Used horizontal band saws - half-automatic - cutting range 0-300mm for sale (114)

Condition: used, Year of construction: 1991, Technical details: cutting diameter: 240 mm Rodpfx Aou Nihujbhew saw band length: 3000 mm saw band width: 20 x 0,8 mm cutting range 90 degrees: round: 240 mm band speed: 20; 35; 50; 70 m/min total power requirement: 1,8 kW machine weight approx.: 330 kg dimension machine xH: 1,9 x 1,1 x 1,1 m hydraulic operation clamping jaw size 150 x 100mm, manual clamping (hand wheel) 1 transport roller each before and after vice support incl. 4 pieces band saw blades incl. 2 pieces roller tables (2000 x 520 x 750mm and 1000 x 520 x 750mm) incl. limit 3000mm *

Condition: reconditioned (used), Year of construction: 2015, Used automatic hydraulic band saw for metal MEP Shark 230 nc hs 5.0 Automatic auger chip remover Blade size: 2950x27x0.9 Choice of cutting speed with inverterr: from 15-100 m/min Redpfx Aotva Nhjbhsw Capacity: round 230mm, square 230x230mm Year: 2015 Possibility of cuts also in semi-automatic mode The machine has been fully serviced, the following parts have been replaced: all bearings, reducers, both wheels (pulleys) leaf, hard metal plates in guides, main shaft, coolant pump, two jaws, coolant pipes,yojstick, fans and other consumables.

Condition: excellent (used), Year of construction: 2006, Specifications Brand: MEP Model: Shark 282 SXI EVO Type: Semi-automatic bandsaw Year of manufacture: 2006 Country of origin: Italy Connection voltage: 400 Volt Motor power: 1.5 / 1.8 kW Cutting capacity, round, at 0°: Ø 250 mm Cutting capacity, rectangular, at 0°: 280 x 220 mm Mitre angle range: 45° to the right, 60° to the left Bandsaw speeds: 36 / 72 m/min Bandsaw blade dimensions: 2950 x 27 x 0.9 mm Material clamping: Hydraulic Cooling system: Yes Misting system: Yes Roller conveyor: Yes Dimensions Length: 1970 mm Width: 1150 mm Height: 2000 mm Rjdpfxjzd Txxo Abhew Weight: Approx. 500 kg Roller conveyor, left & right: approx. 4 meters

Condition: new, Year of construction: 2023, ! Machine offer for customers in Lithuania / Latvia / Estonia. The new high-performance automatic bandsawing machines of the HBE Dynamic series, provide performance, ease of use and energy efficiency. You can rely on accurate and fast cuts in easy to difficult to cut materials, in solids, tubes and profiles. The rigid, low-vibration saw frame in cast iron construction and the linear guide system in portal design ensure the best cutting results and maximum blade service life. By the standard servo-downfeed system with BEHRINGER cutting pressure control, the HBE Dynamic series provides short idle times and a precise saw feed movement. The standard cutting pressure control prevents overloading of the saw blade and increases the lifetime significantly. It therefore offers the best conditions for a dynamic, tool gentle sawing. Available models: Rodpfx Ajiy Rc Rsbhew - HBE261A - HBE321A - HBE411A - HBE511A

Condition: used, Year of construction: 2013, functionality: limited functionality, cutting height (max.): 230 mm, cutting width (max.): 245 mm, total height: 1,680 mm, total width: 1,950 mm, overall weight: 1,000 kg, empty load weight: 1,000 kg, feed length Y-axis: 500 mm, saw band length: 2,950 mm, saw band width: 27 mm, section length (max.): 9,999 mm, space requirement height: 2,100 mm, space requirement length: 2,900 mm, space requirement width: 1,950 mm, table length: 2,800 mm, table width: 245 mm, working height: 890 mm, Further technical details can be found in the operation and maintenance manual, which will be provided upon sale. If you have any further questions, please feel free to contact us by phone or email. Redpfx Aox Dirzsbhew Best regards, Weber Geländersysteme

Condition: used, Year of construction: 2015, machine/vehicle number: 23811.15, functionality: fully functional, The machine is used but operational. It has been in our metalworking shop since 2015 and is being sold due to the closure of the company. We are selling the saw with two stops. Rsdpfsy Eg Ifox Abhjw

Condition: new, – Semi-automatic Rodpfxsh Razfo Abhow – Hydraulic – 2 speeds – Double miter – Hydraulically adjustable saw pressure – Cooling – Saw blade 2730 x 27 x 0.9 mm – Foot pedal control – Emergency stop – Documentation – 400 V

Condition: new, Bandsaw machine Manufacturer: OPTIMUM Model: S 275 NV Item No.: 3300265 Condition: New machine Redpfx Abedynpcjhew Cutting capacity (round): 225 mm Cutting speed: 20 - 90 m/min Standard equipment includes: - Horizontal clamping device - Length stop - Automatic shut-off after the end of the cut - Chip removal brush - Coolant system - Operating manual

Year of construction: 2020, condition: as good as new (ex-display), Bandsaw machine Manufacturer: KASTO Model: micut P 2.6 Year of manufacture: 2020 - Demonstration machine Machine no.: 6151 101 006 With warranty Standard equipment includes: - Stepless cutting speed 20 - 110 m/min - Horizontal clamping device, manual tensioning - Stepless miter adjustment (-45° to +60°) - Stepless saw blade arm adjustment - Adjustable saw feed via self-weight - Cutting guide as material support Rjdpfx Absdur E Aehew - Automatic shutdown after cut completion - Coolant system - Operating manual With the following options: - Drip oiler

Condition: new, Bandsaw machine Manufacturer: METALLKRAFT Redoilg Hdepfx Abhjw Model: BMBS 300 x 320 HA-DG Art. No.: 3690041 Condition: New machine Cutting range (round): 300 mm Band speed: 20-100 m/min, infinitely variable Standard equipment includes: - Fully hydraulic, semi-automatic version After starting, the machine automatically tensions the blade, after the cut is complete, it returns to the starting position, stops the saw blade, and opens the clamping device. - Cutting sensor for automatic detection of material height - Horizontal clamping device, mechanical, hydraulic - Monitoring of saw blade tension, electromechanical - Chip removal brush - Measuring stop with a scale of 1,000 mm - Coolant system - Operating manual

Condition: new, Year of construction: 2026, machine/vehicle number: M-Y 270, functionality: fully functional, operating hours: 818 h, power: 380 kW (516.66 HP), cutting height (max.): 270 mm, cutting width (max.): 270 mm, total height: 900 mm, total length: 1,650 mm, total width: 810 mm, overall weight: 550 kg, table height: 1,500 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Çeyrek yüzyılı aşkın deneyimle, testere endüstrisinde kalite, dayanıklılık ve güvenilirliğin simgesi haline geldik. 25 yıllık uygulamalı uzmanlık ve derin sektör bilgisiyle desteklenen bir şekilde, sadece ürünler sunmakla kalmıyoruz — müşterilerimize uzun ömürlü çözümler sunuyoruz. Her bir ürünümüz yüksek performans, hassas kesim ve maksimum verimlilik için tasarlanmıştır. En zorlu koşullarda bile, testere çözümlerimiz kalitesini koruyor ve profesyonellerin ilk tercihi haline geliyor. Rsdpfoy Akggox Abhjw Gelişen teknolojilere uyum sağlayarak, üretim standartlarımızdan asla ödün vermeden kendimizi sürekli geliştiriyoruz. Çünkü güçlü sonuçların doğru araçlarla başladığına inanıyoruz. Gücümüz deneyimden, keskinliğimiz ise zanaatımıza olan tutkumuzdan gelir.

Condition: excellent (used), Year of construction: 2011, Details Manufacturer: Berg & Schmid. Model: GBS250 Super AutoCut. Year of manufacture: 2011. Condition: in excellent working order. Rodpey U Dyksfx Abhjw Cutting capacity Round materials (90°): Ø 250 mm Square materials (90°): 230 x 230 mm Round materials (45°): ± 210–220 mm Round materials (60°): ± 160–170 mm Saw blade length: ± 3,000 mm Saw blade width: 27 mm Saw blade thickness: 0.9 mm Mitre angle & position Left mitre angle: 0–60° Right mitre angle: 0–45° Hydraulic saw arm with adjustable cutting pressure Dimensions Length: approx. 1500 mm. Width: approx. 1700 mm. Height: approx. 1800 mm. Weight: approx. 500 kg.

Condition: as good as new (ex-display), Year of construction: 2024, type of input current: DC, cutting height (max.): 285 mm, cutting range round steel at 45°: 230 mm, cutting range round steel at 90°: 250 mm, saw band length: 2,950 mm, saw band width: 27 mm, Title MEP SHARK 282 CCS [with semi-automatic lowering] Article number SH282CCS Motor power 1.5/1.8 kW Belt opening 285 mm Belt dimensions 2950x27x0.9 mm Weight 440 kg Rsdpfxey T N I Rs Abhow Speed 36/72 m/min. Cutting surface 0° 250 / 220x220 / 280x220 Cutting surface 45° right 230 / 200x200 / 220x200 Cutting surface 45° left 200 / 170x170 / 200x140 Cutting surface 60° right 120 / 80x80 / 140x80 Cutting surface 60° left Description MEP sawing machine: Basic equipment: Vice with quick adjustment and adjustable guide rails Hydraulic band clamping device with clamping pressure indicator Underframe with removable coolant tray Chip clearing brush Adjusted precision stops for cuts of 0°, 45° and 60° left and 45° right Length stop for cuts of the same length Material support arm, simultaneous connection option for roller conveyor/loading side Turntable for double mitre cuts Machine is designed for pallet truck/forklift transport M2 bi-metal band saw blade for solid and profiled material Tools and operating instructions Electrical equipment: Control panel labeled cable connections Control lamp for operational readiness Main safety switch Emergency stop button Speed changeover switch Thermomagnetic protection Undervoltage release Control handle IP 55 protected Phase comparator Low voltage system 24 Volt Electrical coolant system 48 V (attachment of a micro-spraying device possible) Motor 1.5/1.8 KW 2 speeds 36/72 m/min. Vice opening 285 Saw band 2950 x 27 x 0.9 Weight 440 kg

Condition: used, Year of construction: 2008, machine/vehicle number: 08063895, power: 0.75 kW (1.02 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, KNUTH B180 Rsdpfx Abey R T R Rjhew For sale is a robust and reliable miter band saw for metalworking. Technical data: Cutting capacities: * 90° rectangular: 180 × 290 mm * 90° round: 180 mm * 45° rectangular: 100 × 120 mm * 45° round: 100 mm Band speeds: * 22 / 33 / 45 / 65 m/min Drive: * Main drive motor power: 0.75 kW * Supply voltage: 400 V Dimensions & weight: * Blade dimensions: 2360 × 20 × 0.9 mm * Machine dimensions: 1244 × 457 × 1580 mm * Weight: approx. 105 kg Features & advantages: * Precise miter cuts * Robust and stable construction * Multiple adjustable blade speeds * Ideal for steel, stainless steel, and other metals * Suitable for workshops and professional applications Condition: used / fully functional Inspection and test run possible by appointment If interested, please get in touch.

Condition: reconditioned (used), Used semi-automatic bandsaw MEP Shark 281 sxi evo Three operating modes: semi-automatic, manual, and manual dynamic (gravity) Blade dimensions: 2950 x 27 x 0.9 mm Two blade speeds: 36/72 m/min Rodpfx Aeyyn Suebhsw Max vice opening: 285 mm Cutting capacity: at 0° round 250 mm, rectangle 280x200 mm at 45° round 190 mm, rectangle 180x180 mm at 60° round 120 mm, rectangle 110x110 mm Year: 2006 Weight: 435 kg Fully serviced.

Condition: good (used), Year of construction: 2004, Bandsaw in good condition + 2 extra new bandsaw blades. Rodpfx Ajy Txb Tjbhsw

Condition: excellent (used), BEKA MAK BANDSAW MODEL BMSY 440 DGH DOUBLE SWIVEL SEMI AUTO HYD VICE / CLAMPING DIGITAL DISPLAY FOR ANGLE Cutting Capacity -60° 320 mm 285 x 440 mm 285 mm -45° 410 mm 410 x 440 mm 410 mm -30° 440 mm 500 x 440 mm 440 mm +60° 320 mm 250 x 440 mm 250 mm +45° 410 mm 410 x 440 mm 410 mm +30° 440 mm 500 x 440 mm 440 mm 0° 440 mm 610 x 440 mm 440 mm Main Drive Motor 3 kW Hydraulic Motor 0,55 kW Coolant Pump 0,12 kW Blade Speed 15 - 120 m/min. Blade Dimensions 5200x34x1,1 mm Working Height 860 mm Weight 1540 kg Length 2800 mm Rodoy U Il Ropfx Abhsw Width 1210 mm Height 1870 mm

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, year of last overhaul: 2020, Equipment: CE marking, Automatic Bandsaw - Crosscut and straight cut - machine was refurbished in 2020 and is in excellent condition - nice and simple to use - built to last, made in Italy. Rodpey S Dbpofx Abhjw

Condition: ready for operation (used), Bewo Mod 270 Semi-automatic Hydraulic Bandsaw Metal Saw #2050230 Maximum clamping: 210x210mm Dimensions: 130cm x 80cm x 140cm (LxWxH) 380v Variable cutting speed With coolant pump With extra saw blade Redpfx Aoylppwsbhsw Video available on our YouTube channel. Location: Budel, Netherlands Transport available at additional cost Call or email for more information Also check out our other listings We are looking for industrial machines all year round. If you have surplus machines, send us an email with photos and information. The seller is not liable for typographical or data transmission errors. The machine's appearance, technical condition and wear are in line with its age; used machines are sold without warranty. The displayed price is exclusive of VAT (unless otherwise stated).

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Rsdpfoul Svlsx Abhow Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg The machine is fully refurbished and tested.

Condition: new, Year of construction: 2024, neu 2024 6254 prompt, Zwischenverkauf v Italien 15040 € 288.77 € 1 Doppelsäulenführung 3270x27x0,9 mm 40/80 m/min 300 mm 300 mm 350x260 mm rund 210 mm, quadrat 210 rund 110 mm, quadrat 110 830 mm 1.5 kW 1500 mm 1600 mm 1900 mm 590 kg hydraulicvice INCL. ADJUSTABLE CLAMPING PRESSURE saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking; Quick bow pull-down hydraulically operated; Blade rotation and cooling liquid start-up; Working pull-down; end of the cutting cycle; Stop of blade rotation and supply of cooling liquid; Quick bow lift-up; Stop of bow upwards movement; vice unlocking if selected. Manufacturer warranty until 31.12.2026 OPTIONS: Rsdewiqndepfx Abhew Roller tables and band saw blades on request

Condition: good (used), Year of construction: 1985, range L-W-H 400x300x200 mm saw diameter 420 mm weight of the machine ca. 3500 kg Producer: KASTO Type: HBA 420U Year of manufacture: 1985 Rjdpfxsvf N Sus Abhew Dimensions (width x height x depth): approx. 400x200x300 cm At7Zcq Fully automatic NC horizontal bandsaw 1 chip conveyor, 1 external chip conveyor, 1 person. driven roller conveyor approx. 450 cm.

Condition: good (used), Year of construction: 1995, range L-W-H 3,50/2,40/2,20 mm weight of the machine ca. 3500 kg Producer: KASTO, Type: HBA 420 AU, C93I8De Year of production: 1995 Fully automatic NC horizontal band saw with hydraulic clamping device up to 400 mm, 1 chip conveyor, 1 external chip conveyor, 1 roller conveyor, 1 roller conveyor, hydraulic drive, motor switched Redpjw N S Ecsfx Abhew off, Dimensions (width x height x depth): approx. 400x200x350 cm

Condition: excellent (used), Year of construction: 2011, input voltage: 400 V, Equipment: CE marking, Mitre Band Saw - For left mitre cuts up to 60° and right up to 45° - Cutting speed: 37 and 74 m/min. - Automatic saw frame lowering with rapid approach to the workpiece and shut-off at end of cut - Quick-release vise in T-slot, sliding for quick position change - Chip removal brush - Automatic cooling system - Machine base - Incl. 1 HSS-Biflex saw band 2765 x 27 x 0.90 mm Redpfx Ajy Id Dcobhow Cutting capacity: 90° Round Ø 255 mm Square 240 mm Rectangle 300 x 180 mm 45° Round Ø 210 mm Square 190 mm Rectangle 210 x 100 mm 60° Round Ø 135 mm Square 115 mm Rectangle 140 x 90 mm

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 11640 € 223.49 € Schwenkrahmen 3270x27x0,9 mm 35/70 m/min 300 mm 240 mm 420x200 mm rund 240 mm, quadrat 230 rund 170 mm, quadrat 170 830 mm 1650 mm 1200 mm Rsdoynm S Iopfx Abhsw 1900 mm 400 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking; Quick bow pull-down hydraulically operated; Blade rotation and cooling liquid start-up; Working pull-down; end of the cutting cycle; Stop of blade rotation and supply of cooling liquid; Quick bow lift-up; Stop of bow upwards movement; vice unlocking if selected. Optional equipmente: adjustable vice pressure EUR 330,--