Clamping table

WMW 360 x 660 mm

Condition: used, 3D Coordinate Measuring Machine ZEISS NUMEREX - Not Functional Granite Measuring Table, Granite Surface Plate, Measuring Table Djdpfjfy U Ewox Addowf Model No. 3648-18, Serial No. X-1019, Year of Manufacture approx. 1986 Measuring Range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring Plate L x W 1525 x 1435 mm Usable Surface 1525 x 1100 mm Plate Thickness 305 mm Clearance Width in the Portal 1100 mm Probe Mount Ø 9.5 mm Compressed Air Connection 6 bar Power Supply 230 Volt, 50 Hz - Granite plate with steel inserts with internal threads - Axis adjustment with pneumatic slide guide for X, Y, and Z axis - Plate mounted on base frame with 5 leveling feet, 3 support plates for the feet - Computer and software missing (not available and not included) → not functional! Space required for the measuring machine L x W x H 1600 x 1850 x 2200 mm Machine weight approx. 2.8 tons Plate is damaged on one side – see photo, otherwise in good condition

Condition: excellent (used), Year of construction: 2010, Material Testing Machine: ZwickRoell GmbH mod.Z005 TN Designed to perform standard tests on materials and components, allowing for precise measurements of strength, flexibility, and other material properties, which are crucial in engineering and material research. With advanced technology and intuitive software, these machines offer efficient and safe operation. The device includes accessories for measuring material tensile strength, compression, and bending. Technical Specifications: • Year of production: 2010 • Maximum load (Fmax): 5 kN • Test dimensions: - Height (without accessories): 1070 mm - Stroke height: 1000 mm • Frame dimensions: - Height: 1340 ... 1345 mm - Width: 770 mm - Depth: 439 mm Dwsdpsuna Iusfx Addsf • Weight: approximately 110 kg • Power supply: 230 V, 1Ph/N/PE, power consumption about 800VA The machine allows for the testing of various materials and components, including: • Construction materials: concrete, steel, wood • Plastics: flexibility, tensile strength • Metals: strength, hardness, and fatigue testing • Mechanical components: compression, bending, and tensile tests • Samples in various forms: thin-layered, block-shaped, tubular Thanks to the system's flexibility, tests can be adapted to specific requirements. TAG: Laboratory Equipment, Material Testing, EPS Styrofoam, Polystyrene Production, Mechanical Testing, Thermal Conductivity, Material Properties, Construction Materials, Quality Control, Engineering Research

Condition: new, - profile width max. (mm): 90 Djdpfxjfiqhbo Addswf - profile height max. (mm): 80 - saw blade diameter (mm): 350 - saw blade bore (mm): 30 - motors: 2 each 1,5 kW - suction connections: 2 each Ø 80 mm - Pressure (bar): 6 - 7 - weight (kg): 300 - Cutting of mouldings: for wood, plastic and aluminum frames - Saw blades: 2 fixed at 45°. - Pneumatic aggregate stroke: with two-hand operation - Adjustable stroke speed - Pneumatic lamella clamping: in machine cycle - Automatic lamella adjustment: to profile shape - Diagram plates (mm): 700 long on the right and left side - Pneumatic length stop - Motor protection switch - Motor brakes - Tool kit - maintenance unit - Pressure switch Machine features - Easy handling - Quickly executed work cycle - Low maintenance and cleaning effort

Year of construction: 2007, condition: used, max. wheel diameter 400 mm gear width - mm max. module - workpiece dia. 36-300/400 mm axis distance 135-290 mm Djdpfxogr Hare Addjwf spindle turning speed - stepless 3000 1/min dist. between centers 100-550 mm Control weight of the machine ca. 4000 kg dimensions of the machine ca. 2000x3055x2788 mm Test method: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli testing in two-flank contact. Features: - Use of up to 6 test slides - Highest testing accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron)

Year of construction: 1990, condition: good (used), CNC-4th axis NIKKEN type: CNC-200 year 1990 with counterholder and base plate. Dwsdegabu Uopfx Addsf

Condition: not inspected (used), Working length max. 400 mm Working width max. 150 mm Dwodpsk Tyrwjfx Addof Wood thickness max. 25 mm Hydraulic motor 2,2 kW 2 milling motors à 2,2 kW Spindle speed 12.000 rpm. Frequency converter 8 kVA, 200 Hz Weight ab. 1200 kg

Condition: new, Year of construction: 2024, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Dsdpogwt S Tefx Addswf Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm Hxdcvds7y • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" Dodpfx Adjdt Rgvsdewf VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: new, The Turnado 280/2000 is a remarkable example of the Conventional Horizontal Lathes category, showcasing the best features of the Engine Lathes group. This KNUTH machine combines a robust construction with a powerful motor to offer a high level of versatility designed to meet various production requirements. Proven over 20 years in the market, the Turnado series is adaptable due to its extensive standard equipment, including a quick-change toolholder system, three and four-jaw chucks, and a 3-axis position indicator that maximizes precision in machining tasks. With a heavy cast iron bed that supports large workpieces and a user-friendly control panel, operators can easily handle complex machining processes, ensuring efficiency and safety. You will appreciate the automatic feed shut-off for repetitive tasks, along with features like a coolant system and protective shield. For reliable performance and outstanding quality, particularly in demanding applications, you can request a quote for the Turnado 280/2000 today, and experience the excellence of KNUTH's Conventional Horizontal Lathes and Engine Lathes. Dsdpfsuzk S Eex Addswf

Condition: new, The SBF 40 TV 1000 is a versatile machine tool in the Conventional Vertical Milling Machines category, belonging to the Mill Drills group. This robust drilling and milling machine excels with a powerful drive and a wide speed range, making it an ideal choice for working with steel and non-ferrous metals. Notably, its large compound sliding table features an automatic infinitely variable feed on the X-axis, allowing for precise coordinate drilling and light milling. Equipped with an oil-bath lubrication system, the quiet operation enhances tool life and durability, while the high-quality spindle bearing supports higher loads over extended periods. The head can swivel for diverse applications, and it includes convenient features like controllable automatic feed, adjustable table guides, and a built-in coolant system. With the SBF 40 TV 1000, you can enhance your machining capabilities at an unbeatable price. Request a quote today to get started with this impressive milling solution from KNUTH! Dwsdsuyibcjpfx Addof