew • Tool magazine: 28 stations, arm-type random changer • Coolant through spindle: 20 bar Additional equipment • Chip conveyor: Belt-type

Condition: used, Year of construction: 2014, operating hours: 17,500 h, functionality: fully functional, Technical details: Travel distance X-axis: 1,020 mm Travel distance Y-axis: 600 mm Travel distance Z-axis: 600 mm Rapid traverse X/Y-axis: 36 m/min Rapid traverse Z-axis: 24 m/min Feed rate XYZ-axis: 20,000 m/min Torque: 18,500 Nm Controller System:Heidenhain iTnc530 Spindle speed (max.): 8,000 rpm Rodpey A Rd Ssfx Amnew Table size: 1,120 x 600 mm Table load: 800 kg Overall weight: 6,500 kg Coolant supply: 30 bar Distance table center to spindle nose: 680 mm various tool tapers: SK 40 Number of in tool magazine: 24 pcs Additionally, the machine is equipped with: - Spindle change-over gearbox - Flat guideways - Centralized oil lubrication - Control cabinet cooler - Spindle oil cooler - Grundfos IKZ pump - Oil skimmer - Hand wheel - Renishaw 3D measuring probe - Signal lamp - Tool cabinet - Various tool holders

Condition: used, Year of construction: 2012, x-travel 2100 mm y-travel 1020 mm z-travel 762 mm Control Fanuc MXP-200FP spindle speed 6000 U/min spindle capacity ca. 22 kW max. torque on the spindle ca. 550 Nm tool taper SK 50 table surface area 2300 x 1020 mm max. table load 3000 kg T-slots 6 x 22 mm T-slot - distance 150 mm Rjdox Sr A Uepfx Amnsw 3-Axis CNC Machining Center Equipment/Accessories: - Automatic tool changer with chain magazine, 40 stations - max. tool-Ø: 120/240 mm - max. tool length: 350 mm - coolant system with internal coolant supply and filter - emulsion mist extraction - electronic handwheel - 2 pcs. magnetic clamping plates 800 x 400 mm - various tool tapers SK50 - chip conveyor

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 15 h, YCM UV650 Spindle: SK40 / 15.000 rpm, 17kW toolchanger places: 60 control: Heidenhain TNC640 travel: X:620mm Y:520mm Z:460mm B:-50 / +110 C:360 spindle cooling system Blum laser for tool length measurement 3D probe el. hand wheel Emulsion cooling ICS 20bar outer cooling cooling gun chip conveyor Redpfeuxbcisx Amnew machine dimensions: L:4250mm W:2310mm H:2.560mm weight: appr. 12.500kg

Condition: new, operating hours: 15 h, YCM NXV1020A, spindle: SK40/12,000 rpm, control: Siemens 828D, tool changer: 30-fold, X:1020mm Y:520mm Z:540mm, coolant system: IKZ20bar, chip conveyor Rsdpforutazsx Amnew

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 1,020 mm, travel distance Z-axis: 762 mm, controller model: Fanuc MXP-200FP, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel Axes X-axis travel: 2,100 mm Y-axis travel: 1,020 mm Z-axis travel: 762 mm Spindle Spindle speed: 6,000 rpm Spindle power: approx. 22 kW Spindle torque: approx. 550 Nm Spindle taper: SK 50 Max. tool diameter: 120/240 mm Max. tool length: 350 mm Table Table clamping surface: 2,300 x 1,020 mm Table load capacity: max. 3,000 kg Number of T-slots: 6 x 22 mm T-slot spacing: 150 mm MACHINE DETAILS Control: Fanuc MXP-200FP EQUIPMENT Tool changer with chain magazine, 40 stations Coolant unit with through-spindle coolant pump and filter Emulsion mist extraction Electronic handwheel 2 pcs. magnetic clamping plates 800 x 400 mm Various SK50 tool holders Chip conveyor Redpfx Aew Nv I Iemnow Note: Oversized load transportation is required for this machine.

Condition: not inspected (used), Fanuc OM Control XYZ 600x400x460 Speed 45-6000 Taper ISO 40 Rsdpov Sunnjfx Amnjw Tool station 16 Table 920x320