Powerlock cutterhead Weinig 310 mm

Weinig HSK Powerlock 125x310

Condition: used, Year of construction: 1992, Perfect binding line Müller Martini Year: 1992 Consisting of Book block feeder ITM Gathering machine Müller Martini 210-E Description: - Hand feeding station - Number of gathering stations: 18 - Pump(s) - Set up element - Criss cross delivery - Book block feeder: 3606 - Transfer into the binder Perfect binder Müller Martini 3006 /30" Hour counter: +/- 14.700 Description: - Number of clamps: 30 - Main milling station Dodpfx Asvgt Dksa Nout - Roughening station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared): IRT - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Probag - Base for side glue system - Hotmelt side glue unit, interchangeable - Gauzing station - Stream cover feeder - Scoring station - Pump(s) - 1st nipping and pressing station - HF High Frequency dryer - 2nd nipping and pressing station - Lay down device (to the left) Transport system Müller Martini

Condition: ready for operation (used), Year of construction: 1990, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 0651044, color channels: 1 kleur, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 105 mm, paper height (max.): 360 mm, space requirement length: 1,800 mm, space requirement width: 1,290 mm, space requirement height: 1,650 mm, counter reading (black): 1,30,84,844, type of input current: three-phase, input current: 16 A, input voltage: 220 V, Equipment: documentation/manual, In exceptionally good and original condition, only 13 million prints (!) High-quality "heavy duty" B3 (35x50cm) 1-colour offset machine for high-quality streak-free printing due to typical constructive qualities; Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. For the complete specification see the PDF files at the bottom of this advertisement page. If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Some specs: Maximum production speed 11,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Maximum printing surface 500 x350mm Plate size 510 x 410 to 420 mm Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Staffing insert Height of the stack in the insert 900 mm Height of the stack in the delivery 450 mm Djdpfov Nv Svjx Aa Nout Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 3.2kW Built-in circulation pump and water tank for the damp work Dimensions L x W x H = 1800 x 1290 x 1650 mm Net weight 1,960 kg Machine is supplied with oil drip plate Input voltage is 3 x 200/220 VAC, no transformer included

Condition: good (used), Year of construction: 1976, Polygraph OM II Letter press machine good condition running in production Dedetdcipspfx Aa Nsut avaiable immediately

Condition: used, Steuerkarten für Schneidmaschine Polar 115 CE Control Cards for Guillotin Polar 115 CESchaltpläne / Eletric diagram 115CE - E - 10 - 50 -Polar 012720 - Card 1 Polar 015099 - Card 2 Polar 012765 - Card 3 Polar 012991 - Card 4 Polar 015773 - Card 8 Polar 023467 - Card 9 Polar 015291 - Card 7 Polar dc429 - Card 11 Polar 015130 - Card 12 Polar 012384 - Card 13 Polar 012388 - Card 14 Polar 011245 - Card 15 Polar 012352 - Card 16 Polar 011442 - Card 19 Polar 011363 - Card TI Polar 011364 - Card TII Polar 011365 - Card TIII Polar 015138 - Card B1 Polar 011438 - Card 211825 Polar 011423 - Card 17 Polar 011422 - Card 18 Polar 011308 - Card 20 Polar 011440 - Card 21 Dodpoq Rx Syjfx Aa Njut Polar 011439 - Card B3 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), HPM 92 Paper Cutting Guillotine Machine in very good condition, ready to work. Year of manufacture: 2009. High quality. Technical specifications: Dusdoywdpkjpfx Aa Nst Cutting width: 920 mm Stack height: 120 mm Weight: 2500 kg 380V power supply Equipment: – Programming unit with color touchscreen monitor (Mitsubishi Manufactured) – Air table – Enlarged side tables – Photocells – Chrome table surfaces – Spare knife Machine modeled after the German Polar, very solidly built, with Western electronics (Schneider, Mitsubishi, Eaton). Very stable rear frame construction, CNC rail guidance, ball screw drive.

Condition: used, Year of construction: 2006, PQC Console High Pile Delivery PDC-S: Print Density Control Komorimatic Dampening Unit Semi Automatic Plate Change Plate Cylinder Cocking Dsdpfxsy Dvulo Aa Nout Ink. Temperature Control Automatic Blanket Washing Device Chromed Plate Cylinder Chromed Impression Cylinder CIP3 Coating Unit Extended Delivery IR Dryer Powder Sprayer Impression Account: 240 Mio.

Condition: ready for operation (used), Year of construction: 1989, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 20216035, color channels: 2 kleuren met keertrommel ook 1/1, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 102 mm, paper height (max.): 360 mm, total length: 2,800 mm, total width: 1,250 mm, total height: 1,690 mm, space requirement length: 2,800 mm, space requirement width: 1,250 mm, space requirement height: 1,690 mm, counter reading (black): 1,15,00,000, type of input current: three-phase, input current: 16 A, input voltage: 200 V, Equipment: documentation/manual, In exceptionally good and original condition, only 11.5 million prints (!) High-quality "heavy duty" B3 (35x50cm) 2-colour offset machine for high-quality streak-free printing due to typical constructive qualities; The turning device is in excellent condition. Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. For the complete specification see the PDF files at the bottom of this advertisement page. If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Some specs: Maximum production speed 11,000 sheets/hour with clean and weather printing 9,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Maximum printing surface 500 x350mm Plate size 510 x 410 to 420 mm Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Staffing insert Dedov Nwgnjpfx Aa Njut Height of the stack in the insert 900 mm Height of the stack in the delivery 450 mm Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 4.75 kW Built-in circulation pump and water tank for damp work Dimensions L x W x H = 2800 x 1250 x 1690 mm Net weight 3,560 kg Machine is supplied with oil drip plate Input voltage is 3 x 200/220/230 VAC or via the supplied transformer 3 x 380/400/415 VAC

Condition: used, Year of construction: 1998, Offset 2 color Shinohara 66-2 Year: 1998 Number of impressions (mio): 79 Machine control - Shinohara console Printing units - Number of printing unit(s): 2 - Straight machine - SAPC Semi Automatic Plate Change - Cooling system - Dampening system: Shinohara Dusdpjywv Ewofx Aa Njt Delivery - Standard delivery - Powder spray: OxyDry Accessories - Plate bender: on delivery Max. output (s/h): 11000 Max. sheet size (mm): 483 x 660 Min. sheet size (mm): 200 x 296 Max. paper thickness (mm): 0,4

Condition: used, CNC Control, -Transfer in current condition as seen -unchecked from stock -Manufacturer: Siemens -Type: Simatic Sinumerik 3M 6FC 3441-OFA-Z -Power supply: 1 Dodpfx Aec Itmcsa Nout -Control cards: 10 -Type: Sinumerik 03810 -Type: Sinumerik 03200 -Type: Sinumerik 03260 -Type: Sinumerik 03310 A/B -Type: Sinumerik 03320 -Type: Sinumerik 03840 -Type: Sinumerik 03160 -Type: Sinumerik 03830 -Type: Sinumerik 034 -Type: Sinumerik 03 -Dimensions: 550/320/H440 mm -Weight: 13 kg

Condition: good (used), Perfecta 92 TS ASE Paper Cutting Machine The machine is in very good condition, manufactured in 2011. This machine features a waste removal system. A unique machine on the market. Owned by the same company since new. Dujdpjy E Eyysfx Aa Net Under a service contract until the very end. Technical Specifications: Cutting Width: 920 mm Stack Height: 120 mm Weight: 2000 kg Power Supply: 400V Equipment: – ASE Automatic Waste Removal System with conveyor belt (automatically divided work table) – Programmer with 19” touchscreen monitor – CIP-3 and CIP-4 operation, cutting visualization on the monitor – Memory expansion via USB, network connectivity – Photocells – Air table – Cutting line – Chrome-plated table surface – Enlarged side tables – Servo-driven rear saddle control – super-fast operation, always stops at „0” – Hydraulic clamp with smooth force adjustment – User’s manual – Tool set – Press plate – Tapping block – Spare knife