Feeder

PODAJNIK DO PIŁY/ STRUGARKI/ OPTYM

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Ledpfx Aeuz If Non Ioad Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, Roll sets for profile bending machine, 3-roller ring bending machine HERKULES WETZLAR The rollers are suitable for a HERKULES WETZLAR profile bending machine, type BO 238 N. Shaft diameter: 60 mm with an 18 mm keyway. 2 pieces, roller set No. 1, roller diameter 110 mm, roller width = 180 mm. 2 pieces, roller set No. 2, roller diameter 160 mm, roller width = 40 mm. 3 pieces, roller set No. 3, roller diameter 150 mm, for pipe diameter Ø 33 mm, roller width 87 / 115 mm. Lajdpfx Anoglaq Ij Iod - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm, without keyway. The machine had 2 driven rollers. Total weight of all rollers: 57 kg. Good condition.

Condition: new, Year of construction: 2024, load capacity: 300 kg, Welding rotary table KT 300 Ljdpfec Ug Tlex An Ijad Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilting range: continuously adjustable via crank gear motor, 0 - 90° Speed: 0.3 to 2.5 RPM Includes foot pedal remote control Optional extra: Quick-release chuck Diameter: 300 mm, €450

Condition: used, Year of construction: 1988, Technical details: pressure: 10 t workpiece diameter - max.: 40 mm threading length: 70-80 mm workpiece diameter min/max: 3 / 40 mm revolution per minute: 47-94 U/min feed speed: 0,5 - 6 mm/s work stroke: max. 7 mm total power requirement: 4,68 kW Weight approx.: 1,4 t dimensions of machine: 1,4 x 1,4 x 1,7 B T H m dimensions of hydaulic: 0,8 x 1,2 m Hydraulic drive manual and automatic cycle adjustable roller speed max. thread diameter 40mm min. thread diameter 3mm up to 3.5 mm pitch max. pitch 1.75mm roller width min. 80 mm max. 120mm shaft speed 47-94 roller shaft diameter 40 various rollers as accessories Lasdpsw D Aq Tsfx An Iod *

Condition: excellent (used), Year of construction: 2018, Number of motors 1 Stück 0 2500 mm Control nein Hecht ES 350 single-sided glazing bead saw ----- Pneumatic pivoting against fixed stops. 45º/ 90º/ 135º with pneumatic sawblade feed pneumatic tilting via manual tilt stop with machine base, pneumatic clamping HM sawblade 350 x 3.0/2.2/30 Z 100 Saw stand dimensions: length 700 mm, depth 1,600 mm, height 1,500 mm 1.5 m touch stop 1.5 m support with support 3 m touch stop Support extension from 1.5 m to 3 m with support Lsdpfx Anjvpr N Rs Ioad Table inserts grooved for rebated glazing beads HECHT ASB manual length stop with digital display, 2,500 mm With dust extraction unit (Technical specifications according to the manufacturer - no guarantee!)

Year of construction: 1980, condition: good (used), machine/vehicle number: 3253-80, Offer 22045 Approximate technical data: - Pressing force 10 t Lasdpfx Anjktg Dhj Ijd - Overhang 150 mm - Table size 520 x 320 mm - Adjustable table height 160 mm - Through-hole in the table 165 x 125 mm - Overall installation height 220 mm - Ram area 240 x 150 mm - Dowel hole in the ram 30 mm - Ram adjustability 40 mm - Stroke adjustment 4 - 60 mm - Stroke rate 130 1/min - Hydraulically actuated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive 380 V / 1.1 kW - Space requirement approx. W 1000 x H 1800 x D 1100 mm - Weight approx. 1300 kg

Year of construction: 2008, condition: excellent (used), Max. bar diameter 65 mm Max. bar length 3000 mm Ledoin Hkmspfx An Ioad

Condition: new, saw blade diameter 350 x 32 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 x 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 / 110 mm capacity 45 degrees: square 100x100 / 95x95 mm capacity 45 degrees: flat 135 x 60 mm turning speeds 1700 / 3400 U/min Control MEP NC total power requirement 1.5 / 2.2 kW weight of the machine ca. 290 kg range L-W-H 1240 x 1360 x 1800 mm Features: - Semi-automatic high-performance circular saw * For cuts from 45° right to 45° left * In aluminum and light metal alloys - MEP microprocessor control * Simple user interface with display and mechanical buttons * Start and end positions of the saw head can be saved - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° * Enable quick positioning of the saw head - Pneumatic vise with quick-release clamp * Pneumatic clamping system allows adjustment of the clamping pressure * Depending on the hardness of the material to be cut * A pneumatic vertical vise is available as an option - Heavy-duty cast iron construction ensures . vibration-free operation and maximum precision - The saw head can also be tilted up to 45° Lajdpfx Ajxaa Hnon Ied - 2 sawing speeds - Base frame with lockable door - Pneumatic cooling and lubrication - Machine base frame Included in delivery: - Adjustable length stop 600 mm - Tool kit - Mounting adapter for feed roller conveyor including 1 support roller - Tool kit - Detailed operating instructions, maintenance manual, etc. - Machine is delivered without a saw blade!

Condition: used, Year of construction: 1978, machine/vehicle number: 4788, Capacity: 35 ton Throat depth: 225 mm Ram stroke: 8 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 325 mm Table surface area : 600 x 450 mm Slide area: 300 x 225 mm Number of strokes: 160 s.p.m. Required power: 2,2 kW Laodpfx Anow Tukij Ied Dimensions L x W x H: 1000 x 1600 x 2200 mm Weight of machine approx.: 1,9 ton

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 480 mm, total length: 6,000 mm, construction width: 405 mm, construction height: 700 mm, axle spacing: 100 mm, EasySystem driven roller track, in mint condition, several pieces for sale 480x6000 Driven roller track with aluminum frame, in mint condition, several pieces for sale from stock. The track system can be classified. Manufacturer: EasySystem Total track width: 480mm Roller width: 405mm Roller diameter: 50mm Wheelbase: 100mm Total length of track: 6000mm Track height: 700mm (adjustable legs - max. 8cm +/-) Drive: electric motor with NORD gearbox Power: 0.37kW, 1.89A, 230/400V Track speed: approx. 30m/min Ledpfx Asukgduen Iead A NORD frequency converter can be purchased as an option, with which the speed can be adjusted steplessly.