Briquetting press

RSN Eco 5,5

Condition: used, No. 3231 Extraction unit with briquetting press Spänex SHB 50 Used Complete disposal system for waste materials made of wood, paper, plastic, cotton, etc. The sawdust enters the chip bunker of the hydraulic briquetting press directly after the filter system. After compression, the briquettes are transported directly to the heating system. Technical data according to manufacturer's brochure: Capacity 50 kg/h (depending on material) Throughput 0.45 m3/h Briquette shape 8-cornered, 125 x 70 mm Motor power 5.5 kW Compaction 1:10 Moisture min. 8%, max. 20% Sale on behalf of customer, ex location near 69124 Heidelberg, without dismantling, without transportation and assembly Dismantling, loading and transportation by us optionally possible Errors in description and price reserved Rodjwqhwlepfx Aamon To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test Rodpfsxnvq Esx Aamjn © Various control components • Price on request

Condition: used, Year of construction: 2019, Used machine Rodpfx Ajw Rhk Dsamsn Identical in construction to Weima C 150 Year of manufacture: 2019 1845 operating hours Equipment and technical data: Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil capacity: 160 l Throughput capacity: up to 50 kg/h (depending on material) Connection rating: 400 V +/- 5% / 50 Hz Includes: Press mechanism with filling cylinder, main cylinder, clamping cylinder Connection part for transport line Chromed clamp Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Control cabinet and electrical control system Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with level limit switch Material: shavings, sawdust from solid wood, loose, clean and free from contaminants* Maximum dimensions: 10 mm Throughput performance: approx. 50 m³/year/ * Contaminant specification: Everything except wood, wood pieces larger than 15 mm. The throughput capacity is highly dependent on the material. Stated values are averages. May vary depending on mix ratio, moisture content, and material characteristics! Application case not known or not fully specified. Machine is being sold appropriately and solution-oriented by a specialist dealer. With oil cooler or water cooling; ensure adequate ventilation for the press/unit/oil cooler. In case of heat build-up, operating time may be drastically reduced due to increased temperature. With new press clamp Availability: by arrangement Location: Flörsheim

Condition: ready for operation (used), Motor power: 5.5 kW Briquette diameter: 80 mm Sawdust level sensor Rodpfx Aewd R Aqjamon Operating hours: 6363 h Hopper diameter: 1200 mm Adjustable feed rate Year of manufacture: 1996 Power supply: 380 V

Condition: used, Technical specifications: Briquette diameter: 60 mm Briquette length: 50 mm Rsdpsxzqmzjfx Aamen Hopper diameter: 1100 mm Hopper height: 910 mm Hopper capacity: 0.89 m³ Throughput: 60-80 kg/h Power supply: 400 V Motor power: 7.5 kW Safety switch Overall dimensions: Length: 1670 mm Width: 1100 mm Height: 1500 mm

Condition: used, Technical data: Rodpjxxxawefx Aamsn Briquette diameter: 70 mm Briquette length: 70 mm Hopper diameter: 1200 mm Hopper height: 1000 mm Hopper capacity: 1.13 m³ Throughput: 70–120 kg/h Power supply: 400 V Motor power: 11 kW Safety switch

Condition: new, New and used briquetting presses. Do you need a briquette press? Contact us. We have many years of experience in machines for briquetting materials such as wood, biomass, paper and much more. We have more than 20 years of experience. Presses for round or rectangular briquettes. Redpfxsx S Ii Ro Aamon We ship alle over EU. Capacity from 20 to 400 kg. per hour.

Year of construction: 2010, operating hours: 5 h, condition: used, functionality: fully functional, machine/vehicle number: 123456789, We are offering this used Wood's Powr-Grip MRT vacuum lifter, year of manufacture 2010. Manufacturer: Wood's Powr-Grip Model: MRT Year of manufacture: 2010 Condition: used Category ID: 681 Type: Woods Powr Grip vacuum lifter Rsdpfxsycwnio Aamen Original price: €7,800 If you have any questions or need more information, feel free to send us a message or give us a call.