Toolholder

Werkzeug- / Tool Package DS 16x SK 50

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, table load: 10,000 kg, spindle speed (max.): 6,000 rpm, table length: 1,800 mm, table width: 1,800 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, Equipment: rotational speed infinitely variable, The LAGUN TM 4 is a highly stable traveling column milling center with a T-shaped frame, featuring a large rotary table and a large working area diameter. It offers maximum flexibility and is ideally suited for the precise machining of large and complex workpieces. Its advantages: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Technical features: Control system: ✔ HEIDENHAIN TNC 7 ✔ HEIDENHAIN 24" TFT screen ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Coolant system: Internal coolant supply (ICS) 36 bar Tool changer: 60-position chain magazine with dual gripper Chip removal: 2 x hinged belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positional accuracy: ± 0.020 mm Njdpfjq I Nkbox Ab Usdb Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and prepare a customized offer for you.

Condition: excellent (used), Year of construction: 2000, turning length: 2,000 mm, spindle bore: 105 mm, spindle motor power: 21,000 W, total height: 2,100 mm, total length: 4,500 mm, total width: 2,000 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, turning diameter over bed slide: 620 mm, workpiece weight (max.): 2,500 kg, overall weight: 7,800 kg, Very little hours Hydraulic tailstock CE Safety doors Multi Fix Tool holders system  D1 Chip conveyor Nodpsyuchrefx Ab Uodb Swing over bed Ø: 620mm Swing over cross slide Ø:370mm DBC Turning Length: 2000mm Spindle bore: 105mm Spindle power: 21kW Tailstock spindle Ø: 100Ø Stroke pinole: 200mm Spindle taper: 6Mk Workpiece weight: 2500 Speeds / ranges: 1600Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Length: 4500mm Width: 2000mm Height: 2100mm Weight: 7800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Technical details: Nedpjvfdr Nofx Ab Uodb Tool holder shaft type: BT 40 Tool holder shaft type: Futter / Chuck Tool holder shaft type: Weldon Big selection of BT 40 Tool holders for sale. All kinds of Weldon, Chucker etc. available. See pictures. *

Condition: used, diameter div. number 40x tool adaptor BT 40 Ndedpfx Ajww Nbxjb Uob

Condition: like new (used), For sale is a used Record Power band saw BS 300 E with a cutting width of 305 mm. The saw is in nearly new condition and has been reconditioned and inspected by our professional staff. (Fully functional) Technical data: - Cutting height: 190 mm - Cutting width: 305 mm Ndedsyx Daljpfx Ab Ujb - Saw blade length: 2370 mm - Blade width: 8-15 mm - Table tiltable 90-45° - Includes base with wheels The band saw is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: band saw, saws, saw, band Reference: R-AT0EF

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker Ndjdpfx Abexb U Txs Ueb 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.

Condition: new, Year of construction: 2020, pressing force: 300 t, machine/vehicle number: DF0240 - Rev.00, pressure:300 t passage width:600 mm stroke:500 mm Nodpodxvfkjfx Ab Uodb Weight of machine approx.:8,5 t dimensions:ca. 2275 x 1650 x 4050 mm Return Capacity:30 t Engine Output:30 kW Max Working height:800 mm Approaching Speed max. :10 mm/sec Pressure Speed:10 mm/sec Travel:500 mm Ram plate:600 x 600 mm Table size:600 x 600 mm Table height above ground level (approx.):850 mm Oil Tank Capacity:350 l Oil cooling (electric):1,5 kW (max) ejector stroke:250 mm pressure of ejector:50 t Maintenance Balcony:2.800 ? Drip pan to prevent oil spil:2.800 ? Upper and lower tooling (for 8kgs salt stone):11.000 ? automatic filling with 500 kg depot:58.000 ? speed increase to 80 mm/sec:19.000 every additional meter conveyor belt:850 ? Light barriers front and back:6.800 ? Side trim:4.200 ? 7m roller coaster-for salt stone transport and interim storage:12.900 ? Faster Version with approach and working speed at 60mm/sec ist available on request. Price (excl. options): 117.500,--

Condition: used, Year of construction: 1992, functionality: fully functional, pressing force: 250 t, stroke length: 400 mm, table width: 1,250 mm, table length: 1,150 mm, die cushion stroke: 150 mm, installation height: 700 mm, Hydraulic double column press DUNKES HDS 250/10 Year of construction 1992 Technical data: Pressing force at 260 bar: 250 tons Rapid lowering speed: 365 mm/s Table clamping area approx.: 1150 x 1250 mm Ram clamping area approx.: 1150 x 1250 mm Die cushion area approx.: 800 x 1000 mm Die cushion pressing force (200 bar): 100t Die cushion stroke: 150mm Power requirement: 45 kw Nedjup Si Hjpfx Ab Uedb Installation height: 700 mm ram stroke: 400 mm Conversion of the control system to SIEMENS (in 2005) Machine height approx. 5,400 mm TP language currently Polish

Condition: used, mileage: 20,805 km, power: 70 kW (95.17 HP), first registration: 04/1987, fuel type: gasoline, empty load weight: 2,240 kg, maximum load weight: 1,260 kg, overall weight: 3,500 kg, tire size: 205R14C, axle configuration: 4x2, wheelbase: 3,350 mm, color: red, driver cabin: day cab, gearing type: mechanical, suspension: steel, number of seats: 6, Equipment: additional headlights, cabin, trailer coupling, Vehicle location: Bovenden, license plate house, switch 5, high beam headlights, rotating beacon, leaf spring suspension, tow bar ball head, doors, side door right, side door left Nedpfx Abevhkh Ao Uedb Wheelbase: 3350 mm Body: panel van with sliding door left & right, Ziegler body! (WITHOUT TRAGKRAFTSPRITZE) The sale to tradesmen or export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Year of construction: 2002, condition: used, Technical details: stroke height: 8080 mm work height max.: 10080 mm lifting capacity: 450 kg axle distance: 1,86 m speed: 35 km/h stroke speed: 51 sec. control voltage: 24 V - 250 A V / A operating pressure: 220 bar machine weight approx.: 2330 kg dimensions LxWxH: 2,65 x 1,20 x 2,3 m LIFTING JACK SYSTEM - without battery on Sale, without (Accident Prevention Regulation), upgrade on customer side possible Work platform - scissor lift table Hydraulic mobile elevating work platform last inspection according to DGUV 308-002 from 06/2023 Load capacity 450 kg, 3 persons included Manual lateral force 40 daN Floor height 8.14 m Lifting height, retracted incl. railing: 2.26 m Lifting height, retracted platform: 1.14 m Lifting time 51 sec. Lowering time 42 sec. Platform dimensions 2.3 x 1.2 m 4x hard rubber tires Ø 380 x 130 mm, 2x steered and 2x driven wheels * Nodpfxova A D Ts Ab Uodb