Membrane press

OMC - ITALY PL/CONVERSION-S

Condition: excellent (used), MEMBRANE PRESS For overlaying MDF shaped workpieces with PVC, PP and PET With VARIOPIN system Double Automatic front loading/unloading and preparation table (1500 x 2800 mm tray) Max pressure 2,400 KN Working pressure 320 BAR Dimensions of the Platens tables mm 1500 x 2800 Useful working dimensions mm 1250 (or 2 x 600) x 2550 Front loading side from mm 1500 (useful width mm 1250) Separate electrical cabinet and controls ( Electronic Programmer SIEMENS SIMATIC Panel Touch Total Installed power KW 50 ca. Cjdpfjrwxz Rex Addjrk OPTION: "Paternoster" reels Store (magazine) Unwinder (reels holder) with coating sheet cutting system

Condition: new, Year of construction: 2023, Working width: 600 mm Working height: 280 mm Minimum workpiece length: 250 mm Crodpfx Ademftk Asdjk Units: 2 brush units centrally adjustable and each with individual fine adjustment Diagonal brush technology: Yes, infinitely adjustable from -7° to + 7° 1st brush: Metal brush diameter 220mm 2nd brush: Tynex brush, grit 80, diameter 220mm Height adjustment: electric Height indicator: mechanical counter Feed speed: 4 - 12 m/min Motor power brushes: 2 x 4 kW Motor power feed: 0.37 kW Machine length: 1.5m Machine width: 1.5m Weight: 700kg

Condition: excellent (used), Year of construction: 2016, operating hours: 1,395 h, functionality: fully functional, machine/vehicle number: 1400040877,  4-axis (X, Y, Z, A) center,  For economical and efficient machining of aluminum profiles and thin-walled steel profiles,  Version with air-cooled milling spindle,  All machining processes such as milling, drilling and threading take place on a stationary profile,  Smooth machining using all tools,  Simultaneous tool magazine ensures short tool change times and, as a result, optimal machining cycles,  Magazine can be equipped with eight tools,  Windows operating system  Machine equipped with eluCam program  Max. length of machining fields with front machining: 4200 mm Crjdpfx Adeuc U S Nsdjk  Max. length of machining fields without front machining: 4320 mm  Automatic length measurement on both sides,  Barcode reader,  Stationary tool magazine (8 slots),

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine is completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and incremental dimensions Digital readout for horizontal cuts PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Crodpfjw Nac Aox Addsk Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Availability: by arrangement Location: Flörsheim

Condition: used, machine/vehicle number: 008018, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Cjdpfowv Dfcsx Addsrk Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2016, Sliding table 2800 mm, cutting width 1250 mm, controlled parallel fence, kappa 400 X, tilting saw unit 45°, saw blade diameter: 250 - 400 mm, max. cutting height: 133 mm, electric height adjustment, motor 5.5 kW, 3 speeds: 3500/4500/7500 rpm. X Motion screen control (touch function) at eye level, additional scoring function, easy-lock quick-change system for main saw blade. Location: Supplier Csdpfoxta Dmjx Addork

Condition: new, New electric scrubber dryer, floor cleaning machine KREMER type KR-FL50A Year of manufacture 2024 Theoretical area performance 2000 mª/ h Working width 510 mm Cleaning brush Ø 510 mm Brush speed 175 rpm. Suction lip width 850 mm Tank volume clean water: 50 liters Tank volume dirty water: 50 liters Noise level 66 dBa Climbing performance 2% Battery voltage 24 volts, 100 AH - Battery charger 24 volts Credpjvvww Tefx Addjk - Battery 24 volts, 100 AH - One cleaning brush - Two separate tanks - No drive, the device is pushed by hand Machine length: 1200 mm Machine width: 510 mm Suction lip width: 850 mm Machine height: 1350 mm Empty weight 160 kg Good condition

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Crodpfjvvkfdjx Addsk

Condition: used, Working width 1350 mm Number of sanding units 2 st. Cedormucxepfx Adderk Workpiece thickness max. 160 mm sanding belt measurements 1370 x 2150 mm Feed motor 0,75 PS

Condition: used, machine/vehicle number: 007346, Max working length: 3500 mm Cjdev Akwgspfx Adderk Max working width: 1300 mm Heating System: electric Pressure Exerted: 2.35 Kg/cm2 No of Pressing cylinders: 8