Used CNC lathes up to 199mm turning diameter for sale (350)

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,000 rpm, travel distance X-axis: 213 mm, travel distance Z-axis: 572 mm, spindle motor power: 14,900 W, overall weight: 4,000 kg, controller manufacturer: HAAS, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2022. This HAAS ST-20 features a maximum cutting diameter of 13.00 in and a maximum cutting length of 22.5 in. It includes a robust spindle power rating of 20.0 hp and a rapid rate of 945 ipm for both axes. If you are looking to get high-quality turning capabilities, consider the HAAS ST-20 machine we have for sale. Contact us for further details. • Chuck size: 8.3 in / 210 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (BOT turret): 13.00 in / 330 mm • Max cutting diameter (BMT65 turret): 11.75 in / 298 mm • Max cutting length: 22.5 in / 572 mm • Bar capacity: 2.50 in / 64 mm • X-axis rapid rate: 945 ipm / 24.0 m/min • Z-axis rapid rate: 945 ipm / 24.0 m/min • X-axis max thrust: 4,100 lbf / 18,238 N • Z-axis max thrust: 5,100 lbf / 22,686 N • Spindle nose: A2-6 • Spindle drive system: Direct speed, belt drive • Spindle max torque: 150.0 ft-lbf @ 500 rpm / 203.0 Nm @ 500 rpm • Spindle bore: 3.50 in / 88.9 mm • Turret stations: 12 stations (VDI 40) • Boring bar rear clearance: 4.00 in / 102.0 mm • Coolant tank capacity: 55 gal / 208 L • Coolant pump: 1 HP / 0.75 kW variable-flow (45 L/min @ 2 bar) • Air requirement: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar • Air pressure minimum: 80 psi / 5.5 bar • Air line / coupler size: 3/8 in • Low voltage electrical: 220 VAC (3 phase), 40 A full load • High voltage electrical: 440 VAC (3 phase), 20 A full load (internal non-isolated transformer 380–480V included) • Shipping dimensions: 143 in x 90 in x 92 in / 362 cm x 229 cm x 234 cm • Control system: Haas NextGen Control with touchscreen interface, 1 GB memory, Ethernet, Wi‑Fi, HaasConnect Remote Monitoring, and Haas Drop • Included machine features/options: Automatic Tool Presetter; Programmable Hydraulic Tailstock (MT4); Rigid Tapping; M130 Media Display; Safe Run; Power Failure Detection Module; Visual Part Programming System Additional equipment • Belt-type chip conveyor • Chip strainer filter kit (200 micron) Technical Specification Taper Size VDI 40 Dcodpfxjz Ha Ups Aizep Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 88271, turning diameter over cross slide: 180 mm, turning diameter: 42 mm, spindle bore: 180 mm, spindle speed (min.): 6,000 rpm, travel distance X-axis: 160 mm, travel distance Y-axis: 60 mm, travel distance Z-axis: 260 mm, spindle motor power: 7 W, rotational speed (min.): 60 rpm, rotational speed (max.): 6,000 rpm, total height: 20,330 mm, total length: 3,420 mm, total width: 1,850 mm, type of input current: three-phase, overall weight: 6,000 kg, Equipment: documentation/manual, Control: Brand & Model FANUC 31i Controller incl. Dynamic graphics display, 10.4” LCD Max. diameter Ø 180 mm Max. machining diameter over the body Ø 180 mm Max. turning diameter Ø 180 mm Chuck diameter 6” Max. workpiece length 180 mm Diameter of workpiece bar material Ø 42 mm Spindle motor FANUC α P12i AC Spindle motor power 5.5/7.5kW Spindle speed range 60~6000rpm Guide type Linear & box ways Travel on X1-axis 160mm Travel on X2-axis 160mm Travel on Y1-axis 60mm(±30) Travel on Y2-axis 60mm(±30) Travel on Z1-axis 210mm Travel on Z2-axis 260mm Rapid traverse on X-axis 15m/min Rapid traverse on Y-axis 10m/min Rapid traverse on Z-axis 36m/min Turret Number of positions 12 Number of rotary positions 12 Rotary position speed 4,000 rpm Power of rotary position motor 3.7 kW Tool change time 0.2sec/single step OD tool shank size 20 mm ID tool shank size Up to Ø 25mm Live tooling shank size 1~16mm ER 25 collets Total installed power 38 kVA Machine weight 6000kg Dimensions LxWxH 2565x2030x1850mm Dimensions with chip conveyor 3420x2030x1850mm Description of basic package and standard accessories 6” hydraulic cylinder x 2 12-position turret x 2 Fanuc αP12 AC spindle motor Thread cutting/Spindle orientation High-precision NSK linear guides Fanuc AC servo drive motors C3 class ball screw pairs Dsdpfszq Rm Tsx Aizscp Coolant system with “Grundfos” ¾ HP coolant pump x2 Hydraulic system Protective screen – full enclosure Automatic guide lubrication system Tool holders and sleeves Signal lamp Work lamp M code automatic power off Foot pedal for chuck RS-232 interface Cooler for the electrical cabinet Foundation and leveling elements Machine maintenance tool kit Machine operating manuals Bar feeder (3 m material length)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Equipment: documentation/manual, Straight driven tools – 2 pcs Angle, 90°, driven tools – 3 pcs Dcsdpfxey I I Nco Aizjp + all tool holders visible in the photo.

Condition: ready for operation (used), Year of construction: 1973, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Traub Type: M125 Year of Manufacture: 1973 Machine Type: Turning Automaton MACHINE DETAILS Electrical Data Dcedj Ad Ik Hepfx Aizep Operating Voltage: 83 V Frequency: 50 Hz Dimensions and Weight Length: 1,500 mm Width: 1,000 mm Height: 1,600 mm Weight: 800 kg

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,000 h, spindle speed (max.): 2,600 rpm, travel distance X-axis: 360 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 980 mm, spindle motor power: 22,000 W, overall weight: 7,000 kg, controller manufacturer: SIEMENS, controller model: 840D Solution Line, number of axes: 4, This 4-axis SPINNER TC800 was manufactured in 2009. It features a radial turret and is equipped with Siemens control, ensuring reliable operation. With approximately 1,000 operating hours, this machine has been barely used. If you are looking to get high-quality turning capabilities, consider the SPINNER TC800 horizontal turning machine we have for sale. Contact us for further details. • Control: Siemens 840D Solution Line • Rapid traverse X-axis: approx. 18 m/min • Rapid traverse Z-axis: approx. 24 m/min • Main spindle speed: up to approx. 4000 rpm • Main spindle power: approx. 24 kW (100%) • Main spindle power: approx. 33 kW (40%) • Spindle nose: A11 • Bar capacity: approx. 77 mm • Tool turret type: VDI 50 Dcedpfx Asyv Epvoizsp • Number of tool stations: 12 • Driven tools: Yes • Number of driven tools: up to 12 • Driven tool speed: up to approx. 4000 rpm • Maximum turning diameter: approx. 500 mm • Maximum swing over bed: approx. 800 mm • Maximum turning length: approx. 800 mm • Tailstock taper: MK4 • Tailstock stroke: approx. 100 mm • Tailstock force: approx. 8500 N • Voltage: 400 V • Frequency: 50/60 Hz • Control voltage: 24 V DC • Compressed air pressure: approx. 6–10 bar • Hydraulic pressure: approx. 70 bar • Chip conveyor: Yes • Coolant system: Yes • Hydraulic unit: Yes • Electrical cabinet: Yes • Radial turret • No quill • Barely used, approximately 1,000 operating hours Technical Specification Counter Spindle No Driven Tools Yes

Condition: like new (used), Year of construction: 2023, operating hours: 506 h, functionality: fully functional, machine/vehicle number: G3790-0043, turning length: 705 mm, turning diameter over cross slide: 290 mm, turning diameter: 230 mm, spindle motor power: 20,000 W, spindle speed (max.): 6,000 rpm, spindle bore: 51 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 5,000 rpm, feed length Z-axis: 700 mm, bar passage: 51 mm, Equipment: rotational speed infinitely variable, 1. CNC turning machine with a 12-position tool turret, capable of simultaneously controlling up to 8 spindles for 2 systems. 2. Enables single-setup machining. 3. Powerful, integrated spindle motor. 4. Robust BMT turret. 5. Multitasking capabilities can be achieved by adding a Y-axis to the upper turret (TTSY specifications). 6. Integrated machining through synchronized control of the main and counter-spindle. 7. Construction with hybrid guides: a combination of box guides (XY-axis) and linear guides (Z-axis). Dodpezd D Nuefx Aizjcp

Condition: ready for operation (used), Year of construction: 2006, operating hours: 38,407 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 650 mm, spindle motor power: 26,000 W, total height: 2,900 mm, total width: 2,500 mm, overall weight: 12,000 kg, controller manufacturer: SIEMENS, controller model: 840 Powerline, product length (max.): 7,855 mm, number of slots in tool magazine: 24, number of axes: 3, This 9-axis Gildemeister TWIN 65 was manufactured in 2006. It features a spindle power of 65 kVA and a maximum spindle speed of 5000 rpm. The machine includes a tool magazine with 24 tools and a turret-type tool changer. With a robust weight of 12,000 kg and dimensions of 7855 mm x 2500 mm x 2900 mm, this horizontal turning machine is equipped with special features like a touch probe and internal coolant supply. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 65 machine we have for sale. Contact us for further details. - 2 units available, identical machine- Production Hours: 38,407 h- Data Interface: USB port available- Interpolation Software (TRACYL / TRANSMIT) installed and available- Configuration: Multi-slide turning center with Slide 1 (Top), Slide 2 (Bottom), and Slide 3 (Counter spindle)- Machine Design: 60° slant bed- Guideways: Roller guideways- Axis Play / Clearance: No known play in X, Y, Z axes or turret heads- Machining Tolerance Condition: Tight machining tolerances consistently maintained- Collision History: No collisions known- Service / Maintenance History: In use and maintained at Heidenhain until 2025; minimal use under current ownership (MBM)- Max Turning Diameter: 250 mm- Max Turning Diameter (Standard): 120 mm- Max Turning Length: 900 mm- X-Axis Travel: 300 mm- Z-Axis Travel: 650 mm- X1 Travel (Upper Slide): 300 mm- Z1 Travel (Upper Slide): 650 mm- Y1 Travel (Optional): ±40 mm- X2 Travel (Lower Slide): 180 mm- Z2 Travel (Lower Slide): 650 mm- X3 Travel (Counter Spindle): 175 mm- Z3 Travel (Counter Spindle): 670 mm- Rapid Traverse X/Z (Slide 1): 30 / 30 m/min- Rapid Traverse X/Y/Z (with Y-axis): 30 / 15 / 30 m/min- Rapid Traverse X/Z (Slide 2): 30 / 30 m/min- Rapid Traverse X/Z (Counter Spindle Slide): 15 / 30 m/min- Feed Force X/Z (Slide 1): 4.0 / 7.0 kN- Feed Force X/Y/Z: 4.0 / 4.0 / 7.0 kN- Feed Force X/Z (Slide 2): 4.0 / 7.0 kN- Feed Force X/Z (Counter Spindle Slide): 4.0 / 7.0 kN- Positioning Resolution: 0.0005 mm- Motor Torque X/Z: 6 / 10.5 Nm- Motor Speed X/Z: 3000 rpm- Ball Screw Pitch X/Z: 20x32 / 20x40 mm (Slide 1 & Slide 2); 10x32 / 20x40 mm (Counter Spindle Slide)- Spindle Drive Type: AC motor with integrated spindle motor- Main Spindle Speed Range: up to 5000 rpm- Main Spindle Power (40/100% ED): 35 / 25 kW (26 kW rated)- Main Spindle Torque (40/100% ED): 370 / 270 Nm- Main Spindle Chuck Size: 175 / 200 mm- Spindle Bore Diameter: 79 mm- Spindle Nose Diameter: 170 mm- Collet Diameter: 66 mm- Front Bearing Diameter: 120 mm- Maximum Rod Diameter: 62 / 65 mm (without reducing tubes)- Main Spindle Clamping: 2-jaw chuck or Hainbuch clamping system (accessories)- C-Axis (Main Spindle): Integrated, 2000 rpm, Holding Torque: 270 Nm- Counter Spindle: Yes- Counter Spindle Speed: up to 5000 rpm- Counter Spindle Power (40/100% ED): 26 / 21 kW- Counter Spindle Torque (40/100% ED): 290 / 230 Nm- Counter Spindle Clamping: 2-jaw chuck or Hainbuch clamping system (accessories)- C-Axis (Counter Spindle): 2000 rpm, Holding Torque: 230 Nm- Total Tool Stations: 24 (2x 12-station turrets)- Tool Stations per Turret: 12- Tool Holder / Taper Size: VDI 30- Tool Shank Size (DIN 69880): 30 / 40 mm- Driven Tools: Yes (All stations capable)- Driven Tool Speed: up to 4000 rpm- Driven Tool Power (40/100% ED): 11.7 / 8. Dsdpfx Aeyvz Ibsizjcp

Condition: ready for operation (used), Year of construction: 2023, operating hours: 3,613 h, spindle speed (max.): 3,250 rpm, travel distance X-axis: 308 mm, travel distance Z-axis: 1,240 mm, spindle motor power: 33,000 W, overall weight: 7,200 kg, controller manufacturer: SIEMENS, controller model: 840D with ShopTurn, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG MORI CLX 550 V3 was manufactured in 2023. It features a maximum turning diameter of 480 mm and a turning length of 1240 mm. The machine is equipped with a powerful spindle capable of 3,250 rpm and a 12-position tool turret. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V3 horizontal turning machine we have for sale. Contact us for further details. Dcjdpfx Aoz Ipileizjp • Control panel: DMG MORI SLIMline Multi-Touch, 19" touchscreen • Axes: 3 (X, Z, C); no Y-axis; no counter spindle • Spindle operating hours: approx. 3613 hWorking capacity and axes • Max turning diameter: 480 mm • Max turning length: 1,240 mm • Swing over bed: 700 mm • Swing over cross slide: 500 mm • Rapid traverse X/Z: 30 m/min • C-axis: main spindle CMain spindle and chuck • Spindle nose: A2-8 • Bar capacity: 102 mm (upgraded main spindle) • Spindle power: 33 kW @ 40% DC / 22 kW continuous • Spindle torque: 630 Nm @ 40% DC / 420 Nm continuous • Chuck: SMW BH-D 320 / A2-8, D103 mm (as specified) • Function: differential clamping pressureTurret and driven tools • Turret: 12-position VDI40 with 6 additional BT stations • Driven tools: up to 4,000 rpm • Driven-tool power/torque: 5.44 kW @ 40% DC; 20 Nm @ 40% DCTailstock • Travel: 1,200 mm • Centre taper: MT5 • Max thrust: 12 kNEquipment and options (machine) • Setup package • Tropical climate package • 12-bar coolant supply • Manual working-area washdown gun • Variable spindle speed software option • DMG MORI IoTconnector • Digital Manufacturing PackageConstruction • Inclined cast-iron bed • Linear guideways, 45 mm width Additional equipment • Mechanical oil mist extraction unit, 1,100 m³/h • Tooling: • Set of 12 tool holders • Set of 6 boring tool holders • ALGra driven-tool holder set Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2019, operating hours: 4,500 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 750 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 830 mm, controller manufacturer: SIEMENS, controller model: 840 D Operate 4,7, number of slots in tool magazine: 12, number of axes: 4, This 4-axis DMG MORI CLX 450 V6 was manufactured in 2019. It features a maximum Z-axis travel of 830 mm and X-axis travel of 750 mm, along with a counter spindle capable of 5000 rpm. The machine includes a bar package, pneumatic workpiece ejection device, and a chip conveyor. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 450 V6 horizontal turning machine we have for sale. Contact us for further details. • Counter spindle: A2-6, 5000 rpm • Tailstock function for counter spindle • Alternating speed cycle (control function) • Hand wheel Additional equipment • Bar package and bar feeder interface • Hainbuch Spanntop NOVA combi pull-back, size 80 (main spindle collet chuck) • Pneumatic workpiece ejection device for counter spindle • SMW BB-D 210 for counter spindle (chuck) • High-pressure coolant, 12 bar • Coolant spray gun • Marposs manual tool measuring probe • Chip conveyor • Bar feeder (will follow) • All tool holders shown in pictures (will follow) Dodpsz Ibqzofx Aizecp Technical Specification Counter Spindle Yes Driven Tools Yes Taper Size VDI 40

Condition: excellent (used), Year of construction: 2025, operating hours: 4,077 h, functionality: fully functional, machine/vehicle number: 10511079, turning length: 550 mm, turning diameter: 160 mm, spindle bore: 65 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 140 rpm, travel distance X-axis: 110 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 320 mm, spindle motor power: 32,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, total height: 2,490 mm, total length: 6,910 mm, total width: 2,092 mm, workpiece weight (max.): 4 kg, type of input current: three-phase, torque: 170 Nm, overall weight: 9,000 kg, bar passage: 65 mm, chuck outer diameter: 160 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale is an INDEX C200 CNC turning machine, manufactured in 2025, from our own machine stock. The machine was delivered and put into operation in 2025 and is in very good, like-new condition. The C200 features extensive equipment with a main and counter spindle, three tool turrets with powered tools, and Y-axes, making it particularly suitable for the economical series production of complex precision turned parts. Technical data / Equipment: - Manufacturer: INDEX - Model: C200 - Year of manufacture: 2025 - Machine No.: 10511079 - Main spindle D65 Dodpjz Hmq Dsfx Aizocp - Counter spindle D65 - Workpiece diameter: max. 65 mm - Main spindle speed: max. 6,000 rpm - Counter spindle speed: max. 6,000 rpm - 3 tool turrets - 14 stations per tool turret - Powered tools - Tool speed: max. 8,000 rpm - Y-axes on the tool turrets - C-axis on main and counter spindle - Tool monitoring and tool management - Coolant high-pressure supply - Coolant/filter system - Chip conveyor - Workpiece removal / portal extraction device - Interface for bar loader magazine UNIMAG4 - Electronic spindle for spindles and drive power - CE conformity - Rated power: 54 kW - Connection power: 65 kVA - Connection: 400 V / 50 Hz Current operating hours according to the machine control: - On time: approx. 4,077 h - Hydraulics: approx. 3,863 h - Spindle / drive running times according to the operating hour counter: S1 approx. 146 h / S2 approx. 1,396 h / S3 approx. 317 h / S4 approx. 1,846 h / S5 approx. 2,224 h The machine is currently located in our factory and can be inspected and demonstrated under power after prior arrangement. We would be happy to provide further detailed images, technical documentation, and an official offer with a detailed equipment list if you are seriously interested.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 565 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total width: 2,100 mm, overall weight: 6,000 kg, product length (max.): 3,900 mm, number of axes: 3, This 3-axis Okuma LB3000 EX was manufactured in 2008. It features a maximum turning diameter of 340 mm and a distance between centers of 1020 mm. The machine is equipped with a powerful OSP-P200 control system and offers a spindle speed range of 45–5000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000 EX horizontal turning machine we have for sale. Contact us for further details. • Control system OSP-P200 • 12-station tool turret radial • Revolver 12 driven tools • Number of revolvers 1 • Tool holder BMT 60 • Number of tools 12 • Number of tools available approx. 200 • Driven tool stations power 7.1 kW • Driven tool torque 40.4 Nm Dcedpfx Asy Aaxrjizjp • Driven tool speed range 45–6000 rpm • C-axis included • Sub-spindle with W-axis • Main spindle bore 110 mm • Spindle bore 80 mm • Spindle nose A2-11 • Spindle speed range 28–2800 rpm • Spindle speed 45–5000 rpm • Main spindle drive 22/15 kW • Power at 40% duty cycle 22 kW • Maximum turning diameter 340 mm • Distance between centers 1020 mm • Programmable chuck pressure (2 levels) • Thread milling interpolation X/Y and Z/Y axes • Workpiece catcher programmable • Chip conveyor with integrated coolant tank • Paper band filter system heavy-duty • Coolant tank capacity 480 l • Coolant pump 40 l/min at approx. 20 bar • Coolant pump type Brinkmann TH 90/690-FSI • Extraction connection diameter 200 mm • Hollow clamping cylinder bore 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore 101 mm • Drawtube for spindle max. 100 mm • Collet chuck Hainbuch Axfix 100 • Clamping range 42–100 mm • Manual collet change device • Sub-spindle stroke 150 mm • Bar feeder interface • Short bar loader IRCO ILS RBK • Bar capacity diameter 5–100 mm • Spindle reduction tube diameter 90 mm length 1500 mm • Chip disposal conveyor PVC with PU coating • Hydraulic clamping cylinder bore 52 mm • Machine dimensions 3.9 m x 2.1 m x 2.3 m • Machine weight 4000–6000 kg • Maintenance contract yes • Utilization highOPTIONAL for an additional charge: Approx. 200 tools availableElectrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, spindle bore: 51 mm, spindle motor power: 15 W, workpiece weight (max.): 4,500 kg, type of input current: three-phase, Equipment: documentation/manual, We offer this used Miyano BND-51SY CNC lathe, year of construction 2004. Model: BND-51SY Serial Number: 21YK63387 2x spindle 1x revolver live tools part collection hand part conveyour belt Iemca barfeeder 2x C axis swarf conveyour Spindle Motor SP1: 11 / 15 kW Spindle Motor SP2: 3.7 / 5.5 kW Fanuc control All books and manual available. Dcedpfezw Dgtjx Aizsp Run by oil, under power in production, can be tested. Machine is in very good condition and was running in 1 shift only. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 180 mm, turning length: 180 mm, turning diameter: 180 mm, spindle bore: 42 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 60 rpm, overall weight: 6,000 kg, CNC LATHE GTS-150 For sale GTS-150 CNC lathe, a compact yet powerful machine suitable for precise and efficient turning operations. Thanks to its rigid construction, high spindle speed, and reliable FANUC control, this machine is an excellent choice for versatile workshop and subcontracting use. Technical specifications: Max. turning diameter: Ø180 mm Max. turning length: 180 mm Max. swing over cover: 180 mm Chuck size: 6″ Bar capacity: Ø42 mm Spindle bore: Ø51 mm Spindle speed range: 60–6000 rpm Spindle motor: 5.5 / 7.5 kW Spindle bearing diameter: Ø80 mm Spindle nose: A2-5 X1 / X2 travel: 155 mm Z1 travel: 180 mm Z2 travel: 500 mm Controller: FANUC 18i-TB Hydraulic / coolant tank capacity: 50 / 140 L Machine dimensions (L × W × H): 2.4 × 1.7 × 1.8 m Machine weight: approx. 6000 kg General: Dcjdex Hr Slopfx Aizjp Rigid and stable construction High-speed spindle with precise motion control Suitable for both single-piece and series production Excellent choice for subcontracting and precision machining Machine comes with IEMCA bar feeder Ask quote including transporation. Verify all specifications with the seller.

Condition: ready for operation (used), WEISSER SÖHNE Dcedpfx Aiez Sd D Iozop UNIVERTOR AC-2 High-precision, twin-spindle vertical CNC turning center. Complete and fully ready for operation.

Condition: used, Year of construction: 2002, operating hours: 1,230 h, turning length: 120 mm, turning diameter: 190 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 135 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 450 mm, bar passage: 40 mm, CNC Lathe Manufacturer: MORI SEIKI Model: ZT 1000 Y Year of Manufacture: 2002 Control System: MSG-501 Technical Details: Turning Diameter: 190 mm Turning Length: 120 mm Max. Swing Diameter: 250 mm Dcsdo Aaq Ugopfx Aizsp Distance Between Centers: 750 mm Bar Capacity (Through-bore): 40 mm X-axis: 135 mm Z-axis: 450 mm Y-axis: ±40 mm Spindle Speed: 6,000 rpm Number of Tool Stations: 16 positions Operating Hours: approx. 1,230 h The machine comes from its first owner and has very low operating hours. It has been very well maintained and can be inspected under power by appointment. Technical Features & Accessories: - Chip conveyor - Parts catcher and discharge conveyor - High-pressure coolant system - 16-station upper turret with Y-axis - Bar feeder interface - Hainbuch collet chuck system - Three-jaw chuck - Static and driven (live) tool holders Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,928 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 276 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 755 mm, spindle motor power: 25,500 W, overall weight: 6,250 kg, controller manufacturer: SIEMENS, controller model: 840D with ShopTurn, number of slots in tool magazine: 12, number of axes: 6, This 6-axis DMG MORI CLX 450 V6 was manufactured in 2021. It features a maximum turning diameter of 400 mm, X-axis travel of 276 mm, Y-axis travel of ±60 mm, and Z-axis travel of 755 mm. The machine is equipped with a 12-position VDI 40 turret and a powerful spindle with a maximum speed of 4,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CLX 450 V6 machine we have for sale. Contact us for further details. • Control: Siemens 840D with ShopTurn • HMI: DMG MORI SLIMline Multi-Touch, 19" touchscreen • Spindle operating hours: approx. 2,928 hWorking capacity and axes • Axes: X, Y, Z; C-axis on main and counter spindle • Max turning diameter: 400 mm • Swing over bed: 700 mm • Swing over cross slide: 370 mm • Rapid traverse: X/Z 30 m/min; Y 22.5 m/minMain spindle • Spindle nose: A2-8 • Bar capacity: 80 mm • Power: 25.5 kW (40% ED) / 17 kW (S1) • Torque: 426 Nm (40% ED) / 283 Nm (S1) • Differential clamping pressure functionCounter spindle • Max speed: 5,000 rpm • Spindle nose: A2-6 • Power: 14 kW (40% ED) / 13 kW (S1) • Torque: 192 Nm (40% ED) / 171.5 Nm (S1) Djdpfxez Inlxs Aizecp • Differential clamping pressure function • Internal chuck flushing • Auxiliary tailstock functionTool turret and driven tools • 12-position VDI 40 turret with 6 additional BT stations • Driven tools: up to 4,000 rpm • Driven-tool power/torque: 5.44 kW (40% ED) / 20 Nm (40% ED)Equipment/options (machine-integrated) • Setup package: 12-bar coolant supply system; 5-bar coolant washdown gun • Safe clamping package • Connectivity: DMG MORI IoTconnector; DMG MORI Messenger V4 • Siemens software options: Multi Threading 2.0; Variable spindle speed; Y-axis parting cycle; Keyway Broaching cycleElectrical data • Supply voltage: 400 V ±10%, 50 Hz • Phases: L1, L2, L3, N, PE • Connected load: 39 kVA • Max rated current: 56 A Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 1982, functionality: fully functional, Weiler Condor VS2 lathe, manufactured in 1982, with a three-jaw chuck, Multifix system, and collet chuck assembly including a set of collets. The machine is in good, operational condition and can be demonstrated under power by arrangement. Dodpfx Ajzq R Anoizjcp

Condition: used, Year of construction: 2006, controller manufacturer: Siemens, controller model: 840D - Powerline, _____ Description: Year of manuf. : 2006 Control : Siemens 840D - Powerline Turning diam. : 140 mm Turning length : 480 mm Dcods Aa Hm Eepfx Aizep Mainspindle: Technology:Belt-driven spindle Speed:6.300 rpm Power (max.):10 kW Torque (max.):78 Nm C-Axis:0,001° Barcapacity:45 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axfix Gr. 65 Subspindle: Technology:Belt-driven spindle Speed:7.000 rpm Power (max.):10 kW Torque (max.):45 Nm C-Axis:0,001° Workpiececlamping:3-Jaw chuck, Röhm KFD-HS 130-3 Movement in Z:510 mm Rapid travers in Z:24 m/min Toolcarrier I (X/Z): Technology:Turret with 12 stations Taper:VDI25 Tooldrive:6.000 rpm, 7,5 kW, 12 Nm Movement in X/Z:160/510 mm Rapid travers in X/Z:20/24 m/min Toolcarrier II (X): Technology:Turret with 12 stations Taper:VDI25 Tooldrive:6.000 rpm, 7,5 kW, 12 Nm Movement in X:140 mm Rapid travers in X:20 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Cooling pumps with Highpressure, 14 bar Raw materialfeed:Bar loader, EMCO Top Load 8-45 Finishpart removal:Part catcher with conveyor belt Extraction:Interface mechanical prepared Further Equipment:Rinsing pistol Further Accessory:Misc. used static and driven Toolholder

Condition: used, Year of construction: 2020, operating hours: 19,485 h, spindle speed (max.): 5,000 rpm, overall weight: 10,000 kg, CNC Lathe Manufacturer: DMG MORI Model: SPRINT 65 2T Year of manufacture: 2020 Control system: Siemens 840D sl Operate Technical details: Spindle speed: 5,000 rpm Number of tool stations: 2 x 12 Machine weight: approx. 10 t Operating hours: approx. 19,485 h Spindle hours: approx. 9,037 h Condition: Used Available from March 2027 Dsdpfe Advfxsx Aizscp Technical features & accessories: - 3 cross slides - 2 turrets, 12-station (driven/live tooling) - 2 C-axes - Y-axis on slide 1 - Y-axis on slide 2 - Chip conveyor - Breuning bar loader Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: ready for operation (used), Year of construction: 2020, operating hours: 20,292 h, spindle speed (max.): 3,250 rpm, travel distance X-axis: 308 mm, travel distance Z-axis: 1,240 mm, spindle motor power: 33,000 W, overall weight: 7,200 kg, controller manufacturer: SIEMENS, controller model: Siemens 840D with ShopTurn, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG MORI CLX 550 V3 was manufactured in 2020. It features a maximum turning diameter of 480 mm and a turning length of 1240 mm. The machine is equipped with a 12-position VDI 40 turret and a maximum spindle speed of 3250 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V3 horizontal turning machine we have for sale. Contact us for further details. • Control panel: DMG MORI SLIMline Multi-Touch, 19-inch touchscreen • Controlled axes: 3 (X, Z, C) • Spindle operating hours: approx. 20,292 hWorking capacity and axes • Max turning diameter: 480 mm • Max turning length: 1,240 mm • Swing over bed: 700 mm • Swing over cross slide: 500 mm • Rapid traverse X/Z: 30 m/min • Main spindle C-axisMain spindle and chuck • Spindle nose: A2-8 • Upgraded bar capacity: 102 mm • Spindle power: 33 kW @ 40% / 22 kW continuous • Spindle torque: 630 Nm @ 40% / 420 Nm continuous • Hydraulic chuck: SMW BH-D 320 / A2-8, D103 mm • Differential clamping pressure functionTool turret and driven tools • Turret: 12-position VDI 40 with 6 additional BT stations • Driven tools: yes • Max driven-tool speed: 4,000 rpm • Driven-tool power: 5.44 kW @ 40% • Driven-tool torque: 20 Nm @ 40%Tailstock • Tailstock travel: 1,200 mm • Centre taper: MT5 • Max thrust: 12 kNEquipment and options • Setup package Dcsdpfxez Ipawe Aizjp • Tropical climate package • 12-bar coolant supply system • Manual working-area washdown gun • Variable spindle speed function • DMG MORI Service Agent • DMG MORI Messenger V2 • DMG MORI NETservice • DMG MORI IoTconnector • Screen languages: German/PolishConstruction • Inclined cast-iron bed • Linear guideways, width 45 mm Additional equipment • Mechanical oil mist extraction unit, 1,100 m³/h • WTO VDI 40 driven-tool holder set • Set of three soft jaws for BH-D315 chuck Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2021, operating hours: 293 h, functionality: fully functional, machine/vehicle number: 2115011184, - Heavy-duty design - Compact construction - SIEMENS servo motors on all axes - All servo motors with integrated encoder for maximum precision - 30° slant bed design for particularly large machining diameters - Improved, unobstructed chip flow into the chip tray - Hydraulic three-jaw chuck Ø 200 mm - Hard and soft top jaws - Standard tool turret VDI 30 with 8 tool stations - Hardened and precision ground ball screws for high rapid traverse speeds on all axes - Dimensionally stable linear guides ensure a long service life through maximum static and dynamic rigidity - Manual tool measurement device - Tailstock with hydraulic quill - Heat exchanger - Portable electronic handwheel with enabling button and emergency stop rocker switch for easy program setup - Belt-type chip conveyor ensures efficient chip removal - Chip trolley - Halogen work light for complete illumination of the workspace - Coolant system - EMC (Electromagnetic Compatibility) - SINUMERIK 828D Basic ----- Dodpfxsyzr Sns Aizecp Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer tailored financing options to suit your needs. Whether it is a down payment, installment plan, or a customized financing model – together we will find the right solution. On request, we can also handle the entire transport process. From planning to reliable delivery, we ensure a smooth and punctual transaction so you don’t have to worry about a thing. 📞 Feel free to contact us for further information or a non-binding offer. We offer you personal and competent advice. Subject to prior sale, changes, and errors!

Condition: used, Year of construction: 1996, functionality: fully functional, Weiler Commodor B AC lathe, manufactured in 1996, with a 3-axis Weiler digital display, three-jaw chuck, Multifix system, rear splash guard, and electric chuck guard. The machine is in good, operational condition and can be demonstrated under power by arrangement. Dodpfjzr El Tjx Aizocp

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 240 mm, travel distance Z-axis: 950 mm, number of axes: 3, This 2-axis SOMAB OPTIMA 450 was manufactured in 2007. It features an X-axis travel of 240 mm and a Z-axis travel of 950 mm, along with a 12-position VDI 30 turret. If you are looking to get high-quality turning capabilities, consider the SOMAB OPTIMA 450 horizontal turning machine we have for sale. Contact us for further details. Technical Specification Dsdpfx Ao Agk R Asizscp Taper Size VDI 30 Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2022, operating hours: 4,104 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 235 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 580 mm, spindle motor power: 18,500 W, total height: 2,085 mm, total width: 1,814 mm, overall weight: 4,200 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, product length (max.): 2,790 mm, number of slots in tool magazine: 12, number of axes: 6, This 6-axis SMEC SL2000SY was manufactured in 2022. It features a maximum turning diameter of 395 mm and a maximum machining length of 450 mm. The machine is equipped with a Siemens SINUMERIK 828D control system and a tool turret capacity of 12 stations. If you are looking to get high-quality turning capabilities, consider the SMEC SL2000SY horizontal turning machine we have for sale. Contact us for further details. Dsdpfxez A T Uuo Aizocp - Control: Siemens SINUMERIK 828D with OPERATE + PPU290 (Touchscreen)- Swing over bed: 650 mm- Swing over cross slide: 540 mm- Max. turning diameter: 395 mm- Max. machining length: 450 mm- Y-axis travel: 105 mm (±52.5 mm)- Main Spindle Chuck Diameter: 210 mm (8")- Main Spindle Nose Norm: A2-6- Main Spindle Bearing Inner Diameter: 110 mm- Main Spindle Max. Bar Capacity: 67 mm- Main Spindle Bore Diameter: 76 mm- Main Spindle Drive Power: 18.5 / 11 kW- Main Spindle Max. Torque: 209.5 Nm- Sub-Spindle Chuck Diameter: 152 mm (6")- Sub-Spindle Nose Norm: A2-5- Sub-Spindle Bearing Inner Diameter: 90 mm- Sub-Spindle Max. Bar Capacity: 36 mm- Sub-Spindle Bore Diameter: 45 mm- Sub-Spindle Drive Power: 9 / 5.5 kW- Sub-Spindle Max. Torque: 51.9 Nm- Sub-Spindle Max. Speed: 6,000 rpm- Tool Turret Capacity: 12 stations (24-position indexing)- Tool Holder Type: BMT55- Driven Tool Drive Power: 5.5 / 3.7 kW- Driven Tool Max. Speed: 5,000 rpm- Driven Tool Max. Torque: 35 Nm- Stationary Tool Cross Section: 25 x 25 mm- Boring Bar Holder Cross Section: Ø40 mm- Station-to-Station Index Time: 0.2 sec- Rapid Feed X-axis: 18 m/min- Rapid Feed Z-axis: 30 m/min- Rapid Feed B-axis: 24 m/min- Rapid Feed Y-axis: 12 m/min- Slant Bed Angle: 30 degrees- Coolant System Tank Capacity: 10 bar pressure, 2.2 kW pump- Hydraulic Tank Capacity: approx. 14 L (35 bar max pressure)- Voltage / Electrical Connection: 400 V, 50 kVA- Pneumatic Connection: 6 bar- Net Weight Chip Conveyor: approx. 1,000 kg- Net Weight Transformer: approx. 300 kg- Additional Included Equipment: WTO Tool Holder Package, SAMCHULLY 3-jaw power chucks (8" main, 6" sub), Chip conveyor (side discharge), Oil skimmer with endless belt, Automatic tool setter arm, Part catcher & ejector, Bar feeder interface Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,900 W, overall weight: 6,550 kg, controller manufacturer: SIEMENS, controller model: 828D, number of slots in tool magazine: 12, number of axes: 6, This 6-axis DOOSAN PUMA 2600 SY II was manufactured in 2020. It features a maximum turning diameter of 376 mm and a turning length of 760 mm. The machine is equipped with a powerful spindle speed range of 20–4,000 rpm and a robust turret with 12 tool stations. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 2600 SY II horizontal turning machine we have for sale. Contact us for further details. • Controlled axes: X, Z, Y, B, C1, C2 • Slant bed: 30°Travels and rapid traverse • B-axis (sub-spindle) travel: 830 mm • C1-axis: ±360° • C2-axis: ±360° • Rapid traverse (X / Z / Y / B): 30 / 30 / 10 / 30 m/minMain spindle • Spindle nose: ASA A2-8 • Hydraulic chuck: 254 mm, 3-jaw • Max. torque: 730 Nm • Spindle bore: 91 mm Dcedpfsz N Dhtex Aizop • Drawtube ID: 82 mm • Integrated built-in spindle motor • C1 positioning resolution: 0.001°Sub-spindle • Spindle nose: ASA A2-5 • Hydraulic chuck: 170 mm, 3-jaw • Speed range: 60–6,000 rpm • Motor power: 18.2 kW • Max. torque: 220 Nm • Spindle bore: 62 mm • Drawtube ID: 50 mm • Built-in motor • C2 positioning resolution: 0.001° • Part ejector stroke: 120 mmMachining capacity • Max. swing over bed: 780 mm • Max. swing at front door: 680 mm • Max. swing over carriage: 630 mm • Max. turning diameter: 376 mm • Max. turning length between centers: 760 mm • Max. bar capacity, main spindle: 81 mm • Max. bar capacity, sub-spindle: 49 mm • Off-center milling capacity (Y-axis): 105 mm (±52.5 mm) • Max. cantilever workpiece weight: 260 kg • Max. workpiece weight using sub-spindle: 520 kgTurret and driven tools • Turret type: BMT-65 • Turret indexing positions: 24 • Tool stations: 12 (all 12 driven) • Indexing time: 0.15 / 0.65 sec • Turning tool size: 25 × 25 mm • Boring tool capacity: Ø50 mm / Ø32 mm • Driven-tool speed: 50–5,000 rpm • Driven-tool power: 4.1 / 7.79 kW • Max. driven-tool torque: 79.8 Nm • ER-32 capacity: Ø3–20 mm • Rigid tapping: Yes Technical Specification Counter Spindle Yes Driven Tools Yes