Gluing presse

WINTER VP-3000

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Dsdsiidm Nepfx Ai Sjku Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: excellent (used), MAWEG Gluing Press Machine frame inclined at 10 degrees Single-sided loading Dkodpfjyyn E Uex Ai Sju Horizontal beam with manually adjustable height via hand crank (all clamping cylinders can be adjusted together) Hydraulic cylinders with quick clamping function, infinitely adjustable Manual hydraulic cylinder clamping Pressing force per hydraulic cylinder approx. 2000 kp Hydraulic cylinder stroke 100 mm Clamping depth 100 mm Maximum clamping length: 2800 mm Maximum clamping height: 1800 mm 4 vertical pressing cylinders 2 horizontal pressing cylinders 6 counter-stops Note on used machines: • Errors in technical specifications and prior sale excepted. • Prices quoted are ex-location and are pick-up prices – loading included! • The machines have been cleaned and function tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: reconditioned (used), Working width 3500 mm Working height 2550 mm Number of cylinders 6 St. loading dimensions L x W x H 4500x950x2900 mm Hess Speedy frame press ----- will be checked Insertion dimension / pressing length max. 3,500 mm Insertion dimension / pressing height max. 2,550 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 3 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Dkjdpfjxnqw Tex Ai Seu Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V 3 pendulum pressure plates for studio windows 1 pendulum pressure plate for pointed windows 1 extension for pendulum pressure plate 1 small parts allowance Image and video not original, show identical model ----- Price of the above mentioned machine, upon request! ----- For your information: One image shows homemade counterprofiles. This image is for illustrative purposes only. The counterprofiles are not included with this frame press. ----- (technical data according to the manufacturer - no guarantee!)

Condition: new, Year of construction: 2025, functionality: fully functional, ACTION M frame press Press for any kind of window system: windows, slatted shutters, shutters and solid wood doors. Max working dimensions L x H 3500x2500 mm Min working dimensions L x H 250x375 mm Dkodewh T Dljpfx Ai Seu Max vertical/horizontal thrust 7,4/2 ton Working height 480/1050 mm Hydraulic pump power 2.1 kW MACHINE COMPOSITION: ACTION M ACTION M FRAME PRESS num 1 109831 Normative CE per SM 1 R00494 action m 35-25 1 930731 Volt 400 EU 1 931201 Frequency 50 Hz 1 530074 PVC-coated beams working surfaces 1 530075 Intermediate manual crossbeam complete of piston and counter-stop 1 530076 Hydraulic system for low pressure working 1 530077 Equipment for trapezoidal products with oscillating head to adapt to the different corners of the windows system 1

Condition: excellent (used), Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 40/50 mm Weinig Unicontrol 6 ----- Machine will be checked in our factory before delivery! Technical Data Summary (Please inquire about any additional accessories included) Item 1: Cut-off saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide light for identifying the saw cut CNC-controlled length stop ----- > Length: 3,600 mm > Electronic length stop including positioned cut-off saw Item 2: Tenoning spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (Stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3000 rpm > Maximum tool swing diameter: 320 mm > Spindle diameter: 50 mm > Maximum tool diameter: 360 mm > Motor power: 11 kW Item 3: 1. Profiling spindle (co-rotation and conventional) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 7.5 kW Item 4: 2. Profiling spindle ----- > Position: Vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g., glass-dividing muntins) Munch guide consisting of: Munch support strip from above in the area of ??the vertical right-han d profile milling unit and profiling spindle. Item 5: Horizontal top profile milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Spindle speed: 5,850 rpm > Maximum tool swing diameter: 130 mm > Axial travel: 52 mm, indexed in 2 positions > Radial travel: 125 mm, indexed in 2 positions Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: Vertical right > Tool clamping length: 160 mm > Axial travel: 90 mm, indexed in 3 positions > Radial travel: 100 mm, indexed in 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Maximum tool swing diameter: 210 mm > Motor power: 3.0 kW Further features ----- > Electric feed height adjustment including mechanical digital display and manual feed bar clamping Dsdpfxoxtvgke Ai Sjku > Rebating device for tear-out-free rebating > Double part package > Return conveyor for 1-person operation: swivel conveyor > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction nozzle diameter: ----- Crosscut saw 80 mm Tenoning spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Grooving device from above 80 mm Hardware spindle 120 mm -----...

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Dkjdpfxsvvkmbs Ai Sou Storage location: Nattheim

Condition: excellent (used), Tenoning and Slotting Machine WEINIG Type 51 Pivoting studio window device with digital angle display Rolling table with automatic feed rate of 6 m/min. Rolling table length approx. 2,100 mm Pneumatic workpiece clamping Dsdpfx Aisv Tb Hge Soku Automatic countershaft change Crosscut saw Pneumatically timed 4-station turret Motor approx. 3 kW / 380/400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380/400 V / 50 Hz Spindle speed 3,000 rpm Tool diameter max. 320 mm Length stop system Machine including operating tools Installation dimensions L x W approx. = 2700 x 2800 mm Weight approx. 2000 kg Note on used machines: • Errors in technical specifications and prior sale excepted. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and function-tested. • All machines are sold as seen without any warranty claims. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: good (used), Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -Dufix: Nr/Var 46616 -Socket: Ø 50 mm -Weight: 6.8 kg Dkjdpfsb A Np Njx Ai Seu

Condition: new, Year of construction: 2025, Mini Crane on a crawler chassis TB5000 JiB BEFARD TB 5000.JIB is an alternative to the basic version of TB 5000, thanks to the JIB arm it is more mobile and allows work in hard-to-reach places. TB 5000.JIB is equipped with an active arm, two hydraulic extensions of the main arm and two hydraulic extensions of the JIB. Standard features: * radio control of the device - driving, working, spreading the feet * double power supply of the crane - combustion and electric 230 V * anti-overload system as standard * maximum horizontal reach over 11 m * four hydraulic extensions + 1 manual extension Dsdpfxev I T T Io Ai Soku * maximum vertical reach over 13 m * 4 hydraulically lowered supports * weight approx. 2200 kg * height approx. 195 cm * width approx. 88 cm * active arm Additional, optional equipment: * hydraulic winch 990 kg * Li-ion battery power supply * pads for support feet Available in the selected color.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 2788, Cut-off saw, diameter 300 mm Dsdoiau I Sjpfx Ai Ssku Milling spindle, diameter 40 mm Sliding table with Festo length stop Dust extraction port for saw, 120 mm Dust extraction port for milling machine, 140 mm Cable + plug, 16 amps Without operating tools Unfortunately, we cannot respond to inquiries that do not include complete contact information.