Twin Pack MDEL Handle Applicator (2002)

Twin Pack Tragegriffapplikator

Condition: used, Year of construction: 2009, Overview This Twin Pack MDEL-S handle applicator, built in 2009, applies carry handles to beverage multipacks. It produced multipacks in several configurations, from 2x3 and 3x4 packs of 0.5 l bottles to 2x3 packs of 0.75 l and 1.5 l bottles, and runs on pre-spooled handle tape rolls. The machine was taken out of production in October 2026 when the line was replaced, and it is dismantled and ready for transport. Technical data - Manufacturer: Twin Pack (Italy) - Model: MDEL-S - Year of manufacture: 2009 - Machine type: handle applicator for beverage multipacks - Formats: 2x3 x 0.5 l, 3x4 x 0.5 l, 2x3 x 0.75 l, 2x3 x 1.5 l - Handle material: pre-spooled handle tape rolls - Control: Siemens SIMATIC touch panel - Suitable for: water, soft drinks and beer Equipment Chedpfx Aj Ahzarjbhjd - Handle application unit in a guarded frame with transparent doors and signal tower - Pack infeed conveyor with guide rails and perforated safety guard - Separate tape unit with reel holders and push-button station with emergency stop - Operator panel on a swivel arm with key switch and emergency stop Condition Very good condition. Dismantled after the line change in October 2026 and stored. Availability Available immediately. Location: Serbia.

Condition: excellent (used), machine/vehicle number: 9056423, WITH COLOR RIBBONS Config. No.: 096-104-00404 Equipment / Additional information: Maximum Print Area: Width: 3.4”/86mm Length (with standard memory): 39”/991mm Resolution: 300dpi/12dots/mm Maximum Print Speed: 8”/203mm per second Label and liner width: 0.79”/20mm– 3.54”/90mm Ribbon width: 0.79”/20mm– 3.4”/87mm Codpfx Abevf Ifajhohd

Condition: used, Year of construction: 2002, Overview This Twin Pack handle applicator, built in 2002, applies carry handles to PET bottle multipacks. It comes from a mineral water packaging line of the same year with an output of 20,000 - 30,000 bottles per hour depending on format. The machine is still installed and under power and can be inspected on site. Technical data - Manufacturer: Twin Pack - Year of manufacture: 2002 - Machine type: handle applicator for beverage multipacks - Line output: 20,000 - 30,000 bottles/h depending on format Cjdpjz Elmhsfx Abhjhd - Line formats: PET bottles 0.25 l, 0.33 l, 0.5 l, 0.75 l, 1.0 l and 1.5 l - Control: Siemens text operator panel Equipment - Handle application unit with tape reels on a blue steel frame above the pack conveyor - Control panel with separate start, stop and reset for the front and rear sections, emergency stop - Guarded enclosure with transparent doors Condition Still installed and under power. An inspection on site is possible. Availability Available from 31 October 2026. Location: Germany.

Condition: used, Year of construction: 2009, Overview  Chjdpsy Etdgofx Abhjd This handle applicator was manufactured in 2009 by Italy TWIN PACK. The machine is designed for handle application on PET bottle packs. Production was stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It has less than 500 operating hours and is available immediately. The reason for sale is a new project with installation of a complete new line. Technical data  - Capacity: 35 ppm - Formats: 1.5 L – 3×2 - Application: Handle application for PET bottle packs - Configuration: Not provided - Operating hours: Less than 500 hours

Year of construction: 2004, condition: ready for operation (used), Output: 24,000/h, band speed: 0.5m/s, format: 0.25l GASTRO/ 0.5l GASTRO/ 0.7l GBD/ 0.75l GBD, GASTRO, with Sorting System HEUFT SPECTRUM SX TI 36, machines were overhauled in October 2021. Chodpfx Abohix Ukjhed

Condition: used, Year of construction: 2013, Overview The Heuft InLine IR – high speed empty bottle inspector is characterized by its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/h). It can perform all standard inspections (sidewall inspection, infeed inspection, neck finish inspection, base inspection, discharge inspection, HF caustic and IR residual liquid detection). In addition, it has a separate module for foreign bottle detection (height, contour, color). In 2016 it was overhauled and modified installed including conveyor control. Tech Specs: - Capacity: 5,000 – 50,000 bottles / h - Compact installation dimensions - 2016 overhauled and modified Features: - Processes all standard inspections: sidewall, infeed, neck finish, bottom, discharge, HF caustic and IR residual liquid detection - Separate module for foreign bottle detection Chsdpfsukafrex Abhod (height, contour, color)

Condition: new, table length 2000 mm table width 1000 mm table height 900 mm table load 3000 Kg Chodpfx Aoyv I Hwjbhod weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Including base bearings, 110mm diameter

Condition: used, - Diameter 2000 x depth 3000 Cedpfex Rz Svox Abhshd - Side hatch - Total emptying

Condition: new, table length 2990 mm table width 1490 mm table height 850 - 900 mm weight of the machine ca. 0,8 t Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Chjdpoxpxrhsfx Abhsd Accessories optional! Surface flatness 0.2 - 0.5 mm over 1000 mm.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: ET2-120-IP19, The aim of the labeler is to label flat bags from one side. - Liner material: translucent paper (tear-resistant) Cjdpfeq U Sfwox Abhohd - Repeat length: Label length + min. 3mm - Machine materials: SS304 and anodized aluminium alloy - Stepper and servo motors for precise positioning of the label - Controlled by a Siemens PLC - Label roll inside: 76 mm - Label roll outside: max. 350mm - Accuracy: ± 1 mm (except for product and label errors) - Label dimensions (LxW): 15-300mm x 10-130mm - Power: 2.0kW / 230V / 50Hz - Dimensions (LxWxH): 2,000mm x 800mm x 1,500mm - Weight: approx. 180 kg