Used Bevel gear testing machines for sale (6)

Condition: used, Year of construction: 2001, max. wheel diameter 400/500 mm CNC-Control GE FANUC Series 160i-M pinion diameter - max. 400 mm crown gear diamter max. 500 mm x-axis +/- 70 mm y-axis 200 mm z-axis 200 mm axis angle 90 Grad speeds: R 0 - 3000 / T 0 - 5000 1/min rated current 30 kVA Bnytuouno weight of the machine ca. 6,2 t dimensions of the machine ca. 3,2 x 2,5 x 2,3 m The Oerlikon T50 is a 3-axis CNC testing machine for fully automatic hard and soft testing of spiral and hypoid bevel gears with an axle angle of 90° Bevel gear analysis ROTEC T50 GA2 Color unit company Binks

Condition: used, Year of construction: 2007, max. wheel diameter 500 mm Hypoid adjustment ±70 mm axial cross angle 90 ° Distance Y- 150 - 350 mm Distance Z-axis 120 - 340 mm Ua7Rrr8Mht turning speed range - stepless 0 - 5000 U/min max. torque on the spindle 57 Nm Cone 99,2 mm Pull-in force Tool clamping 23000 N Braking torque max. 93 Nm total connected load 20 kVA total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2,35 x 2,24 x 2,5 m

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Ufoqo7Yrmf Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: used, Year of construction: 1975, max. wheel diameter 400 mm gear width 0 mm module pinion diameter - max. 254 mm axial cross angle 90 ° total power requirement 15 kW weight of the machine ca. t dimensions of the machine ca. m G L E A S O N (USA) Hypoid Spiral Bevel Gear Running Testing Machine Model 513 TESTER, Year 1975, Serial No. 721607 This machine is very suitable for precision production testing of spiral and hypoid bevel gears with shaft angle 90°. The gear spindle is vertical and the pinion spindle is horizontal. The pinion cone distance can be adjusted while the machine is working in order to find the optimal mounting position whereby the gear is "loaded" Dpfk8F with a preset torque. The axial pinion position can be adjusted until the quietest meshing position of the traction flank is found. Likewise, the thrust flank can be tested during the return run. Marking compound is sprayed on both sides of the teeth so the flank contact pattern can be seen. Working cycles, as well as the positioning in the tooth gap, are automatic. The gear quality can be assessed by recording the harmonic frequencies, which are displayed on a separate monitor and which can be analyzed with a RHF Control. Machine can be used for soft testing of production parts, as well as for mating sets of hardened gears and pinions prior to lapping, and for final testing after lapping to select the optimum pinion mounting distance. Also ideal for lab work, processing, and quality control. Max. gear outside diameter, approx. 508 mm Max. pinion outside diameter, approx. 254 mm Axial cross angle 90 ° Offset of pinion spindle above/below gear spindle, max. 102 mm Diameter of taper hole, pinion spindle 99/95 mm Diameter of taper hole, gear spindle 56/55 mm Speeds of pinion spindle, infinitely variable 0 - 1,250 rpm Speeds of gear spindle, infinitely variable 0 - 1,250 rpm Spindle drive, approx. 5 / 7.5 kW Total electrical load, approx. 15 kW - 380 V - 50 Hz Accessories / Special Features * Large display for 1 / 2 / 3 harmonies, display for pinion distance, pinion speed, as well of gear torque in kg/torque, etc. * Hydraulic workpiece clamping. * Hydraulic slide clamping. * Tank for marking compound with mixer and pump, separate. * Separate switch cabinet. * Separate hydraulic unit. * Lots of spare parts, spare motors, etc. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1998, Machine/vehicle number: 289 570,

Condition: good (used), Equipped with: Automatic Backlash Control Ozlhhgxy8D Spindle Taper Adapter Motors and Controls Hand Remote Worklight Specifications: Distance from center of gear spindle to nose of pinion spindle (maximum): 26" (660mm) Distance from center of gear spindle to nose of pinion spindle (minimum): 6" (152mm) Distance from center of pinion spindle to nose of gear spindle (maximum): 18" (457mm) Distance from center of pinion spindle to nose of gear spindle (minimum): 5" (127mm) Offset of gear spindle above center of pinion spindle (maximum): 5.5" (140mm) Offset of gear spindle below the center of pinion spindle (maximum): 3.5" (89mm) Diameter of gear (maximum): Bevel/Hypoid Gears w/ pinion below center of gear: 36.5" (927mm) Hypoid Gears with pinion 1" above the centerline of gear: 34.5" (876mm) Hypoid Gears with pinion 2" above the centerline of gear: 32.5" (825mm) Hypoid Gears with pinion 3" above the centerline of gear: 30.5" (774mm) Hypoid Gears with pinion 3.5" above the centerline of gear: 28.5" (724mm) Pinion Spindle: Diameter of taper hole at large end: 6" (152mm) Taper per foot: 0.75" (19mm) Depth of taper: 6" (152mm) Diameter of hole through spindle: 5 9/18" (141mm) Gear Spindle: Diameter of taper hole at large end: 3 29/32" (100mm) Taper per foot: 39/64" (15mm) Depth of taper: 6" (152mm) Diameter of hole through spindle: 2.5" (64mm) Electrical Equipment: Main Motor - 2 Speed: 7-1/2 / 3-3/4 HP, 1800/900 RPM Lapping Pump Motor: 1/2 HP, 1800 RPM Drive Spindle: 900/450 RPM Floor Space: 68" x 69" (173mm x 175mm) Net Weight: 7,000 Lbs. (3,175kg) Shipping Weight, Boxed for Export: 7,800 Lbs. (3538 kg)