Used Zftk 250 for sale (9,838)

Condition: excellent (used), Year of construction: 2008, CNC Lathe with c-axis MAZAK - QUICKTURN NEXUS 250-IIM Hodpfx Amoyz Stlo Djnl MACH-ID 9490 Make: MAZAK Type: QUICKTURN NEXUS 250-IIM Control: Mazatrol Matrix Nexus Year: 2008 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2004, turning length: 1,000 mm, Manufacturer: MAZAK Type: QTN 250 Control: MAZATROL 640T NEXUS Year of Manufacture: 2004 Specifications Metric US Standard Max. Turning Diameter 675 mm X-Axis 230 mm Z-Axis 1025 mm Hsdpfxewaiinj Am Djnl Spindle Bore 77 mm Speed 4000 rpm Spindle Power 26 kW Tool Changer 12-Hole Quill Mount 5 Mk Dimensions (Estimate) Length 3800 mm Width 1800 mm Height 2000 mm Weight 5200 kg Please note: The information on this page has been obtained to the best of our knowledge and belief, and where possible, from the manufacturer. The information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: used, Vibratory bowl feeder / Sorting device / Bowl feeder / Vibratory feeder RNA Vibratory bowl, sorting device / Screw feeding system with vibratory feeder for screw technology Hnodpoy N Dvbofx Am Dsl Feeding system, feeder device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6,000 rpm Power supply: 230 Volt, 50 Hz - The feeder was used for feeding automotive blade fuses Installation space required Ø x H: 420 x 390 mm Weight: 52 kg Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which causes the sorting bowl to vibrate by mechanical oscillations, setting the parts in motion.

Condition: new, plate thickness 2,5 mm roll-body distance 260 mm throat 500 mm distance between roll centers 92 mm tool adaptor 35 mm speed 3,5 m/min total power requirement 1,5 kW weight of the machine ca. 295 kg dimensions of the machine ca. 1200x700x1200 mm Domestic equipments: - motor driven beading machine Hnsdpoyvvq Rsfx Am Del - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity

Condition: ready for operation (used), Heidenhain ROD 250 6000 . 213 116 54 S.Nr. 3 968 067 D, cable length 1 meter, used, with minor signs of wear, 100% functional. Delivery scope as per photos. Hnsdex Er Rxspfx Am Dol

Condition: used, The Invincible Lubrication Adjustment stops Orientable head Hnodpfxsy Rrydo Am Del 380V

Condition: used, Cutting height ~ 80 mm Chain width 300 mm weight ~ 1.200 kg Hnjdsy N D R Sjpfx Am Dsl Compact Maka type V 250 J multirip saw for ripping and trimming wood with several saw blades. Including dismantling and loading. Fixed loading date: 15.06.2026.

Condition: excellent (used), Year of construction: 2006, Heller MCH 250 4 axes Year of manufacture: 2006 Control: Siemens 840 D Hnedey Nyckjpfx Am Del Spindle speed: 12,500 rpm Travel distances: X: 800 mm Y: 800 mm Z: 800 mm Pallet size: 630 x 630 mm Max. tool length: 600 mm

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 161 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 580 mm, number of axes: 7, This 7-axis Nakamura Tome WY-250 was manufactured in 2007. It features a twin spindle configuration with Y-axis capabilities on both turrets, allowing for versatile machining. The machine includes a maximum Z-axis travel of 580 mm and Y-axis travel of mm. If you are looking to get high-quality turning capabilities, consider the Nakamura Tome WY-250 horizontal turning machine we have for sale. Contact us for further details. • Travels: • X1: 160.5 mm • X2: 165 mm • Z1/Z2: 580 mm • Y1: mm • Y2: / mm • Included tooling: • 4x external tool holders • 4x tool holders for simultaneous mounting of 2 opposite tools • 6x boring bar holders • Driven toolholders (HEIMATEC): • 4x radial • 4x axial • Collet holders (Bellegrandi): • Main spindle: MSCNT70-A6” for BA & BD collets size 70, complete with related cups • Counter spindle: MSCTNR70-A5” for BA collets size 70, complete with spring ejector Additional equipment Hsdpfsy N Spcsx Am Donl • IEMCA Master 880/33/P bar feeder (2003), S/N: 0200347S03 • Application: Automatic bar feeder for CNC lathes • Capacity: • Max bar length: 3300 mm (to be confirmed) • Max bar diameter: up to Ø80 mm (model family reference) • Guide channels: Ø65 mm included; Ø70 mm currently installed and can be supplied with the machine • Features: Automatic loading/feeding, synchronization with lathe cycle, compatible with spindle liner/guide channel systems, heavy-duty frame • Condition: Currently stopped/not in production; reported functional; available for inspection by appointment • Note: Sold together with the Nakamura Tome WY-250; some accessories/guide channels may belong to the lathe setup • Complete set of hand jaws (“Manine”) for parts unloader (parts unloader itself not specified) Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: M234205, Technical Specifications: Work Area - Maximum turning diameter: 250 mm - Maximum machining diameter: 250 mm - Maximum workpiece length: 555 mm - X1/X2-axis travel: 195 mm / X-axis rapid traverse: 30 m/min - Z1/Z2-axis travel: 600 mm / Z-axis rapid traverse: 30 m/min - Y-axis (Upper Turret) travel: ±41 mm / Y-axis rapid traverse: 30 m/min - B-axis travel (Right Spindle Travel): 620 mm / B-axis rapid traverse: 30 m/min Main Spindle - Spindle interface to DIN 55026: Size 6 - Max. speed: Left 4500 rpm / Right 5000 rpm - Power at 100% duty cycle: Left - 15 kW / Right - 7.5 kW - Bar capacity: Left spindle - 65 mm / Right spindle - 51 mm Hnedexxvw Hjpfx Am Del Tool Carrier with Driven Tools - Tool interface: BMT55 - Number of stations: 12-station disc turret, all stations driven - Max. speed: 6000 rpm; Milling motor power: 3.7 kW Electrical Equipment - Operating voltage: 200V 3-phase, fuse 217A GL - Connected load: 75 kVA Dimensions - Machine dimensions (L×W×H): 4,059 × 2,314 × 2,225 mm - Weight: 6,000 kg Key Features and Capabilities: - Horizontal design: Optimized chip removal and easy loading/unloading - CNC control: Fanuc 18i-T - Chip conveyor - Bar feeder interface - Documentation: Electronic not available / Paper manual available Machine condition: NOT OPERATIONAL - B-axis not functional - Lower turret not functional

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: M232102, Technical characteristics: Work Area # Maximum turning diameter: 250 mm # Maximum machining diameter: 250 mm # Maximum workpiece length: 555 mm # X1/X2-axis travel: 195 mm / Rapid traverse X: 30 m/min # Z1/Z2-axis travel: 600 mm / Rapid traverse Z: 30 m/min # Y-axis (Upper Turret) travel: +/-41 mm / Rapid traverse: 30 m/min # B-axis travel (Right Spindle Travel): 620 mm / Rapid traverse: 30 m/min Main Spindle # Spindle according to DIN 55026: Size 6 # Maximum speed: Left 4500 rpm / Right 5000 rpm # Continuous power (100% duty cycle): Left 15 kW / Right 7.5 kW # Bar capacity: Left spindle - 65 mm / Right spindle - 51 mm Tool Holder with Driven Tools # Tool interface: BMT55 Hnjdjxxvv Ajpfx Am Dol # Number of positions: 12-station disc turret, all driven positions # Maximum speed: 6000 rpm, Milling motor power: 3.7 kW Electrical Equipment # Operating voltage: 200V, 3-phase, fuse 217A GL # Connected load: 75 KVA Dimensions # Machine dimensions (L×W×H): 4,059 × 2,314 × 2,225 mm # Weight: 6,000 kg Main Features and Capabilities: # Horizontal design: Optimal chip evacuation and easy loading/unloading # CNC control: Fanuc 18i-T # Chip conveyor # Bar feeder interface # Documentation: Electronic not available / Book available Machine Status: NOT WORKING # Fault not specified. Complete electrical rewiring performed in 2018 and linear guides renewed.

Condition: used, Year of construction: 2000, cutting diameter 250 mm dimensions of saw-blade 450 x 45 x 2,0 mm cutting width 280 x 200 mm capacity 45 degrees: round 180 mm capacity 45 degrees: square 170 x 200 mm cutting speed 16- 32 m/min power requirement 1,3 kW dimensions 1,3 x 0,55 x 1,0 m weight 180 kg Used hook saw in good condition - less used, only for our own light use. Hodpfx Amsy Nnv So Denl - 1x extra saw blade - manual lenght stopper - angel cut - coolant system - automatic stop - hyd. movement of saw blade

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 170 mm, spindle bore: 75 mm, turning diameter over bed slide: 280 mm, center width: 1,600 mm, spindle speed (max.): 1,320 rpm, TECHNICAL DETAILS Swing diameter over bed: 280 mm Swing diameter over cross slide: 170 mm Centre height: 220 mm Centre distance: 1600 mm Spindle speed range: 25 - 1320 rpm Spindle bore: 75 mm Hnodpey Iwm Refx Am Djl Tailstock quill taper: MT 4 MACHINE DETAILS Machine weight: approx. 2025 kg EQUIPMENT Heidenhain digital readout Multifix tool holder Coolant system Machine lamp

Condition: ready for operation (used), GMN TSE 80 x 250 - 6007 spindle SN: R307943 with Siemens 1LA5073-4AB95-Z motor SN: EJ797957201009, used, in good maintained condition, 100% functional, scope of delivery as per photos. Hnodpfxjy Npdwo Am Djl

Condition: ready for operation (used), GMN TSE 80 x 250 - 6007 spindle SN: R307942 with Siemens 1LA5073-4AB95-Z motor SN: EJ797957201007, used, in good condition, 100% functional, scope of delivery as per photos. Hsdpoy Npdqsfx Am Dsnl

Condition: new, Brinkmann STC 250 / 720 MVXZ + 459 submersible pump 250 L / min No. 001, serial number as per photo, unused, 100% functional, scope of delivery as per photo ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hedpsi D Hkbsfx Am Denl

Condition: ready for operation (used), Heidenhain ROD 250 18000 . 21311601 Serial number: 3654376C / L3, fully refurbished with 6 months warranty, 100% functional, delivery as per photos. Hedpfsy Nqn Dex Am Djnl

Condition: ready for operation (used), Heidenhain TE 400 control panel ID: 250 517 SN: 4648841, used, in good condition, 100% functional, delivery as shown in the photos. Hjdjy Nqtyjpfx Am Donl

Condition: new, Bühler FC-T G 1/2-75-DC-01/250 fluid control terminal with integrated level and temperature monitoring, unused, 100% functional, scope of delivery as per photos Hnsdpfji D Ulysx Am Dol

Condition: used, Year of construction: 2009, Extraction diameter: 250 mm Rated volumetric flow: 3534 m³/h Filter area: 22.6 m² Motor: 5.5 kW Briquetting: throughput approx.: 30 kg/h Briquette diameter: 65 mm Motor: 3.0 kW Storage location: Nattheim Hjdpfx Asyym A Sjm Denl

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, power: 132 kW (179.47 HP), Drum chipper Rudnik & Enners. Model TH 250-300/650/5. Drive motor 132kW. Infeed height 300mm. Lower feed rollers: 3 pcs. Upper feed rollers: 2 pcs. Incl. approx. 15m vibrating chute. Metal detector. Machine has been out of service since 2014 and has been completely overhauled. Immediately ready for operation. Control unit available. Hedsy R Nblspfx Am Djnl

Condition: used, Year of construction: 2003, machine/vehicle number: 3945, functionality: fully functional, Retort Type Mesh Belt Furnace Typ: BLH with protective gas atmosphere Heat treatment line with protective atmosphere KOHNLE BLH-950-250/50-1800 Year of production: 2003 Serial number 3945 Hardening in a protective atmosphere, cooling in oil, washing and degreasing and tempering It consists of - Vibrator for charging - 300 kg capacity - Magnetic conveyor for filling the furnace - Tempering furnace - max working temperature 950 C 3 temperature control zones strip width 250 mm Capacity 30-50 kg/h Tunnel length 1800 mm Protective atmosphere Propane (possible change of gas for a protective atmosphere) - Oil quench with cooling oil, temperature 70C - Magnetic conveyor for extracting goods - Stand for washing and degreasing Hnedjyn Rgvspfx Am Del - vibrator for charging Annealing furnace - max temperature 500 C Control cabinet SIEMENS ALL ORIGINAL TECHNICAL DOCUMENTATION FROM THE MACHINE Installation dimensions 17 m x 2 m x 2.5 m Dismantling and loading costs are charged additionally The price of the mentioned line is not fixed for serious enquiries

Condition: good (used), Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping plate with T-slot, clamping table, T-slot table, milling machine table, tilting table -Clamping table: Milling machine table, tilting table, T-slot table -Table surface: 250 x 250 mm, swivels on both sides -T slots: Slot width: 14 / 25 mm, Slot depth: 24 mm -Dimensions: see photos -Transport dimensions: 300/250/H155 mm -Weight: 26.4 kg Hodpfxoy Iwkcs Am Dsnl

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 310 mm, spindle bore: 80 mm, turning diameter over bed slide: 500 mm, center height: 250 mm, center width: 1,000 mm, quill diameter: 75 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 9 rpm, quill mount: MK 5, Equipment: rotational speed infinitely variable, incl. RÖHM lathe chuck incl. 3-axis position display incl. quick-change tool holder 'Set', Multifix system Hedpoy Izausfx Am Denl for further information, see data sheet ELMAG warranty: 3 years (with online registration after purchase) NOT THE RIGHT MACHINE? We are official ELMAG partners and can offer you the entire range of ELMAG products! Request a quote!

Condition: as good as new (ex-display), Clean Air Filter Type: Power Unit 250 P FU Offer type: Demonstration machine Technical data: Motor power: 7.5 kW / 3-phase / 400 V / 50 Hz Hnsdpfx Amehfmpxs Dol Inlet diameter: 250 mm Rated air flow: 3,534 m3/h Max. air flow: 4,900 m3/h Negative pressure at rated flow: 3,184 Pa Filter surface area: 22.4 m2 Compressed air cleaning including integrated pre-separator including integrated automatic extinguishing system including inverter for speed control including integrated acoustic enclosure (-4 dB(A)) Chip collection volume: 2 x 250 L Sound pressure level: 71 dB(A) incl. dust lock Dimensions (L x W x H): 3,000 x 1,058 x 2,361 mm Weight: 850 kg