Used belt grinding machines for sale (127)

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 90.0 kg range L-W-H 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - This automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for the longest service life and the best possible smoothness - Tool-free and therefore faster, uncomplicated change of the sanding belt Gedjxabtcepfx Af Aobl - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed structurally optimized - thus a burning of the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 - dust bag

Condition: new, width of the strips 150 mm band length 2000 mm revolutions per minute 3000 U/min engine output 4.0 kW weight 93.0 kg Gbsdpsxaa Swofx Af Aol including machine base High-performance grinder for standard grinding applications for extra wide workpieces. Furnishing: - High-performance belt sander with a stable machine base - Constant speed with high cutting performance thanks to the robust 4 kW motor - Very good price-performance ratio - Removable chip catcher - Patented strap tensioning system - Low vibration due to robust construction

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 90.0 kg range L-W-H 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEEL Gedpfxoxabp Ds Af Aobl The free-standing belt sander PÁSOVEC 150 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operator's body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is just one thing thanks to the lever tensioning mechanism of a few moments. further description : - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous plane grinding surface for optimal grinding of long workpieces - Universally applicable for grinding edges, surfaces and cylindrical grinding - Graphite coating on the plane grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt 150 x 2000 mm, 80 grit - Hinged protective screen - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate off button - Machine base

Condition: good (used), For sale: SAMCO wide belt sanding machine Table dimensions: 2400x800 mm electric table height adjustment right/left rotation Gjdpfxex A Tv Uj Af Aobl 2 speeds in each direction separate extraction fan

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Gbsdpfx Astmqi Dof Ael The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. Gedpfxjpugwie Af Aebl The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 650x1160x650 mm Godpfsvz Hv Asx Af Asbl Weight 125 kg Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 750x1160x550 mm Weight 85 kg Gbsdsvz Hv Nspfx Af Ael Total power requirement 2,2 kw

Condition: new, Year of construction: 2026, MBSM 150-20 For sanding surfaces, edges and rounding off Powerful motors with vibration-free running to achieve the best sanding results Working height adjustable due to infinitely variable inclination of the sanding unit Workpiece support angle adjustable Continuous flat sanding surface enables sanding of long workpieces as well One suction nozzle each at the spark box and at the rear belt roller Protective disc can be folded away Quick clamping system for changing the abrasive belt in seconds Simple adjustment of the belt run via adjusting screw Motor with brake and circuit breaker Gedpfxehk Df Dj Af Aebl Dimensions and weights Length approx. 527 mm width/depth approx. 995 mm height approx. 1025 mm Weight approx. 114 kg Suction Nominal width of external suction nozzle 60 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Noise emission Emission sound pressure level at the workplace Lp (idling without extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Sanding belt length 2000 mm Sanding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: 23 03 28 / 1, functionality: fully functional, TWIN BELT GRINDING MACHINE TYPE ZBS for manual grinding, satin finishing and polishing - equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the grinding belt clamping unit - free space within the working area by guiding the belts over an upper installed deflection unit - open and close of upper grinding belt hoods by pneumatic cylinder - accident protection by movable grinding belt cover - selectable for front and rear belt - preselection by 2 potentiometers in the control panel and frequency inverter in high-line version - with limit switch/operation by movable grinding belt cover - tension of each grinding belt by pneumatic belt tension device - the grinding belt is driven by a frequency controlled AC-motor with P = 4,0 kw - frequency converter with brake chopper unit for braking in max. 10 s - grinding belt speed v = 4 - 25 m/s - emergency-off release line in the working area - with a sliding table of aluminum-pipe installed between the machine stands - table movement back and forward by means of 4 soft prism rolls - max. workpiece weight 100 kg - motorized table height adjustment by spindles and roller guiding's until max. 780 mm - spindles drive by 2 synchronic gear motors with P = 0,75 kW, speed v = 0,5 - 1,5 m/min - machine without lower traverse to increase the clearance of movement to an effective depth of 1400 mm (lower edge grinding belt - ground) - with a temporary traverse, to remove after adjusting and bolting to the ground - pressure of the grinding belt on the workpiece to be ground by manually operated grinding pressure piece, pendulous pressure piece with locking screw, softy guiding on prism rolls - dust extraction tube on the left hand machine stand with D = 200 mm - necessary extraction power = approx. 3400 m3/h - working area to be illuminated by means of 2 LED lights, adjustable in 3 steps Gjdot Hvkvspfx Af Aebl ZBS 3 - table dimension 3000 x 1000 mm, grinding belt 100 x 9000 mm Filter included. Additional info in pdf attached.

Condition: new, Special offer price for stock goods! Only while stocks last! Price ex stock, plus VAT. Belt sander: Bernardo Type/Model: MS 75 x 2000 S-2 Condition: New belt dimensions: 75 x 2000 mm belt speed: 14,5 / 29 m/sec. contact wheel Ø x W: 200 / 80 mm surface grinding table: 460 x 75 mm suction connection Ø: 100 mm motor output power S1 100%: 2,4 / 3,0 kW Gbjdpfx Aob Hhkgef Aol motor input power S6 40%: 3,0 / 4,0 kW Voltage: 400 V Dimensions (L x W x H): 1080 x 440 x 1000 mm Weight approx.: 67 kg Original packed new product.

Condition: new, width of the strips 150 mm band length 2280 mm revolutions per minute 2880 U/min roll diameter 140 / 80 mm table-size 700 x 350 mm engine output 3.0 kW weight 250 kg range L-W-H 1300 x 800 x 1500 mm MADE IN GERMANY - Machinevideo - ?v=l-XFPai2BAA Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table Gbodexab R Ispfx Af Ajl - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sec grinding width 75 x 430 mm engine output 3.0 kW weight 75.0 kg including machine base Furnishing: - Powerful belt sander - modularly expandable, for the trade and for small series. - Can be expanded with additional modules - Speeds ideal for metalworking with 3000 / min - Height-adjustable surface grinding table for linear surface grinding - Removable chip catcher Godpfjxabaiox Af Aebl - Connection option for external suction - Working height individually adjustable - Patented strap tensioning system - Robust three-phase motor - Low vibration

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, grinding belt width: 75 mm, grinding belt length: 2,000 mm, grinding belt speed: 30,000 mm/s, total height: 1,205 mm, total length: 956 mm, total width: 581 mm, overall weight: 110 kg, grinding width: 75 mm, warranty duration: 12 months, Universal belt grinder UTBS-75 Gsdpfox N Sv Ajx Af Aobl

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Belt Grinder for Pipe and Profile Ends Demonstration machine, as new Year of manufacture: 2008 Robust belt grinding machine for pipe and profile ends on a stable base frame with a large drive motor for professional metal processing. Description Gbsdpfeydpkxex Af Asl – ideally suited for finishing pipes and profiles – for diameters from 20 to 76 mm – grinding angles from 30° to 90° – high belt speed of 30 m/sec – powerful motors – vibration-free operation for optimal results Technical Data Motor power: 3 kW Grinding range: Ø 20–76 mm Belt dimensions: 100 x 2000 mm Guide piece adjustable from 30° to 90° Speed: 2905 rpm Belt speed: 30 m/sec Dimensions: 1300 x 640 x 440 mm Weight: 168 kg Accessories (optional) Roller set (radius rollers) for pipe and profile end grinder, ø 20 – 26 – 32 – 42 – 48 – 60 – 76 mm

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, total height: 1,330 mm, total length: 670 mm, total width: 500 mm, overall weight: 97 kg, Belt grinding machine for inside and outside work on a contact wheel. The machine is designed for sandblasting and cleaning simple and shaped internal and external workpieces. Adjustable working area from -45° to +30°, extra-large working table. Gbjdpfx Afowq D N De Ael The machine supports belts 2000x6/75 mm Four interchangeable attachments with contact wheels in widths of 6 mm, 10 mm, 25 mm, and 75 mm Working table 450x450 mm No pipe attachment No documentation – no CE mark

Condition: good (used), functionality: fully functional, total height: 1,150 mm, total length: 1,100 mm, total width: 900 mm, REMA BS200 belt grinder with built-in dust extraction. The machine is designed for grinding flat surfaces. - The integrated extraction system collects dust from the workstation. - The table position can be adjusted to adapt the machine to the required operation. - 1100 mm x 900 mm x 1150 mm (L x W x H) [on pallet] - Maximum belt width: 200 mm Godpfxewq Rkhj Af Aobl No documentation – no CE

Condition: good (used), Year of construction: 2001, functionality: fully functional, grinding width: 150 mm, grinding height: 100 mm, type of input current: three-phase, input voltage: 400 V, Equipment: rotational speed infinitely variable, GREIF 7 station flat surface grinding machine, wet grinding, for square tubes and flat material, 7 belt grinding stations with 4 kW power each, frequency controlled at each station, each station can be swiveled by +-15° for cross grinding, max. grinding width 150 mm, max. grinding height 100 mm, diameter contact disc 200 mm, sanding belt dimensions 150 x 2500 mm, pneumatic belt tension, sanding belt oscillation, machine including return conveyor belt, including paper filter system with 1500 liter capacity. Since the contact wheels are directly driven, this system could also be used for polishing or brushing. If desired, this system can also be offered completely overhauled. Gbodpfx Aotq Twvjf Ajl

Condition: new, Year of construction: 2025, NEW MACHINE Gjdpfx Asrwx Hnef Ajbl please ask for daily updated price! We will make you an individual offer!

Condition: new, Year of construction: 2025, NEW MACHINE Godpfx Aorwx Itsf Asbl please ask for daily updated price! We will make you an individual offer!

Condition: new, Long Belt Grinding Machine LMD2500 incl. Deburring Tool - NEW - Delivery time on request The LMD 2500 is a long belt machine with a flexible abrasive belt that allows the processing of flat surfaces as well as corners or material edges. This machine is ideal for machining irregular shapes, removing welds and deburring and rounding laser cut parts. The flexible and and motorized height-adjustable table is perfect when, due to large dimensions, the workpiece to be machined cannot be easily moved. With the LMD2500, take advantage of the adaptability of the long belt along with different sanding tools such as sanding shoe, manual pad, and deburring brush - or disc - to finish the areas you need. - Grinding flat surfaces with the contact roller. - Stroke finishing with flat pad - Grinding of weld seams - Deburring of laser cut parts - Processing of large surfaces - Interchangeable finishing tools - Flexible deburring/edge rounding station - Pneumatic belt tensioning - Tool carrier with counterweight system - Contact roller tool - Flat tool - Manual pad 100*80mm - Abrasive belt variable speed (8-25m/s) - Edge rounding tool - Including: o Deburring disc holder Ø150mm medium SH hardness o Grinding disc Ø150mm g120 ceramic with velcro support x5 o Surface finishing disc Ø150mm with Velcro backing o Edge Gbedjg I Ipkspfx Af Ajl

Condition: good (used), Year of construction: 1999, Built in 1999 400 V; 50Hz 1.5 kW Linishing belt 100 x 1500 Gjdpfsba Hz Uex Af Ajbl Belt speed 25m / sec. Weight approx. 50 kg

Condition: new, FG170 flat bar and square tube polishing machines are equipments with a solid construction and ready for intensive work in bars or rectangular tubing. These machines enable the work up to 170mm width with multiple combinations of belt heads and brushes. FG170 Z has one abrasive belt unit, while FG170 ZK combines the abrasive belt head with an abrasive brush. A double abrasive belt machine, FG170 2Z, and double abrasive belt plus brush, FG170 2ZK are also available. Other options such as 3 abrasive belts or modification of order of belts and brushes can also be supplied. Different configurations: Finishing and removing imperfections of square and rectangular tubes, flat bars or any flat component with different combinations of abrasive belt and brush stations. Abrasive brush head: Smooth finishing after belt grinding operation with non-woven brush. Square or rectangular tube finishing: High quality of surface finishing on stainless steel tubes, tube after tube also flat bars. Gbjdpfx Asd Ix Ntsf Ajl Quick abrasive belt replacement: Tool-free abrasive belt replacement. Fast and easy belt change in few seconds. Fixed working height: FG machines have a constant working height. The adjustment for different thicknesses is made by the movement of the abrasive stations, keeping the conveyor belt always at the same level. This helps the work of long tubes and bars without having to adjust roller tables. Technical Details - FG170 Working capacity (Ø mm) 170x200 No. belt stations (Z) 1-3 No. brush stations (K) 0-2 Abrasive belt dimensions (mm) 170x2000 Abrasive brush dimensions (mm) 170xØ200 Abrasive belt speed (m/s) 20 Abrasive brush speed (m/s) 15 Feeding speed (m/m) 6+12 Abrasive belts motor per head (kW) 4 Abrasive brush motor per head (kW) 3 Feeding motor (kW) 0.45 Total power (kW) 8.5 (ZK) Consumption (A) 18 (ZK) Dust extraction connection per head (Ømm) 80 Dimensions (mm) 1500x1000x1900 (ZK) Weight (kg) 740 (ZK)

Condition: as good as new (ex-display), A demonstration belt grinder WIEGAND with two belt speeds ideal for steel and stainless steel belt dimensions: 2000 x 150 mm belt speed: 18/ 37 m/sec power: 2,2/ 3,8 kW 400V/50Hz Gbodpfxspgmufe Af Aol weight: 110 kg Tech. Data and dimensions: Errors excepted

Condition: as good as new (ex-display), A demonstration belt grinder WIEGAND Belt dimensions: 2000 x 75 mm belt speed: 18/ 37 m/sec power: 2,2/ 2,8 kW 400V/50Hz weight: 90 kg Tech. Data and dimensions: Errors excepted Gjdpfx Ajpgmtzof Aebl Further tech. Data see pdf. Document