Used center lathes over 1000mm turning diameter over bed for sale (88)

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,550 mm, turning diameter over bed slide: 1,550 mm, turning diameter over top slide: 1,220 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,600 mm, total height: 1,600 mm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-155B2/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 6.000 mm - turning diameter over bed: 1.550 mm - turning diameter over support: 1.220 mm - turning diameter in bridge recess: 1.880 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 8.500 mm width: 2.130 mm height: 1.550 mm total weight: 14.100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants Rjdpfx Aajv Ab Dqszon - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post - Standalone chip and splash protection back wall over the whole machine length - inverter in the E-cabinet with slow-start-function and 1 x stepless potentiometer controller

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 5,000 mm, total length: 7,500 mm, total width: 2,130 mm, total height: 1,550 mm, rotational speed (max.): 630 rpm, rotational speed (min.): 5 rpm, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B1/5M universal lathe has been comprehensively rebuilt and modernized in February 2025, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: in stock, under power, ready for technical acceptance. Technical data: - distance between centers/turning length: 5000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - Power feed on compound slide for machining tapers, conical parts, 1°- 90°, up to 450 mm Redpeva Elaofx Aazen - maximum workpiece weight between centers: 8,000 kg - maximum workpiece weight between centers + 1 steady: 10,000 kg - maximum workpiece weight between centers + 2 steadies: 11,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 22/41 (1st gear / 2nd gear) - overall dimensions: total length: 7500 mm width: 2130 mm height: 1550 mm total weight: 13200 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover, chip tanks Additional equipment available for price upgrade: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: excellent (used), functionality: fully functional, turning diameter: 1,000 mm, turning length: 8,000 mm, total length: 10,500 mm, For sale is a used lathe from the Czech manufacturer TOS, model SU 100, with extensive equipment as shown in the photos. Technical specifications: Turning diameter over bed: 1,000 mm Turning length: 8,000 mm Rsdpfxev Epk Ds Aazon Extensive equipment as shown in the photos: 1 x 4-jaw chuck 2 x steady rest 1 x travelling steady

Condition: excellent (used), functionality: fully functional, turning diameter: 1,000 mm, turning length: 8,000 mm, total length: 10,500 mm, A used lathe from the Italian manufacturer Leopolod Pontiggia, model NH 500, is for sale. Technical specifications: Turning diameter over bed: 1,000 mm Turning length: 8,000 mm Extensive equipment as in the photos: 1 x 3-jaw chuck 1 x 4-jaw chuck 1 x steady rest Rsdpfx Aaev Epigszon + various adapters

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,550 mm, turning diameter over bed slide: 1,550 mm, turning diameter over top slide: 1,220 mm, turning length: 10,000 mm, total length: 12,500 mm, total width: 1,600 mm, total height: 1,600 mm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-155B2/10M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 10000 mm Rjdpova Ebnjfx Aazon - turning diameter over bed: 1550 mm - turning diameter over support: 1220 mm - turning diameter in bridge recess: 1880 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 12500 mm width: 2130 mm height: 1550 mm total weight: 17700 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 5,000 mm, total length: 7,500 mm, total width: 2,130 mm, total height: 1,550 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 5 rpm, overall weight: 12,900 kg, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-135B2/5M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Rsdpfei Apilox Aazon Availability: delivery time 3,5 months, starting from the order Technical data: - distance between centers/turning length: 5000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 22/41 (1st gear / 2nd gear) - overall dimensions: total length: 7500 mm width: 2130 mm height: 1550 mm total weight: 12900 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 2,130 mm, total height: 1,550 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 5 rpm, overall weight: 14,100 kg, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B1/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 6000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 8,000 kg - maximum workpiece weight between centers + 1 steady: 10,000 kg - maximum workpiece weight between centers + 2 steadies: 11,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power: 27/41 kW - overall dimensions: total length: 8500 mm width: 2130 mm height: 1550 mm total weight: 14100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants Redpfx Aofhk Insazen - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 105 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 3,000 mm, total length: 5,500 mm, total width: 1,800 mm, total height: 1,800 mm, overall weight: 11,400 kg, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B/3M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 3000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 105 mm - maximum workpiece weight between centers: 8000 kg - maximum workpiece weight between centers + 1 steady: 10000 kg - maximum workpiece weight between centers + 2 steadies: 11000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 5500 mm width: 2130 mm height: 1550 mm total weight: 11400 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post Rodpfedy I I Ajx Aazen

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 10,000 mm, total length: 12,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle mount: MK 6, The PORĘBA TR-135B2/10M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical data: - distance between centers/turning length: 10000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 22/41 (1st gear / 2nd gear) - overall dimensions: total length: 12500 mm width: 2130 mm height: 1550 mm total weight: 17700 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers Rjdpekh Hbhjfx Aazsn - MULTIFIX quick change tool post

Condition: used, Year of construction: 1970, MAKE STANKO (RUSSIA) MODEL 165 DISTANCE BETWEEN CENTER 3000 MM Rodpfxeycl Tto Aazsn CENTER HEIGHT 530 MM SWING OVER BED 1060 MM CROSS OVER CARRAIGE (MAX JOB DIA. OVER CROSS SLIDE) 700 MM SPINDLE SPEED 50–500 RPM BED WIDTH 770 MM SPINDLE BORE 95 MM MAX. WORKPIECE WEIGHT CAPACITY 10 TONNES APPROX WEIGHT 12 t

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 1,800 mm, turning diameter: 2,000 mm, turning length: 8,000 mm, total length: 12,000 mm, overall weight: 29,500 kg, Machine can be inspected under power Rsdpfx Aajwv S D Hjzen

Condition: good (used), Year of construction: 1980, turning diameter over bed slide: 1,040 mm, turning diameter over top slide: 710 mm, turning length: 2,000 mm, bed width: 600 mm, Optional chuck 1200 mm 2 Axis RSF Digital read out Conical turning attachment Spindle bore 130 mm Central lubrication Redpfx Aaex Tgr Tjzjn DBC Turning Length: 2000mm Swing over bed Ø: 1040mm Swing over cross slide Ø:710mm Swing in the gap Ø: 1780mm Gap length: 1000mm Spindle bore: 130mm Bed width: 600mm Tailstock spindle Ø: 130Ø Stroke pinole: 300mm Spindle taper: 6Mk Power: 22kW Speeds / ranges: 600Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 4000mm/min. Length: 6000mm Width: 2100mm Height: 2100mm Weight: 8300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Swing over the bed: 1250mm Rsdpfevprffox Aazon Max length of the workpiece: 10000mm Max mass of the workpiece at machining between centres with rest: 10000kg Height of the cutting tool set in tool holder: 50mm

Condition: used, Year of construction: 1952, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 520 mm turning length: 2500 mm support travel z-axis: plan: ca. 500 mm support travel z-axis: Obersupport: ca. 300 mm centre height: 300 mm spindle passage: 90 mm range of revolution per miute: 3,2 - 382 / 22 step U/min range of feed in x - axis: längs: 0,213 - 2,67 / 36 step m/min range of feed in y - axis: quer: 0,070 - 1,11 / 36 step m/min tailstock quill taper MT: 6 total power requirement: 22 weight of the machine ca.: 8,2 t dimension machine xH: 5,3 x 1.,6 x 1,6 m transport measurements machine: ca. 5,5 x 1,7 x 1,6 m Redpsu Tq U Ijfx Aazon Equipment: Faceplate Ø 1000mm 4-fold turning tool holder Lynette Ø 250 closed Accesorios four-jaw chuck Ø 630 i.D. *

Condition: used, Technical details: turning diameter over bed: 1040 mm turning diameter over support: 720 mm centre distance: 5400 mm center height over bed: 540 mm control: Siemens 828D CNC mit shop turn turning dia. in gap: 1300 mm length of gap: 640 mm spindle bore: 152 mm revolution per minute: 3,5...1000/ 4 steps U/min feed:: x-Achse: 37,24 (m/min) m/min feed:: z-Achse: 21,91 (m/min) m/min force of feed longitudinal: x-Achse: 6,44 (KN) N feed force Z - max.: 17,2 (KN) N tailstock taper MT: MK 6 tailstock quill stroke: 300 mm total power requirement: ca. 30 kW Redeu Ix Rpspfx Aazen weight of the machine ca.: 14,1 t space requirement approx.:: L:7,7xB:1,7xH:2,0 m CNC Lathe with shop turn Geometric overhaul is in procedure. Equipment: - headstock Morse 6, travel of spindle sleeve 300mm - thread cutting possible (metric thread, inch threads, module threads) - multi quick steel holder swiveable 360° - 3-jaw lathe chuck Ø=630mm - chuck protection - 2 steady rests (Lynettes) (1x fixed + 1x fixed open) - 4 pcs tips for tailstocks - 5 x multi quick change steel holder for chisel - 1 x drill chuck 16mm + 2x drills with MK-cone sleeves 68,5mm & 24,75mm - 1 lot self constructed clamping means Accessories: - face chuck Ø=800mm (adaptation necessary) - CNC turning with shop turn - your benefits at first glance: - flexible programing via graphic interactive (without DIN/ISO knowledge) or text programming with contour definition and cycle support - user friendly operation through practical set up -and measuring operations, clearly arranged tool managment and 3D-Simulation - increase of productivity via supporting PC-Software for work preparation without machine assignment *

Condition: new, Year of construction: 2025, TYTAN 750 PRO 400V universal lathe. The lathe is designed for machining external and internal cylindrical surfaces, thread cutting, drilling, countersinking and reaming holes. It is usually used in small industrial plants, workshops, garages, etc. Machine description The TYTAN 750 VARIO PRO lathe, thanks to the smooth spindle speed adjustment, is an ergonomic machine that responds to the user's needs. Reducing the time it takes to set up the machine while machining parts of a wide range of sizes translates into efficiency and ease of use. Main advantages: + A modern motor with smooth spindle speed regulation ensures comfort of use and shortens the calibration time. + The LCD screen with the spindle speed display allows you to control and quickly modify the spindle speed while setting the cutting and tapping modes. + Two spindle speed ranges: reduced (50-1250) for machining hard steels and increased (100-2500) for high-speed precision turning. + Threads cut: metric - 18 degrees (0.2-3.5), inch - 21 degrees (8-56) left and right threads can be cut. + The automatic longitudinal feed has 6 speed ranges (0.07 to 0.40) mm / rev. - thanks to it, the machining time is much shorter, which does not deteriorate the quality of work when turning long parts. + The TYTAN 750 vario PRO lathe, thanks to the smooth spindle speed adjustment, is an ergonomic machine responding to the user's needs. Reducing the time it takes to set up the machine while machining parts of a wide range of sizes translates into efficiency and ease of use. Redpfxovvlxlo Aazjn + The machine is fully compliant with the requirements of EU directives (CE) as well as Polish regulations and DIN standards. Technical parameters dimensions Turning diameter over bed 250 mm Turning diameter over cross slide 150 mm Claw spacing 750 mm Bed width 135 mm Spindle passage 27 mm Spindle taper MK4 Spindle speed adjustment smooth Spindle speed 50-1250 | 100-2500 rpm Number and range of metric threads (18) 0.2-3.5mm / rev Number and range of inch threads (21) 8-56 zw./cal Number and range of feeds 0.07-0.4mm / rev Top slide travel range 70 mm Maximum cross slide travel 135 mm Maximum travel of the longitudinal slide 650 mm Maximum tool size 16 x 16 mm Feed the tailstock sleeve 60 mm Tailstock taper MK2 Handle size 125 mm Spindle motor 1.1 kW L / W / H 1,350 x 560 x 1,250 mm Weight 170 kg

Condition: new, Year of construction: 2025, TYTAN 750 VARIO Metal Lathe (230V) with Variable Spindle Speed Control The TYTAN 750 VARIO is a versatile metal lathe designed for machining external and internal cylindrical surfaces, threading, drilling, countersinking, and reaming. With a working range of 250 x 750 mm and a DC motor (1.1 kW / 230V), it is ideally suited for small industrial workshops, repair shops, and home garages. Key Features Modern DC motor with stepless spindle speed control offers ease of use and minimizes setup time. LCD display shows real-time spindle speed, enabling precise adjustments during cutting and threading. Two spindle speed ranges: Low: 50–1125 RPM – for machining hard steels High: 100–2250 RPM – for high-speed precision turning Thread cutting capabilities: Metric threads – 18 types (0.2–3.5 mm) Imperial threads – 21 types (8–56 TPI) Capable of cutting both right- and left-hand threads Automatic longitudinal feed – 6 speed settings (0.07–0.40 mm/rev) significantly reduce machining time while maintaining accuracy during long part turning. Fully compliant with EU directives (CE) and DIN standards for safety and quality. Technical Specifications Parameter Value 3-jaw chuck 125 mm Max. turning diameter over bed 250 mm Turning diameter over cross slide 150 mm Distance between centers 750 mm Max. part length (chuck to center) 700 mm Bed width 135 mm Tool post size 65 x 65 x 20 mm Max. tool size 12 x 12 mm Spindle bore 30 mm Spindle taper MT4 Spindle speed control Stepless (L/H range) Spindle speed range (L/H) 50–1125 / 100–2250 RPM Metric threads 18 types (0.2–3.5 mm/rev) Imperial threads 21 types (8–56 TPI) Longitudinal feed rates 6 settings (0.07–0.4 mm/rev) Compound slide travel 70 mm Longitudinal slide travel 650 mm Cross slide travel 135 mm Tailstock quill diameter 30 mm Tailstock quill travel 60 mm Tailstock taper MT2 Motor power (S1/S6) 1.1 / 1.32 kW / 230 V Dimensions (L/W/H without stand) 1310 x 610 x 490 mm Dimensions (L/W/H with stand) 1350 x 560 x 1250 mm Weight (without stand) 165 kg Weight (with stand) 180 kg Standard Equipment 3-jaw chuck (125 mm) Fixed and traveling steady rests Change gears set Fixed center MT2 Fixed center MT4 Reversible chuck jaws (1 set) Grease gun Chip tray Rodsw H Rauspfx Aazon Chuck key and tool post wrench Service tool kit CE-compliant safety guards

Condition: good (used), Year of construction: 1988, turning diameter over cross slide: 900 mm, spindle bore: 105 mm, turning diameter: 1,200 mm, turning length: 5,000 mm, total length: 8,000 mm, total width: 1,800 mm, total height: 1,550 mm, bed width: 650 mm, workpiece weight (max.): 10,500 kg, Motorized tailstock CE-Chuck cover protection Telescopic guide cover over guideways Steady rest  4 chuck 1000 mm diameter 3 chuck 500   mm diameter   2 Axis digital read out system DBC Turning Length: 5000mm Swing over bed Ø: 1150mm Swing over cross slide Ø:850mm Spindle bore: 105mm Bed width: 650mm Tailstock spindle Ø: 140Ø Stroke pinole: 300mm Redpfswrxpbsx Aazon Spindle taper: 6Mk Speeds / ranges: 4,5 - 900Rpm Workpiece load: 8000 Length: 8000mm Width: 1800mm Height: 1550mm Weight: 13800kg

Condition: used, Year of construction: 1986, Technical details: turning diameter over bed: 1000 mm turning diameter over slide rest: 745 mm Rodpfx Aajvgmlnezen turning length: 3000 mm turning speed range: 4,5 - 900 U/min spindle bore: 110 mm max. workpiece weight between centres: 12500 kg total power requirement: 30 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 5,2 x 2,3 x 2 m 3-axes digital readout rapid feed, feed at upper support 350 mm 1 fixed steady face plate diameter 1000 mm coolant attachment *

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 131720 € 2489.51 € 1020 mm 2000 mm 510 mm 358 mm 770 mm 560 mm 361 M 12 6,3 - 3 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 Rjdpfxewiq Dre Aazen 505 mm 270 mm 105 mm 6 MK 225 mm 18,5 kW 6400 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type D1, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 660 mm on both sides of the spindle, max. 250 rpm,gripping range 5-400 mm. Option: hard top special jaws (outside only), gripping range 80-400 mm 2 pcs. steady rests on supports Dm. 160 - 360 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.

Condition: new, neu Bulgarien 115600 € 2184.84 € 1090 mm 3000 mm 500 mm 155 mm 690 mm Rsdpfswiqv Uex Aazsn 700 mm 15 160 M 24 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 525 mm 270 mm 125 mm 6 MK 260 mm 22 kW 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS turning length1.500 mm € 101 220,00 turning length2.000 mm € 104 720,00 turning length4.000 mm € 123 610,00 turning length5.000 mm € 134 700,00 turning length6.000 mm € 151 230,00

Condition: new, neu Rsdpfx Ajwiqwfsazen Bulgarien 122250 € 2310.53 € 1320 mm 3000 mm 625 mm 155 mm 940 mm 700 mm 15 160 M 5 - 1000 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 685 mm 270 mm 125 mm 6 MK 260 mm 8550 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 107 770,00 turning length2.000 mm € 112 550,00 turning length4.000 mm € 130 160,00 turning length5.000 mm € 141 250,00 turning length6.000 mm € 157 780,00

Condition: refurbished (used), turning diameter over cross slide: 1,550 mm, turning diameter: 1,550 mm, turning diameter over bed slide: 2,000 mm, turning length: 10,000 mm, Modernization Status The lathe is currently undergoing modernization. The scope of completed and ongoing work includes: bed regrinding, headstock overhaul, tailstock and carriage overhaul. The final modernization completion date depends on: the selected tooling system, the availability of the planetary gearbox. Technical Data Centre height: 1,000 mm Swing over bed: 2,000 mm Max. turning diameter: 1,550 mm Turning length: 10,000 mm Spindle bore: Ø 105 mm Main motor power: 71 kW Maximum spindle torque: 40,000 Nm Chuck diameter: Ø 1,600 mm Tooling system: tool post, turret head or flat-bed carriage – to be agreed Control system: Siemens Sinumerik ONE Number of spindle speed ranges: 3 Max. spindle speed: up to 250 rpm (for Ø 1,600 mm chuck) Rapid traverse (longitudinal / cross): 4,000 mm/min Tailstock quill diameter: Ø 280 mm Tailstock quill travel: 200 mm Load Capacity Max. workpiece weight between centres: 30,000 kg With one steady rest: 35,000 kg With two steady rests: 40,000 kg Machine Dimensions and Weight Height: 2,400 mm Width: 3,000 mm Overall length: 15,700 mm (turning length + 5,700 mm) Roden Up R Sepfx Aazsn Lathe weight TCF 200 × 10 m: approx. 46,000 kg Additional Information The customer may inspect the machine and the progress of the modernization on site at ZAK, Poręba, Poland. IMPORTANT: The photos also show other lathes refurbished by our company (TCG, TCH300, TCE, etc.), as well as new TRP and TRB lathes.

Condition: excellent (used), Brand:GEMINIS Redpevnz Hvsfx Aazen Model: GE 650 Distance between centres: 2.000 mm Height of centers 315 mm Swing over bed: 650 mm Swing over slide: 390 mm Max. Swing over neckline: 820 mm Neckline length: 310 mm Slide longitudinal width: 620 mm Slide traverse width: 250 mm Cross slide traverse: 360 mm Superior charriot traverse: 220 mm Tailstock axis traverse: 270 mm Quill diameter: 85 mm Bed width: 450mm

Condition: good (used), Spindle bore diameter 250 mm Distance between points 6.000mm Height between points 600mm Diameter admitted on bench 1.200mm Diameter admitted on carriage 910mm Rodpfxsfv Aiue Aazjn Admitted diameter on neck 1,500mm Neck length 410mm Bench width 630mm Course transversal cart 670mm Course charriot superior 200mm Course counterpoint shaft 250mm Diameter axis tailstock 120mm