Suction

WINTER CLEANER ECO-3500

Condition: new, Year of construction: 2024, operating hours: 50 h, machine/vehicle number: 305, Available: February 2023 Control: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with T-slots across every 250 mm Max load: 1000kg distributed over the entire surface 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 min-1 Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blowing air / MMS: outside Drives linear axes Feed speed X and Y axes: up to 50 m/min Gsdpfewwq Hcjx Ag Sjuh Z-axis feed rate: up to 30 m/min Color Housing, portal, control cabinet: light gray Z-slider and milling head: orange Additional equipment - 15-way tool changer - Control in a separate, rollable desk

Condition: new, Year of construction: 2026, CORMAK ZX 40BPC is a solid metal drilling and milling machine. Possibility of head rotation +/- 90 degrees of spindle, possibility of head rotation +/- 90 degrees, automatic spindle feed, right and left rotation, large table, liquid cooling, automatic table feed in the x axis, powerful engine, ability to drill up to 40 mm. Rotational speed up to 2500 rpm Machine characteristics HEAVY STABLE CAST IRON AUTOMATIC SPINDLE FEED ADJUSTABLE HEAD HEIGHT MASSIVE CROSS TABLE WITH PRECISELY GRINDED SURFACE DOVtail-shaped guides QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATIONS ROTATING HEAD +/- 90° Technical data Max. drilling size (steel/cast iron) 32/40mm Face milling width 80mm End milling width 22mm Spindle extension 125mm Spindle taper MT4 Spindle speed (1400 rpm motor) 50～2500min-1 Maximum distance of the spindle tip from the table 735mm Maximum distance of the spindle tip from the base 1245mm Distance of the spindle from the column surface 272 mm Dimensions of the work table 730x210mm Base dimensions 690x520mm Engine 1.3/1.8kW Cooling engine 40W Dimensions 1200x1000x1910mm Guedevxhfmepfx Ag Seh Weight 440 kg

Condition: new, Year of construction: 2026, Sawdust extraction HOLZING RLA S 300 8900 m3h extraction capacity ~ 8900 m3/h engine power 7.5 kW rotational speed 3000 rpm rated voltage 400 V, 50 Hz extraction port 300/200 mm extraction speed 28 m/sec. Number of filters 45 G filter category Polyester filter material Sound level 80 dB without connection / 65 dB when connected through the pipe to the machine Guodpfx Aolkd Spjg Soh Filter area 22 m2 Overall dimensions (length x width x height) 2260/920/2140 mm Weight 274 kg The suction fans are located in the vacuum cabin on the clean side of the air in special sound-absorbing cabins. They have a special blade design, which makes them more efficient and effective and also contributes to electricity savings.

Condition: good (used), Year of construction: 2003, 5X PIECES handling devices Geiger Type: EA-Mini 2001 SLI Guedpfx Ajlwqrhog Sjh Year of manufacture 2001

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM500 Dust Collector is a heavy-duty industrial dust extraction system designed for intensive use in large woodworking shops, furniture manufacturing plants, and production facilities. With an impressive 5,000 m³/h airflow capacity, a robust steel construction, and the ability to connect up to four woodworking machines simultaneously, the FM500 delivers reliable, continuous dust extraction while maintaining a clean, safe, and efficient working environment. Key Features 2.8 kW (S1) three-phase motor / 400 V – designed for continuous industrial operation. Airflow capacity of 5,000 m³/h – efficiently extracts sawdust, wood chips, and fine dust from up to four machines at the same time. Vacuum pressure up to 2,500 Pa – provides consistent suction performance, even under heavy dust loads. High-efficiency metal impeller – dynamically balanced for smooth, low-vibration, and quiet operation. Quick-release collection bag system – allows fast and tool-free bag replacement. Large 480 L waste collection capacity – minimizes downtime by reducing the frequency of bag emptying. Multi-port inlet manifold (Ø200 mm / 4 × Ø100 mm) – compatible with multiple woodworking machines. Mobile wheeled base – enables easy movement around workshops and production facilities. Construction and Technology The FM500 is built around a heavy-duty steel frame that ensures durability and long-term stability. A large-diameter, high-performance fan operating at 2,950 rpm generates an air velocity of up to 31 m/s, delivering powerful and consistent extraction performance. The machine is equipped with woven fabric filter bags (Class II filtration) capable of capturing dust particles as small as 5 microns, helping maintain clean air in the workplace while supporting compliance with occupational health and safety standards. Performance and Efficiency The CORMAK FM500 woodworking dust collector maintains stable suction power during prolonged operation, making it suitable for continuous production environments. It can effectively serve up to four workstations simultaneously without compromising extraction performance. The large filter surface area and high-capacity collection bags reduce maintenance intervals and maximize productivity. Applications Guedpfx Aovu Aqpjg Soh The FM500 is ideal for: Woodworking and furniture manufacturing workshops Timber processing and panel production facilities Technical schools and vocational training centres with multiple workstations Production lines requiring centralized dust extraction systems Standard Equipment Two fabric filter bags Two waste collection bags Inlet manifold (4 × Ø100 mm + 1 × Ø200 mm) Mobile base with heavy-duty wheels Optional Equipment Cartridge filter (2-micron filtration) Flexible extraction hoses (Ø100 mm / Ø200 mm) Galvanized hose clamps Technical Specifications Specification Value Motor power (S1) 2.8 kW Power supply 3-phase, 400 V / 50 Hz Motor speed 2,950 rpm Airflow capacity 5,000 m³/h Maximum vacuum pressure Up to 2,500 Pa Air velocity Up to 31 m/s Filter bags Woven fabric (Class II filtration) Waste collection capacity 480 L Inlet connections 1 × Ø200 mm / 4 × Ø100 mm Overall dimensions (L × W × H) 1,525 × 560 × 2,460 mm Weight 64 kg

Condition: new, Year of construction: 2026, shaft diameter: 50 mm, - Shaft diameter 50 mm - Rotates clockwise and counterclockwise - Suitable for horizontal/vertical use - Foot control - Emergency stop - Documentation - 400V Gujdpfowv Ufaox Ag Sjh

Condition: new, Year of construction: 2026, extraction capacity ~ 6500 m3/h engine power 5.5 kW rotation speed 3000 rpm nominal voltage 400 V, 50 Hz extraction nozzle 280/200 mm extraction speed 28 m/sec. Number of filters 35 DIMENSIONS (length x width x height) 920 x 2100 x 2250 mm weight 410 kg Filter category G Filter material polyester Noise level 80 dB without connection / 65 dB when connected via pipe to the machine Filter surface 17.1 m2 Negative pressure 3000 Pa Polyester filter, 3 microns Gusdsv Du Tnjpfx Ag Soh 2 containers Drive system Filter cleaning using vibration system with control + 850 euros for the models with fire extinguisher (Safe System) + 500 euros for the models with inverter (speed control)

Condition: new, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 50.0 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 615 x 430 mm threading 24 in ST M threading 30 in GG M turning speeds 100 - 1.800 U/min feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm total power requirement 0.6 / 1.8 kW Gujdexaa R Hopfx Ag Seh weight 470 kg height of the machine 1865 m Furnishing: - Electromagnetic feed clutch - with overload protection and electrical cross-handle switch - Lockable main switch - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Spindle protection with electrical fuse - Motor insulation class "F" (155 degrees) - Operating instructions in German including special equipment: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "A" pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 (5-digit LED display)

Condition: good (used), Year of construction: 2014, functionality: fully functional, overall weight: 2,200 kg, KUKA KRC4 linear axis 1500/3T Article number: 8143984 Guedpsvzr Svsfx Ag Ssh Serial number: 143984 The KUKA KRC4 linear axis is a high-quality axis that is ideal for industrial applications. It offers precise motion control and is particularly important for automation processes and robotic systems in manufacturing. With its robust design, it guarantees reliable performance in demanding applications.

Condition: new, Year of construction: 2026, The ATC series was created for professional use in large industrial plants and factories. Like the plotters of the SPECIAL series, it can be designed for machining various materials. To meet the demands of heavier machining, ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The standard in these devices is a vacuum work table. It is also possible to install a hybrid table. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites -PVC - non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. MATERIAL FASTENING: The machine is equipped with a vacuum table. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 300 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. Gusdpoin Etzsfx Ag Seh SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 ISO30 cones. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.