Double Column Milling M/C - Gantry Type

....... .......

Condition: used, Type : Stirrer / Dissolver Wall support: manual Previous use: paint Stirring mechanism: dispersing tool Stirring head diameter: 200 mm Stirring shaft length: 950 mm Codex R Ayhopfx Abxerf Up/down travel: 950 mm

Condition: excellent (used), Year of construction: 1986, RAFAMET type KCF 400 Morę information on request Cedpfx Abjytq T Hexsrf

Condition: used, Year of construction: 2005, Manufacturer: unknown Volume: 600 L Jacketed : Yes Agitation: yes Codsx R Axkepfx Abxerf Motor : Stober Power : 0,25 KW Year : 2005

Year of construction: 2009, condition: used, Year : 2009 Crjdpoykb U Nsfx Abxsf Type: Vibrating sieve Material : stainless steel Engine reference: Elettromeccanica Tarcisio Pugni PVF-F 200 Motor power: 1.1 kW / 1500 rpm Nominal sieve diameter: 900 mm Système de décolmatage : billes Machine dimensions: 110 x 130 x 120 cm Plan for replacement of the grid: this item may be subject to a separate quotation.  

Condition: used, TECHNICAL DETAILS - maxi module to be cut : 1.5 [mm] - maxi diameter to be cut: 70 [mm] - maxi length to be cut: 100 [mm] - part maxi length: 200 [mm] - number of tooth mini to be cut: 3 - number of endless screw threads (special accessories): 1 Cjdpfjuhbplox Abxorf - helix angle: 0-90[°] - milling tool maxi diameter: 50 [mm] - 11 milling tool normal speeds - speed normal machine: 226 – 2100 [rpm] - power: 1.5 [kW] - net weight: 1035 [kg]. EQUIPMENT - with part loader

Condition: used, Dimensions 150 x 160 x 200 cm. Crsdpfxozg Naqs Abxsf Main outlet diameter 10 cm. 2 valves front and back for draining.

Condition: reconditioned (used), A completely refurbished infeed for Resaw in excellent condition Crsdpohpyakofx Abxef

Condition: used, Radial drilling machine CSEPEL, Type RFh 75 / 1500 Machine no. 13704, Year of manufacture 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle mount: MK 5 Nominal overhang: 1500 mm Maximum overhang of the spindle: 1500 mm (to the column) Minimum overhang of the spindle: 440 mm (to the column) Credpfx Aelhwr Rjbxef Distance from spindle nose to clamping surface: 370 - 1700 mm Overarm vertical adjustment: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed rate: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Mains connection: 380 Volts, 50 Hz, 15 kW - Right-hand and left-hand rotation of the drilling spindle via hand lever switch - Hydraulic gear change for spindle speed and feed rate - Hydro-mechanical central clamping device - Motorized overarm vertical adjustment - Without coolant system - Machine light - Operating manual Space required: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons Good condition

Condition: used, details on request Cededgxnyjpfx Abxerf

Condition: used, Grinding quills: 16 - 40 mm Cedediuirepfx Abxerf

Condition: not inspected (used), Year of construction: 1996, turning diameter over cross slide: 1,000 mm, turning length: 4,000 mm, turning diameter: 1,450 mm, spindle bore: 150 mm, rotational speed (max.): 560 rpm, overall weight: 20,000 kg, CNC NUM T Plus Capacity 4000 x 1450 mm on bed 1000 mm on cross-slide 4-jaw chuck 1200 mm Steady rest Csdpfx Aeyzhrkebxjrf Automatic turret Set of tool holders Weight 20,000 kg

Condition: repair required (used), functionality: unexamined, conveyor belt length: 8,100 mm, conveyor belt width: 300 mm, total length: 8,200 mm, Used conveyor belt, approximately 8 m in length, belt width 30 cm, drive via gear. Codozcunmspfx Abxerf

Condition: used, Type: Three-roll mill Roll width: 150 mm Roll diameter: 75 mm Number of rolls: 3 Safety sensor Control panel Csdjy Abb Ispfx Abxsrf    

Condition: ready for operation (used), Table diameter: 2250mm Max. swing diameter: 2500mm Crjdpfjyxb I Tjx Abxef Max. workpiece height: 1600mm

Condition: used, overall weight: 10,000 kg, power: 55 kW (74.78 HP), Electro-Hydraulic orange peel grab, 6tines, weight 10000kg, about 6m3, with radiation meter Codpjy Ia H Tefx Abxjrf