Laser cutting machine

Trumpf Trulaser 3020

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system 3 identical paternosters are available External dimensions: Height 6500 mm Width 3670 mm Pgedpfsrw A Eiex Ab Isw Depth 1560 mm 46 supports with a payload of 305 kg each In the clear usable dimensions: H = 210 mm W = 3050 mm D = 520 mm Chain pitch 254 mm Additionally available: 46 intermediate shelves for halving the usable height Total payload up to 14200 kg Storage table at 1000 mm above floor level with stainless steel worktop Color: GRAY / DARK GRAY, surface cleaned, signs of wear possible Drive motor power: 1 x 5.5 kW / 400 volts Subject to errors and technical changes. Details may vary from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: good (used), Year of construction: 2008, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, working range: 2,500 mm, Equipment: cooling unit, TRUMPF TruLaser 2525 - 4 kw (formerly Trumatic L 2530) Working area: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit - TFT color screen - Position laser diode - Motion unit for high-precision processing - Additional highly dynamic Yp axis - Drives with maintenance-free three-phase servomotors - Closed beam guidance - Conveyor for small parts and waste - NitroLine - FlyLine - Piercing end detection TRUMPF LASER: - CO2 laser TruFlow 3200 - High frequency excitation - Maintenance-friendly turbo radial blower - Gas mixer (integrated) - Laser power control - Laser logbook function CUTTING HEAD: - Laser cutting head with 5" lens - Laser cutting head with 7.5" lens - Universal quick-change device - ControlLine CONTROL: - SIEMENS Sinumerik 840D control system - Automatic switch-off - ContourLine - SprintLine - Teleservice - Microweld - RJ45 network connection - 3.5" floppy disk drive - Network connection via telediagnosis SAFETY: Pedjrwlwnspfx Ab Iegw - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Workshop programming EXTENDED EQUIPMENT: - More powerful TruFlow 4000 laser - Automatic pallet changer

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine Series -Model: L-9060. -Material Thickness: 1.0 mm – 30.0 mm -Maximum Material Width: 600 mm -Minimum Material Length: 145 mm -Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 26.000 kg. Machine Dimensions (L × W × H): 4,400 × 7,185 × 2,260 mm Model: L-9011 Material Thickness: 1.0 mm – 30.0 mm. Maximum Material Width: 1,100 mm. Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 31.000 kg Machine Dimensions (L × W × H): 4,600 × 7,185 × 2,260 mm Model: L-9013 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 1,300 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 35,000 kg Machine Dimensions (L × W × H): 5,000 × 7,185 × 2,260 mm Model: L-9016 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 1,500 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Weight: 40.000 kg Machine Dimensions (L × W × H): 5,200 × 7,185 × 2,260 mm Model: L-9020 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 2,000 mm Minimum Material Length: 145 mm Psdpfx Abohwb U To Isgw Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Dimensions (L × W × H): 5,700 × 7,185 × 2,260 mm.

Condition: excellent (used), Year of construction: 2021, Trumpf TruLaser Tube 3000 (2021) 2000W Manufacturer: Trumpf Model: TruLaser Tube 3000 Psdpfexrpb Eex Ab Isgw Condition: used, as new

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC punching machine with only approx. 11,600 operating hours, immediately available Manufacturer: TRUMPF Model: TruPunch 3000 - 1600(S11) Year of manufacture: 11/2013 Operating hours, approx.: only 11,600 h Sheet format: Large format TECHNICAL DATA: Working area: 3,000 x 1,500 mm, with repositioning Max. workpiece weight: 160 kg Punching and hold-down force: 180 kN and 20 kN Max. stroke rate: Punching: 800 1/min, Marking: 2,500 1/min Dimensions (L x W x H): 6,500 x 6,203 x 2,252 mm SPECIAL EQUIPMENT: - MultiTool function - MultiShear function - Marking / Fast embossing function - Deburring and roller technology - Adaptive stroke calibration Pgsdpfx Aoxn Tywjb Iow - Punch slug breakage monitoring - Lowerable die - Spray degreasing for dies with fill level monitoring - Additional clamp - Sheet collision detection - Stop pin, outer side, left position outside STANDARD EQUIPMENT: Machine: - Working area 3,000 x 1,500 mm (with repositioning) - Rigid C-frame for easy access - Coordinate guidance for high-precision machining - Linear magazine with 17 tool stations and 3 clamps - Drives with maintenance-free 3-phase servo motors - Repositioning device with programmable hold-down - Ball tables - Parts chute - Programmable support table - Good parts container - Scrap container - Automatic shut-off mechanism - Transport and installation device - Stop pin (right side, inside) - Foot switch for closing the clamps Punching head: - Servo-electric punching head - Rotatable single-tool adapter - Programmable hold-down - Tool length compensation - Spray degreasing for punch - Punch slug extraction - Forming - Manually adjustable pressing force - Stroke counter for punch - Monitoring of fill level for thread-cutting and tool lubrication Control: - Control system based on Bosch MTX CMP 70 - Operating panel with 17" touchscreen - NC program management - Integrated technology data - Teleservice via Internet - Integrated e-shop - Production planning - Programming - Advanced workshop programming - Data transmission - USB interface Safety: CE marking (ex works) Dual-beam light barriers

Condition: like new (used), For sale is a TRUMPF TruBend 5130, regarded worldwide as the benchmark for productivity and precision in sheet metal processing. Whether for single pieces or series production, this press brake impresses with its intelligent technology, simple operation, and maximum reliability. 🔧 Technical data (excerpt): • Press force: 130 t • Bending length: 3,230 mm • Control: CNC Touchpoint TruTops Control • Backgauge: 6-axis (optionally up to 8-axis) • Equipment: angle measuring system, bending assistant, quick tool change, safety laser system ✨ Special features: • Extremely precise bending thanks to ACB angle measurement • High energy efficiency due to on-demand drive • Ergonomic operation with intuitive touch display • Ideal for thin to thick sheet metal Pgsdpfx Ajwu Tnqob Isw

Condition: new, Year of construction: 2023, Leveler High Precision Straightening Bosporas manufactures Inline and Part Levelers. 4H, 6H and Strand Levelers. Pgodpfoh Dzg Usx Ab Isw Please let us know your material type, thickness and width parameters to be able to quote you.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, control type: CNC control, actuation type: hydraulic, controller manufacturer: Triumph, controller model: TASC 6000, bending force (max.): 230 t, stroke length: 445 mm, Machine type: Hydraulic press brake Manufacturer: Trumpf Model: TruBend 5230 Pressing force: max. 2,300 kN Bending length: 4,250 mm Stroke: max. 445.0 mm Operating pressure: max. 300 bar Overrun time: max. 95 ms Pedpfx Ajxf Um Tob Iegw Overrun distance: max. 10.0 mm Safety distance: min. 190.0 mm Machine weight: 19,200 kg Control: TASC 6000 Backgauge: 4-axis Upper tool clamping: hydraulic Lower tool clamping: hydraulic Lower tool displacement: pneumatic

Condition: excellent (used), Year of construction: 2015, Technical data: Working length: 4100 mm Frame gap: 3700 mm Pressing force: 170 tons Top drive with 4-cylinder design CNC control: TASC 6000 Number of controlled axes: X; R; Z1/Z2 Stroke: 445 mm Throat depth: 410 mm Installation height: 385 mm Working height: 1050 mm Hydraulic tool clamping, top and bottom Pedpfsxcayasx Ab Isgw Pneumatic die shifting, CNC-controlled Crowning, CNC-controlled CE mark Motor power: 37 kW Dimensions (L x W x H): approx. 5650 x 2350 x 3000 mm Weight: approx. 13.5 tons Accessories: Electronic pressure gauge Measuring system with centrally mounted glass scales and temperature compensation Control cabinet cooling BendGuard safety system Network capability Support arm with adjustable height Condition: Overall in very good condition Machine has been stored The seller does not accept liability for typographical or data transmission errors. The machine's appearance, technology and wear correspond to its age; used machines are sold without any warranty.

Condition: used, material width 250 mm material thickness 2 - 4 mm no. of straightening rolls 7 run-in height 1250 mm mm strip intake tiltable, positiv 25 ° strip intake tiltable, negativ 30 ° Pgodpfx Absgbl Aaj Isw total power requirement 3 kW weight of the machine ca. 800 kg dimensions of the machine ca. m Leveler was dismantled, checked and then repainted