Panel sizing circular saws

WINTER FS315-1200

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: HaRo2020, total width: 800 mm, total height: 1,100 mm, total length: 1,200 mm, briquette diameter: 60 mm, overall weight: 300 kg, warranty duration: 12 months, type of input current: AC, input voltage: 400 V, power: 3 kW (4.08 HP), Equipment: emergency stop, Our new HaRo2020 briquetting press, with a capacity of up to 40 kg/h, automatic tongs, and pre-compactor, is manufactured by ourselves. You can only purchase this machine directly from us, as we do not use intermediaries. The briquetting presses are CE-compliant and manufactured according to the latest standards. Since we produce most of the components in-house, we can offer the machine at a particularly competitive price. Price is exclusive of VAT. The new hydraulic unit is equipped with a SILENCE-PUMP, making the machine extremely quiet in operation. Another benefit of the helical gearing in the pump is increased durability. Everything is made in Germany! You are welcome to visit us and test the machine with your own material. When purchasing our briquetting press, you will receive a detailed and comprehensive German (PDF) operating manual for this machine. The input material must have a moisture content below 15%—ideally 10 to 12%—for sawdust and planer shavings. Technical Data – Hydraulic unit: 3.0 kW (connected load) – Power consumption per hour: approx. 1.8–2.0 kWh – Throughput: approx. 15–40 kg/h Nledpfxew A Hvde Ab Ujg – Voltage: 400 V – Frequency: 50 Hz – Circuit protection: 16 A plug – Power cable length: 3 m – Hydraulic control with Bosch Rexroth valves – Briquette diameter: 60 mm (length varies according to material) – Motor equipped with motor protection switch and emergency stop—for operator and machine safety, including motor protection – No electronic components prone to failure such as controllers, sensors, or complicated electronics – Pressing without additives – Counter-pressure adapts fully automatically to your material – Thanks to the pre-compactor, bulky shavings are no problem – No adjustments or monitoring of the pressure required – Fully automatic operation Spare parts supply is guaranteed, as we manufacture the machines in small series in our facility in Germany. The large oil tank ensures that the oil will not overheat during continuous operation. Machine dimensions: Length: 1.25 m Width: 0.82 m Height: 1.11 m Feed hopper: Diameter approx. 80 cm x height 60 cm Weight: 300 kg The briquetting press is immediately operational and does not require installation—just plug it in and start working. The machine can be viewed and tested on-site. You are welcome to send us a sample of your material for testing; we find this is the most effective method.

Condition: new, Year of construction: 2025, Suction nozzle diameter: 1 x 200, 3 x 100 mm Nominal air flow rate: 1760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240 l Filter cleaning: motorized Motor power: 3 kW Nedpfx Abehpmawj Ujlg Noise level: 78 dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Weight: 178 kg

Condition: reconditioned (used), machine/vehicle number: 2433345525, functionality: fully functional, Suction nozzle, 125 mm Nominal volume flow rate 884 m³/h Motor power 2.2 kW, 16 A Mobile Weight approx. 194 kg L x W x H: 1000 x 840 x 1650 mm Container size 730 x 660 mm Nsdpfxsiw D U Ne Ab Uelg Manual vibration

Condition: new, Year of construction: 2026, CORMAK MJ45-KB4 - 1600 Panel Saw with Scoring Unit The CORMAK MJ45-KB4 - 1600 is a professional panel saw with a scoring unit, designed for precise woodworking in carpentry workshops, production facilities, and service workshops. The machine combines industrial performance with the cutting accuracy required for processing furniture boards, MDF, and plywood. Its stable construction, independent scoring blade drive, and carefully engineered guiding systems ensure repeatability and industrial-level cutting quality. Main Advantages of the Machine 1600 mm aluminium sliding table – ensures smooth movement and precise guidance of the workpiece. Independent 0.75 kW scoring motor – eliminates the risk of chipping and tearing on the underside of the material. Powerful main saw motor – 5.5 kW (9 HP) motor provides efficient cutting performance even in hard materials. Stable cast iron construction – resistant to vibrations, improving precision and operational safety. Telescopic support arm with ruler and two stops – enables accurate positioning of the workpiece. Cutting width up to 1250 mm – ideal for formatting large panels. Ergonomic blade height and angle adjustment knobs – allow quick and tool-free setup. Construction and Technology The MJ45-KB4 - 1600 is built on a heavy cast iron body, providing high resistance to twisting and maintaining stable geometry throughout years of operation. The cutting unit operates inside a rigid housing, which reduces vibrations and increases blade durability. The sliding table guidance system is based on hardened steel rods and precision linear bearings, ensuring smooth movement and eliminating play during cutting. The machine is also equipped with a roller support table, making it easier to handle large-format materials. Precision and Work Efficiency Thanks to high blade speeds of up to 6000 rpm and a precise guiding system, the MJ45-KB4 panel saw provides perfectly straight and clean cutting edges, even when processing layered boards. The scoring blade, rotating at 8000 rpm, effectively eliminates laminate chipping and tearing. The adjustable cutting angle range of 0–45° allows complex formatting operations to be carried out with full control and accuracy. Applications The MJ45-KB4 - 1600 panel saw with scoring unit is designed for intensive use in: woodworking workshops, furniture manufacturing plants, prototype departments, architectural and model-making studios. It is ideal for processing: MDF boards, HDF boards, OSB panels, plywood, laminates, solid wood. The machine design enables quick setup changes and efficient production of both short series and individual projects without compromising quality. Standard Equipment 1600 mm aluminium sliding table Independently driven 0.75 kW scoring unit Telescopic support arm with ruler and two stops Roller support table Folding parallel fence Telescopic rip fence Adjustment knobs for blade angle and height Technical Specifications Parameter Value Sliding table length 1600 mm Cutting width 1250 mm Nljdpfxotz Srle Ab Uog Saw blade tilt range 0–45° Cutting height at 90° 80 mm Cutting height at 45° 56 mm Maximum main blade diameter 315 mm Maximum scoring blade diameter 125 mm Main saw speed 4000 / 6000 rpm Scoring blade speed 8000 rpm Main motor power (S1/S6) 5.5 kW / 9 HP Scoring motor power (S1/S6) 0.75 kW / 1.2 HP Machine weight 460 kg

Condition: new, HOLZKRAFT sc 2c sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Speeds: 4,000 rpm, Nlodpju R Sy Nefx Ab Ujg max. saw blade Ø: 315 mm, Cutting width with rip fence: 900 mm, Cutting height 90/45°: 100 / 79 mm, cutting length: 1,600 mm, Swivel range: 90 - 45 °, Dimensions (LxW): 1,020 x 325 mm, Weight: 295 kg - new exhibition machine -

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 7,458 h, load capacity: 1,600 kg, lifting height: 3,822 mm, fuel type: electric, mast type: simplex, construction height: 2,380 mm, fork length: 1,150 mm, empty load weight: 1,222 kg, drive type: Elektro, High lift truck Mast type: Standard Technical condition: normal Front tires Type: Bandages Front tires Condition: 40 - 60% Rear tires Type: Bandages Rear tires Condition: 60 - 80% Battery Volt: 24V Battery Ah: 250Ah Battery manufacturer: IBH Battery year of construction: 2019 Battery condition: 60 - 80% Nsdpfsukrhlox Ab Uslg Description: The device may be partially painted, workshop and UVV tested. Prices for this are available on request.

Condition: new, Year of construction: 2026, CORMAK MJ45-KB4 - 2000 Panel Saw with Scoring Unit The CORMAK MJ45-KB4 - 2000 is a professional panel saw with a scoring unit, designed for precise woodworking in professional woodworking shops, production facilities, and service workshops. The machine combines industrial-level performance with the cutting accuracy required for processing furniture boards, MDF, and plywood. Its stable construction, independent scoring blade drive, and carefully engineered guiding systems ensure repeatability and cutting quality at an industrial level. Main Advantages of the Machine Nlodpfetz Sm Aex Ab Ueg 2000 mm aluminium sliding table – ensures smooth movement and precise material guidance. Independent 0.75 kW scoring motor – eliminates chipping and tearing on the underside of the material. Powerful main saw motor – 5.5 kW (9 HP) motor provides efficient cutting performance in hard materials. Stable cast iron construction – resistant to vibrations, improving precision and operator safety. Telescopic support arm with ruler and two stops – enables accurate positioning of the workpiece. Cutting width up to 1250 mm – ideal for formatting large panels. Ergonomic adjustment knobs for blade angle and height – allow fast tool-free setup. Construction and Technology The MJ45-KB4 - 2000 is based on a heavy cast iron body, providing excellent resistance to twisting and maintaining stable geometry throughout years of operation. The cutting unit operates inside a rigid housing, which reduces vibrations and increases blade durability. The sliding table guidance system is based on hardened steel rods and precision linear bearings, ensuring smooth movement and eliminating play during cutting. The machine is also equipped with a roller support table, making it easier to handle large-format materials. Precision and Work Efficiency Thanks to high blade speeds of up to 6000 rpm and a precise guiding system, the MJ45-KB4 panel saw provides perfectly straight and clean cutting edges, even when processing layered panels. The scoring blade, rotating at 8000 rpm, effectively eliminates laminate chipping and tearing. The adjustable cutting angle range of 0–45° allows the operator to perform complex formatting operations with full control. Applications The MJ45-KB4 - 2000 panel saw with scoring unit is designed for intensive use in: woodworking workshops, furniture manufacturing plants, prototype production departments, architectural and model-making studios. It is ideal for processing: MDF boards, HDF boards, OSB panels, plywood, laminates, solid wood. The machine design allows quick setup changes and efficient production of both short series and individual projects without compromising quality. Standard Equipment 2000 mm aluminium sliding table Independently driven 0.75 kW scoring unit Telescopic support arm with ruler and two stops Roller support table Folding parallel fence Telescopic rip fence Adjustment knobs for blade angle and height Technical Specifications Parameter Value Sliding table length 2000 mm Cutting width 1250 mm Saw blade tilt range 0–45° Maximum cutting height at 90° 80 mm Maximum cutting height at 45° 56 mm Maximum main blade diameter 315 mm Maximum scoring blade diameter 125 mm Main saw speed 4000 / 6000 rpm Scoring blade speed 8000 rpm Main motor power S1/S6 5.5 kW / 9 HP Scoring motor power S1/S6 0.75 kW / 1.2 HP Weight 460 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 815x740x1140 mm Weight 232 kg Nodpsvz H Dajfx Ab Uolg Total power requirement 4,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1860x2700x1450 mm Weight 350 kg Njdpfx Absvz Hahs Ujlg Total power requirement 5 kw

Condition: new, length 1500 x 740 x 780 innen mm weight of the machine ca. ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Nlodpfx Aexab Iysb Uog Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros