Used Zwick for sale (32)

Condition: excellent (used), Zwick / Roell Type: Mflow Area of application With increasing test volumes, the need for a higher degree of automation also increases (compared to the Cflow). The Mflow is a modularly expandable device, with which you can determine the melt mass and melt volume flow rate. The basic version of the Mflow extrusion plastometer is designed for MFR tests according to method A and can be upgraded for MVR tests according to method B. Tests according to the following standards are possible: - Methods A and B according to ISO 1133 - Methods A, B and C according to ASTM D 1238 - ASTM D 3364 - JIS K 7210 As an option, you can equip the Mflow with the pneumatic weight lift with and without cleaning function, for example. without cleaning function or weight staking. The Mflow can be operated both stand-alone via a modern touch display, as well as with the ZwickRoell testing software on a PC. Technical data Test load: 0.325 - 21.6 kg Compressed air, lubricated, dry: 6 - 10 bar Dimensions Height: 510 mm Width: 360 mm Depth: 419 mm Weight: approx. approx.: 43 kg Test temperature: +50°C - +450°C Display: Capacitive touch display Resolution of the temperature display: < 0.1 K Number of storable parameter sets: >100 Temperature accuracy in the range 0 - 75 mm above the nozzle in the temperature range 50°C - 450°C: < 0,3 K Time measurement Error limit (method A): ± 0.02 (with automatic cut-off device) Error limit (method B): ± 0.01 Displacement measurement Error limit (method B): ±0.02 mm (ISO 1133) / ±0.4 % of 6.25 mm (ASTM D 1238) Resolution: < 0.005 Multi-device operation on one PC: Itodpfstq Em Tex Aanjr Available working memory, min.: 1.54 GB Clock frequency: 3 GHz Connectable Mflow extrusion plastometers per PC: 6 Mains connection: 220 - 240 V, 1L/PE/N Power consumption: 2.6 A Mains frequency: 50/60 Hz SW version: V4.2 Year of manufacture: 2021 Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: excellent (used), Year of construction: 2010, Material Testing Machine: ZwickRoell GmbH mod.Z005 TN Designed to perform standard tests on materials and components, allowing for precise measurements of strength, flexibility, and other material properties, which are crucial in engineering and material research. With advanced technology and intuitive software, these machines offer efficient and safe operation. The device includes accessories for measuring material tensile strength, compression, and bending. Technical Specifications: • Year of production: 2010 • Maximum load (Fmax): 5 kN • Test dimensions: - Height (without accessories): 1070 mm - Stroke height: 1000 mm • Frame dimensions: - Height: 1340 ... 1345 mm - Width: 770 mm Itsdpfx Aajuna Iusner - Depth: 439 mm • Weight: approximately 110 kg • Power supply: 230 V, 1Ph/N/PE, power consumption about 800VA The machine allows for the testing of various materials and components, including: • Construction materials: concrete, steel, wood • Plastics: flexibility, tensile strength • Metals: strength, hardness, and fatigue testing • Mechanical components: compression, bending, and tensile tests • Samples in various forms: thin-layered, block-shaped, tubular Thanks to the system's flexibility, tests can be adapted to specific requirements. TAG: Laboratory Equipment, Material Testing, EPS Styrofoam, Polystyrene Production, Mechanical Testing, Thermal Conductivity, Material Properties, Construction Materials, Quality Control, Engineering Research

Year of construction: 2013, condition: good (used), Scissors lifting table with driven roller conveyor - second-hand - Itsdofwr Uqepfx Aansr Price (net) ex location: only 1.500.-€, dismantled and loaded! Manufacturer: Schwinghandl Year of construction: 2013 Type: roller conveyor / scissor lift Length of roller conveyor: unknown Width element approx. 75cm roll length: approx. 68cm roll width: approx. 5cm Element height: approx. 15cm lifting height: currently approx. 78,5cm Motor: SEW condition: good Available: immediately Location: Zwickau, later warehouse Frankenberg (Saxony)

Condition: used, mileage: 1,001 km, power: 59 kW (80.22 HP), first registration: 01/1955, fuel type: diesel, empty load weight: 3,580 kg, maximum load weight: 3,500 kg, overall weight: 7,080 kg, tire size: 8.25-20, axle configuration: 4x2, wheelbase: 3,250 mm, color: green, driver cabin: day cab, gearing type: mechanical, suspension: steel, loading space length: 3,400 mm, loading space width: 2,150 mm, loading space height: 550 mm, Year of construction: 1955, Equipment: cabin, trailer coupling, Vehicle location: Bovenden, Kz. Haus, switch 5, leaf suspension, AHK air-light-hydr. Wheelbase: 3250 mm Body: Truck vintage - 3-sided tipper swirl chamber diesel engine type EM4-20, 4-cylinder ( in-line ), 6024cm³, water-cooled, unsynchronized 5-speed gearbox, top speed: 60km/h, The successor model of the H3 was the H3A truck. It was presented to the public at the Leipzig Spring Fair in 1949 and built from mid-1950 to 1956 at the VEB Kraftfahrzeugwerk HORCH in Zwickau, initially as a platform truck. The H3A was a completely new development in its design as a long-hood truck with a diesel engine. The development of the diesel engine goes back to a VOMAG development for the Leipzig Spring Fair, the H3A appeared as a tractor unit with tank semi-trailer, other variants such as three-way tipper, livestock transporter, road tractor, tanker and with special bodies for the post office and DRK, as well as a furniture box. Around 180 H3B front-wheel-drive buses were produced at the LOWA plant in Bautzen on the basis of the H3A chassis. The main area of use was mainly in the civilian sector, but the H3A was also used by the Volkspolizei, or the barracked Volkspolizei, later NVA, Ex Dörr Spedition, errors excepted! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Itodovhg R Tepfx Aaner - .

Condition: new, Year of construction: 2025, Roller width 350 mm roll diameter 110 mm Roller covering - soft rubber 70 Grad shore rubber NBR - Qualität Pressure line 28 N / mm air pressure max. 4 bar Capacity of dye tub Becken - 1,3 Liter Capacity of dye tub Zwickel - 0,3 Liter Speed driven roll 0-25 U/min speed 1 - 10 m/min voltage 230 V / 50 Hz drive motor 0,4 kW weight 130 kg Itedpfxsu Dn Uve Aanor dimensions 1050 x 800 x 810 mm • 2-Roll-laboratory padder for horizontal and vertical roller-arrangement. • The changing from horizontal to vertical roller arrangement can be effected by easy re-allocation of the upper squeezing roll with the pressure cylinders, • small trough for vertical roller-arrangement, • content: 1.3 litres, • with controllable motor drive, • direct drive to the fixed roll, • by means of wheels the pressure roll is driven when the nip is open.

Condition: good (used), Powered roller conveyor which can be turned at right angles (90 degrees) by motor drive - second-hand - Price (net) ex location: only 1.500.-€, dismantled and loaded! Manufacturer: should be Siemens Dematic Isdpfxofwr Tzo Aanotr Year of manufacture: Type: Length of the roller conveyor: approx. 1,645m Width element approx. 75cm roll length: approx. 60cm roll width: approx. 5cm Distance between the rollers approx.: approx. 5cm height: approx. 55cm Motor: SEW Length of frame: one side approx. 2m, other side unknown (but can be changed anyway due to the aluminium profiles condition: good Available: immediately Location: Zwickau, later warehouse Frankenberg (Saxony)

Condition: used, mileage: 1,000 km, power: 59 kW (80.22 HP), first registration: 01/1955, fuel type: diesel, empty load weight: 3,580 kg, maximum load weight: 3,500 kg, overall weight: 7,080 kg, tire size: 8.25-20, axle configuration: 4x2, wheelbase: 3,250 mm, color: green, driver cabin: day cab, gearing type: mechanical, suspension: steel, number of seats: 2, loading space length: 3,400 mm, loading space width: 2,150 mm, loading space height: 550 mm, Year of construction: 1955, Equipment: cabin, trailer coupling, Vehicle location: Bovenden, Kz. house, switch 5, leaf suspension, AHK air-light-hydr. Wheelbase: 3250 mm Body: Truck vintage - 3-sided tipper body, swirl chamber diesel engine type EM4-20, 4-cylinder ( in-line ), 6024cm³, water-cooled, unsynchronized 5-speed gearbox, top speed: 60km/h, The successor model of the H3 was the H3A truck. It was presented to the public at the Leipzig Spring Fair in 1949 and built from mid-1950 to 1956 at the VEB Kraftfahrzeugwerk HORCH in Zwickau, initially as a platform truck. The H3A was a completely new development in its design as a long-hood truck with a diesel engine. The development of the diesel engine goes back to a VOMAG development for the Leipzig Spring Fair, the H3A appeared as a tractor unit with tank semi-trailer, other variants such as three-way tipper, livestock transporter, road tractor, tanker and with special bodies for the post office and DRK, as well as a furniture van. Around 180 H3B front-wheel-drive buses were produced at the LOWA plant in Bautzen on the basis of the H3A chassis. The main area of use was mainly in the civilian sector, but the H3A was also used by the Volkspolizei, or the barracked Volkspolizei, later NVA, Ex Dörr Spedition, errors excepted! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Isdpsvhg Hnofx Aanetr - .