4 side moulder
WEINIG Variomat_Multifunktionstisch

Name: WEINIG Variomat_Multifunktionstisch
Brand: WEINIG
Availability: InStock

Condition

Used

Location

Oberkochen Germany

4 side moulder WEINIG Variomat_Multifunktionstisch

Show map

Machine data

Machine type:: 4 side moulder

Manufacturer:: WEINIG

Model:: Variomat_Multifunktionstisch

Condition:: used

Price & Location

Location:: Oberkochen

Call

Details about the offer

Listing ID:: A19404161

Reference number:: 1305-2796

Update:: 25.06.2025

Description

Number of spindles 5 St.
Working width 20 - 230 mm
Working height 8 - 120 mm
Length of the planing table 2000 mm
Feed motor 1,1 kW
Feed speed stufenlos regelbar 2 - 12 m/min.
1 WEINIG VARIOMAT planer and moulder including multifunction / slotting table
-----
Machine will be cleaned and functionally tested before delivery !

Technical manufacturer's description:
-----
Working width: 20 - 230 mm
Working height: 8 - 120 mm

1st spindle horizontal, bottom
-----
Motor with brake: 5.5 kW
Diameter 40 mm
Speed ??6000 rpm
Tool radius 125 - 145 mm
Axis adjustment range 5 mm
Folding device including rebate cutter
MarathonCoating for table insert before and after the 1st lower spindle

2nd spindle vertical, right
-----
Motor with brake: 11 kW
Common motor with left vertical spindle
Diameter 40 mm mm
Speed ??electronically adjustable 3000 - 6000 rpm (for 11 kW/15 HP)
Tool cutting radius for longitudinal machining 93-232 mm
Minimum tool diameter at stop plane: 93 mm
Maximum tool diameter behind stop plane: 180 mm
Maximum throat depth 45 mm
Axially adjustable travel 30 mm
Insertion segment, including additional stop lip 125 mm
Insertion segment, including additional stop lip 150 mm

3rd vertical spindle, left POWERLOCK/HSK
-----
Shared motor with 1st right spindle
PowerLock tool holder
Shared speed with right vertical spindle
Tool cutting radius for longitudinal machining 93-232 mm
Maximum throat depth 45 mm
Minimum throat depth with tool cutting radius 200 mm: 20 mm
Axially adjustable travel under table 30 mm
Insertion segment 125 mm
Insertion segment 150 mm

4th spindle, horizontal, top
-----
Motor with brake: 5.5 kW
Diameter 40 mm
Speed ??6000 rpm
Tool cutting radius 125-200 mm
Maximum chamfering depth 30 mm
Minimum chamfering depth with a tool cutting radius of 200 mm: 20 mm
Axially adjustable range 30 mm
Nwjdpfx Aowugpbjg Njc
Glazing bead removal after the upper spindle

5th spindle, second, horizontal, bottom
-----
Motor with brake: 4 kW
Diameter 40 mm
Speed ??6000 rpm
Tool cutting radius 125-200 mm
Maximum chamfering depth 15 mm
Axially adjustable range 10 mm

Machine operation
-----
Both axes of all spindles - with the exception of the first lower spindle - are
equipped with
mechanical digital displays.

Central radial adjustment with mechanical digital display of the feed rate
along with the pressure in front of the upper spindle.
The pressure after the upper spindle can be adjusted separately.

Memory function
-----
For saving the setting values ??of profiles
Tool holder axes and pressure elements before and after the upper
tool holder with electronic dual displays:
Function:
-Saving the setting values ??of the finished profile at the touch of a button
under a
profile number
- When the profile number is selected again, the electronic dual displays
show the setting values
- By manually adjusting the tool holders and pressure elements,
the displays are aligned
- 99 memory locations

3 axial CNC-controlled adjustment and positioning of the spindles
in conjunction with the memory function. For spindles 2, 3, an...

Seller

Registered since: 2002

113 listings online

Call

Send inquiry

Telephone & Fax

+49 7364 ... show

+49 7361 ... show

Fax:

These listings may also fit your interest.

Listing

Tauberbischofsheim

6,809 km

Four-side moulder
WeinigUnimat 23 E

Call

Listing

Egenhofen

6,695 km

Pull saw
GrauleZS170NF

€10,900

fixed price plus VAT

Call

Condition: new, Year of construction: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm miter range horizontal: 45°-90°-25° Miter range vertical: 60° - 90° - 30° Pivot adjustment with crank: yes roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800rpm Engine power: 3 kW Motor brake: yes Suction connection: 100mm Nedpfsizkhvsx Ag Newc Length roller conveyor: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

See details

Listing

2009 Biesse Rover C 6.40 Biesse Rover C 6.40

Sesto Calende

6,884 km

2009 Biesse Rover C 6.40
BiesseRover C 6.40

Call

Condition: used, Year of construction: 2009, Biesse Works Control Working range on X axis mm 3500 Working range on Y axis mm 1585 Working stroke in Z axis mm 350 N ° 2 work fields Bar worktop No. 8 adjustable bars N° 4 pneumatic Bakelite bars for lifting the panel No. 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 4-axis vertical electrospindle (Vektor), with automatic tool change, HSK type cones 10-position rotary tool change system on the operating head 24-position chain tool change system - located on the rear of the chain machine Drilling head with vertical and horizontal spindles composed as follows: n. 12 vertical spindles in X n. 12 vertical spindles in Y n. 6 horizontal spindles in X n. 4 horizontal spindles in Y n. 1 independent blade for making X-grooves Front protection and safety system with carpets Perimeter protection grids Chip evacuation system with motorized belt Air conditioning system for cooling and cleaning of machine control Vacuum pump 250mc/h TECHNICAL DETAILS TO BE CHECKED Nedpfjw D Dhajx Ag Nswc

See details

Listing

CNC shaper "CASOLIN" model F90 KTL CASOLIN F 90 KTL

Villesse

6,511 km

CNC shaper "CASOLIN" model F90 KTL
CASOLINF 90 KTL

Call

Condition: used, 2-axis CNC spindle moulder "CASOLIN" model F 90 KTL USED MACHINE - V380/50 - "CE" [code: TOU-051] Complete with: * extended infeed table 1990x770 mm * extendable support bar * tenoning guard (for tools max. diameter 330 mm) * tenoning carriage * pendant control * support for powered feed unit * 4-roller feed unit "MAGGI" * strip protection device Nsdpfx Ajw Awk Seg Newc * spindle diameter: 40 mm * spindle speeds: 3000/4500/6000/8000/10000 rpm * motor power: 7.5 kW

See details

Listing

Painting Line Venjakob Perfect, OIR, Air Jet, 3D- Venjakob VEN SPRAY and Drying, UV Line

Germany

6,955 km

Painting Line Venjakob Perfect, OIR, Air Jet, 3D-
VenjakobVEN SPRAY and Drying, UV Line

Call

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Nwjdpfeu Afu Rjx Ag Njc Further information: On request

See details

Listing

100,000 liters / 100 m³ extinguishing water tank BARTH

Forst

6,887 km

100,000 liters / 100 m³ extinguishing water tank
BARTH

Call

Condition: refurbished (used), Extinguishing water tank according to DIN 14230 (underground extinguishing water tank): 100,000 liter extinguishing water tank for underground storage, single or double walled, 1 manhole DN 600 with blind cover incl. seal and screws, outside with bitumen insulation - second-hand -... tank volume: 100.000 liters / 100 m³ length: approx. 15.750 mm diameter: approx. 2.900 mm weight: approx. 11.600 kg Material: steel material S 235 JRG 2 The tank has an extinguishing water suction connection according to DIN 14244 with a mounted fire department coupling/fixed coupling A according to DIN 14319 in the design form B without gauge connection. Furthermore, the tank has a venting flange connection in NW/DN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground. - The tank is emptied, cleaned and has been provided with a bituminous exterior coating by us at the factory. On request, we can provide the tank with a bitumen-based full interior coating (against corrosion) or epoxy resin interior coating We can offer you a cost-effective delivery with our own truck. Just let us know the place of delivery, you will immediately receive the exact freight costs. An inspection is possible at any time after prior appointment. If you need any further information, just give us a call or send us an e-mail to b.barth(at)barth-tank.de. Trade-in and purchase of tanks/vessels is possible, just contact us. We have such tanks of course also in the following sizes constantly in stock: Nwsdpfx Aoi Enwvsg Nec - 10.000, 13.000, 16.000, 20.000, 25.000, 30.000, 40.000, 50.000, 60.000, 80.000, 120.000 liters.

See details

Listing

Step By Step Wet Painting Systems PROTON STP-STP

Luckenwalde

6,581 km

Step By Step Wet Painting Systems
PROTONSTP-STP

Call

Condition: new, Step By Step Wet Painting Systems Elboy Industrial Solutions designs and manufactures full range of paint shops for your product. With ELBOY, you can navigate through your facility with virtual reality in the design phase, enabling you to make the desired changes in the design phase and not to encounter the surprise results. It provides designing and manufacturing services for your application by paying special attention to environmental pollution and work safety issues for the processes of Sandblasting, Putty, Washing, Undercoat and Finishing Coat for all sizes of products. Step by Step are systems with overhead conveyor or floor conveyors which can be designed for all sizes of product. Booths of Sandblasting, Chemical Washing, Pre-coat, Drying, Putty , Top Coat and Baking can be integrated into the system. Nodpedy Dw Aefx Ag Nowc In order to respectively carry out the processes determined by the system step by step, the automatic doors are opened at the end of the time period and the product automatically proceeds to the next process line. These fully automated systems are controlled via a 15” touch screen and provide various reporting methods such as main computer monitoring, product reporting and score reporting upon the demand and provide remote control. These are the paint shops where your product is designed and manufactured by our engineers in line with your capacity, use area and other demands. Maximum efficiency is aimed to be provided with minimum staff and the least space usage at electrostatic powder coating or wet paint, sandblasting, varnishing, coating, washing and similar system requirements.

See details

Listing

Oberkochen

6,774 km

Cross cut saw
SALVAMACLegend 500

Call

Condition: used, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw ----- ----- Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm. When sawing stacked boards h max. 100 mm. The structure is made entirely of thick-walled and reinforced throughout painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cutting control in ergonomic position. Engine power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balance and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different Types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. The CE models must come with it as standard At least 1 meter long support plates/roller tables must be provided at the inlet and outlet. Nedpfx Agov Uq Tlo Newc Technical data: ----- Saw cross section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz, 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 Machine additionally equipped with: ----- 2 m infeed table (right of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. load capacity 230 kg, Diameter 60 mm, distance 250 mm, width 320 mm. The space between the roles is enclosed in painted steel. Including lateral guidance. 2 m outfeed table (left of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. Load capacity 230 kg, diameter 60 mm, distance 250 mm, width 320 mm. The space between the rollers is of enclosed in painted steel. Includes side guide, stop guide and millimeter scale. 2 pieces of strong pneumatic stops with a width of 200 mm ----- Total price ex works: on request! ----- Image and video not original, show identical model Further options such as longer inlet/outlet, stop systems on request! (technical data according to the manufacturer without guarantee!)

See details

Listing

Four Side Planer WEINIG profimat 23 fortec

Grońsko

6,384 km

Four Side Planer
WEINIGprofimat 23 fortec

€16,350

fixed price plus VAT

Call

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm Nwjdpfxorigxyo Ag Njc machine checked in original condition

See details

Listing

Veneer gluing machine Fisher+Rückle AG Omnimaster-900

Eich

6,917 km

Veneer gluing machine
Fisher+Rückle AGOmnimaster-900

Call

Condition: excellent (used), Year of construction: 2011, operating hours: 216 h, functionality: fully functional, machine/vehicle number: 20MS090000/007, total length: 3,000 mm, type of input current: AC, total width: 2,500 mm, total height: 1,900 mm, overall weight: 1,450 kg, empty load weight: 1,450 kg, working width: 900 mm, compressed air connection: 6 bar, throughput speed: 50 mm/s, Gluing and longitudinal splicing machine For 0.4 to 3 mm thickness with direct gluing. With pre-gluing of edges up to 5 mm. Machine used very little, available ex location. Features: - Separate electric motors for chain and glue application - Glue is applied to the edge of the newly inserted veneer strip, increasing the strength of the glued joint - Robust, durable stainless steel conveyor chain with weighing joints - Separate temperature, speed, and pressure adjustment - Quick and easily accessible glue reservoir for fast and simple refilling or cleaning - Multiple heating zones for individual temperature adjustment - Extended service life of glue reservoir due to integrated cooling unit - Infinitely variable feed speed INCLUDES GLUE COOLER Technical specifications: Throat depth: 900 mm Nwsdpsw E Rfbjfx Ag Nec Minimum veneer strip width: 45 mm Minimum veneer strip length: 300 mm Veneer strip thickness: 0.4 – 3.0 mm (up to 5 mm) Veneer moisture content: max. 8 – 12 % Working height: 900 mm Feed speed: 5 – 50 m/min Heating section length: 1000 mm Maximum heating temperature: 250°C Electrical connection: 9.0 kW, 400 V, 50 Hz Compressed air: 6.0 bar Dimensions (L x W x H): 2400 x 2300 x 1900 mm Weight: 1500 kg

See details

Advertise here